Dental diseases and dental wear as a proxy for dietary patterns in Hellenistic-early Roman Menainon, Sicily.

OBJECTIVE: This paper explores dental diseases and wear as a proxy for dietary patterns in Hellenistic-early Roman Menainon. MATERIALS: This study includes 166 individuals (4th-1st c. BCE). METHODS: Carious lesions, dental calculus, antemortem tooth loss, and dental wear were recorded to explore male-female and adult-juvenile differences, and to position Menainon in the broader Hellenistic/early Roman world through comparisons with published data from other sites. RESULTS: Males and females showed similar rates of dental diseases. Dental wear, in contrast, was systematically greater in males. Caries rates were high in both adults and juveniles, but adults showed more calculus. The population from Menainon had higher frequencies for calculus and carious lesions compared to contemporary Italian and Greek assemblages, and a similar frequency for antemortem tooth loss. CONCLUSION: Some sex-related differences in the dietary patterns of the Menainon population were visible but small. The diet of adults and juveniles must have been similar in terms of carbohydrate consumption but different with regard to protein consumption. The high frequency of carious lesions and calculus compared to other Greco-Roman sites suggests that this population must have had good access to dietary resources (protein and carbohydrates). SIGNIFICANCE: This paper provides insights on gender (sex-related) and age divisions in the Hellenistic/early Roman society through the exploration of food consumption in a Sicilian assemblage. LIMITATIONS: Dividing the assemblage by sex and age group reduced considerably the sample size. SUGGESTIONS FOR FURTHER RESEARCH: Stable isotopes and dental microwear analyses should be used to investigate dietary patterns further.

Dental wear and oral pathology among sex determined Early Bronze-Age children from Franzhausen I, Lower Austria.

The physical properties of diet and oral health throughout childhood play an important role in the development of human dentition, and differed greatly before the industrial revolution. In this study we examined dental wear and oral pathology in a sample of children from the Early Bronze-Age to investigate the physical and mechanical properties of childhood diet and related oral health. We explore cross-sectional age and sex-based variation of children in the sample. The analysis was carried out on the dentitions of 75 children, 978 teeth, excavated from the Early Bronze-Age cemetery Franzhausen I in Lower Austria. Presence of dental caries and calculus was recorded. Dental wear was measured using dentine exposure, occlusal topography, and dental microwear texture analysis. Sex determination was carried out using amelogenin peptide analysis. Caries were found in only 4 individuals (crude prevalence rate-5%, 95% CI 1% to 13%), affecting only 5 teeth (true prevalence rate-less than 1%). Dentine exposure was observed in over 70% of deciduous molars and dental wear measurements indicate a comparatively strong dental wear accumulation especially, among younger children, when compared to modern-day and later pre-industrial populations. Microwear textures presented a high complexity (Asfc > 2)/low anisotropy (epLsar < 1) profile, especially in older children. Differences between male and female children were not generally significant but increased dentine exposure was observed in the lower molars of younger female children. Our results suggest that the Early Bronze-Age children at Franzhausen I consumed a non-cariogenic diet, more abrasive and inclusive of harder/polyhedral foodstuffs than present-day children and some later Medieval children. Differences in dental wear accumulation were observed between children within the population, but with minimal variation between the sexes mostly occurring among younger children.

Diet-related dental wear in archaeological human populations of Chalcolithic and Bronze Age from North-Eastern Romania.

Dental macrowear is the non-pathological loss of hard tissues on the occlusal surface of the teeth. In archaeological contexts, the loss of tooth tissues is often correlated with lifestyles, habits, and with the physical properties of the consumed food - including preparation techniques. We report the first semiquantitative and quantitative assessment on dentine exposure of permanent second molars (M2) using the scale scoring technique, image analysis, and regression analysis on human teeth from Chalcolithic and Bronze Age archaeological populations discovered in North-Eastern Romania. We show an increase of dentine exposure percent (PDE) with the age-ranges, but no evidence of wear by sex were observed. In the linear regression analysis, the age and the dentine exposure percent, as variables, were correlated in 31% of the mandibular M2 molars and 49% in the maxillary ones (p < 0.001). Moreover, the multiple regression analysis involving the dentine exposure and the three variables that could influence the dental wear (i.e., age, occlusal area, and period) revealed no differences in dental wear between Chalcolithic and Bronze Age, as well as between different cultures of Bronze Age (i.e., Monteoru Culture and Noua Culture). Therefore, apart from age, occlusal area, and period, there may be other factors including diet and food-processing techniques that could be also considered when discussing the loss of tooth tissues in archaeological populations, especially farmers.

