Enhancing antitumor efficacy of NIR-I region zinc phthalocyanine@upconversion nanoparticle through lysosomal escape and mitochondria targeting.

Accurately visualizing the intracellular trafficking of upconversion nanoparticles (UCNPs) loaded with phthalocyanines and achieving precise photodynamic therapy (PDT) using near-infrared (NIR) laser irradiation still present challenges. In this study, a novel NIR laser-triggered upconversion luminescence (UCL) imaging-guided nanoparticle called FA@TPA-NH-ZnPc@UCNPs (FTU) was developed for PDT. FTU consisted of UCNPs, folic acid (FA), and triphenylamino-phenylaniline zinc phthalocyanine (TPA-NH-ZnPc). Notably, TPA-NH-ZnPc showcases aggregation-induced emission (AIE) characteristic and NIR absorption properties at 741 nm, synthesized initially via molybdenum-catalyzed condensation reaction. The UCL emitted by FTU enable real-time visualization of their subcellular localization and intracellular trafficking within ovarian cancer HO-8910 cells. Fluorescence images revealed that FTU managed to escape from lysosomes due to the "proton sponge" effect of TPA-NH-ZnPc. The FA ligands on the surface of FTU further directed their transport and accumulation within mitochondria. When excited by a 980 nm laser, FTU exhibited UCL and activated TPA-NH-ZnPc, consequently generating cytotoxic singlet oxygen (1O2), disrupted mitochondrial function and induced apoptosis in cancer cells, which demonstrated great potential for tumor ablation.

Dual-channel fluorescent sensors based on chitosan-coated Mn-doped ZnS micromaterials to detect ampicillin.

The global threat of antibiotic resistance has increased the importance of the detection of antibiotics. Conventional methods to detect antibiotics are time-consuming and require expensive specialized equipment. Here, we present a simple and rapid biosensor for detecting ampicillin, a commonly used antibiotic. Our method is based on the fluorescent properties of chitosan-coated Mn-doped ZnS micromaterials combined with the ß-lactamase enzyme. The biosensors exhibited the highest sensitivity in a linear working range of 13.1-72.2 pM with a limit of detection of 8.24 pM in deionized water. In addition, due to the biological specificity of ß-lactamase, the proposed sensors have demonstrated high selectivity over penicillin, tetracycline, and glucose through the enhancing and quenching effects at wavelengths of 510 nm and 614 nm, respectively. These proposed sensors also showed promising results when tested in various matrices, including tap water, bottled water, and milk. Our work reports for the first time the cost-effective (Mn:ZnS)Chitosan micromaterial was used for ampicillin detection. The results will facilitate the monitoring of antibiotics in clinical and environmental contexts.

A novel approach for the facile synthesis of zinc oxide/carbon hybrid systems from corn distillers soluble: Surface modification and characterization for sustainable remediation.

Sustainable, efficient, and environmentally friendly ways to tailor the carbonaceous materials from bio sources with desired functionalities remain a challenge around the world. In this study, we represent a novel approach to synthesize carbon hybrid material based on Zinc Oxide/carbon (ZnO/C) hybrid systems by catalytic hydrothermal process via crosslinking reaction through nucleation and growth of ZnO particles at the functional groups of oxidized carbon material. This research explored the volarization of Condensed Corn Distillers Soluble (CDS) as a carbon precursor to synthesize biobased carbon spheres. Surface modification of the produced carbon spheres took place using zinc chloride (ZnCl2) during hydrothermal carbonization (HTC). Zinc chloride (ZnCl2) was used to function as a catalyst during HTC and functioned as a ZnO source to synthesize (ZnO/C) hybrid systems. Design Expert software v13 was used to design the hydrothermal carbonization (HTC) experiments and response surface methodology was used to find the optimized conditions for the preparation of carbon hybrid systems. The hydrothermal synthesis process introduced 3D stone like zinc oxide particles onto the carbon matrix. These particles were self-assembled onto the carbon framework to produce carbon hybrid systems with unique physical, chemical, structural and functional properties. Herein, the obtained carbon hybrid systems (ZnO/C) were investigated and discussed in detail. ZnO/C hybrid systems were analyzed for surface morphology using scanning electron microscopy (SEM) that presented a 3D spherical interconnected phase and XRD analyses were used for phase crystallinity that showed new crystalline phases such as hopeite and zincite after the ZnCl2 incorporation. Surface functional groups were also analyzed by FTIR and results confirmed the presence of hydrophilic groups such as -OH, CC, and COOH on the surface of ZnO/C hybrid carbon systems. This study provided the insightful guidance for tailoring novel design of multifunctional carbon material as an adsorbent/catalyst for various applications of sustainable remediation.

