Accuracy of osseointegrated screw-bone construct stiffness and peri-implant loading predicted by homogenized FE models relative to micro-FE models.

Computational predictions of stiffness and peri-implant loading of screw-bone constructs are highly relevant to investigate and improve bone fracture fixations. Homogenized finite element (hFE) models have been used for this purpose in the past, but their accuracy has been questioned given the numerous simplifications, such as neglecting screw threads and modelling the trabecular bone structure as a continuum. This study aimed to investigate the accuracy of hFE models of an osseointegrated screw-bone construct when compared to micro-FE models considering the simplified screw geometry and different trabecular bone material models. Micro-FE and hFE models were created from 15 cylindrical bone samples with a virtually inserted, osseointegrated screw (fully bonded interface). Micro-FE models were created including the screw with threads (=reference models) and without threads to quantify the error due to screw geometry simplification. In the hFE models, the screws were modelled without threads and four different trabecular bone material models were used, including orthotropic and isotropic material derived from homogenization with kinematic uniform boundary conditions (KUBC), as well as from periodicity-compatible mixed uniform boundary conditions (PMUBC). Three load cases were simulated (pullout, shear in two directions) and errors in the construct stiffness and the volume average strain energy density (SED) in the peri-implant region were evaluated relative to the micro-FE model with a threaded screw. The pooled error caused by only omitting screw threads was low (max: 8.0%) compared to the pooled error additionally including homogenized trabecular bone material (max: 92.2%). Stiffness was predicted most accurately using PMUBC-derived orthotropic material (error: -0.7 ± 8.0%) and least accurately using KUBC-derived isotropic material (error: +23.1 ± 24.4%). Peri-implant SED averages were generally well correlated (R2 ≥ 0.76), but slightly over- or underestimated by the hFE models and SED distributions were qualitatively different between hFE and micro-FE models. This study suggests that osseointegrated screw-bone construct stiffness can be predicted accurately using hFE models when compared to micro-FE models and that volume average peri-implant SEDs are well correlated. However, the hFE models are highly sensitive to the choice of trabecular bone material properties. PMUBC-derived isotropic material properties represented the best trade-off between model accuracy and complexity in this study.

Biomechanical Study of Intramedullary Versus Extramedullary Implants for Four Types of Subtrochanteric Femoral Fracture.

OBJECTIVES: To compare the biomechanical performance of proximal femoral nail anti-rotation (PFNA), the "upside-down" less invasive plating system (LISS), and proximal femoral locking plate (PFLP) in fixing different fracture models of subtrochanteric fractures. METHODS: Thirty composite femurs were divided into three equal groups (PFNA, PFLP, and reverse LISS). The implant-femur constructs were tested under axial compression load (0-1400 N) from models I to IV, which represented the Seinsheimer type I subtrochanteric fracture, type IIIa subtrochanteric fracture with the posteromedial fragment reduced; type IIIa subtrochanteric fracture with the posteromedial fragment lost; and type IV subtrochanteric fracture, respectively. Axial stiffness was analyzed for each group. Each group was then divided into two subgroups, one of which underwent torsional and axial compression failure testing, while the other subgroup underwent axial compression fatigue testing. The torsional stiffness, failure load, and cycles to failure were analyzed. RESULTS: PFNA had the highest axial stiffness (F = 761.265, p < 0.0001) and failure load (F = 48.801, p < 0.0001) in model IV. The axial stiffness and failure load of the PFLP were significantly higher than those of the LISS (p < 0.0001, p = 0.001). However, no significant difference in axial stiffness was found between models I to III (model I: F = 2.439, p = 0.106; model II: F = 2.745, p = 0.082; model III: F = 0.852, p = 0.438) or torsional stiffness in model IV (F = 1.784, p = 0.187). In fatigue testing, PFNA did not suffer from construct failure after 90,000 cycles of axial compression. PFLP and LISS were damaged within 14,000 cycles, although LISS withstood more cycles than PFLP (t = 3.328, p = 0.01). CONCLUSION: The axial stiffness of the three implants was similar in models I to III. The biomechanical properties of PFNA were the best of the three implants in terms of axial stiffness, failure load, and fatigue testing cycles in model IV. The axial stiffness and failure load of the PFLP were better than those of the reverse LISS, but PFLP had fewer cycles in the fatigue tests than the reverse LISS.

Effects of the number and the position of transfixation pins in acrylic connecting bars.