Effect of the toothbrush tuft arrangement and bristle stiffness on the abrasive dentin wear.

The geometrical properties of toothbrushes play a role in developing abrasive tooth wear and non-carious cervical lesions. This study investigated the interplay between the toothbrush tuft arrangement (crossed vs. parallel) and bristle stiffness (soft vs. medium) on the abrasive dentin wear using three slurries with different levels of abrasivity (RDA: 67, 121 and 174). Twelve groups of bovine dentin samples (n = 20) were brushed with a combination of the aforementioned variables. Abrasive dentin wear was recorded with a profilometer and the resulting abrasive wear of each group was calculated and compared with each other using two-way ANOVA and pairwise tests. Toothbrushes with parallel tuft arrangement caused statistically significantly higher dentin wear compared to crossed tuft arrangement, regardless of the abrasivity level of the used slurry and the bristle stiffness. Soft crossed tuft toothbrushes caused statistically significantly higher abrasive dentin wear than medium crossed tuft toothbrushes, while soft and medium parallel tuft toothbrushes caused the same amounts of dentin wear, regardless of the RDA value of the used slurry. These results could be helpful for dentists and dental hygienists when advising patients. Crossed tuft toothbrushes could be a less-abrasive choice in comparison to parallel tuft toothbrushes.

Dental wear patterns reveal dietary ecology and season of death in a historical chimpanzee population.

Dental wear analyses have been widely used to interpret the dietary ecology in primates. However, it remains unclear to what extent a combination of wear analyses acting at distinct temporal scales can be beneficial in interpreting the tooth use of primates with a high variation in their intraspecific dietary ecology. Here, we combine macroscopic tooth wear (occlusal fingerprint analysis, long-term signals) with microscopic 3D surface textures (short-term signals) exploring the tooth use of a historical western chimpanzee population from northeastern Liberia with no detailed dietary records. We compare our results to previously published tooth wear and feeding data of the extant and continually monitored chimpanzees of Taї National Park in Ivory Coast. Macroscopic tooth wear results from molar wear facets of the Liberian population indicate only slightly less wear when compared to the Taї population. This suggests similar long-term feeding behavior between both populations. In contrast, 3D surface texture results show that Liberian chimpanzees have many and small microscopic wear facet features that group them with those Taї chimpanzees that knowingly died during dry periods. This coincides with historical accounts, which indicate that local tribes poached and butchered the Liberian specimens during dust-rich dry periods. In addition, Liberian females and males differ somewhat in their 3D surface textures, with females having more microscopic peaks, smaller hill and dale areas and slightly rougher wear facet surfaces than males. This suggests a higher consumption of insects in Liberian females compared to males, based on similar 3D surface texture patterns previously reported for Taї chimpanzees. Our study opens new options for uncovering details of feeding behaviors of chimpanzees and other living and fossil primates, with macroscopic tooth wear tracing the long-term dietary and environmental history of a single population and microscopic tooth wear addressing short-term changes (e.g. seasonality).

Reliability of qualitative occlusal tooth wear evaluation using an intraoral scanner: A pilot study.