Optimization of Electrochemical Sensitivity in Anticancer Drug Quantification through ZnS@CNS Nanosheets: Synthesis via Accelerated Sonochemical Methodology.

Zinc sulfide/graphitic Carbon Nitride binary nanosheets were synthesized by using a novel sonochemical pathway with high electrocatalytic ability. The as- obtained samples were characterized by various analytical methods such as Transmission Electron Microscopy (TEM), Field emission scanning electron microscopy (FESEM), Energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction analysis (XRD), and X-ray photoelectron spectroscopy (XPS) to evaluate the properties of ZnS@CNS synthesized by this new route. Subsequently, the electrical and electrochemical performance of the proposed electrodes were characterized by using EIS and CV to establish an electroactive ability of the nanocomposites. The complete properties like structural and physical of ZnS@CNS were analyzed. As-prepared binary nanocomposite was applied towards the detection of anticancer drug (flutamide) by various electrochemical methods such as cyclic voltammetry (CV), differential pulse voltammetry (DPV) and amperometry. The glassy carbon electrode modified with a ZnS@CNS composite demonstrates a remarkable electrocatalytic efficiency for detecting flutamide in a pH 7.0 (PBS). The composite modified electrode shows synergistic effect of ZnS and CNS catalyst. The electrochemical sensing performance of the linear range was improved significantly due to high electroactive sites and rapid electron transport pathways. Crucially, the electrochemical method was successfully demonstrated in biological fluids which reveals its potential real-time applicability in the analysis of drug.

CdSe/ZnS Quantum Dots' Impact on In Vitro Actin Dynamics.

Quantum dots (QDs) are a novel type of nanomaterial that has unique optical and physical characteristics. As such, QDs are highly desired because of their potential to be used in both biomedical and industrial applications. However, the mass adoption of QDs usage has raised concerns among the scientific community regarding QDs' toxicity. Although many papers have reported the negative impact of QDs on a cellular level, the exact mechanism of the QDs' toxicity is still unclear. In this investigation, we study the adverse effects of QDs by focusing on one of the most important cellular processes: actin polymerization and depolymerization. Our results showed that QDs act in a biphasic manner where lower concentrations of QDs stimulate the polymerization of actin, while high concentrations of QDs inhibit actin polymerization. Furthermore, we found that QDs can bind to filamentous actin (F-actin) and cause bundling of the filament while also promoting actin depolymerization. Through this study, we found a novel mechanism in which QDs negatively influence cellular processes and exert toxicity.

Self-Assembled Matrine-PROTAC Encapsulating Zinc(II) Phthalocyanine with GSH-Depletion-Enhanced ROS Generation for Cancer Therapy.

The integration of a multidimensional treatment dominated by active ingredients of traditional Chinese medicine (TCM), including enhanced chemotherapy and synergistically amplification of oxidative damage, into a nanoplatform would be of great significance for furthering accurate and effective cancer treatment with the active ingredients of TCM. Herein, in this study, we designed and synthesized four matrine-proteolysis-targeting chimeras (PROTACs) (depending on different lengths of the chains named LST-1, LST-2, LST-3, and LST-4) based on PROTAC technology to overcome the limitations of matrine. LST-4, with better anti-tumor activity than matrine, still degrades p-Erk and p-Akt proteins. Moreover, LST-4 NPs formed via LST-4 self-assembly with stronger anti-tumor activity and glutathione (GSH) depletion ability could be enriched in lysosomes through their outstanding enhanced permeability and retention (EPR) effect. Then, we synthesized LST-4@ZnPc NPs with a low-pH-triggered drug release property that could release zinc(II) phthalocyanine (ZnPc) in tumor sites. LST-4@ZnPc NPs combine the application of chemotherapy and phototherapy, including both enhanced chemotherapy from LST-4 NPs and the synergistic amplification of oxidative damage, through increasing the reactive oxygen species (ROS) by photodynamic therapy (PDT), causing an GSH decrease via LST-4 mediation to effectively kill tumor cells. Therefore, multifunctional LST-4@ZnPc NPs are a promising method for killing cancer cells, which also provides a new paradigm for using natural products to kill tumors.

