Bizarre parosteal osteochondromatous proliferation in the distal ulna where the lesion is continuous with the medullary cavity: a case report.

BACKGROUND: Bizarre parosteal osteochondromatous proliferation (BPOP) is a rare benign bone tumor, it is also called "Nora's lesion". The lesion is characterized by heterotopic ossification of the normal bone cortex or parosteal bone. The etiology of BPOP is unclear and may be related to trauma. In most BPOPs, the lesion is not connected to the medullary cavity. Here we report an atypical case, characterized by reversed features compared to the typical BPOP, which demonstrated continuity of the lesion with the cavity. CASE PRESENTATION: An 11-year-old female child had a slow-growing mass on her right wrist for 8 months with forearm rotation dysfunction. Plain X-rays showed an irregular calcified mass on the right distal ulna, and computed tomography (CT) showed a pedunculated mass resembling a mushroom protruding into the soft tissue at the distal ulna. The medulla of this lesion is continuous with the medulla of the ulna. A surgical resection of the lesion, together with a portion of the ulnar bone cortex below the tumor was performed, and the final pathology confirmed BPOP. After the surgery, the child's forearm rotation function improved significantly, and there was no sign of a recurrence at 1-year follow-up. CONCLUSION: It is scarce for BPOP lesions to communicate with the medullary cavity. However, under-recognition of these rare cases may result in misdiagnosis or inappropriate treatment thereby increasing the risk of recurrence. Therefore, special cases where BPOP lesions are continuous with the medulla are even more important to be studied to understand better and master these lesions. Although BPOP is a benign tumor with no evidence of malignant transformation, the recurrence rate of surgical resection is high. We considered the possibility of this particular disease prior to surgery and performed a surgical resection with adequate safety margins. Regular postoperative follow-up is of utmost importance, without a doubt.

An Automatic Method for Elbow Joint Recognition, Segmentation and Reconstruction.

Elbow computerized tomography (CT) scans have been widely applied for describing elbow morphology. To enhance the objectivity and efficiency of clinical diagnosis, an automatic method to recognize, segment, and reconstruct elbow joint bones is proposed in this study. The method involves three steps: initially, the humerus, ulna, and radius are automatically recognized based on the anatomical features of the elbow joint, and the prompt boxes are generated. Subsequently, elbow MedSAM is obtained through transfer learning, which accurately segments the CT images by integrating the prompt boxes. After that, hole-filling and object reclassification steps are executed to refine the mask. Finally, three-dimensional (3D) reconstruction is conducted seamlessly using the marching cube algorithm. To validate the reliability and accuracy of the method, the images were compared to the masks labeled by senior surgeons. Quantitative evaluation of segmentation results revealed median intersection over union (IoU) values of 0.963, 0.959, and 0.950 for the humerus, ulna, and radius, respectively. Additionally, the reconstructed surface errors were measured at 1.127, 1.523, and 2.062 mm, respectively. Consequently, the automatic elbow reconstruction method demonstrates promising capabilities in clinical diagnosis, preoperative planning, and intraoperative navigation for elbow joint diseases.

Effect of the Sauvé-Kapandji method on the wrist contact surface for distal radial ulnar joint disorders.