Dental wear analysis through the use of an intraoral scanner is a reality of modern dentistry. This study aimed to investigate the reliability of qualitative tooth wear evaluation through three-dimensional images captured with an intraoral scanner and compared to clinical and photographic examinations. Eighteen adult volunteers of both genders (18 to 55 years old) were submitted to clinical exams, intraoral photographs and intraoral scanning protocol using an optical scanner (TRIOS® Pod, 3Shape, Copenhagen, Denmark). Occlusal tooth wear, from second to second premolars, was measured by two evaluators and reevaluated after 30 days, according to a slight modification of the method described by Mockers et al. Weighted Kappa was used to measure intra and inter-examiner agreement. The Friedman test was used to verify the differences among methods. Random and systematic errors were assessed using Bland-Altman plots. All statistical analysis was performed with p<0.05. There was a substantive agreement for clinical (K = 0.75) and photographic exams (K = 0.79) and a moderate agreement for intraoral scanner analysis (K = 0.60) for inter-examiner evaluation. A substantial intra-examiner agreement was obtained for both evaluators. No significant difference between the methods was observed (p = 0.7343 for examiner 1 and 0.8007 for examiner 2). The Bland-Altman plot confirmed no systematic errors between the methods and a random error of 0.25 with the scanner method when compared to clinical assessment. All three methods showed reliability in qualitative occlusal tooth wear evaluation. Intraoral scanning seems to be a sound and reliable tool to evaluate tooth wear when compared to traditional methods, considering the lower inter-examiner agreement and the inherent limitations of this pilot study. Further research will be necessary in order to achieve more robust evidence.

Dental microwear of a basal ankylosaurine dinosaur, Jinyunpelta and its implication on evolution of chewing mechanism in ankylosaurs.

Jinyunpelta sinensis is a basal ankylosaurine dinosaur excavated from the mid Cretaceous Liangtoutang Formation of Jinyun County, Zhejiang Province, China. In the present study, its dental microwear was observed using a confocal laser microscope. Jinyunpelta had steep wear facets that covered most of buccal surfaces of posterior dentary teeth. Observation of dental microwear on the wear facet revealed that scratch orientation varied according to its location within the wear facet: vertically (i.e. apicobasally) oriented scratches were dominant in the upper half of the wear facet, and horizontally (i.e. mesiolaterally) oriented ones were in the bottom of the facet. These findings indicated that Jinyunpelta adopted precise tooth occlusion and biphasal jaw movement (orthal closure and palinal lower jaw movement). The biphasal jaw movement was widely observed among nodosaurids, among ankylosaurids, it was previously only known from the Late Cretaceous North American taxa, and not known among Asian ankylosaurids. The finding of biphasal jaw movement in Jinyunpelta showed sophisticate feeding adaptations emerged among ankylosaurids much earlier (during Albian or Cenomanian) than previously thought (during Campanian). The Evolution of the biphasal jaw mechanism that contemporaneously occurred among two lineages of ankylosaurs, ankylosaurids and nodosaurids, showed high evolutionary plasticity of ankylosaur jaw mechanics.

The effect of high wear diets on the relative pulp volume of the lower molars.

OBJECTIVES: One role of dental pulp is in the upkeep and maintenance of dentine. Under wear, odontoblasts in the pulp deposit tertiary dentine to ensure the sensitive internal dental tissues are not exposed and vulnerable to infection. It follows that there may be an adaptive advantage for increasing molar pulp volume in anthropoid primate taxa that are prone to high levels of wear. The relative volume of dental pulp is therefore predicted to covary with dietary abrasiveness (in the sense of including foods that cause high degrees of wear). MATERIALS AND METHODS: We examined relatively unworn lower second molars in pairs of species of extant hominoids, cebids, and pitheciids that vary in the abrasiveness of their diet (n = 36). Using micro-CT scans, we measured the percent of tooth that is pulp (PTP) as the ratio of pulp volume to that of the total volume of the tooth. RESULTS: We found that in each pair of species, the taxa that consume a more abrasive diet had a significantly higher PTP than the closely related taxa that consume a softer diet. CONCLUSIONS: Our results point to an adaptive mechanism in the molars of taxa that consume abrasive diets and are thus subject to higher levels of wear. Our results provide additional understanding of the relationship between dental pulp and diet and may offer insight into the diet of extinct taxa such as Paranthropus boisei or into the adaptive context of the taurodont molars of Neanderthals.

A functional analysis of Carabelli trait in Australian aboriginal dentition.