RuZn NPs with electroactivity and oxidase-like property for dual-mode anti-cancer drug monitoring.

6-mercaptopurine (6-MP) as the effective anti-cancer drug was used for the treatment of Crohn's disease and acute lymphoblastic leukaemia, but the response to maintenance therapy was variable with individual differences. In order to control the dosage and decrease the side effects of 6-MP, a sensitive and stable assay was urgently needed for 6-MP monitoring. Herein, RuZn NPs with electrochemical oxidation property and oxidase-like activity was proposed for dual-mode 6-MP monitoring. Burr-like RuZn NPs were prepared and explored to not only exhibit an electrochemical oxidation signal at 0.78 V, but also displayed excellent oxidase-like performances. RuZn NPs were utilized for the dual-mode monitoring of 6-MP, attributing to the formation of Ru-SH covalent bonding. The colorimetric method showed good linearity from 10 µM to 5 mM with the limit of detection (LOD) of 300 nM, while the electrochemical method provided a higher sensitivity with the LOD of 37 nM in range from 100 nM to 200 µM. This work provided a new way for the fabrication of dual-functional nanotags with electroactivity and oxidase-like property, and opened a dual-mode approach for the 6-MP detection applications with complementary and satisfactory results.

Potential-selective electrochemiluminescence of AgInS2/ZnS nanocrystals and its immunoassay application.

Potential-selective electrochemiluminescence (ECL) with tunable maximum-emission-potential ranging from 0.95 to 0.30 V is achieved using AgInS2/ZnS nanocrystals, which is promising in the design of multiplexed bioassay on commercialized ECL setups. The model system AgInS2/ZnS/N2H4 exhibits efficient ECL around 0.30 V and can be exploited for sensitive immunoassays with less electrochemical interference and crosstalk.

Enhanced benzene vapor adsorption through microwave-assisted fabrication of activated carbon from peanut shells using ZnCl2 as an activating agent.

Herein, microwave-assisted activated carbon (MW-AC) was fabricated from peanut shells using a ZnCl2 activator and utilized for the first time to eliminate benzene vapor as a volatile organic compound (VOC). During the MW-AC production process, which involved two steps-microwave treatment and muffle furnace heating-we investigated the effects of various factors and achieved the highest iodine number of 1250 mg/g. This was achieved under optimal operating conditions, which included a 100% impregnation ratio, CO2 as the gas in the microwave environment, a microwave power set at 500 W, a microwave duration of 10 min, an activation temperature of 500 °C and an activation time of 45 min. The structural and morphological properties of the optimized MW-AC were assessed through SEM, FTIR, and BET analysis. The dynamic adsorption process of benzene on the optimized MW-AC adsorbent, which has a significant BET surface area of 1204.90 m2/g, was designed using the Box-Behnken approach within the response surface methodology. Under optimal experimental conditions, including a contact duration of 80 min, an inlet concentration of 18 ppm, and a temperature of 26 °C, the maximum adsorption capacity reached was 568.34 mg/g. The experimental data are better described by the pseudo-second-order kinetic model, while it is concluded that the equilibrium data are better described by the Langmuir isotherm model. MW-AC exhibited a reuse efficiency of 86.54% for benzene vapor after five consecutive recycling processes. The motivation of the study highlights the high adsorption capacity and superior reuse efficiency of MW-AC adsorbent with high BET surface area against benzene pollutant. According to our results, the developed MW-AC presents itself as a promising adsorbent candidate for the treatment of VOCs in various industrial applications.

Synthesis of carboxylated cellulose nanocrystal/ZnO nanohybrids using Oxytenanthera abyssinica cellulose and zinc nitrate hexahydrate for radical scavenging, photocatalytic, and antibacterial activities.