BACKGROUND: The Sauvé-Kapandji (S-K) method is a surgical procedure performed for chronic deformities of the distal radial ulnar joint (DRUJ). Changes to the joint contact surface from pre- to postoperatively under physiological in vivo conditions have not yet been determined for this useful treatment. The aim of the present study was therefore to compare the articular contact area of the wrist joint between before and after the S-K method for DRUJ disorders. METHODS: The SK method was performed for 15 patients with DRUJ osteoarthritis and ulnar impaction syndrome. We calculated the Mayo Wrist Score as the patient's clinical findings and created 3-dimensional bone models of cases in which the S-K method was performed and calculated the contact area and shift in the center of the contact area using customized software. RESULTS: The Mean modified Mayo Wrist Score improved significantly from 60.3 preoperatively to 80.3 postoperatively (P < 0.01). Scaphoid contact area to the radius increased significantly from 112.6 ± 37.0 mm2 preoperatively to 127.5 ± 27.8 mm2 postoperatively (P = 0.03). Lunate contact area to radius-ulna was 121.3 ± 43.3 mm2 preoperatively and 112.5 ± 37.6 mm2 postoperatively, but this decrease was not significant (P = 0.38). Contact area ratio of scaphoid to lunate increased significantly from 1.01 ± 0.4 preoperatively to 1.20 ± 0.3 postoperatively (P = 0.02). Postoperative translations of the center of the scaphoid and lunate contact areas were decomposed into ulnar and proximal directions. Ulnar and proximal translation distances of the scaphoid contact area were 0.8 ± 1.7 mm and 0.4 ± 0.6 mm, respectively, and those of the lunate contact area were 1.1 ± 1.7 mm and 0.4 ± 1.1 mm, respectively. This study revealed changes in wrist contact area and center of the contact area before and after the S-K method. CONCLUSION: These results may accurately indicate changes in wrist joint contact area from pre- to postoperatively using the S-K method for patients with DRUJ disorder. Evaluation of changes in contact area due to bone surface modeling of the wrist joint using 3DCT images may be useful in considering surgical methods.

Association between carpal height ratio and ulnar variance in normal wrist radiography.

INTRODUCTION: The wrist joint is a complex anatomical structure, and various radiographic parameters are utilized to assess its normal alignment and orientation. Among these parameters are carpal height ratio (CHR) and ulnar variance (UV). Previous literature has indicated that factors such as age and gender may influence these parameters; However, there is a lack of studies investigating these differences specifically in the Middle East or Jordan. Additionally, no prior research has explored the relationship between UV and CHR. Therefore, the objective of this study is to investigate these critical radiological parameters and their associations. METHODOLOGY: A cross-sectional study design was employed, wherein a total of 385 normal wrist X-rays were reviewed, and CHR and UV were measured. Intra-observer and inter-observer reliability assessments were conducted to ensure the consistency and accuracy of measurements. Additionally, the association between UV and CHR was measured and plotted for further analysis. RESULTS: In our study, the mean CHR was 0.5 (range: 0.4 to 1.5), and the mean UV was - 0.3 mm (range: -5.8 mm to 4.1 mm). We found a significant negative correlation between CHR and age (p < 0.05). No significant gender differences were observed in UV and CHR. Additionally, a weak positive correlation was found between UV and CHR (Pearson correlation coefficient = 0.13, p = 0.01; adjusted R2 = 0.014, p = 0.02). CONCLUSION: Age correlated significantly with a decline in carpal height ratio. Additionally, ulnar variance had a week positive yet significant correlation with carpal height ratio. LEVEL OF EVIDENCE: Cross-sectional study, Level III.

Radiographic evaluation of the forelimb bone development in maned wolves (Chrysocyon brachyurus).

This study aimed to assess the fusion of growth plates and the development of secondary ossification centres in the forelimb bones of maned wolves (Chrysocyon brachyurus), contrasting the findings with established data from domestic dogs. Three maned wolves, comprising one male and two females, initially aged between 3 and 4 months, were subjected to monthly radiographic evaluations until 10-11 months of age, followed by bimonthly assessments until 18-19 months of age, encompassing both forelimbs. The closure times of growth plates were observed as follows: supraglenoid tubercle (7-8 months), proximal humerus (17-19 months), distal humerus (8-9 months), medial epicondyle of the humerus (8-9 months), proximal ulna (9-10 months), proximal radius (13-15 months), distal ulna (13-15 months) and distal radius (17-19 months). Statistical analysis revealed significant differences in the areas of secondary ossification centres in the proximal epiphyses of the humerus and radius, respectively, observed from the initial evaluation at 8-9 months and 6-7 months. Conversely, the epiphyses of the supraglenoid tubercle, distal humerus, proximal ulna, distal ulna, medial epicondyle of the humerus and distal radius did not exhibit significant area differences between 3-4 months and 4-5 months, yet notable distinctions emerged at 5-6 months. In summary, while the radiographic appearance of epiphyseal growth plates and secondary ossification centres in maned wolves resembles that of domestic dogs, closure times vary. These findings contribute to understanding the dynamics of epiphyseal growth plates in this species.