OBJECTIVES: Carabelli is a nonmetric dental trait variably expressed as a small pit to a prominent cusp in the maxillary molars of modern humans. Investigations on the occurrence and expression rates of this trait have been conducted extensively, tracing its origin to genetic sources. However, there remains a lack of understanding about its potential role in chewing. In this study, we examine molar macrowear with the aim of reconstructing Carabelli trait occlusal dynamics occurring during chewing. METHODS: We have examined 96 deciduous and permanent maxillary molars of children and young adults from Yuendumu, an Australian Aboriginal population that was at an early stage of transition from a nomadic and hunter-gatherer way of life to a more settled existence. We apply a well-established method, called Occlusal Fingerprint Analysis, which is a digital approach for analyzing dental macrowear allowing the reconstruction of jaw movements required to produce wear pattern specific to each tooth. RESULTS: Carabelli trait slightly enlarges the surface functional area, especially in those molars where this feature is expressed in its cuspal form and it is closer to the occlusal plane. Moreover, the highly steep contact planes would also indicate that Carabelli wear areas contribute to increasing the shearing abilities of the occluded teeth, which are particularly important when processing fibrous and tough foods. CONCLUSIONS: The macrowear analysis suggests that Carabelli trait in the Aboriginal people from Yuendumu slightly enhanced occlusion and probably played some functional role during mastication. Future biomechanical and microwear analyses could provide additional information on the mechanical adaptation of Carabelli trait in modern human dentition.

Exploring late Paleolithic and Mesolithic diet in the Eastern Alpine region of Italy through multiple proxies.

OBJECTIVES: The analysis of prehistoric human dietary habits is key for understanding the effects of paleoenvironmental changes on the evolution of cultural and social human behaviors. In this study, we compare results from zooarchaeological, stable isotope and dental calculus analyses as well as lower second molar macrowear patterns to gain a broader understanding of the diet of three individuals who lived between the end of the Late Pleistocene and the Early Holocene (ca., 17-8 ky cal BP) in the Eastern Alpine region of Italy. MATERIALS AND METHODS: We analyze individuals buried at the sites of Riparo Tagliente (Verona), Riparo Villabruna, and Mondeval de Sora (Belluno). The three burials provide a unique dataset for diachronically exploring the influence of climatic changes on human subsistence strategies. RESULTS: Isotopic results indicate that all individuals likely relied on both terrestrial and freshwater animal proteins. Even though dental calculus analysis was, in part, hindered by the amount of mineral deposit available on the teeth, tooth macrowear study suggests that the dietary habits of the individuals included plant foods. Moreover, differences in macrowear patterns of lower second molars have been documented between Neanderthals and modern humans in the present sample, due to a prevalence of Buccal wear among the former as opposed to higher values of Lingual wear in modern human teeth. DISCUSSION: Isotopic analyses have emphasized the contribution of animal proteins in the diet of the three foragers from the Eastern Alpine region. The possible intake of carbohydrate-rich plant foods, suggested by the retrieval of plant remains in dental calculus, is supported by the signal of macrowear analysis. Moreover, the latter method indicates that the distribution of macrowear in lower second molars (M2 s) allows us to discriminate between Neanderthals and modern humans within the present reference sample. Overall, our results show these three prehistoric hunter-gatherers were well adapted to the environment in which they lived exploiting many natural resources.

Correlations between dental wear and oral cavity characteristics: Mandibular torus, palatine torus, and oral exostoses.

OBJECTIVE: This study evaluates the correlations amongst mandibular torus, palatine torus, oral exostoses to dental wear/loss and temporomandibular damage. METHODS: The sample consists of 504 skulls from the Hamann-Todd Osteological Collection; 223 African American and 281 European Americans aged between 30 and 80 years. The sample was analyzed using Pearson's Chi-square for significance of sex, age, ancestry, and wear as well as the interactions between the demographic variables and the presence of mandibular torus, palatine torus and oral exostoses. RESULTS: Wear was statistically significant by age and sex but not ancestry. The maxillary exostoses varied significantly by age, ancestry and wear but not sex. Mandibular torus frequencies varied significantly by wear, sex and ancestry. The palatine torus varied significantly across wear groups, sex and ancestry. DISCUSSION: The etiology of nonmetric oral cavity characteristics, mandibular torus, palatine torus and oral exostosis, is complex. The degree to which traits' presence and expression is the result of genetic and environmental interactions is not fully understood. More than age, sex or ancestry, the degree of dental wear and tooth loss influences the presence and expression of the oral cavity traits. The sample can be characterized as the presence of exostoses in higher frequencies in young African American males with little tooth loss. Males of both ancestral groups with heavy wear have higher frequencies of mandibular tori than females. The palatine torus is more common in edentulous European American females.