Acrylic columns are commonly used in external skeletal fixators, especially for fracture management or trans-articular fixations. To the authors' knowledge, there are no studies demonstrating if the number or position of the transfixation pins influence the ultimate strength and stiffness of the acrylic column. The objective of this study was to evaluate the effects of the number and position of transfixation pins (concentric versus eccentric) on the strength and stiffness of acrylic columns placed in axial compression. We hypothesized that strength and stiffness of acrylic columns under axial compression would not be affected by the number or position of the transfixation pins through the column. Three different groups of 12 acrylic columns were constructed with 4, 6, and 8 pins. In each group, 6 columns were constructed with the pins placed concentrically and the remaining 6 columns with the pins placed eccentrically. Each column was then placed under axial compression using a biomechanical testing machine. No significant differences were observed in ultimate strength regarding the number or position of transfixation pins (P = 0.83 and P = 0.27, respectively). However, stiffness was significantly decreased for columns with 4 eccentric pins compared with columns with 6 and 8 eccentric pins (P < 0.01) and with columns with 4 concentric pins (P < 0.001). Although the effects of transfixation pins on the rigidity of acrylic columns do not appear to be clinically significant, these tests were performed only in compression and results might differ if complete external fixator systems are used with different models of testing. Future studies are recommended.

Les colonnes d'acrylique sont couramment utilisées dans les fixateurs externes, notamment pour la gestion des fractures ou les fixations transarticulaires. Selon les auteurs, aucune étude ne démontre si le nombre ou le positionnement des broches de transfixation influence la résistance ultime et la rigidité de la colonne d'acrylique. Les objectifs de cette étude étaient d'évaluer l'effet du nombre et du positionnement des broches de transfixation (concentriques versus excentriques) sur la résistance et la rigidité des colonnes d'acryliques placées en compression axiale. Nous avons émis l'hypothèse que la résistance et la rigidité des colonnes d'acryliques en compression axiale ne seraient pas affectées par le nombre ou le positionnement des broches de transfixation à travers la colonne. Trois groupes différents de douze colonnes acryliques ont été construits avec quatre, six, et huit broches. Dans chaque groupe, six colonnes ont été construites avec les broches placées concentriquement et les six colonnes restantes avec les broches placées de manière excentrique. Chaque colonne a ensuite été placée sous compression axiale à l'aide d'une machine de tests biomécaniques. Aucune différence significative n'a été observée pour la résistance ultime selon le nombre ou le positionnement des broches de transfixation (P = 0,83 et P = 0,27, respectivement). Cependant, la rigidité a été significativement diminuée pour les colonnes avec quatre broches excentriques par rapport aux colonnes avec six et huit broches excentriques (P < 0,01) et avec les colonnes avec quatre broches concentriques (P < 0,001). Bien que les effets des broches de transfixation sur la rigidité des colonnes acryliques ne semblent pas être cliniquement significatifs, ces tests ont été effectués uniquement en compression et les résultats pourraient différer si des systèmes complets de fixateurs externes sont utilisés avec différents modèles de test. De futures études sont recommandées.(Traduit par les auteurs).

Three-dimensional volume-rendered computed tomography application for follow-up fracture healing and volume measurements pre-surgical rib fixation and post-surgical rib fixation.

BACKGROUND: Surgical rib fixation (SRF) is being used increasingly in trauma centers for stabilization of chest wall injuries, in line with new and evolving surgical techniques. Our institution has developed a pathway for the management of chest wall injuries and SRF, which includes a follow-up low-volume, noncontrast computed tomography (CT) scan at 12 months. METHODS: This study was a single-center retrospective study conducted on 25 consecutive patients who underwent SRF between February 2019 and February 2020. All CT measurements were done by a CT radiographer under the supervision of a board-certified radiologist and included the use of three-dimensional volume-rendered images. RESULTS: There were no patients with SRF who experienced hardware failure at 12 months in either flail or nonflail groups. For fractured ribs treated with SRF, complete or partial union occurred in 75 of 76 ribs plated (98.7%). The median ratio for improvement in lung volumes was 1.71 for flail SRF and 1.69 for nonflail SRF in our study. CONCLUSION: Three-dimensional volume-rendered CT at 12 months post-SRF showed good alignment (no hardware failure) and fracture healing of fixed ribs in both flail and nonflail groups. Lung volumes also improved pre-SRF and post-SRF for both flail and nonflail patients. More studies are needed to define how the pattern of rib fracture healing of fixed and nonfixed ribs affects lung volumes. LEVEL OF EVIDENCE: Therapeutic, Level V.

Pelvic fracture-related hypotension: A review of contemporary adjuncts for hemorrhage control.

ABSTRACT: Major pelvic hemorrhage remains a considerable challenge of modern trauma care associated with mortality in over a third of patients. Efforts to improve outcomes demand continued research into the optimal employment of both traditional and newer hemostatic adjuncts across the full spectrum of emergent care environments. The purpose of this review is to provide a concise description of the rationale for and effective use of currently available adjuncts for the control of pelvic hemorrhage. In addition, the challenges of defining the optimal order and algorithm for employment of these adjuncts will be outlined. LEVEL OF EVIDENCE: Review, level IV.

Effectiveness in the Treatment of Intertrochanteric Fracture in Geriatric Patients by A Novel Prototype Carbon Composite External Fixator.