Automatic identification of radius and ulna bone landmarks on 3D virtual models.

BACKGROUND: For bone morphology and biomechanics analysis, landmarks are essential to define position, orientation, and shape. These landmarks define bone and joint coordinate systems and are widely used in these research fields. Currently, no method is known for automatically identifying landmarks on virtual 3D bone models of the radius and ulna. This paper proposes a knowledge-based method for locating landmarks and calculating a coordinate system for the radius, ulna, and combined forearm bones, which is essential for measuring forearm function. This method does not rely on pre-labeled data. VALIDATION: The algorithm is validated by comparing the landmarks placed by the algorithm with the mean position of landmarks placed by a group of experts on cadaveric specimens regarding distance and orientation. RESULTS: The median Euclidean distance differences between all the automated and reference landmarks range from 0.4 to 1.8 millimeters. The median angular differences of the coordinate system of the radius and ulna range from -1.4 to 0.6 degrees. The forearm coordinate system's median errors range from -0.2 to 2.0 degrees. The median error in calculating the rotational position of the radius relative to the ulna is 1.8 degrees. CONCLUSION: The automatic method's applicability depends on the use context and desired accuracy. However, the current method is a validated first step in the automatic analysis of the three-dimensional forearm anatomy.

P. aeruginosa infection of the ulna, a rare complication after arterial puncture.

Pseudomonas aeruginosa, a Gram-negative bacterium known to induce severe infections, is seldomly reported in scientific literature as a contributor of osteomyelitis. In this case report, a 71-year-old woman exhibited recurring infections and enduring forearm pain. A subsequent MRI revealed osteomyelitis in the distal ulna, linked to an arterial blood gas sample taken months earlier. Despite undergoing multiple extended courses of antibiotic treatment, the patient eventually underwent surgery on her left forearm. Biopsy cultures conclusively confirmed the presence of P. aeruginosa.

Ulnar bone tuberculosis in children: Case report and literature review.

RATIONALE: Tuberculosis of the long tubular bones in children's extremities is infrequent, particularly in the ulna. Early diagnosis poses significant challenges. This report presents a case involving a 2-year-old child with tuberculosis of the ulnar bone, accompanied by a comprehensive review of pertinent literature. The purpose of this study is to share diagnostic and therapeutic experiences and provide potentially valuable insights. PATIENT CONCERNS: In this case, the patient exhibited complete destruction and expansion of the ulnar bone, resulting in a forearm size considerably greater than normal. Concerns were raised about the irreversible deformation of the ulna, the potential for a malignant bone tumor, and its impact on forearm function, potentially endangering the patient's life. DIAGNOSES: The diagnosis was confirmed as tuberculosis of the ulnar bone. INTERVENTIONS: The patient underwent surgery to remove the affected ulnar tissue and received anti-tuberculosis medication. OUTCOMES: Subsequent to treatment, the destruction and expansion of the ulnar bone resolved, with the return of normal ulnar morphology and bone structure. LESSONS: Even in the absence of typical symptoms like fever, weight loss, and loss of appetite, extensive destruction and expansion of a long tubular bone should prompt vigilant consideration of bone tuberculosis.

Effect of different ulnar osteotomies on loading of the distal radioulnar joint: a finite element analysis.

