Cytotoxicity assessment of eluates from vacuum-forming thermoplastics.

OBJECTIVES: This study aimed to evaluate possible cytotoxic effects of thermoplastic materials commonly used for occlusal splints and orthodontic appliances. METHODS: Seven thermoplastics were included: three variants of the Essix sheets (C+, Plus, and Tray Rite; Dentsply Sirona), three thermoplastics (Bleach Heavy, Splint, and X-Heavy; Cavex Holland) and Invisalign (Align Technology). Cylindrical specimens (n = 24; 10 mm diameter) were incubated in cell culture medium for 24 h and 14 days. After incubation, the medium was collected, serially diluted, and dosed to primary human gingival fibroblasts in triplicate. Medium processed like the samples was used as negative control. Cell viability was evaluated by XTT and LDH assay to assess metabolic activity and membrane integrity, respectively. Next, cell cycle was assessed with flow cytometry after exposing HGFs to undiluted extracts. RESULTS: The 24-hour and 14-day extracts did not evoke cytotoxicity after 24-hour incubation. No significant differences in cell viability (one-way ANOVA, p > 0.05 ) in the XTT and LDH assays or in cell cycle distribution between the different materials (two-way ANOVA, p > 0.05 ). CONCLUSION: The thermoplastics tested in the study showed no evident in-vitro cytotoxic effects. Further investigation should focus on determining which compounds are released from thermoplastic materials and assessing potential toxicity related to exposure to these compounds. CLINICAL SIGNIFICANCE: Our study adds to the growing body of evidence on the biocompatibility of dental thermoplastics. This can aid clinical decision-making, as thermoplastics are expected to be safe to use in terms of cytotoxicity.

Comparative efficacy of pharmaceutical (Ibuprofen) and non-pharmaceutical (photobiomodulation, and chewing gum) interventions for pain reduction after elastomeric separator placement in orthodontic patients: a randomized clinical trial.

This study compared the efficacy of pharmaceutical (ibuprofen) and non-pharmaceutical (photobiomodulation and chewing gum) interventions for pain reduction after elastomeric separator placement in orthodontic patients. This 3-arm, parallel-group randomized clinical trial was conducted on 90 orthodontic patients. The level of anxiety and pain threshold of patients were measured at baseline using the Pain Catastrophizing Scale (PCS) and an algometer, respectively. The patients were randomly assigned to three groups (n = 30; equal number of males and females). In the laser group, 940 nm diode laser (Epic X, Biolase, USA, 12.35 J/cm2 energy density and 300 mW power in continuous-wave mode., The cross-sectional area of the laser handpiece tip was 1.7 cm2.) was irradiated to the buccal and lingual surfaces for 35 s each, prior to placement of separators. In the gum group, the patients were asked to chew a piece of sugar-free gum immediately after the placement of separators and repeat every 8 h for 5 min for one week in case of pain. In the ibuprofen group, patients received 400 mg ibuprofen (Hakim Pharmaceuticals, Tehran, Iran) after the placement of separators and were asked to take one tablet every 8 h for one week in case of pain. The pain score was recorded using the Modified McGill Pain Questionnaire (MPQ). The normality of data distribution was analyzed by the Kolmogorov-Smirnov test. ANOVA was applied to compare age, and the Chi-square and Monte Carlo Chi-square tests were used to compare gender and patient responses to the questions among the groups. Repeated measures ANOVA was used to compare the pain score at different time points and among the three groups. All statistical analyses were conducted using SPSS version 19 (SPSS Inc., Chicago, IL, USA) at 0.05 level of significance. Data analysis in this study had an intention to treat approach. Although the pain score was slightly lower in ibuprofen and gum groups, the difference among the three groups was not statistically significant (P > 0.05). 'Repeated measures ANOVA showed no significant effect of method of pain reduction on pain score (F = 1.520, P = 0.225). Time had a significant effect on pain score (F = 20.310, P < 0.001). The interaction effect of time and pain reduction method on pain score was not significant (F = 0.737, P = 0.651). patients experienced a lower level of pain in the ibuprofen and chewing gum groups, the difference in pain score was not significant among the three groups (P = 0.225). patients experienced a higher level of pain at 12 and 24 hours after the placement of separators in all groups. Considering the comparably equal analgesic efficacy of this modalities, non-pharmaceutical interventions can be used for pain reduction of elastomeric separator. The study protocol was registered in the Iranian Registry of Clinical Trials (IRCT20210927052611N1). Date of registration 2022/03/14.

