Reabsorción dentinaria interna coronaria: informe de un caso clínico / Coronary internal dentine resorption: report of a clinical case

Objetivo: La reabsorción dentinaria interna es un pro- ceso causado por la actividad odontoclástica asociada princi- palmente a la inflamación pulpar crónica y/o traumatismos, y se caracteriza por la pérdida progresiva de tejido dentinario y la posible invasión al cemento. El presente informe describe el diagnóstico y tratamiento de un molar inferior que presentó un cuadro sintomático de reabsorción dentinaria interna. Caso clínico: Un paciente de 38 años fue derivado a la consulta por presentar una zona de reabsorción interna en un segundo molar inferior. Durante el examen clínico y ra- diográfico se tomó una radiografía preoperatoria periapical con radiovisiógrafo en la que se observó la presencia de un área compatible con el diagnóstico de reabsorción dentinaria interna, el que fue posteriormente confirmado por medio de una tomografía computada de haz cónico. La imagen de la lesión se presentó como una zona radiolúcida deformante de bordes nítidos, localizada a nivel de la cámara pulpar. El tra- tamiento consistió en la extirpación de la pulpa coronaria y de la instrumentación, desinfección y obturación de los conduc- tos radiculares y la cavidad de acceso. En el control clínico y radiográfico realizado luego de 3 años se observó que el paciente estaba asintomático y las estructuras perirradiculares se encontraban dentro de los límites normales. La observación histológica del material removido de la cámara pulpar reveló la presencia de un tejido granulomatoso con numerosos vasos sanguíneos y escasos focos micro hemorrágicos. Hasta el momento, el tratamiento endodóntico es el pro- cedimiento indicado para el tratamiento de la reabsorción dentinaria interna. Se destaca la importancia de la tomografía computada de haz cónico para el diagnóstico y tratamiento temprano de las reabsorciones dentinarias internas a efectos de contar con un pronóstico favorable (AU)

Aim: Internal dentine resorption is aprocess caused by odontoclastic activity, mainly associated with chronic pulpal inflammation and/or trauma, and it'scharacterized by a pro- gressive loss of dentine tissue and the possible invasion of the cementum. This report describes the diagnosis and treatment of a lower molar that presented a symptomatic case of inter- nal dentine resorption. Clinical case: A 38-years old patient was referred to the office because of presenting an area of internal resorption in a lower second molar. During clinical and radiographic exam- ination, a periapical preoperative radiograph with radiovisio- graph was taken, in which the presence of an area compatible with the diagnosis of internal dentine resorption was observed, which was later confirmed by a cone-beam computed tomog- raphy.The image of the lesion was presented as a deforming radiolucent area with sharp edges, located at pulp chamber level. Treatment consisted of the removal of the coronary pulp and the instrumentation, disinfection and filling of the root ca- nals and the access cavity. In the clinical and radiographic control carried out 3 years after procedure, it was observed that the patient was asymptomatic and the periradicular struc- tures were within normal limits. The histological observation of the removed material from the pulp chamber revealed the presence of a granulomatous tissue with numerous blood ves- sels and scarce micro hemorrhagic focus. Until now, the endodontic treatment is the indicated pro- cedure to treat internal dentine resorption. It is necessary to highlight the importance of the cone-beam computerized to- mography for the early diagnosis and treatment of internal dentine resorptions in order to have a favorable outlook (AU)

Reattachment of anterior fractured teeth: effect of materials and techniques on impact strength.