BACKGROUND: Ulnar impingement syndrome is a prevalent source of ulnar carpal pain; however, there is ongoing debate regarding the specific location of shortening, the method of osteotomy, the extent of shortening, and the resulting biomechanical alterations. METHOD: To investigate the biomechanical changes in the distal radioulnar joint (DRUJ) resulting from different osteotomy methods, a cadaveric specimen was dissected, and the presence of a stable DRUJ structure was confirmed. Subsequently, three-dimensional data of the specimen were obtained using a CT scan, and finite element analysis was conducted after additional processing. RESULTS: The DRUJ stress did not change significantly at the metaphyseal osteotomy of 2-3 mm but increased significantly when the osteotomy length reached 5 mm. When the osteotomy was performed at the diaphysis, the DRUJ stress increased with the osteotomy length, and the increase was greater than that of metaphyseal osteotomy. Stress on the DRUJ significantly increases when the position is changed to pronation dorsi-extension. Similarly, the increase in stress in diaphyseal osteotomy was greater than that in metaphyseal osteotomy. When the model was subjected to a longitudinal load of 100 N, neither osteotomy showed a significant change in DRUJ stress at the neutral position. However, the 100 N load significantly increased stress on the DRUJ when the position was changed to pronation dorsi-extension, and the diaphyseal osteotomy significantly increased stress on the DRUJ. CONCLUSIONS: For patients with distal oblique bundle, metaphyseal osteotomy result in a lower increase in intra-articular pressure in the DRUJ compared to diaphyseal osteotomy. However, it is crucial to note that regardless of the specific type of osteotomy employed, it is advisable to avoid a shortening length exceeding 5 mm.

Posttraumatic proximal radioulnar synostosis: Current concepts on the clinical presentations, classifications, and open surgical approaches.

In the forearm, posttraumatic heterotopic ossification usually forms as a proximal radioulnar synostosis. It can occur after soft tissue injury involving the interosseous membrane or after surgery involving the radio and ulna, such as distal biceps tendon repair. It can also be induced by radial head dislocation or fracture. Screening radiography can be used to select the appropriate time for excision. The synostosis can be resected when the ectopic bone margin and trabeculation appear mature on radiographs. An interval of 6-12 months from the injury is generally recommended based on ectopic bone maturity. Selection of the surgical approach depends on site, extension (elbow joint or proximal radioulnar joint), severity of the initial articular surface, and periarticular tissue injury. The posterolateral approach is indicated for synostoses: at or distal to the bicipital tuberosity, at the level of the radial head, and proximal radioulnar joint. The posterior global approach is recommended when the forearm synostosis is associated with complete bony ankylosis of the elbow involving the distal aspect of the humerus. After surgical resection of a proximal radioulnar synostosis, the exposed bone surfaces can be covered with interposition material to minimize recurrence.

Distinct patterns of fracture propagation in distal radial fractures and the relationship to the ulnar head.

BACKGROUND: The aim was to assess the direction of distal radius fractures and their relationship to the ulnar head. METHODS: We reviewed the 160 wrist radiographs. The fracture line was measured on the postero-anterior and lateral radiographs relative to the long axis of the forearm and the relationship to the ulnar head. FINDINGS: PA radiographs: the fracture line ran distal ulnar to proximal radial (ulnar to radial) in 11%, transverse in 74% and distal radial to proximal ulnar (radial to ulnar) in 16%. Lateral radiographs: the fracture line ran distal volar to proximal dorsal in 88%, transverse in two 1% and dorsal to volar in 11%. Radial shift (7.5%) only occurred with ulnar to radial or transverse fractures. The ulnar to radial fracture line started at the proximal end of the ulnar head/distal radio-ulnar joint in 88%. The radial to ulnar fracture line started ended a mean of 2.5 mm proximal to the distal radio-ulnar joint (p < 0.01). The transverse fracture line started at the base of the distal radio-ulnar joint in 53% and proximally in 47%. INTERPRETATION: There are two distinct coronal patterns: radial to ulnar ending c. 2 mm proximal to the distal radio-ulnar joint; ulnar to radial starting at the proximal distal radio-ulnar joint. There may be third pattern - transverse fractures; these may be variants of the above. Sagittally the main direction is volar to dorsal but 11% are obverse. This is the first description of distinct fracture patterns in extra-articular distal radius fractures. In addition the fracture patterns appear to correlate with different directions of force transmission which fit with our understanding of falling and the relatively uncontrolled impact of the wrist/hand with the ground. These patterns of fracture propagation help understand how the biomechanics of wrist fractures and may enable prediction of collapse.