Dimorphism in dental tissues: Sex differences in archaeological individuals for multiple tooth types.

OBJECTIVES: Dimorphism in the dentition has been observed in human populations worldwide. However, research has largely focused on traditional linear crown measurements. As imaging systems, such as micro-computed tomography (micro-CT), become increasingly more accessible, new dental measurements such as dental tissue size and proportions can be obtained. This research investigates the variation of dental tissues and proportions by sex in archaeological samples. MATERIALS AND METHODS: Upper and lower first incisor to second premolar tooth rows were obtained from 30 individuals (n = 300), from 3 archaeological samples. The teeth were micro-CT scanned and surface area and volumetric measurements were obtained from the surface meshes extracted. Dental wear was also recorded and differences between sexes determined. RESULTS: Enamel and crown measurements were found to be larger in females. Conversely, dentine and root measurements were larger in males. DISCUSSION: The findings support the potential use of dental tissues to estimate sex of individuals from archaeological samples, while also indicating that individuals aged using current dental aging methods may be underaged or overaged due to sex differences in enamel thickness.

Dietary diversity and evolution of the earliest flying vertebrates revealed by dental microwear texture analysis.

Pterosaurs, the first vertebrates to evolve active flight, lived between 210 and 66 million years ago. They were important components of Mesozoic ecosystems, and reconstructing pterosaur diets is vital for understanding their origins, their roles within Mesozoic food webs and the impact of other flying vertebrates (i.e. birds) on their evolution. However, pterosaur dietary hypotheses are poorly constrained as most rely on morphological-functional analogies. Here we constrain the diets of 17 pterosaur genera by applying dental microwear texture analysis to the three-dimensional sub-micrometre scale tooth textures that formed during food consumption. We reveal broad patterns of dietary diversity (e.g. Dimorphodon as a vertebrate consumer; Austriadactylus as a consumer of 'hard' invertebrates) and direct evidence of sympatric niche partitioning (Rhamphorhynchus as a piscivore; Pterodactylus as a generalist invertebrate consumer). We propose that the ancestral pterosaur diet was dominated by invertebrates and later pterosaurs evolved into piscivores and carnivores, shifts that might reflect ecological displacements due to pterosaur-bird competition.

A critical assessment of the potential for Structure-from-Motion photogrammetry to produce high fidelity 3D dental models.

OBJECTIVES: The recent proliferation of methods of 3D model generation has enabled the development of new approaches to the analysis of dental form, function and wear. This article assesses whether Structure-from-motion (SfM) photogrammetry is capable of producing virtual 3D models of teeth of adequate quality for assessing fine scale surface details, such as dental macrowear patterns. Reference models were generated using a high resolution structured light scanner to assess the accuracy of the photogrammetric models generated. MATERIALS AND METHODS: Dental gypsum models of the molar teeth of human individuals from St. Michael's Litten, Chichester, Post-medieval assemblage (n = 17) were used for 3D model generation. Photogrammetry was performed using Agisoft Metashape and reference 3D models were generated using a GOM ATOS 80 scanner. Focus stacking was explored as a method of enhancing 3D model detail. Differences between the photogrammetric and reference models were assessed using CloudCompare and the quality of the surface detail was examined quantitatively using Occlusal Fingerprint Analysis. RESULTS: Photogrammetric model generation was highly replicable and the tooth models produced closely approximated the overall geometry of those derived from the structured light scanner. Dental wear facet area measurements on the photogrammetric models differed significantly, however, from those derived from the structured light scanning reference models. DISCUSSION: Photogrammetry can create virtual dental models from which crude quantitative size and shape data can be obtained. Finer scale surface details are not accurately reproduced on SfM models using the methods outlined in the current article due to high levels of surface noise.

Dental topographic change with macrowear and dietary inference in Homunculus patagonicus.