BACKGROUND: Intertrochanteric fracture is a common injury in seniors. Senior patients taking surgical interventions suffer from prolonged bed-rest complications such as pressure ulcer, thromboembolism, or pneumonia, which may lead to high mortality rate. A treatment using external fixators is, therefore, recommendable, and has shown satisfactory outcomes such as early weight-bearing, short hospitalization time and quick union time. Fracture treatments in Vietnam mainly use metal and imported fixation, raising concerns of compatibility and financial issues from patients. OBJECTIVE: This study investigated the in vivo effectiveness in treating an intertrochanteric fracture in Vietnamese geriatric patients by a novel prototype carbon composite external fixator (whose shaft screws near the fracture site) and an available stainless steel external fixator (shaft screw far from the fracture site) already used in Vietnam. METHODS: Fifty-five patients treated with the metal fixator and 54 patients treated with the composite fixator - all aged 60 - 99 - were monitored for treatment results until one year after surgery. RESULTS: The results demonstrated the external fixator's effectiveness, especially the composite prototype, which minimized blood loss, shortened operation time, reduced pain, and provided stable fixation that promoted proper bone union. CONCLUSION: The novel composite fixator prototype in this study was also superior to the current metal fixator in many aspects. Proper application of this method could prove its effectiveness in the surgical cure for fracture in older people. It should be a viable choice for intertrochanteric fracture treatment for senile people in Vietnam.

Evaluating the results of long tubular bone distraction with an advanced rod monolateral external fixator for achondroplasia.

The work aimed to evaluate the effectiveness of the developed distraction system based on the rod external monolateral fixation mechanisms by comparing it with the classical technique of long tubular bones distraction based on the circular multi-axial system. The study included patients with a genetically confirmed diagnosis of achondroplasia. The experimental group consisted of 14 patients who underwent surgical limb lengthening by the rod monolateral external fixator with a distraction system developed by the authors. The lengthening was performed on 28 segments of tubular bones. The majority of the experimental group patients achieved the lengthening value close to the planned one and the deformation correction. The fixation period was averagely 83.8 ± 3.7 days, the regenerate length was 8.5 ± 0.6 cm, and the mechanical strength of the distraction regenerate was 10.3° ± 2.18°. The rod external fixator with a control distraction system developed by the authors has small dimensions and low weight of the external supporting elements of high durability. It is reported to provide a good psychological tolerance of the treatment process and significantly outperforms the circular multi-axis system. Considering the aforementioned, the proposed apparatus can grant good orthopedic care to patients with achondroplasia.

Clinical observation and finite element analysis of cannulated screw internal fixation in the treatment of femoral neck fracture based on different reduction quality.

OBJECTIVE: Femoral neck fracture is one of the most common bone types. The effect of reduction quality on hip joint function and complications after screw internal fixation is not fully understood. To investigate the clinical efficacy and mechanical mechanism of positive buttress, anatomical reduction, and negative buttress in the treatment of femoral neck fracture after cannulated screw fixation. METHODS: Retrospective analysis of patients with femoral neck fracture treated with three cannulated screws internal fixation in our hospital from January 2013 to December 2018. According to the quality of fracture reduction, the patients were divided into positive buttress group, anatomical reduction group, and negative buttress group. Basic information such as injury mechanism, time from injury to surgery, Garden classification and Pauwels classification was collected, Harris scores were performed at 3 months, 6 months, and 12 months after surgery, and postoperative complications (femoral head necrosis, femoral neck shortening, and femoral neck nonunion) were collected. At the same time, three groups of finite element models with different reduction quality were established for stress analysis, their stress clouds were observed and the average displacement and stress of the three groups of models were compared. P < 0.05 was used to represent a statistically significant difference. RESULTS: A total of 225 cases of unilateral femoral neck fractures were included and followed up for an average of 4.12 ± 0.69 years. There was no significant difference in age, gender, side, injury mechanism, time from injury to surgery, BMI, Garden classification, Pauwels classification, and follow-up time among the three groups (P > 0.05). However, there was significant difference in Harris score at 6 and 12 months after operation among the three groups (P < 0.05), which was higher in the positive buttress group and anatomical reduction group than in the negative buttress group. In addition, the incidence of osteonecrosis of the femoral head in the negative buttress group (32.2%) was greater than that in the anatomical reduction group (13.4%) and the positive buttress group (5.4%) (P < 0.05). In addition, the incidence of femoral neck nonunion and femoral neck shortening in the negative buttress group was also higher than that in the anatomical reduction positive buttress group (P < 0.05). The finite element results showed that the stress and fracture end displacement in the negative buttress group were greater than those in the positive buttress group (P < 0.05). CONCLUSION: Both positive buttress and anatomical reduction in the treatment of femoral neck fracture with cannulated screw internal fixation can obtain better clinical effect and lower postoperative complications. Positive brace support and anatomic reduction can limit the restoration of femoral stress conduction. Therefore, it is not necessary to pursue anatomical reduction too deliberately during surgery, while negative buttress reduction should be avoided.

Treatment of posterolateral tibial plateau fractures with a rotational support plate and special pressurizer: technical note and retrospective case series.