Outcomes of Ulnar Shortening Osteotomy with an Intramedullary Bone Graft for Idiopathic Ulnar Impaction Syndrome.

Background: Although several techniques for the treatment of ulnar impaction syndrome (UIS) have been introduced, there have still been reports on various complications such as delayed union, nonunion, refracture, wrist pain, plate irritation, and chronic regional pain syndrome. This study aimed to compare the differences in radiological and clinical outcomes of patients in which intramedullary bone grafting was performed in addition to plate stabilization with those without additional bone grafting during ulnar shortening osteotomies (USOs). Methods: Between November 2014 and June 2021, 53 wrists of 50 patients with idiopathic UIS were retrospectively reviewed. Patients were divided into 2 groups according to whether intramedullary bone grafting was performed. Among the 53 wrists, USO with an intramedullary bone graft was performed in 21 wrists and USO without an intramedullary bone graft was performed in 32 wrists. Demographic data and factors potentially associated with bone union time were analyzed. Results: There was no significant difference between the 2 groups when comparing postoperative radioulnar distance, postoperative ulnar variance, amount of ulnar shortening, and postoperative Disabilities of the Arm, Shoulder and Hand score. Compared to the without-intramedullary bone graft group, bone union time of the osteotomy site was significantly shortened, from 8.8 ± 3.0 weeks to 6.7 ± 1.3 weeks in the with-intramedullary bone graft group. Moreover, there were no cases of nonunion or plate-induced symptoms. Both in univariable and multivariable analyses, intramedullary bone grafting was associated with shorter bone union time. Conclusions: USO with an intramedullary bone graft for idiopathic UIS has favorable radiological and clinical outcomes. The advantage of this technique is the significant shortening of bone union time.

Considerable variation in current coronoid height and fracture measurement techniques: a systematic review.

BACKGROUND: Coronoid fractures usually occur in the presence of a significant osseoligamentous injury to the elbow. Fracture size and location correlate with degree of instability and many authors have attempted to analyze the effect of fracture variation on decision making and outcome. There remains no standardized technique for measuring coronoid height or fracture size. The aim of this study was to appraise the literature regarding techniques for coronoid height measurement in order to understand variation. METHODS: Preferred Reporting Items of Systematic Reviews and Meta-Analyses guidelines were followed. A search was performed to identify studies with either a description of coronoid height, fracture size, or bone loss using the terms (Coronoid) AND (Measurement) OR (Size) OR (Height). Articles were shortlisted by screening for topic relevance based on title, abstract and, if required, full-text review. Exclusion criteria were non-English articles, those on nonhuman species or parts other than the ulna coronoid process, and studies that included patients with pre-existing elbow pathology. Shortlisted articles were grouped based on study type, imaging modality, measurement technique, and measurement parameter as well as its location along the coronoid. RESULTS: Thirty out of the initially identified 494 articles met the inclusion criteria. Twenty-one articles were clinical studies, 8 were cadaveric studies, and 1 combined patients as well as cadavers. A variety of imaging modalities (plain radiographs, 2-dimensional computed tomography [CT], 3-dimensional CT, magnetic resonance imaging or a combination of these) were used with CT scan (either 2-dimensional images or 3-dimensional reconstructions or both) being the most common modality used by 21 studies. Measurement technique also varied from uniplanar linear measurements in 15 studies to multiplanar area and volumetric measurements in 6 studies to techniques describing various angles and indices as an indirect measure of coronoid height in 8 studies. Across the 30 shortlisted studies, 19 different measurement techniques were identified. Fifteen studies measured normal coronoid height while the other 15 measured intact coronoid and/or fracture fragment height. The location of this measurement was also variable between studies with measurements at the apex of the coronoid in 24/30 (80%) of studies. Measurement accuracy was assessed by only 1 study. A total of 12/30 (40%) studies reported on the interobserver and intraobserver reliability of their measurement technique. CONCLUSION: The systemic review demonstrated considerable variability between studies that report coronoid height or fracture size measurements. This variability makes comparison of coronoid height or fracture measurements and recommendations based on these between studies unreliable. There is need for development of a consistent, easy to use, and reproducible technique for coronoid height and bone loss.