Homunculus patagonicus is a stem platyrrhine from the late Early Miocene, high-latitude Santa Cruz Formation, Argentina. Its distribution lies farther south than any extant platyrrhine species. Prior studies on the dietary specialization of Homunculus suggest either a mixed diet of fruit and leaves or a more predominantly fruit-eating diet. To gain further insight into the diet of Homunculus, we examined how the occlusal surfaces of the first and second lower molars of Homunculus change with wear by using three homology-free dental topographic measures: Dirichlet normal energy (DNE), orientation patch count rotated (OPCR), and relief index (RFI). We compared these data with wear series of three extant platyrrhine taxa: the folivorous Alouatta, and the frugivorous Ateles and Callicebus (titi monkeys now in the genus Plecturocebus). Previous studies found Alouatta and Ateles exhibit distinctive patterns of change in occlusal morphology with macrowear, possibly related to the more folivorous diet of the former. Based on previous suggestions that Homunculus was at least partially folivorous, we predicted that changes in dental topographic metrics with wear would follow a pattern more similar to that seen in Alouatta than in Ateles or Callicebus. However, wear-induced changes in Homunculus crown sharpness (DNE) and complexity (OPCR) are more similar to the pattern observed in the frugivorous Ateles and Callicebus. Based on similar wear modalities of the lower molars between Homunculus and Callicebus, we infer that Homunculus had a primarily frugivorous diet. Leaves may have provided an alternative dietary resource to accommodate fluctuation in seasonal fruiting abundance in the high-latitude extratropical environment of late Early Miocene Patagonia.

Buccal dental-microwear and feeding ecology of Early Pleistocene Theropithecus oswaldi from Cueva Victoria (Spain).

Despite the scarcity of fossil specimens of Theropithecus oswaldi in Eurasia, its presence out of Africa attests to the great dispersal of this Papionini genus during the Early Pleistocene. In the present study, we analyze the buccal dental microwear of T. oswaldi (T. o. leakeyi) fossil specimens from Cueva Victoria (Southeastern Spain). This analysis is the first characterization of the feeding ecology of T. oswaldi in Europe. The buccal microwear pattern of the molar and premolar teeth of T. oswaldi from Cueva Victoria shows great similarities to that observed for the extant frugivorous forest-dwelling Mandrillus sphinx and mangabeys (Cercocebus sp.)-both species adapted to durophagous dietary habits-while significantly different from that observed for the gramnivorous Theropithecus gelada. These results suggest that T. oswaldi from Cueva Victoria could have exploited both hard-shelled fruits or seeds and succulent fruits from open and forested Mediterranean ecosystems.

Biocultural diversity in Late Pleistocene/Early Holocene Africa: Olduvai Hominid 1 (Tanzania) biological affinity and intentional body modification.

OBJECTIVES: The dentition of Olduvai Hominid 1 (OH1) exhibits an anomalous pattern of dental wear that was originally attributed to either intentional cultural modification (filing) or plant processing behaviors. A differential diagnosis of the wear and assessment of the biological affinity of OH1 is presented. MATERIALS AND METHODS: Macroscopic and microscopic observations of all labial and buccal tooth surfaces were undertaken to assess wear patterns. A multivariate analysis of mandibular morphology of OH1 compared to other Late Pleistocene, Holocene, and recent modern humans was used to ascertain biological affinity. RESULTS: The morphological variation of the OH1 mandible is closely aligned with variation in penecontemporaneous fossils from Africa and outside that of recent humans. The concave wear facets exposing dentin on the labial surfaces of all three preserved mandibular incisors is confirmed. Substantial loss of labial/buccal surfaces was documented on the surfaces of all in situ maxillary and mandibular canines, premolars, and molars ranging from distinct facets with well-defined edges, to blunting or "polishing" around areas of maximum buccal curvature. The wear on both the anterior and postcanine teeth closely resemble that caused by adornments ("labrets") worn in lower-lip and buccal facial piercings known from bioarchaeological and ethnographic contexts. The wear pattern suggests that the OH1 wore three facial piercings-two buccal/lateral and a medial one in the lower lip. DISCUSSION: Our findings suggest that the expression of social identities through intentional body modification is more diverse than previously documented elsewhere in Africa during the Late Pleistocene (i.e., ablation) and Early Holocene (i.e., ablation, chipping, and filing).