BACKGROUND: In tibial plateau fractures, the posterolateral segment of the tibia plateau is frequently affected and challenging to treat. Although there are many surgical approaches and fixation methods for the treatment of these fractures, all of these methods have limitations. We designed a new rotational support plate (RSP) and a special pressurizer that can fix the fracture directly via the anterolateral approach. This method is advantageous because it leads to little trauma, involves a simple operation, and has a reliable fixation effect. This study details the technique of treating these fractures with the RSP and special pressurizer and provides the outcomes. METHODS: From May 2016 to January 2019, the data of 12 patients with posterolateral tibial plateau fractures treated with the RSP and special pressurizer in our hospital were retrospectively analyzed. Postoperative rehabilitation was advised, knee X-rays were taken at follow-ups, and fracture healing, complications, and knee range of motion were assessed. The Hospital for Special Surgery (HSS) knee score and Knee Injury and Osteoarthritis Outcome Score (KOOS) were used to evaluate knee function at the last follow-up. RESULTS: The average follow-up time of all patients was 16.5 months (range, 12-25 months). The average bony union time was 3.2 months (range, 3-4.5 months). At the last follow-up, the average knee range of motion was 138° (range, 107-145°). The average HSS score was 91 (range, 64-98). The average KOOS Symptoms score was 90 (range, 75-96). The average KOOS Pain score was 91 (range, 72-97). The average KOOS ADL score was 91 (range, 74-97). The average KOOS sport/recreation score was 83 (range, 70-90). The average KOOS QOL score was 88 (range, 69-93). Skin necrosis, incision infections, and fixation failure did not occur during the follow-up period. CONCLUSIONS: With our newly designed RSP and special pressurizer, posterolateral tibial plateau fractures can be easily and effectively reduced and fixed through the anterolateral approach, which serves as a novel treatment for posterolateral tibial plateau fractures.

Proximal Humerus Fractures: What Alignment is Acceptable in Children 10 and Up?

BACKGROUND: Fractures of the proximal humerus in skeletally immature patients are rare, and even rarer still in individuals approaching skeletal maturity. Concepts regarding remodeling potential, amount of deformity and functional demands can guide our treatment decision making, but criteria are poorly defined. The purpose of this manuscript is to discuss the issues and the best available evidence. METHODS: A search of the English literature was carried out using PubMed to identify papers on the topic of proximal humerus fractures in skeletally immature individuals. RESULTS: The literature available on the topic of pediatric proximal humerus fractures is limited, especially regarding fractures in patients approaching skeletal maturity. Certainly, as the remodeling potential decreases and the amount of deformity and functional demand increase, the need for operative treatment increases. The exact tolerances and criteria have not been established. A variety of surgical techniques exist, and have been shown to be helpful. CONCLUSIONS: Operative treatment may be necessary in individuals approaching skeletal maturity. Concepts discussed in this paper regarding remodeling, amount of deformity and functional demand may help the surgeon to make appropriate treatment decisions. Future prospective comparative studies which are pending will hopefully shed further light on this matter.

Lateral entry pins and Slongo's external fixation: which method is more ideal for older children with supracondylar humeral fractures?

OBJECTIVE: The standard surgical treatment for supracondylar humeral fractures in children is closed reduction and percutaneous pinning. Given the need for greater fixation strength and higher risk of joint stiffness for children older than 8 years, external fixation is often performed for treating supracondylar humeral fractures in older children. The aim of this study was to compare the efficacy of lateral entry pins and Slongo's external fixation for treating supracondylar humeral fractures in older children. METHODS: Children older than 8 years who underwent surgery for supracondylar humeral fractures at our hospital for surgery from January 2016 to December 2020 are to be retrospectively assessed. One group (n = 36) underwent internal fixation and percutaneous pinning with three lateral Kirschner wires, and the other group (n = 32) underwent Slongo's external fixator surgery. The demographic data, operation duration, number of fluoroscopies, and fracture healing time were compared between both groups. The elbow joint function was evaluated 6 months after the surgery on the basis of fracture healing time, lifting angle, elbow joint range of motion (ROM), and Flynn score. The incidence of postoperative complications was also recorded. RESULTS: There was no significant difference between the two patient groups in terms of the demographic parameters. Compared to external fixation surgery, Kirschner wire surgery required shorter duration and fewer fluoroscopies (P < 0.05). Nevertheless, the fracture healing time was significantly less (P < 0.05), and the elbow ROM and Flynn scores were higher in the external fixator group compared to the Kirschner wire fixation group (P < 0.05). There was one case of secondary fracture displacement in the Kirschner wire group and one of pin tract infection in the external fixator group. No other iatrogenic injuries or complications were observed. CONCLUSION: Maybe Slongo's external fixator is a suitable alternative treatment option for supracondylar humeral fractures in children older than 8 years since it can achieve better fixation strength and early restoration of elbow joint movement with a lower risk of joint stiffness.

A report of a novel approach for the management of paediatric mandibular fracture using a prefabricated adaptable surgical splint.