Minimial clinically important difference values in distal metaphyseal ulnar shortening for ulnar impaction syndrome and assessment of the relationship between level of the osteotomy and bone union time.

OBJECTIVE: We aimed to define minimal clinically important difference (MCID) values of patient-reported outcome measures (PROMs) for distal metaphyseal ulnar shortening and to assess the relationship between level of the osteotomy and time to bone union. METHODS: 20 patients who had distal metaphyseal ulnar shortening osteotomies due to ulnar impaction syndrome and had at least 6 months of follow-ups were included in this study. The mean follow-up period was 12.3 ± 7.01 months. The PROMs which consisted of patient-rated wrist evaluation (PRWE) and quick disabilities of arm, shoulder, and hand (QDASH) were recorded on the day before the surgery and at follow-up assessments. Grip strength and range of motion were recorded for operated and contralateral wrists at postoperative assessments. Postoperative radiological evaluations of distance of the osteotomy from the distal ulnar articular surface (osteotomy level), the union of osteotomy site; preoperative and postoperative evaluations of styloid-triquetral distance, and ulnar variance were performed using AP wrist x-rays. The MCID values for PRWE and QDASH were calculated using ROC curve analysis. RESULTS: Mean PRWE and QDASH scores decreased statistically significantly. The mean grip strength of contralateral wrists was higher. Mean ulnar variance decreased, whereas styloid-triquetral distance increased postoperatively. Patients with osteotomy levels of greater than 13.7 mm had a longer time from surgery to bone union. Furthermore, patients with time from surgery to bone union shorter than 7 weeks had an osteotomy closer to the ulnar articular surface. The MCID values for PRWE and QDASH were analyzed and calculated through the ROC curve as 22.25 and 20.45, respectively. CONCLUSION: This study has shown us that the osteotomy level affects the time to bone union and an osteotomy closer than 13.7 mm to the ulnar articular surface seems to result in shorter union time. Furthermore, MCID values were defined for PRWE and QDASH as 22.25 and 20.45, respectively. LEVEL OF EVIDENCE: Level IV, Therapeutic Study.

Measurement of Radiological Parameters of Distal Radius Fracture Using the Ulnar Axis Compared with the Radial Axis.

Background: The long axis of the radius is a standard reference for measuring radiological parameters in distal radius fractures. However, in patients with severe comminution and anatomical variation with distal radius bowing, it is challenging to assess using the long axis of the radius. The long axis of the ulna can be used as an alternative reference. The aim of this study is to assess the reliability and level of agreement using the long axis of the ulna as an alternative reference in comparison to the long axis of the radius. Methods: Posteroanterior (PA) radiography of the wrist in patients with acute distal radius fractures was evaluated in two rounds by four observers. Radial height, radial inclination and ulnar variance were measured using radial and ulnar long axis as references. The intraobserver and interobserver reliability of the measurements with two reference axes was assessed using intraclass correlation coefficient (ICC). The level of agreement was determined using the Bland-Altman plot. Results: In total, 59 patients who underwent PA radiography of the wrist were included in this study. All parameters exhibited good agreement between the two methods, with a mean difference of nearly zero (radial height = -0.03 mm, radial inclination = -0.14° and ulnar variance = 0.03 mm). The limits of agreement in radial height (-2.87, 2.82 mm) and ulnar variance (-0.81, 0.87 mm) were narrow. However, for the radial inclination, it was wider (-6.21, 5.94°). Intraobserver reliability between the long axis of radius and ulna (ICC = 0.85-0.99 and 0.84-0.98, respectively) was good to excellent. The interobserver reliability of each parameter was excellent (ICC = 0.94-0.97). Conclusions: The ulnar long axis can be used as an alternative reference for measuring radial height, radial inclination and ulnar variance in PA radiography of the wrist in acute distal radius fracture, particularly if the radial long axis is distorted. Level of Evidence: Level III (Diagnostic).

