Effectiveness of UV-C radiation in inactivation of microorganisms on materials with different surface structures.

INTRODUCTION AND OBJECTIVE: Ultraviolet light in the UV-C band is known as germicidal radiation and was widely used for both sterilization of the equipment and creation of a sterile environment. The aim of the study is to assess the effectiveness of inactivation of microorganisms deposited on surfaces with various textures by UV-C radiation disinfection devices. MATERIAL AND METHODS: Five microorganisms (3 bacteria, virus, and fungus) deposited on metal, plastic, and glass surfaces with smooth and rough textures were irradiated with UV-C light emitted by low-pressure mercury lamp and ultraviolet emitting diodes (LEDs), from a distance of 0.5 m, 1 m, and 1.5 m to check their survivability after 20-minute exposure. RESULTS AND CONCLUSIONS: Both tested UV-C sources were effective in inactivation of microorganisms; however, LED emitter was more efficient in this respect than the mercury lamp. The survival rate of microorganisms depended on the UV-C dose, conditioned by the distance from UV-C source being the highest at 0.5 m and the lowest at 1.5 m. For the tested microorganisms, the highest survival rate after UV-C irradiation was usually visible on glass and plastic surfaces. This observation should be considered in all environments where the type of material (from which the elements of technical equipment are manufactured and may be contaminated by specific activities) is important for maintaining the proper level of hygiene and avoiding the unwanted and uncontrolled spread of microbiological pollution.

Ultraviolet germicidal irradiation: A prediction model to estimate UV-C-induced infectivity loss in single-strand RNA viruses.

Ultraviolet germicidal irradiation (UVGI) disinfection technology is effective in inactivating microorganisms. However, its performance can vary against different microorganisms due to their diverse structural and genomic features. Thus, rapid predictions of UV (254 nm) inactivation kinetics are essential, particularly for highly infectious emerging pathogens, such as SARS-CoV-2, during the extemporary COVID-19 pandemic. In this study, aiming at single-strand RNA (ssRNA) viruses, an improved genomic model was introduced to predict the UV inactivation kinetics of viral genomes using genome sequence data. First, the overall virus infectivity loss in an aqueous matrix was estimated as the sum of damage to both the entire genome and the protein capsid. Then, the "UV rate constant ratio of aerosol and liquid" was used to convert the UV rate constant for viruses in a liquid-based matrix to an airborne state. The prediction model underwent both quantitative and qualitative validation using experimental data from this study and the literature. Finally, with the goal of mitigating potential airborne transmission of ssRNA viruses in indoor environments, this paper summarizes existing in-duct UVGI system designs and evaluates their germicidal performance. The prediction model may serve as a preliminary tool to assess the effectiveness of a UVGI system for emerging or unculturable viruses or to estimate the required UV dose when designing such a system.

Ultraviolet-C light at 222 nm has a high disinfecting spectrum in environments contaminated by infectious pathogens, including SARS-CoV-2.

Ultraviolet light (UV) acts as a powerful disinfectant and can prevent contamination of personal hygiene from various contaminated environments. The 222-nm wavelength of UV-C has a highly effective sterilization activity and is safer than 275-nm UV-C. We investigated the irradiation efficacy of 222-nm UV-C against contaminating bacteria and viruses in liquid and fabric environments. We conducted colony-forming unit assays to determine the number of viable cells and a 50% tissue culture infectious dose assay to evaluate the virus titration. A minimum dose of 27 mJ/cm2 of 222-nm UV-C was required for >95% germicidal activity for gram-negative and -positive bacteria. A 25.1 mJ/cm2 dose could ensure >95% virucidal activity against low-pathogenic avian influenza virus and severe acute respiratory syndrome coronavirus (SARS-CoV-2). In addition, this energy dose of 222-nm UV-C effectively inactivated SARS-CoV-2 variants, Delta and Omicron. These results provide valuable information on the disinfection efficiency of 222-nm UV-C in bacterial and virus-contaminated environments and can also develop into a powerful tool for individual hygiene.

UVC inactivation of pathogenic samples suitable for cryo-EM analysis.