The dental microwear of hard-object feeding in laboratory Sapajus apella and its implications for dental microwear formation.

OBJECTIVES: This study seeks to determine if (a) consumption of hard food items or a mixture of food items leads to the formation of premolar or molar microwear in laboratory capuchin monkeys (Sapajus apella) in one feeding session and (b) rates of microwear formation are associated with the number of food items consumed. MATERIALS AND METHODS: Five adult male capuchins were used in two experiments, one where they were fed unshelled Brazil nuts, and the other where they were fed a mixture of food items. Dental impressions were taken before and after each feeding session. Epoxy casts made from those impressions then were used in SEM analyses of rates of microwear formation. Upper and lower premolars and molars were analyzed. Qualitative comparisons were made and Spearman's rank-order correlations used to examine the relationship between rates of microwear formation and number of Brazil nuts consumed. RESULTS: Premolars and molars generally showed new microwear in the form of pits and scratches. However, the incidence of those features was low (0-6%). Rates of microwear formation were highest during the consumption of Brazil nuts. DISCUSSION: Variations in the rate of microwear formation on the premolars likely reflected patterns of ingestion whereas consistency in the rate of microwear on the molars likely reflected patterns of chewing. While dental microwear formation seemed to be correlated with the number of hard objects consumed, rates did differ between individuals. Differences in results between the two experiments demonstrate some of the limitations in our knowledge of dental microwear formation.

[Cup-shaped tooth wear defects: more than erosive challenges?] / Komvormige defecten in occlusale vlakken van molaren: meer dan alleen erosieve belasting?

The underlying mechanism of the development of cups and grooves on occlusal tooth surfaces is still unclear. The aim of this study was to evaluate factors contributing to in-vitro cup formation, and to elucidate the clinical process. Extracted human molar teeth were exposed to acidic aqueous solutions at pH of 4.8 and 5.5 in combination with different loading conditions: no load (0N, control), 30N or 50N. Before and after 3 months exposure, the samples were scanned using a non-contact profilometer. A statistically significant difference between a loading of 0N and 50N was found at pH 4.8 (p < 0.002). Cup shaped lesions had formed only at pH of 4.8, in the 30N and 50N groups. The study showed that a cup can arise fully in enamel and that this requires simultaneous acidic and mechanical loading.

Age-related tooth wear in African rainforest hunter-gatherers.

OBJECTIVES: Central African small-scale foragers subsist primarily on hunting game activities and wild plant-food gathering. Starch-rich tubers are underground storage organs (USOs) and staple food resources in savanna and tropical rainforests. However, little is known about the effect of USO consumption on tooth wear development in living hunter-gatherers. We report age- and sex-dependent tooth wear rates in forest-dwelling Baka Pygmies with well-documented wild-yam-tuber-based diet to explore the long-term impact of USO mechanical hardness and abrasiveness on the wearing down of the teeth. MATERIALS AND METHODS: Percentages of dentine exposure (PDEs) of permanent left mandibular first molars (M1 ) were recorded using in vivo high-resolution replicas of Baka individuals (aged 8-33 years), inhabiting Le Bosquet district in Cameroon (Western Africa). Regression and covariance analyses were used to test the effect of individual aging by sex on PDE rates. RESULTS: We found a strong increase of PDE by age among Baka individuals. No evidence of sexual dimorphism in wear patterns suggests similar sex-related dietary and masticatory demands during growth. Overall, greatest dentine exposure values ≈4% denote unexpected slow wear down rates for foraging diets relying on USO consumption. DISCUSSION: The low molar wear rates with age found in Baka Pygmies contrast with extensive wear rates in savanna-dwelling foragers, reflecting differences in thermal processing techniques affecting fracture toughness and grittiness of mechanically challenging foods. Our findings reveal that culture-specific dietary proclivities influence tooth wear among foraging behaviors with important implications in hominin dietary versatility and abrasive stress on chewing surfaces.