The extremely low antioxidant, photocatalytic, and antibacterial properties of cellulose limit its application in the biomedical and environmental sectors. To improve these properties, nanohybrides were prepared by mixing carboxylated cellulose nanocrystals (CCNCs) and zinc nitrate hexahydrate. Data from FTIR, XRD, DLS, and SEM spectra showed that, ZnO nanoparticles, with a size ranging from 94 to 351 nm and the smallest nanoparticle size of 164.18 nm, were loaded onto CCNCs. CCNCs/ZnO1 nanohybrids demonstrated superior antibacterial, photocatalytic, and antioxidant performance. More considerable antibacterial activity was shown with a zone of inhibition ranging from 26.00 ± 1.00 to 40.33 ± 2.08 mm and from 31.66 ± 3.51 to 41.33 ± 1.15 mm against Gram-positive and Gram-negative bacteria, respectively. Regarding photodegradation properties, the maximum value (∼91.52 %) of photocatalytic methylene blue degradation was observed after 75 min exposure to a UV lamp. At a concentration of 125.00 µm/ml of the CCNC/ZnO1 nanohybrids sample, 53.15 ± 1.03 % DPPH scavenging activity was obtained with an IC50 value of 117.66 µm/ml. A facile, cost-effective, one-step synthesis technique was applied to fabricate CCNCs/ZnO nanohybrids at mild temperature using Oxytenanthera abyssinica carboxylated cellulose nanocrystals as biotemplate. The result showed that CCNCs/ZnO nanohybrids possess potential applications in developing advanced functional materials for dye removal and antibacterial and antioxidant applications.

Comparison of methods for activating sesame stalk lignin biochar for removing benzo[a]pyrene from sesame oil.

In this study, three activators and two activation methods were employed to activate sesame lignin-based biochar. The biochar samples were comprehensively characterized, their abilities to adsorb benzo[a]pyrene (BaP) from sesame oil were assessed, and the mechanism was analyzed. The results showed that the biochar obtained by one-step activation was more effective in removing BaP from sesame oil than the biochar produced by two-step activation. Among them, the biochar generated by one-step activation with ZnCl2 as the activator had the largest specific surface area (1068.8776 m3/g), and the richest mesoporous structure (0.7891 m3/g); it removed 90.53 % of BaP from sesame oil. BaP was mainly adsorbed by the mesopores of biochar. Mechanistically, pore-filling, π-π conjugations, hydrogen bonding, and n-π interactions were involved. The adsorption was spontaneous and heat-absorbing. In conclusion, the preparation of sesame lignin biochar using one-step activation with ZnCl2 as the activator was found to be the best for removing BaP from sesame oil. This biochar may be an economical adsorbent for the industrial removal of BaP from sesame oil.

Development of a new phosphorescence sensor based on surface molecularly imprinted Mn-doped ZnS quantum dots for detection of melamine in milk products.

This paper presents a novel room temperature phosphorescence sensor (IMIPs-ZnS QDs RTP sensor) based on inorganic surface molecularly imprinted polymers and Mn-doped ZnS quantum dots (QDs) for the rapid detection of trace melamine (MEL) in commercial milk products. The surface of Mn-ZnS QDs was modified with 3-(mercaptopropyl) trimethoxy silane (MPTS). Then, MEL, 3-aminopropyltriethoxysilane (APTES) and tetraethoxysilane (TEOS) were used as a template/target molecule, functional monomer, and cross-linker, respectively. IMIPs-ZnS QDs RTP sensor was characterized using spectrofluorimeter, UV-Vis spectrophotometer, FT-IR, transmission electron microscope (TEM), and X-ray photoelectron spectrometer (XPS). Detection time and linear range for IMIPs-ZnS QDs RTP sensor were 30 min and 4.0-79.2 µM with a correlation coefficient value of 0.9946, respectively. Furthermore, LOD and LOQ values were calculated using Stern-Volmer equation as 0.29 and 0.97 µM, respectively. Thus, IMIPs-ZnS QDs RTP sensor was successfully applied for the detection of MEL residue in milk samples. Recovery values were in the range of 88.62-90.22 % with relatively high precision values (0.57-0.92 % RSD). Our findings indicate that the developed IMIPs-ZnS QDs RTP sensor exhibits high sensitivity and selectivity towards the MEL in milk sample containing potentially relatively high number of interfering compounds.