Cryo-electron microscopy has become an essential tool to understand structure and function of biological samples. Especially for pathogens, such as disease-causing bacteria and viruses, insights gained by cryo-EM can aid in developing cures. However, due to the biosafety restrictions of pathogens, samples are often treated by chemical fixation to render the pathogen inert, affecting the ultrastructure of the sample. Alternatively, researchers use in vitro or ex vivo models, which are non-pathogenic but lack the complexity of the pathogen of interest. Here we show that ultraviolet-C (UVC) radiation applied at cryogenic temperatures can be used to eliminate or dramatically reduce the infectivity of Vibrio cholerae and the bacterial virus, the ICP1 bacteriophage. We show no discernable structural impact of this treatment of either sample using two cryo-EM methods: cryo-electron tomography followed by sub-tomogram averaging, and single particle analysis (SPA). Additionally, we applied the UVC irradiation to the protein apoferritin (ApoF), which is a widely used test sample for high-resolution SPA studies. The UVC-treated ApoF sample resulted in a 2.1 Å structure indistinguishable from an untreated published map. This research demonstrates that UVC treatment is an effective and inexpensive addition to the cryo-EM sample preparation toolbox.

Decontamination of respirators amid shortages due to SARS-CoV-2.

The pandemic created by SARS-CoV-2 has caused a shortage in the supplies of N95 filtering facepiece respirators (FFRs), disposable respirators with at least 95% efficiency to remove non-oily airborne particles, due to increasing cases all over the world. The current article reviewed various possible decontamination methods for FFR reuse including ultraviolet germicidal irradiation (UVGI), hydrogen peroxide vapor (HPV), microwave-generated steam (MGS), hydrogen peroxide gas plasma (HPGP), and 70% or higher ethanol solution. HPV decontamination was effective against bacterial spores (6 log10 reduction of Geobacillus stearothermophilus spores) on FFRs and viruses (> 4 log10 reduction of various types of viruses) on inanimate surfaces, and no degradation of respirator materials and fit has been reported. 70% or higher ethanol decontamination showed high efficacy in inactivation of coronaviruses on inanimate surfaces (> 3.9 log10 reduction) but it was lower on FFRs which filtration efficiency was also decreased. UVGI method had good biocidal efficacy on FFRs (> 3 log10 reduction of H1N1 virus) combined with inexpensive, readily available equipment; however, it was more time-consuming to ensure sufficient reduction in SARS-CoV-2. MGS treatment also provided good viral decontamination on FFRs (> 4 log10 reduction of H1N1 virus) along with less time-intensive process and readily available equipment while inconsistent disinfection on the treated surfaces and deterioration of nose cushion of FFRs were observed. HPGP was a good virucidal system (> 6 log10 reduction of Vesicular stomatitis virus) but filtration efficiency after decontamination was inconsistent. Overall, HPV appeared to be one of the most promising methods based on the high biocidal efficacy on FFRs, preservation of respirator performance after multiple cycles, and no residual chemical toxicity. Nonetheless, equipment cost and time of the HPV process and a suitable operating room need to be considered.

Ultraviolet radiation, vitamin D, and COVID-19.

Severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2), the causative agent of coronavirus disease 2019 (COVID-19), has become pandemic on March 11th, 2020. COVID-19 has a range of symptoms that includes fever, fatigue, dry cough, aches, and labored breathing to acute respiratory distress and possibly death. Health systems and hospitals have been completely rearranged since March 2020 in order to limit the high rate of virus spreading. Hence, a great debate on deferrable visits and treatments including phototherapy for skin diseases is developing. In particular, as regards phototherapy very few data are currently available regarding the chance to continue it, even if it may be a useful resource for treating numerous dermatological patients. However, phototherapy has an immunosuppressive action possibly facilitating virus infection. In the context of COVID-19 infection risk it is important to pointed out whether sunlight, phototherapy and in particular ultraviolet radiation (UV-R) constitute or not a risk for patients. In this review we aimed to focus on the relationship between UV-R, sunlight, phototherapy, and viral infections particularly focusing on COVID-19.