Malignant giant cell tumour of distal ulna.

Giant cell tumour (GCT) accounts for 5% of all primary bone tumours. GCT in the distal third of ulna is quite rare. We present a case of recurrent GCT in distal third of ulna with malignant features involving tenosynovium. The case was treated by wide resection of tumour and on follow up, patient recovered well with no evidence of further recurrence. Considering the features, according to the literature reviewed, is the first case of its type.

Zoledronate reduces loading-induced microdamage in cortical ulna of ovariectomized rats.

As a daily physiological mechanism in bone, microdamage accumulation dissipates energy and helps to prevent fractures. However, excessive damage accumulation might bring adverse effects to bone mechanical properties, which is especially problematic among the osteoporotic and osteopenic patients treated by bisphosphonates. Some pre-clinical studies in the literature applied forelimb loading models to produce well-controlled microdamage in cortical bone. Ovariectomized animals were also extensively studied to assimilate human conditions of estrogen-related bone loss. In the present study, we combined both experimental models to investigate microdamage accumulation in the context of osteopenia and zoledronate treatment. Three-month-old normal and ovariectomized rats treated by saline or zoledronate underwent controlled compressive loading on their right forelimb to create in vivo microdamage, which was then quantified by barium sulfate contrast-enhanced micro-CT imaging. Weekly in vivo micro-CT scans were taken to evaluate bone (re)modeling and to capture microstructural changes over time. After sacrifice, three-point-bending tests were performed to assess bone mechanical properties. Results show that the zoledronate treatment can reduce cortical microdamage accumulation in ovariectomized rats, which might be explained by the enhancement of several bone structural properties such as ultimate force, yield force, cortical bone area and volume. The rats showed increased bone formation volume and surface after the generation of microdamage, especially for the normal and the ovariectomized groups. Woven bone formation was also observed in loaded ulnae, which was most significant in ovariectomized rats. Although all the rats showed strong correlations between periosteal bone formation and microdamage accumulation, the correlation levels were lower for the zoledronate-treated groups, potentially because of their lower levels of microdamage. The present study provides insights to further investigations of pharmaceutical treatments for osteoporosis and osteopenia. The same experimental concept can be applied in future studies on microdamage and drug testing.

Length changes in the distal oblique band during forearm rotation measured using four-dimensional CT: an in vivo study.

Length change in the distal oblique band during forearm rotation was measured using four-dimensional CT in seven volunteers. There was no significant change in length, which provides more theoretical support for distal oblique band reinforcement for treatment of instability of the distal radioulnar joint.

Adamantinoma of the Ulnar Shaft Reconstructed With a Vascularized Free Fibula.

We describe a 36-year-old man with a long-standing diagnosis of ulnar fibrous dysplasia with associated fracture of the ulna. He presented with a growing and increasingly tender forearm mass and was diagnosed with adamantinoma of the ulna, for which he underwent wide resection of the ulnar diaphysis followed by reconstruction with a vascularized fibula autograft. This case serves to emphasize the importance of performing a stepwise workup for the diagnosis of osseous neoplasms even in cases with long-standing diagnoses. [Orthopedics. 2024;47(2):e102-e105.].