Exploring the Effects of Various Capping Agents on Zinc Sulfide Quantum Dot Characteristics and In-vitro Fate.

The choice of capping agents used during the synthesis process of quantum dots (QDs) can significantly influence their fate and fundamental properties. Hence, choosing an appropriate capping agent is a critical step in both synthesis and biomedical application of QDs. In this research, ZnS QDs were synthesized via chemical precipitation process and three commonly employed capping agents, namely mercaptoethanol (ME), mercaptoacetic acid (MAA), and cysteamine (CA), were used to stabilize the QDs. This study was aimed to examine how these capping agents impact the physicochemical and optical characteristics of ZnS QDs, as well as their interactions with biological systems. The findings revealed that the capping agents had considerable effects on the behavior and properties of ZnS QDs. MAA-QD exhibited superior crystal lattice, smaller size, and significant quantum yield (QY). In contrast, CA-QDs demonstrated the lowest QY and the highest tendency for aggregation. ME-QDs exhibited intermediate characteristics, along with an acceptable level of cytotoxicity, rapid uptake by cells, and efficient escape from lysosomes. Consequently, it is advisable to select capping agents in accordance with the specific objectives of the research.

Interactions between Quantum Dots and G-Actin.

Quantum dots (QDs) are a type of nanoparticle with excellent optical properties, suitable for many optical-based biomedical applications. However, the potential of quantum dots to be used in clinical settings is limited by their toxicity. As such, much effort has been invested to examine the mechanism of QDs' toxicity. Yet, the current literature mainly focuses on ROS- and apoptosis-mediated cell death induced by QDs, which overlooks other aspects of QDs' toxicity. Thus, our study aimed to provide another way by which QDs negatively impact cellular processes by investigating the possibility of protein structure and function modification upon direct interaction. Through shotgun proteomics, we identified a number of QD-binding proteins, which are functionally associated with essential cellular processes and components, such as transcription, translation, vesicular trafficking, and the actin cytoskeleton. Among these proteins, we chose to closely examine the interaction between quantum dots and actin, as actin is one of the most abundant proteins in cells and plays crucial roles in cellular processes and structural maintenance. We found that CdSe/ZnS QDs spontaneously bind to G-actin in vitro, causing a static quenching of G-actin's intrinsic fluorescence. Furthermore, we found that this interaction favors the formation of a QD-actin complex with a binding ratio of 1:2.5. Finally, we also found that CdSe/ZnS QDs alter the secondary structure of G-actin, which may affect G-actin's function and properties. Overall, our study provides an in-depth mechanistic examination of the impact of CdSe/ZnS QDs on G-actin, proposing that direct interaction is another aspect of QDs' toxicity.

Microwave-assisted synthesis of praseodymium (Pr)-doped ZnS QDs such as nanoparticles for optoelectronic applications.

Praseodymium (Pr)-doped ZnS nanoparticles were synthesized using a low-cost microwave-assisted technique and investigations on their structure, morphology, optical properties, Raman resonance, dielectric properties, and luminescence were conducted. Broad X-ray diffraction peaks suggested the formation of low-dimensional Pr-doped ZnS nanoparticles with a cubic structure that was validated using transmission electron microscopy (TEM)/high-resolution TEM analysis. The energy gaps were identified using diffuse reflectance spectroscopy and it was found that the values varied between 3.54eV and 3.61eV for different samples. Vibrational experiments on Pr-doped ZnS nanoparticles revealed significant Raman modes at ~270 and ~350 cm-1 that were associated with optical phonon modes that are shifted to lower wavenumbers, indicating phonon confinement in the synthesized products. The photoluminescence (PL) spectra of all samples demonstrated that the pure and Pr-doped ZnS nanoparticles were three-level laser active materials. Energy-dispersive X-ray spectroscopy and mapping study confirmed the homogeneous presence of Pr in ZnS. TEM studies showed that the particles were of very small size and in the cubic phase. The samples had high dielectric constant values between 13 and 24 and low loss values, according to the dielectric analysis. With an increase in frequency and a change in the Pr content of ZnS, an intense peak could be seen in the PL spectra at a wavelength of 360 nm, and some other peaks observed corresponded to the transition of Pr3+ . The produced nanoparticles were appropriate for optoelectronic applications due to their short dimension, high energy gap, high dielectric constant, and low loss values.