Integrated photothermal decontamination device for N95 respirators.

The severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) responsible for the COVID-19 global pandemic has infected over 25 million people worldwide and resulted in the death of millions. The COVID-19 pandemic has also resulted in a shortage of personal protective equipment (PPE) in many regions around the world, particularly in middle- and low-income countries. The shortages of PPE, such as N95 respirators, is something that will persist until an effective vaccine is made available. Thus, devices that while being easy to operate can also be rapidly deployed in health centers, and long-term residences without the need for major structural overhaul are instrumental to sustainably use N95 respirators. In this report, we present the design and validation of a decontamination device that combines UV-C & B irradiation with mild-temperature treatment. The device can decontaminate up to 20 masks in a cycle of < 30 min. The decontamination process did not damage or reduce the filtering capacity of the masks. Further, the efficacy of the device to eliminate microbes and viruses from the masks was also evaluated. The photothermal treatment of our device was capable of eradicating > 99.9999% of the bacteria and > 99.99% of the virus tested.

Recent advances on the application of UV-LED technology for microbial inactivation: Progress and mechanism.

Conventional technologies for the inactivation of microorganisms in food products have their limitations, especially changes in quality attributes that have led to quality deterioration, low consumer acceptance, impact on the environment, and potential health hazards (carcinogens). Ultraviolet (UV) light is an emerging promising nonthermal technology employed for microbial inactivation in water, liquid, and solid food products to curtail the limitations above. This review provides an insight into UV light-emitting diodes (UV-LEDs)' potential as an alternative to the traditional UV lamps for microbial inactivation in liquid and solid media. Also, the mechanisms of inactivation of lone and combined UVA-, UVB-, and UVC-LEDs were discussed. The strategies utilized to improve the efficacy between the UV-LED treatments at various wavelengths were summarized. Combining different UV-LEDs treatments at different wavelengths have a synergistic effect and suppression of microbial cell reactivation. The UV-LED-based advanced oxidation processes (AOPs) also have high germicidal action against numerous microorganisms and are efficient for the degradation of micropollutants. Among the UV-LEDs discussed, UVC-LED has the most antimicrobial effect with the most efficient micropollutants decomposition with regards to UV-LED-based AOPs. This review has provided vital information for future application, development, and customization of UV-LED systems that can meet the food and water safety requirements and energy efficiency.

Trends and targets in antiviral phototherapy.

Photodynamic therapy (PDT) is a well-established treatment option in the treatment of certain cancerous and pre-cancerous lesions. Though best-known for its application in tumor therapy, historically the photodynamic effect was first demonstrated against bacteria at the beginning of the 20th century. Today, in light of spreading antibiotic resistance and the rise of new infections, this photodynamic inactivation (PDI) of microbes, such as bacteria, fungi, and viruses, is gaining considerable attention. This review focuses on the PDI of viruses as an alternative treatment in antiviral therapy, but also as a means of viral decontamination, covering mainly the literature of the last decade. The PDI of viruses shares the general action mechanism of photodynamic applications: the irradiation of a dye with light and the subsequent generation of reactive oxygen species (ROS) which are the effective phototoxic agents damaging virus targets by reacting with viral nucleic acids, lipids and proteins. Interestingly, a light-independent antiviral activity has also been found for some of these dyes. This review covers the compound classes employed in the PDI of viruses and their various areas of use. In the medical area, currently two fields stand out in which the PDI of viruses has found broader application: the purification of blood products and the treatment of human papilloma virus manifestations. However, the PDI of viruses has also found interest in such diverse areas as water and surface decontamination, and biosafety.

Ultraviolet inactivation of bacteria and model viruses in coconut water using a collimated beam system.