Paediatric facial fractures are relatively rare. The inherent elasticity of the bones with more of the cartilage than that of the mineralised bone accounts for this. The principles involved in the management of facial fractures are the same irrespective of the age of the patient; however, in children, the techniques used are necessarily modified by certain anatomical, physiological, psychological and feeding factors related to childhood and the parents. In an attempt to keep the treatment and fixation technique simple, the case, presented here, describes the management of a mandibular parasymphyseal fracture in a 16-month-old child with the use of a prefabricated adaptable surgical splint.

Fracturas avulsivas tibiales del ligamento cruzado posterior fijadas con tornillos: un estudio clínico y radiológico / Screw fixation of posterior cruciate ligament tibial avulsion fractures: a clinical and radiographic study

OBJETIVO: Realizar la evaluación clínica, imagenológica y funcional de pacientes con fracturas avulsivas tibiales del ligamento cruzado posterior (FTALCPs) fijadas con tornillos canulados con técnica abierta. MÉTODOS: Los pacientes con FTALCP operados entre 2010 y 2017 fueron revisados retrospectivamente. Criterios de inclusión: fracturas agudas, desplazadas, test de cajón posterior grado III, lesiones combinadas de rodilla, seguimiento > 12 meses. Se excluyeron pacientes > 65 años, con FTALCPs bilaterales, lesiones del ligamento cruzado posterior (LCP) intrasustancia, test de cajón posterior grados I-II, fracturas expuestas, lesiones neurovasculares, y seguimientos < 12 meses. Objetivo primario: medir la estabilidad clínica mediante test de cajón posterior y radiografía de estrés arrodillada comparativa. Objetivos secundarios: nvaluar la consolidación en radiografías, complicaciones y funcionalidad con las escalas de Lysholm y Tegner. Resultados Se incluyeron 20 pacientes, con edad media de 41 años (rango: 32 a 61 años). El seguimiento promedio fue de 33,9 meses (rango: 12 a 82 meses). La estabilidad clínica mejoró en 93% (cajón posterior postoperatorio grados 0 y I) de los pacientes. La radiografía de estrés arrodillada mostró una diferencia promedio de 2,6 mm (rango: 0,1 mm a 6,8 mm) de traslación posterior al comparar con el lado sano. Todas las fracturas consolidaron. Siete pacientes presentaron complicaciones. El puntaje promedio de la escala de Lysholm al final del seguimiento fue de 85,17. El promedio preoperatorio del puntaje en la escala de Tegner no varió significativamente en comparación con el postoperatorio. CONCLUSIONES: La fijación de fracturas avulsivas tibiales del LCP con tornillos canulados con técnica abierta es efectiva en restaurar la estabilidad posterior y lograr la consolidación ósea. La funcionalidad clínica a mediano plazo es buena, a pesar del alto número de complicaciones y lesiones concomitantes. NIVEL DE EVIDENCIA: tipo IV.

OBJECTIVE: To report mid-term clinical, radiographic, and functional outcomes following open reduction and fixation of posterior cruciate ligament tibial avulsion fractures (PCLTAFs) with cannulated screws. METHODS: This is a retrospective analysis of patients with PCLTAF operated on from August 2010 to April 2017. Patients with acute fractures, with more than 2 mm of displacement and grade III on the posterior drawer test, combined or not to knee injuries, were included. Patients older than 65 years of age, with bilateral avulsion fractures, intrasubstance posterior cruciate ligament (PCL) lesions, stable grade-I to -II on the posterior drawer test, concomitant neurovascular injuries, mid-substance tears, open fractures, and less than 12 months of follow-up were excluded. Primary outcomes: the clinical stability was assessed using the posterior drawer test and a single comparative knee stress radiograph. Secondary outcomes: radiographic consolidation, complications, Lysholm score, and Tegner activity score. RESULTS: In total, 20 patients with a mean age of 41 years (range: 32 to 61 years) were included. The mean follow-up was of 33.9 months (range: 12 to 82 months). Clinical stability (grade 0 or I on the posterior drawer test) was observed in 93% of the patients. The mean difference in contralateral posterior displacement was of 2.6 mm (range: 0.1 mm to 6.8 mm) on a single comparative knee stress radiograph. All fractures presented radiological consolidation. Seven patients developed complications. The mean Lysholm score at the last follow-up visit was of 85.17. The postoperative Tegner activity scores did no vary significantly compared to the preinjury scores. CONCLUSIONS: Cannulated screw fixation of a displaced PCLTAF through a posterior approach restores clinical and radiographic stability and has excellent union rates. The mid-term functional outcomes are good despite the high rates of combined knee lesions and postoperative complications. LEVEL OF EVIDENCE: IV.

A novel low-profile external skeletal fixator for type IIIB open tibial fractures: A biomechanical and clinical pilot study.