Multifunctional Cu:ZnS quantum dots for degradation of Amoxicillin and Dye Sulphon Fast Black-F and efficient determination of urea for assessing environmental aspects.

This work is particularly aimed at the preparation of ZnS and Cu doped ZnS (Cu:ZnS) QDs by facile and easy technique, chemical precipitation method for the degradation of water pollutants and a simple scheme was proposed to prepare the urea-sensing system. The morphological and optical properties of the synthesized QDs was studied using high resolution transmission and scanning electron microscopes, X-ray diffraction, energy dispersive X-ray analysis, fluorescence and ultraviolet-visible spectroscopy, differential thermal and thermogravimetric analyses, Brunauer-Emmett-Teller analysis. The photocatalytic performance was systematically assessed by the photodegradation of an important pharmaceutical water pollutant, Amoxicillin (AMX) and a dye Fast Sulphon Black F (SFBF) in aqueous medium under UV light irradiation. Also, a very sensitive system was prepared by depositing the dots over an indium-tin-oxide (ITO) glass substrate for the sensing of biologically active molecule urea as it is an important monitor of public health in water and soil productivity. The results illustrated excellent photocatalytic efficiency (86.46% for AMX and 99.41% for SFBF) with stability up to four cycles of degradation reaction. The optimal photocatalyst dosage for achieving maximum removal of AMX was found to be 70 mg at a pH of 9.5, with a treatment time of 40 min. Similarly, for SFBF, the optimal photocatalyst dosage was determined to be 60 mg at pH 9, with a treatment time of 60 min. Further, the electrochemical analysis was done by fabricating Urease enzyme (UR)/Cu:ZnS QDs/ITO bioelectrode and then the fabricated bioelectrode, was utilized to determine the different concentrations of urea by cyclic voltammetry. Thus, the obtained limit of detection and sensitivity of the fabricated biosensing device for urea detection was obtained to be 0.0092 µM and 12 µA µM-1cm-2, respectively; under the optimized experimental conditions. Hence, it is anticipated that Cu:ZnS QDs can also successfully be applied as a promising material for fabrication of novel bioelectrode for urea determination and the biosensing platform is desirable and viable.

Enhanced degradation of herbicides in groundwater using sulfur-containing reductants and spinel zinc ferrite activated persulfate.

A challenge to successfully implementing an injection-based remedial treatment in aquifers is to ensure that the oxidative reaction is efficient and lasts long enough to contact the contaminated plume. Our objective was to determine the efficacy of zinc ferrite nanocomposites (ZnFe2O4) and sulfur-containing reductants (SCR) (i.e., dithionite; DTN and bisulfite; BS) to co-activate persulfate (S2O82-; PS) and treat herbicide-contaminated water. We also evaluated the ecotoxicity of the treated water. While both SCRs delivered excellent PS activation in a 1:0.4 ratio (PS:SCR), the reaction was relatively short-lived. By including ZnFe2O4 in the PS/BS or PS/DTN activations, herbicide degradation rates dramatically increased by factors of 2.5 to 11.3. This was due to the SO4- and OH reactive radical species that formed. Radical scavenging experiments and ZnFe2O4 XPS spectra results revealed that SO4- was the dominant reactive species that originated from S(IV)/PS activation in solution and from the Fe(II)/PS activation that occurred on the ZnFe2O4 surface. Based on liquid chromatography mass spectrometry (LC-MS), atrazine and alachlor degradation pathways are proposed that involve both dehydration and hydroxylation. In 1-D column experiments, five different treatment scenarios were run using 14C-labeled and unlabeled atrazine, and 3H2O to quantify changes in breakthrough curves. Our results confirmed that ZnFe2O4 successfully prolonged the PS oxidative treatment despite the SCR being completely dissociated. Toxicity testing showed treated 14C-atrazine was more biodegradable than the parent compound in soil microcosms. Post-treatment water (25 %, v/v) also had less impact on both Zea Mays L. and Vigna radiata L. seedling growth, but more impact on root anatomies, while ≤4 % of the treated water started to exert cytotoxicity (<80 % viability) on ELT3 cell lines. Overall, the findings confirm that ZnFe2O4/SCR/PS reaction is efficient and relatively longer lasting in treating herbicide-contaminated groundwater.