This study investigated the effect of ultraviolet-C irradiation on the inactivation of microorganisms in coconut water, a highly opaque liquid food (1.01 ± 0.018 absorption coefficient). Ultraviolet-C inactivation kinetics of two bacteriophages (MS2, T1UV) and three surrogate bacteria (Escherichia coli, Salmonella Typhimurium, Listeria monocytogenes) in 0.1% (w/v) peptone and coconut water were investigated. Ultraviolet-C irradiation at 254 nm was applied to stirred samples, using a collimated beam device. A series of known ultraviolet-C doses (0-40 mJ cm-2) were applied for ultraviolet-C treatment except for MS2 where higher doses were delivered (100 mJ cm-2). Inactivation levels of all organisms were proportional to ultraviolet-C dose. At the highest dose of 40 mJ cm-2, three surrogates of pathogenic bacteria were inactivated by more than 5-log10 (p < 0.05) in 0.1% (w/v) peptone and coconut water. Results showed that ultraviolet-C irradiation effectively inactivated bacteriophage and surrogate bacteria in highly opaque coconut water. The log reduction kinetics of microorganisms followed log-linear and exponential models with higher R2 (>0.95) and low root mean square error values. The D10 values of 3, 5.48, and 4.58 mJ cm-2 were obtained from the inactivation of E. coli, S. Typhimurium, and L. monocytogenes, respectively. Models for predicting log reduction as a function of ultraviolet-C irradiation dose were found to be significant (p < 0.05). Fluid optics were the key controlling parameters for efficient microbial inactivation. Therefore, the ultraviolet-C dose must be calculated not only from the incident ultraviolet-C intensity but must also consider the attenuation in the samples. The results from this study imply that adequate log reduction of vegetative cells and model viruses is achievable in coconut water and suggested significant potential for ultraviolet-C treatment of other liquid foods.

Water Disinfection in Rural Areas Demands Unconventional Solar Technologies.

Providing access to safe drinking water is a prerequisite for protecting public health. Vast improvements in drinking water quality have been witnessed during the last century, particularly in urban areas, thanks to the successful implementation of large, centralized water treatment plants and the distribution of treated water via underground networks of pipes. Nevertheless, infection by waterborne pathogens through the consumption of biologically unsafe drinking water remains one of the most significant causes of morbidity and mortality in developing rural areas. In these areas, the construction of centralized water treatment and distribution systems is impractical due to high capital costs and lack of existing infrastructure. Improving drinking water quality in developing rural areas demands a paradigm shift to unconventional, innovative water disinfection strategies that are low cost and simple to implement and maintain, while also requiring minimal infrastructure. The implementation of point-of-use (POU) disinfection techniques at the household- or community-scale is the most promising intervention strategy for producing immediate health benefits in the most vulnerable rural populations. Among POU techniques, solar-driven processes are considered particularly instrumental to this strategy, as developing rural areas that lack safe drinking water typically receive higher than average surface sunlight irradiation. Materials that can efficiently harvest sunlight to produce disinfecting agents are pivotal for surpassing the disinfection performance of conventional POU techniques. In this account, we highlight recent advances in materials and processes that can harness sunlight to disinfect water. We describe the physicochemical properties and molecular disinfection mechanisms for four categories of disinfectants that can be generated by harvesting sunlight: heat, germicidal UV radiation, strong oxidants, and mild oxidants. Our recent work in developing materials-based solar disinfection technologies is discussed in detail, with particular focus on the materials' mechanistic functions and their modes of action for inactivation of three common types of waterborne pathogens (i.e., bacteria, virus, and protozoa). We conclude that different solar disinfection technologies should be applied depending on the source water quality and target pathogen due to significant variations on susceptibility of microbial components to disparate disinfectants. In addition, we expect that ample research opportunities exist on reactor design and process engineering for scale-up and improved performance of these solar materials, while accounting for the infrastructure demand and capital input. Although the practical implementation of new treatment techniques will face social and economic challenges that cannot be overlooked, novel technologies such as these can play a pivotal role in reducing water borne disease burden in rural communities in the developing world.

Gamma Irradiation as an Effective Method for Inactivation of Emerging Viral Pathogens.