Evaluation of Treatment Protocols in Surgically Assisted Rapid Maxillary Expansion by Finite Element Analysis.

Background and Objectives: Transverse maxillary deficiency is an important maxillary anomaly that is very common in society and remains current in orthodontics. The maxillary expansion has been used in treatment for a long time. While maxillary expansion can be performed with rapid maxillary expansion in young adults, it is performed with surgically assisted rapid maxillary expansion (SARME) in individuals who have reached skeletal maturity. No consensus has been reached on the most successful surgical technique or the ideal appliance for treating transverse maxillary deficiency. Accordingly, we aimed to evaluate various surgical techniques and orthodontic appliances for treating transverse maxillary deficiency using the finite element method (FEM) to identify the treatment protocol that minimizes stress on the maxillary bone and teeth. Materials and Methods: On the virtual models obtained from the cone beam computed tomography of a patient, two different incisions (the pterygomaxillary junction is separated and not separated) were made and combined using three different orthodontic appliances (tooth, bone, and hybrid assisted). Then, stresses over the maxillary bone and maxillary teeth were calculated by FEM. Results: Our results showed that when the pterygomaxillary plates were separated, fewer stresses were observed on the bone and teeth. Although hybrid-supported appliances created less stress on the teeth than tooth-supported appliances and no difference was found between bone-supported appliances, it was found that hybrid-supported appliances created less stress on the bone than the other appliances. Conclusions: The separation of the pterygomaxillary junction in the SARME operation and the use of a bone-supported or hybrid-supported appliance would place less stress on the bone and teeth.

Well-Being of Orthodontic Patients Wearing Orthodontic Appliances.

Background and Objectives: Orthodontic appliances may cause discomfort for patients. This could influence the person's psychological well-being. The aim of this study was to examine the psychological health of patients wearing orthodontic appliances. It is important to analyze the well-being of patients during orthodontic treatment because it is started in a young age and it may affect one's psychological health. Therefore, for doctors and patients, it is important to understand and take every aspect of the treatment into consideration when deciding when to start the treatment and what appliance to choose. Materials and Methods: A total of 339 patients filled out an anonymous questionnaire. They were divided into four groups according to their age and type of appliance. The main reasons to seek treatment were crooked teeth and a bad bite. There was a statistically significant difference between women and men as women sought treatment because of crooked teeth; meanwhile, men indicated bad bite as their main reason for seeking treatment. Results: A total of 48.7% of subjects noted that they were feeling good during treatment; however, 4% of all patients noted that they were feeling bad. A total of 45% of subjects stated that they felt unhappy at least sometimes. A total of 43% of subjects felt stress. Conclusions: Even though patients indicated various negative aspects on their well-being during treatment, for the majority of the subjects, the end results significantly increased their psychological well-being.

New Generation of Orthodontic Elastomeric Ligature to Prevent Enamel Demineralization In Vivo.

This study aimed to synthesize a novel elastomeric ligature with dimethylaminohexadecyl methacrylate (DMAHDM) grafted, providing a new strategy for improving the issue of enamel demineralization during fixed orthodontics. DMAHDM was incorporated into elastomeric ligatures at different mass fractions using ultraviolet photochemical grafting. The antibacterial properties were evaluated and the optimal DMAHDM amount was determined based on cytotoxicity assays. Moreover, tests were conducted to evaluate the in vivo changes in the mechanical properties of the elastomeric ligatures. To assess the actual in vivo effectiveness in preventing enamel demineralization, a rat demineralization model was established, with analyses focusing on changes in surface microstructure, elemental composition, and nanomechanical properties. Elastomeric ligatures with 2% DMAHDM showed excellent biocompatibility and the best antibacterial properties, reducing lactic acid production by 65.3% and biofilm bacteria by 50.0% within 24 h, without significant mechanical property differences from the control group (p > 0.05). Most importantly, they effectively prevented enamel demineralization in vivo, enhancing elastic modulus by 73.2% and hardness by 204.8%. Elastomeric ligatures incorporating DMAHDM have shown great potential for application in preventing enamel demineralization, providing a new strategy to solve this issue during fixed orthodontics.