BACKGROUND/AIM: The reattachment of dental fragments, as a conservative treatment, should be the first choice to restore fractured teeth. Therefore, the aim of this study was to evaluate the effect of different materials and reattachment techniques on impact strength of bovine incisors. MATERIAL AND METHODS: Standardized fragments were obtained when 80 crowns were sectioned 12 mm from the incisal edge. Teeth were mounted in PVC rings, embedded in acrylic resin and polyether to simulate bone support and periodontal ligament. Specimens were distributed in nine groups (n = 10), according to the reattachment technique (Direct bonding or Circumferential chamfer); the adhesive system (Single Bond or Clearfil SE Bond); and the intermediated material (Filtek Z350 Flow or Rely X CRA). Sound teeth composed the control group. Circumferential chamfer was prepared after the bonding of the fragment by means of a spherical point and filled with the composite Filtek Z250. The impact strength was evaluated in a universal testing machine Instron. A compressive load was applied at a crosshead speed of 500 mm min(-1) on the buccal surface, 2 mm from the incisal edge. Data were submitted to anova and Ryan-Einot-Gabriel-Welsch Multiple Range test (5%). RESULTS: Mean value of impact strength for control group was 64.8 Kgf. The fragment reattachment using Circumferential chamfer was significantly superior to Direct Bonding. The use of Single Bond significantly increased the impact strength when compared to the use of Clearfil SE. There was no significant difference among Rely X and Filtek X350 Flow. CONCLUSION: No technique or material, when individually considered, was capable of achieving the mechanical strength of the sound teeth; however, the association of reattachment technique Circumferential chamfer with bonding system Single Bond could approximate the immediate impact strength of the restored teeth to that observed in the sound teeth.

Compressive strength recovery by composite onlays in primary teeth. Substrate treatment and luting agent effects.

OBJECTIVES: To evaluate 1% NaOCl treatment and two resin luting agent effects on compressive strength recovery in composite onlays on primary teeth and to analyze the fractures type. METHODS: Forty sound primary molars crowns were prepared in the standard machine and randomly divided into four groups (n=10): G1 (1% NaOCl/ 30 min+EnForce); G2 (without 1% NaOCl EnForce); G3 (1% NaOCl/ 30 min+Rely X); G4 (without 1% NaOCl+Rely X). The onlays were made using Z250 composite on plaster models. Ten sound teeth were used as control group (CG). All groups were submitted to compression mechanic test in a universal test machine INSTRON at 1mm/min cross-head speed. After that, the data (kgf) were submitted to ANOVA test (alpha=0.05). Finally, the fracture types were classified in a crescent scale (1-5) related with severity degree and submitted to Fisher's Exact Test (p<0.05). Scanning electronic microscope analysis was done in order to illustrate the fractures sites. RESULTS: The values of compressive strength of experimental groups did not differ each others neither from control group (p>0.05). The results from fracture type showed that types 5 and 4 fractures (most severe) present the highest percentage to experimental groups. Conversely, the CG showed higher percentage of fracture types 2 and 3. CONCLUSIONS: This research found that the composite onlays recovered the compressive strength compared to sound teeth, regardless of the substrate treatment and cement agent used. Nevertheless, no group showed similar type of fractures to CG, which had more frequency of less severe fracture types.

Influence of the remaining coronal structure on the resistance of teeth with intraradicular retainer.

The aim of this study was to compare the resistance of endodontically treated teeth with intraradicular retainer different amounts of remaining coronal structure. Fifty freshly extracted maxillary canines were endodontically treated and randomly assigned to five groups (n=10), as follows: group 1 (control) = teeth with custom cast post and core; group 2 = teeth without remaining coronal structure; group 3, 4 and 5 = teeth with 1 mm, 2 mm and 3 mm of remaining coronal structure, respectively. All specimens in groups 2 to 5 were restored with prefabricated post and resin core. The teeth were embedded in acrylic resin and the fracture strength was measured on a universal testing machine at 45 degrees to the long axis of the tooth until failure. Data were analyzed statistically by one-way analysis of variance and Tukey's test. There was no significant differences (p>0.05) between the control group and group 2, and between groups 3, 4 and 5 (p>0.05). Control group and group 2 had significantly higher resistance strength than groups 3, 4 and 5 (p<0.00001). The findings of this study showed that teeth without remaining coronal structure had significantly higher fracture strength than those with remaining coronal structure (1 mm, 2 mm and 3 mm). When the dental crown was not completely removed, the amount of remaining coronal dentin did not significantly affect the fracture strength of endodontically treated teeth with intraradicular retainer.