Gamma irradiation using a cobalt-60 source is a commonly used method for the inactivation of infectious specimens to be handled safely in subsequent laboratory procedures. Here, we determined irradiation doses to safely inactivate liquid proteinaceous specimens harboring different emerging/reemerging viral pathogens known to cause neglected tropical and other diseases of regional or global public health importance. By using a representative arenavirus, bunyavirus, coronavirus, filovirus, flavivirus, orthomyxovirus, and paramyxovirus, we found that these enveloped viruses differed in their susceptibility to irradiation treatment with adsorbed doses for inactivation of a target dose of 1 × 106 50% tissue culture infectious dose (TCID50)/mL ranging from 1 to 5 MRads. This finding seemed generally inversely correlated with genome size. Our data may help to guide other facilities in testing and verifying safe inactivation procedures.

Evaluation of the effectiveness of the SurePure Turbulator ultraviolet-C irradiation equipment on inactivation of different enveloped and non-enveloped viruses inoculated in commercially collected liquid animal plasma.

The objective of this study was to evaluate the effectiveness of the SurePure Turbulator ultraviolet-C (UV-C, 254 nm wavelength) irradiation equipment on inactivation of different enveloped and non-enveloped viruses in commercially collected liquid animal plasma. Specifically, Pseudorabies virus (PRV), Porcine reproductive and respiratory syndrome virus (PRRSV), Porcine epidemic diarrhea virus (PEDV), Bovine viral diarrhea virus (BVDV), Classical swine fever virus (CSFV), Swine influenza virus (SIV) as enveloped viruses and Porcine parvovirus (PPV), Swine vesicular disease virus (SVDV), Porcine circovirus type 2 (PCV-2) and Senecavirus A (SVA) as non-enveloped viruses, were inoculated in bovine or porcine plasma and subjected to different UV-C irradiation doses (0, 750, 1500, 3000, 6000 and 9000 J/L) using an UV-C device developed for opaque liquid working under turbulent flow. The enveloped viruses tested were inactivated at < 3000 J/L of UV-C, being the dose needed to inactivate 4 log TCID50 (4D) of 1612 J/L for PRV,1004 J/L for PRRSV, 1953 J/L for PEDV, 1639 J/L for SIV, 1641 J/L for CSFV and 1943 J/L for BVDV. The non-enveloped viruses tended to have higher 4D values: 2161 J/L for PPV, 3223 J/L for SVA and 3708 J/L for SVDV. Because the initial viral concentration was <4.0 Log for PCV-2, it was not possible to calculate the 4D value for this virus. In conclusion, these results demonstrated that the SurePure Turbulator UV-C treatment system is capable of inactivating significant levels of swine viruses inoculated in commercially collected porcine or bovine plasma. It was concluded that irradiation with UV-C can provide an additional redundant biosafety feature in the manufacturing process of spray-dried animal plasma.

Inactivation of some pathogenic bacteria and phytoviruses by ultrasonic treatment.

High intensity ultrasound is becoming important and more widely used in the food industry for microorganisms decontamination. This sterilization technique has been evaluated to improve food safety and to replace common processing with chemical additive compounds. The efficiency of a horn-type power ultrasound treatment (300 W and 600 W, 28 kHz, 10-30 min) on Listeria monocytogenes, Bacillus cereus, Escherichia coli, Salmonella typhimurium bacteria suspensions and phytoviruses was examined in this study. The results of this study showed that ultrasonic treatment can be used to eliminate vegetative cells of gram-positive and gram-negative bacteria from 1.59 to 3.4 log in bacterial suspensions and some phytoviruses in fruits.

Compatibility of Maximum-Containment Virus-Inactivation Protocols With Identification of Bacterial Coinfections by Matrix-Assisted Laser Desorption/Ionization Time-of-Flight Mass Spectrometry.

Diagnostics and research analyses involving samples containing maximum-containment viruses present unique challenges, and inactivation protocols compatible with downstream testing are needed. Our aim was to identify a validated viral inactivation protocol compatible with bacterial identification by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS). We assessed a panel of bacteria with 6 validated maximum-containment virus-inactivation protocols and report that inactivation with TRIzol or γ-irradiation is compatible with MALDI-TOF MS. The availability, simplicity, and rapidity of TRIzol inactivation make this method the more suitable choice.