BACKGROUND: Although external fixator is standard for managing staged treatment of open tibial fracture, the main disadvantage of this device is too bulky to be tolerated by most patients for longtime use. The purposes of this pilot study were to compare the biomechanical properties of a novel low-profile external fixator (LP-ESF) with a traditional ESF and also to evaluate its performance in patients with Gustilo type IIIb tibial open fractures. METHODS: A prospective clinical pilot study started from January 2015 to December 2017, and 18 patients with Gustilo type IIIb open tibial fractures underwent the fixation with a novel LP-ESF system. The biomechanical properties of the LP-ESF were compared with the Synthes External Fixation System according to the standard ASTM F1541-02. These patients were divided into two groups according to the size of bony defect. The postoperative clinical outcomes were subsequently collected. RESULTS: The biomechanical properties of the LP-ESF were comparable with those of Synthes External Fixation System and had an improved the axial/torsional stiffness and ultimate strength. In the clinical study, all patients with LP-ESF had fracture union. The duration of application of LP-ESF was 3.5 to 18 months until fracture union. In 10 of 18 patients, their fractures were immobilized with the LP-ESF until bone union, and no pin tract infection and no chronic osteomyelitis were recorded. The 36-Item Short Form Health Survey life quality and health survey were good to excellent in these patients. Notably, the LP-ESF allowed a patient with severe bone and soft-tissue defects to preserve the leg and joints function. CONCLUSION: In this study, we found that the novel LP-ESFs had improved clinical outcomes. The long-term LP-ESF application seems to be tolerable in our patients. This novel approach permits better controls in deep infection and faster healing of fractures, and thus may provide a viable alternative treatment for Gustilo type IIIb open tibial fractures.

Closed reduction percutaneous pinning versus open reduction internal fixation in the treatment of intraarticular distal radius fractures: Mean four-year results.

BACKGROUND: This study was performed to compare the results of closed reduction percutaneous pinning (CRPP) versus open reduction internal fixation with a volar locking plate (ORIF) in the treatment of intraarticular distal radius fractures (IDRF) average four-year follow-up. METHODS: In this study, 43 patients had unilateral intraarticular distal radius fractures (type B and C) treated with CRPP (n=19; 11 males and eight females) and ORIF (n=24; 14 males and 10 females) were retrospectively evaluated. The mean follow-up was 50.3 months (12-74) at the CRPP group and 45.2 months (40-65) at the ORIF group. The mean age was 50.8 years (29-73) in the CRPP group and 51.5 (19-75) in the ORIF group. The patients were evaluated functionally and radiologically at the last follow-up. RESULTS: There was no statistically significant difference between the groups concerning follow-up, age, and gender. However, there was no statistical difference concerning grip power and the range of motion. The Disabilities of the Arm, Shoulder and Hand Score (Q-DASH) was better in the ORIF group. Voler tilt and radial height measurements were statistically significantly better in the ORIF group. Degenerative arthritis was 63% in the CRPP group and 41% in the ORIF group, and there was no statistically significant difference. CONCLUSION: ORIF with a volar locking plate has better functional and radiological results than CRPP in IDRF patients' average four-year follow-up.

Interventions for treating fractures of the patella in adults.

BACKGROUND: Fractures of the patella (kneecap) account for around 1% of all human fractures. The treatment of these fractures can be surgical or conservative (such as immobilisation with a cast or brace). There are many different surgical and conservative interventions for treating fractures of the patella in adults. This is an update of a Cochrane Review first published in 2015. OBJECTIVES: To assess the effects (benefits and harms) of interventions (surgical and conservative) for treating fractures of the patella in adults. SEARCH METHODS: We searched CENTRAL (2020, Issue 1), MEDLINE, Embase, LILACS, trial registers and references lists of articles to January 2020. SELECTION CRITERIA: We included randomised controlled trials (RCTs) or quasi-RCTs that evaluated any surgical or conservative intervention for treating adults with fractures of the patella. The primary outcomes were patient-rated knee function, knee pain and major adverse outcomes. DATA COLLECTION AND ANALYSIS: At least two review authors independently selected eligible trials, assessed risk of bias and cross-checked data extraction. Where appropriate, we pooled results of comparable trials. MAIN RESULTS: We included 11 small trials involving 564 adults (aged 16 to 76 years) with patella fractures. There were 340 men and 212 women; the gender of 12 participants was not reported. Seven trials were conducted in China and one each in Finland, Mexico, Pakistan and Turkey. All 11 trials compared different surgical interventions for patella fractures. All trials had design flaws, such as lack of assessor blinding, which put them at high risk of bias, potentially limiting the reliability of their findings. No trial reported on health-related quality of life, return to previous activity or cosmetic appearance. The trials tested one of seven comparisons. In the following, we report those of the main outcomes for which evidence was available for the three most important comparisons. Four trials (174 participants) compared percutaneous osteosynthesis versus open surgery. Very low-quality evidence means that we are uncertain of the findings of no clinically important difference between the two interventions in patient-rated knee function at 12 months (1 study, 50 participants) or in knee pain at intermediate-term follow-up at eight weeks to three months. Furthermore, very low-quality evidence means we are uncertain whether, compared with open surgery, percutaneous fixation surgery reduces the incidence of major adverse outcomes, such as loss of reduction and hardware complications, or results in better observer-rated knee function scores. Two trials (112 participants) compared cable pin system (open or percutaneous surgery) versus tension band technique. The very low-quality evidence means we are uncertain of the findings at one year in favour of the cable pin system of slightly better patient-rated knee function, fewer adverse events and slightly better observer-rated measures of knee function. There was very low-quality evidence of little clinically important between-group difference in knee pain at three months. Very low-quality evidence from two small trials (47 participants) means that we are uncertain of the findings of little difference between biodegradable versus metallic implants at two-year follow-up in the numbers of participants with occasional knee pain, incurring adverse events or with reduced knee motion. There was very low-quality and incomplete evidence from single trials for four other comparisons. This means we are uncertain of the results of one trial (28 participants) that compared patellectomy with advancement of vastus medialis obliquus surgery with simple patellectomy; of one quasi-RCT (56 participants) that compared a new intraoperative reduction technique compared with a standard technique; of one quasi-RCT (65 participants) that compared a modified tension band technique versus the conventional AO tension band wiring (TBW) technique; and of one trial (57 participants) that compared adjustable patella claws and absorbable suture versus Kirschner wire tension band. AUTHORS' CONCLUSIONS: There is very limited evidence from nine RCTs and two quasi-RCTs on the relative effects of different surgical interventions for treating fractures of the patella in adults. There is no evidence from trials evaluating the relative effects of surgical versus conservative treatment or different types of conservative interventions. Given the very low-quality evidence, we are uncertain whether methods of percutaneous osteosynthesis give better results than conventional open surgery; whether cable pin system (open or percutaneous surgery) gives better results than the tension band technique; and whether biodegradable implants are better than metallic implants for displaced patellar fractures. Further randomised trials are needed, but, to optimise research effort, these should be preceded by research that aims to identify priority questions.