Size-controlled growth of ZnSe nanocrystals for high-performance photocatalytic H2O2 production in pure water.

Semiconductor photocatalysis is deemed as a novel and promising process that can produce H2O2 from earth-abundant water and gaseous dioxygen using sunlight as the energy supply. The searching of novel catalysts for photocatalytic H2O2 production has received increasing attention in the last few years. Herein, size-controlled growth of ZnSe nanocrystals was realized via a solvothermal method by varying the amount of Se and KBH4. The performance of the as-obtained ZnSe nanocrystals towards photocatalytic H2O2 production depends on the mean size of the synthesized nanocrystals. Under O2-bubbling, the optimal ZnSe sample presented an excellent H2O2 production efficiency (8.596 mmol g-1 h-1), and the apparent quantum efficiency for H2O2 production reaches as high as 2.84% at λ = 420 nm. Under air-bubbling, the accumulation of H2O2 was as high as 1.758 mmol L-1 after 3 h irradiation at the ZnSe dosage of 0.4 g L-1. The photocatalytic H2O2 production performance is far superior to the most investigated semiconductors such as TiO2, g-C3N4, and ZnS.

A study on the mechanism of Indium phosphide/zinc sulfide core/shell quantum dots influencing embryo incubation of rare minnow (Gobiocypris rarus).

Quantum dots (QDs) inhibit fish hatching, but the mechanism is still unclear. In this study, the effect of Indium phosphide/zinc sulfide quantum dots (InP/ZnS QDs) on the embryo incubation of rare minnow was investigated. Five experimental concentration groups were set up according to the preliminary experimental results, which were 0, 50, 100, 200 and 400 nM. A direct exposure method was adopted to expose embryos to InP/ZnS QDs solution. The results showed that InP/ZnS QDs significantly inhibited the embryo hatching rate, delayed embryo emergence, affected the expression of genes associated with hatching gland cells and hatching enzymes. InP/ZnS QDs also destroy the structure of the embryo chorion. In addition, QDs can cause oxidative stress in embryos. Transcriptional sequencing analysis showed that InP/ZnS QDs InP/ZnS QDs may have induced the production of a hypoxic environment and triggered induce abnormal cardiac muscle contraction, inflammatory response and apoptosis process in embryos. In conclusion, QDs influences embryo hatchability largely through egg chorion mediation.

Effect of metal ion on optical, photoluminescence, morphological, and photocatalytic properties of ZnS nanoparticles.

The semiconducting materials of pure zinc sulfide (ZnS), 2.5 wt%, 5.0 wt%, 7.5 wt%, and 10 wt% of Ag-doped ZnS nanoparticles were prepared using the sol-gel technique. The prepared nanoparticles were analyzed by powder X-ray diffraction (PXRD), Fourier transformed infrared (FTIR), UV-visible absorption, diffuse reflectance photoluminescence (PL), high-resolution transmission electron microscope (HRTEM), and field emission scanning electron microscope (FESEM) to study the properties of pure ZnS and Ag-doped ZnS nanoparticles (NPs). The Ag-doped ZnS nanoparticles have a polycrystalline nature, which is confirmed by PXRD analysis. The functional groups were identified by the FTIR technique. The bandgap values decrease with increasing Ag concentration compared to pure ZnS NPs. The crystal size lies between 12 and 41 nm for pure ZnS and Ag-doped ZnS NPs. The presence of Zn, S, and Ag elements was confirmed by EDS analysis. Using methylene blue (MB), the photocatalytic activity of pure ZnS and Ag-doped ZnS NPs was performed. The highest degradation efficiency was observed for 7.5 wt% Ag-doped ZnS NPs.