UVC LED Irradiation Effectively Inactivates Aerosolized Viruses, Bacteria, and Fungi in a Chamber-Type Air Disinfection System.

In this study, the possibility of inactivating viral, bacterial, and fungal aerosols in a chamber-type air disinfection system by using a UVC light-emitting-diode (LED) array was investigated and inactivation rate constants of each microorganism were calculated in fitting curves of surviving populations. UVC LED array treatment effectively inactivated viral infectivity, achieving 5-log reductions within 45 mJ/cm2 for MS2, Qß, and ϕX174 viruses. UVC LED array effectiveness in inactivating Escherichia coli O157:H7, Salmonella enterica serovar Typhimurium, Listeria monocytogenes, and Staphylococcus aureus aerosols achieved 2.5- to 4-log reductions within 1.5 to 4.6 mJ/cm2 Also, 4-log reductions of Aspergillus flavus and Alternaria japonica were achieved at a dosage of 23 mJ/cm2 using UVC LED array irradiation. The highest UV susceptibility, represented by the inactivation rate constant, was calculated for bacteria, followed by fungi and viruses. UVC LED, an innovative technology, can effectively inactivate microorganisms regardless of taxonomic classification and can sufficiently substitute for conventional mercury UV lamps.IMPORTANCE The United Nations Environment Programme (UNEP) convened the Minamata Convention on Mercury in 2013 to ban mercury-containing products in order to ensure human and environmental health. It will be effectuated in 2020 to discontinue use of low-pressure mercury lamps and new UV-emitting sources have to replace this conventional technology. However, the UV germicidal irradiation (UVGI) system still uses conventional UV lamps, and no research has been conducted for air disinfection using UVC LEDs. The research reported here investigated the inactivation effect of aerosolized microorganisms, including viruses, bacteria, and fungi, with an UVC LED module. The results can be utilized as a primary database to replace conventional UV lamps with UVC LEDs, a novel type of UV emitter. Implementation of UVC LED technology is truly expected to significantly reduce the extent of global mercury contamination, and this study provides important baseline data to help ensure a healthier environment and increased health for humanity.

Sunlight-mediated inactivation of health-relevant microorganisms in water: a review of mechanisms and modeling approaches.

Health-relevant microorganisms present in natural surface waters and engineered treatment systems that are exposed to sunlight can be inactivated by a complex set of interacting mechanisms. The net impact of sunlight depends on the solar spectral irradiance, the susceptibility of the specific microorganism to each mechanism, and the water quality; inactivation rates can vary by orders of magnitude depending on the organism and environmental conditions. Natural organic matter (NOM) has a large influence, as it can attenuate radiation and thus decrease inactivation by endogenous mechanisms. Simultaneously NOM sensitizes the formation of reactive intermediates that can damage microorganisms via exogenous mechanisms. To accurately predict inactivation and design engineered systems that enhance solar inactivation, it is necessary to model these processes, although some details are not yet sufficiently well understood. In this critical review, we summarize the photo-physics, -chemistry, and -biology that underpin sunlight-mediated inactivation, as well as the targets of damage and cellular responses to sunlight exposure. Viruses that are not susceptible to exogenous inactivation are only inactivated if UVB wavelengths (280-320 nm) are present, such as in very clear, open waters or in containers that are transparent to UVB. Bacteria are susceptible to slightly longer wavelengths. Some viruses and bacteria (especially Gram-positive) are susceptible to exogenous inactivation, which can be initiated by visible as well as UV wavelengths. We review approaches to model sunlight-mediated inactivation and illustrate how the environmental conditions can dramatically shift the inactivation rate of organisms. The implications of this mechanistic understanding of solar inactivation are discussed for a range of applications, including recreational water quality, natural treatment systems, solar disinfection of drinking water (SODIS), and enhanced inactivation via the use of sensitizers and photocatalysts. Finally, priorities for future research are identified that will further our understanding of the key role that sunlight disinfection plays in natural systems and the potential to enhance this process in engineered systems.

Gamma irradiation inactivates honey bee fungal, microsporidian, and viral pathogens and parasites.