Cast immobilization is non-inferior to volar locking plates in relation to QuickDASH after one year in patients aged 65 years and older: a randomized controlled trial of displaced distal radius fractures.

AIMS: To compare operative and nonoperative treatment for displaced distal radius fractures in patients aged over 65 years. METHODS: A total of 100 patients were randomized in this non-inferiority trial, comparing cast immobilization with operation with a volar locking plate. Patients with displaced AO/OTA A and C fractures were eligible if one of the following were found after initial closed reduction: 1) dorsal angulation > 10°; 2) ulnar variance > 3 mm; or 3) intra-articular step-off > 2 mm. Primary outcome measure was the abbreviated version of the Disabilities of the Arm, Shoulder and Hand questionnaire (QuickDASH) after 12 months. Secondary outcome measures were the Patient-Rated Wrist and Hand Evaluation (PRWHE), EuroQol-5 dimensions 5-level questionnaire (EQ-5D-5L), range of motion (ROM), grip strength, "satisfaction with wrist function" (score 0 to 10), and complications. RESULTS: In all, 89 women and 11 men were included. Mean age was 74 years (65 to 91). Nonoperative treatment was non-inferior to operation with a five-point difference in median QuickDASH after 12 months (p = 0.206). After three and six months QuickDASH favoured the operative group (p = 0.010 and 0.030). Median values for PRWHE were 19 (interquartile range (IRQ) 10 to 32) in the operative group versus ten (IQR 1 to 31) in the nonoperative group at three months (p = 0.064), nine (IQR 2 to 20) versus five (IQR 0 to 13) (p = 0.020) at six months, and two (IQR 0 to 12) versus zero (IQR 0 to 8) (p = 0.019) after 12 months. Range of motion was similar between the groups. The EQ-5D-5L index score was better (mean difference 0.07) in the operative group at three and 12 months (p = 0.008 and 0.020). The complication rate was similar (p = 0.220). The operated patients were more satisfied with wrist function (median 8 (IQR 6 to 9) vs 6 (IQR 5 to 7) at three months, p = 0.002; 9 (IQR 7 to 9) vs 8 (IQR 6 to 8) at six months, p = 0.002; and 10 (IQR 8 to 10) vs 8 (IQR 7 to 9) at 12 months, p < 0.001). CONCLUSION: Nonoperative treatment was non-inferior to operative treatment based on QuickDASH after one year. Patients in the operative group had a faster recovery and were more satisfied with wrist function. Results from previous trials comparing operative and nonoperative treatment for displaced distal radius fractures in the elderly vary between favouring the operative group and showing similar results between the treatments. This randomized trial suggests that most elderly patients may be treated nonoperatively. Cite this article: Bone Joint J 2021;103-B(2):247-255.

The PINS Trial: a prospective randomized clinical trial comparing a traditional versus an emollient skincare regimen for the care of pin-sites in patients with circular frames.