Outcome and predictive factors for perforation in orthodontic rubber band-assisted endoscopic submucosal dissection of fibrotic colorectal lesions.

Endoscopic submucosal dissection (ESD) of fibrotic colorectal lesions is difficult and has a high complication rate. There are only a few reports on the utility of orthodontic rubber band (ORB) traction in reducing the difficulty of this procedure. This study aimed to investigate the risk factors for perforation when applying ORB traction during ESD of fibrotic colorectal lesions. We continuously collected the clinical data of 119 patients with fibrotic colorectal lesions who underwent ESD with ORB and clip traction between January 2019 and January 2024. Possible risk factors for perforation were analyzed. The median ORB-ESD operative time was 40 (IQR 28-62) min, and the en bloc and R0 resection rates were 94.1% and 84.0%, respectively. Perforation occurred in 16 of 119 patients (13.4%). The lesion size, lesion at the right half of the colon or across an intestinal plica, the degree of fibrosis, operation time, and the surgeon's experience were associated with perforation during ORB-ESD (P < 0.05). Multivariate logistic regression analysis showed that lesions in the right colon (OR 9.027; 95% CI 1.807-45.098; P = 0.007) and those across an intestinal plica (OR 7.771; 95% CI 1.298-46.536; P = 0.025) were independent risk factors for perforation during ORB-ESD. ORB-ESD is an effective and feasible approach to treat fibrotic colorectal lesions. Adequate preoperative evaluation is required for lesions in the right colon and across intestinal plicas to mitigate the risk of perforation.

Novel antibacterial orthodontic elastomeric ligature with oral biofilm-regulatory ability to prevent enamel demineralization.

OBJECTIVES: To synthesize a novel antibacterial orthodontic elastomeric ligature incorporating dimethylaminohexadecyl methacrylate (DMAHDM) for the first time to prevent enamel demineralization during orthodontic therapy. METHODS: Various mass fractions of DMAHDM (ranging from 0 % to 20 %) were grafted onto commercial elastomeric ligatures using an ultraviolet photochemical grafting method and were characterized. The optimal DMAHDM concentration was determined based on biocompatibility and mechanical properties, and the antibacterial efficacy was evaluated in a whole-plaque biofilm model. TaqMan real-time polymerase chain reaction and fluorescence in situ hybridization were used to assess the microbial regulatory ability of the multispecies biofilms. Furthermore, an in vitro tooth demineralization model was established to explore its preventive effects on enamel demineralization. Statistical analysis involved a one-way analysis of variance and LSD post hoc tests at a significance level of 0.05. RESULTS: The elastomeric ligature containing 2 % mass fraction of DMAHDM exhibited excellent mechanical properties, favorable biocompatibility, and the most effective antibacterial ability against microorganisms, which decreased by almost two logarithms (P < 0.05). It significantly reduced the proportion of Streptococcus mutans in the multispecies plaque biofilm by 25 % at 72 h, leading to an enhanced biofilm microenvironment. Moreover, the novel elastomeric ligature demonstrated an obvious preventive effect on enamel demineralization, with an elastic modulus 30 % higher and hardness 62 % higher than those of the control group within 3 months (P < 0.05). SIGNIFICANCE: The integration of DMAHDM with an elastomeric ligature holds significant promise for regulating biofilms and preventing enamel demineralization in orthodontic applications.

Mechanical effect of different patterns for preparation of orthodontic appliances: An experimental study.

Archwire bending is the key to orthodontic treatment, and multi-time bendings are inevitable during manual and robotic automated bending. The purpose of this paper is to quantitatively evaluate the mechanical effects of the different preparation modes and to compare the mechanical properties of the orthodontic loops in one and multiple bends. Three types of typical stainless steel orthodontic loops (vertical loop, T-loop, and L-loop) were used to quantify the mechanical effect of patterns for preparation by experimental comparison between loops with different bending times by using an orthodontic force tester (OFT). The results were statistically analyzed by t-test. The fracture test of the stainless steel archwire was also carried out, and the bending times at fracture were recorded. Results of the tests indicate that one-time and multi-time bending have a significant mechanical effect on orthodontic appliances. Multi-time bending causes significant mechanical decreases and can damage the appliances.