Managed honey bee (Apis mellifera) populations are currently facing unsustainable losses due to a variety of factors. Colonies are challenged with brood pathogens, such as the fungal agent of chalkbrood disease, the microsporidian gut parasite Nosema spp., and several viruses. These pathogens may be transmitted horizontally from worker to worker, vertically from queen to egg and via vectors like the parasitic mite, Varroa destructor. Despite the fact that these pathogens are widespread and often harbored in wax comb that is reused from year to year and transferred across beekeeping operations, few, if any, universal treatments exist for their control. In order to mitigate some of these biological threats to honey bees and to allow for more sustainable reuse of equipment, investigations into techniques for the sterilization of hive equipment and comb are of particular significance. Here, we investigated the potential of gamma irradiation for inactivation of the fungal pathogen Ascosphaera apis, the microsporidian Nosema ceranae and three honey bee viruses (Deformed wing virus [DWV], Black queen cell virus [BQCV], and Chronic bee paralysis virus [CBPV]), focusing on the infectivity of these pathogens post-irradiation. Results indicate that gamma irradiation can effectively inactivate A. apis, N. ceranae, and DWV. Partial inactivation was noted for BQCV and CBPV, but this did not reduce effects on mortality at the tested, relatively high doses. These findings highlight the importance of studying infection rate and symptom development post-treatment and not simply rate or quantity detected. These findings suggest that gamma irradiation may function as a broad treatment to help mitigate colony losses and the spread of pathogens through the exchange of comb across colonies, but raises the question why some viruses appear to be unaffected. These results provide the basis for subsequent studies on benefits of irradiation of used comb for colony health and productivity.

Review of the Comparative Susceptibility of Microbial Species to Photoinactivation Using 380-480 nm Violet-Blue Light.

Antimicrobial violet-blue light is an emerging technology designed for enhanced clinical decontamination and treatment applications, due to its safety, efficacy and ease of use. This systematized review was designed to compile the current knowledge on the antimicrobial efficacy of 380-480 nm light on a range of health care and food-related pathogens including vegetative bacteria, bacterial endospores, fungi and viruses. Data were compiled from 79 studies, with the majority focussing on wavelengths in the region of 405 nm. Analysis indicated that Gram-positive and Gram-negative vegetative bacteria are the most susceptible organisms, while bacterial endospores, viruses and bacteriophage are the least. Evaluation of the dose required for a 1 log10 reduction of key bacteria compared to population, irradiance and wavelength indicated that microbial titer and light intensity had little effect on the dose of 405 nm light required; however, linear analysis indicated organisms exposed to longer wavelengths of violet-blue light may require greater doses for inactivation. Additional research is required to ensure this technology can be used effectively, including: investigating inactivation of multidrug-resistant organisms, fungi, viruses and protozoa; further knowledge about the photodynamic inactivation mechanism of action; the potential for microbial resistance; and the establishment of a standardized exposure methodology.

Thermal processing of live bivalve molluscs for controlling viruses: On the need for a risk-based design.

Norovirus (NoV) and Hepatitis A virus (HAV) are the most important viral hazards associated with human illness following consumption of contaminated bivalve molluscs. The effectiveness of the current EU criteria for heat processing of bivalve molluscs (i.e. raising the temperature of the internal mollusc flesh to at least 90°C for a minimum of 90 seconds) was evaluated using predictive microbiology. A HAV thermal inactivation model was developed based on literature data in mollusc matrices during isothermal heat treatment. Application of the developed model demonstrated that the 90°C-90 s requirement may lead to significantly different virus inactivation depending on the commercial process design. This shows the need for the establishment of a Performance Criterion for bivalve molluscs heat processing which will assure a common specified level of consumer protection. A risk-based approach is described that allows for an effective processing design providing a more transparent and objective relation between the thermal processing targets and public health. Model simulations demonstrate that the F-value is a more appropriate Process Criterion than a single time-temperature combination since it enables the food business operators to design a process that is compliant with the safety requirements while at the same time achieving a desired product quality.