AIMS: Pin-site infection remains a significant problem for patients treated by external fixation. A randomized trial was undertaken to compare the weekly use of alcoholic chlorhexidine (CHX) for pin-site care with an emollient skin preparation in patients with a tibial fracture treated with a circular frame. METHODS: Patients were randomized to use either 0.5% CHX or Dermol (DML) 500 emollient pin-site care. A skin biopsy was taken from the tibia during surgery to measure the dermal and epidermal thickness and capillary, macrophage, and T-cell counts per high-powered field. The pH and hydration of the skin were measured preoperatively, at follow-up, and if pin-site infection occurred. Pin-site infection was defined using a validated clinical system. RESULTS: Out of 116 patients who were enrolled in the study, 23 patients (40%) in the CHX group and 26 (44%) in the DML group had at least one bad or ugly pin-site infection. This difference was not statistically significant (p = 0.71). There was no significant relationship between pH or hydration of the skin and pin-site infection. The epidermal thickness was found to be significantly greater in patients who had a pin-site infection compared with those who did not (p = 0.01). Skin irritation requiring a change of treatment occurred in four patients (7%) using CHX, and none using DML. CONCLUSION: We found no significant difference in the incidence of pin-site infection between the CHX and DML treatment groups. Dermol appeared to offer a small but significant advantage in terms of tolerability. We did not find a significant association between patient or treatment related factors and pin-site infection. It is therefore difficult to make specific recommendations based upon these results. The use of either cleaning agent appears to be appropriate. Cite this article: Bone Joint J 2021;103-B(2):279-285.

Anatomical study of the ideal cortical bone trajectory in the lumbar spine.

BACKGROUND: To explore the ideal trajectory of lumbar cortical bone trajectory screws and provide the optimal placement scheme in clinical applications. METHODS: Lumbar computed tomography (CT) data of 40 patients in our hospital were selected, and the cortical vertebral bone contour model was reconstructed in three dimensions (3D). Depending on the different regions of the screw through the entrance and exit of the pedicle, 9 trajectories were obtained through combinational design: T-Aa, T-Ab, T-Ac, T-Ba, T-Bb, T-Bc, T-Ca, T-Cb, and T-Cc. Cortical bone trajectory (CBT) screws with appropriate diameters were selected to simulate screw placement and measure the parameters corresponding to each trajectory (screw path diameter, screw trajectory length, cephalad angle, and lateral angle), and then determine the optimal screw according to the screw parameters and screw safety. Then, 23 patients in our hospital were selected, and the navigation template was designed based on the ideal trajectory before operation, CBT screws were placed during the operation to further verify the safety and feasibility of the ideal trajectory. RESULTS: T-Bc and T-Bb are the ideal screw trajectories for L1-L2 and L3-L5, respectively. The screw placement point is located at the intersection of the inner 1/3 vertical line of the superior facet joint and the bottom 1/3 horizontal line of the outer crest of the vertebral lamina (i.e., 2-4 mm inward at the bottom 1/3 of the outer crest of the vertebral lamina). CBT screws were successfully placed based on the ideal screw trajectory in clinical practice. During the operation or the follow-up period, there were no adverse events. CONCLUSION: CBT screw placement based on the ideal screw trajectory is a safe and reliable method for achieving effective fixation and satisfactory postoperative effects.

The Effect of a PEEK Material-Based External Fixator in the Treatment of Distal Radius Fractures with Non-Transarticular External Fixation.

OBJECTIVE: To explore the effect of a PEEK material-based external fixator in the treatment of distal radius fractures with non-transarticular external fixation. METHODS: There were 48 patients in this prospective comparative study. They were divided into two groups according to the materials used: the PEEK group and the titanium group. Wrist dorsiflexion, palmar flexion, pronation, supination, radial deviation, ulnar deviation, grip strength of the palm on the affected side, kneading force, Visual Analogue Scale/Score (VAS), Disabilities of the Arm, Shoulder, and Hand (DASH) score, operation time, frequency of fluoroscopy procedures, and X-ray results were compared between the two groups. Functional recovery was evaluated at the last follow-up according to the wrist joint evaluation criteria. RESULTS: The baseline data were comparable between the two groups, and no significant differences were found in age, sex, fracture types (P > 0.05). There was no significant difference between the two groups in the results of DASH, grip strength, and recovery of pinch force and wrist function (dorsiflexion, clavicle, ulnar deviation, deviation, pronation, and supination) (P > 0.05). Normal limb function was achieved in the two groups of patients at an average of 6 weeks after surgery, and there was no significant difference in X-ray examination radial height (10.60 ± 1.59 vs 11.00 ± 1.53, P = 0.687), radial inclination (1.11 ± 0.24 vs 1.12 ± 0.24, P = 0.798), volar tilt (10.33 ± 2.13 vs 10.00 ± 2.08, P = 0.660), ulnar variance (20.87 ± 3.00 vs 20.38 ± 3.04, P = 0.748), and step-off persistence (1.73 ± 0.69 vs 1.68 ± 0.72, P = 0.425) between the two groups (P > 0.05). However, the operation time (54.80 ± 12.20 vs 85.23 ± 15.14, P = 0.033) and number of fluoroscopy procedures (36.93 ± 6.89 vs 64.77 ± 9.74, P = 0.000) in the PEEK group were significantly reduced compared with those in the titanium group. CONCLUSION: Compared with the traditional titanium external fixator, the PEEK composite external fixator has advantages, such as a shorter operation time and fewer fluoroscopy procedures when used to treat different types of distal radius fracture.