Effects of different expansion appliances and surgical incisions on maxillary expansion: A finite element analysis.

PURPOSE: This study aims to assess the impact of different surgical techniques and three expansion appliances on maxillary expansion in adults using finite element analysis (FEA), with a focus on maxillary displacement and stress on surrounding structures. METHODS: Seven different FEA models were created to compare different surgical techniques and three different expansion appliances. Model I represented a bone-supported appliance without surgical assistance. Model II, Model III, and Model IV were surgically assisted rapid palatal expansion (SARPE) models without pterygomaxillary suture disjunction (PMD). Model V, Model VI, and Model VII were SARPE models with PMD. RESULTS: The largest displacement at the anterior nasal spine (ANS) was recorded for Model II (2.95 mm). For the posterior nasal spine (PNS), the highest displacement was observed in Models V, VI, VII (2.50 mm), with the lowest in Model III (0.79 mm). Stress analysis revealed the highest stress in Model I, with models featuring PMD displaying nearly zero stress at all anatomical points, highlighting distinct expansion patterns and stress distributions between models with and without PMD. CONCLUSION: SARPE models with PMD demonstrated a parallel expansion of the maxilla with minimal stress, while the miniscrew assisted rapid maxillary expansion (MARPE) model displayed transverse rotation. SARPE models without PMD exhibited a V-shaped expansion pattern. SARPE models with PMD represent an optimal approach for achieving uniform expansion and minimizing stress, with stress levels nearly negligible at all anatomical points in models with PMD.

Interdisciplinary Role of Orthodontist in Screening and Managing Obstructive Sleep Apnea in Children and Adults.

Obstructive sleep apnea (OSA) can affect children and adults, and, if left untreated, could have a major impact on the general and overall well-being of the patient. Dental health care providers and orthodontists have an interdisciplinary role in screening patients at risk for OSA and make a referral to establish a definitive diagnosis by a sleep physician. The gold standard of diagnostic testing is polysomnography. The adeno-tonsillar hypertrophy is the primary cause of sleep apnea in children; therefore, adeno-tonsillectomy must be the first line of treatment. Post adeno-tonsillectomy, if there is residual OSA due to underlying skeletal discrepancy, the patient may be referred to an orthodontist for appropriate management. Currently the evidence in the literature for prophylactic growth modification in children to prevent OSA is weak. In adults, the gold standard for managing OSA is Positive Airway Pressure (PAP) therapy; however, adherence to this treatment is rather low. The oral appliance (OA) therapy is an alternate for PAP intolerant patients and for mild to moderate OSA patients. The OA therapy has to be administered by a qualified dentist or orthodontist after careful examination of dental and periodontal health as well as any pre-existing joint conditions. The OA therapy could cause OA-associated malocclusion and patients have to be made aware of prior to initiating treatment. In patients with severe OSA, surgical maxilla-mandibular advancement (MMA) is highly effective.

Constitutive model for shape memory polymer and its thermodynamic responses in finite element analysis.

BACKGROUND: As a new intelligent polymer material, shape memory polymer (SMP) was a potential orthodontic appliance material. OBJECTIVE: This study aimed to investigate the thermodynamic responses of SMP under different loads via finite element analysis (FEA). METHODS: FEA specimens with a specification of 0.1 × 0.1 × 1 mm were designed. One end of the specimen was fixed, and the other was subjected to displacement load. Different loading, cooling, and heating rates were separately exerted on the specimen in its shape recovery process and used to observe the responses of the SMP constitutive model. Furthermore, specimens with various tensile elongation and sectional areas were simulated and used to elucidate their effect on shape recovering force. RESULTS: The specimens obtained a similar stress of 0.5, 0.44, and 1.07 Mpa for different loading, cooling, and heating rates after a long time. The shape recovering force of specimen increased from 0.0102 to 0.0315 N when the elongation improved from 10% to 40% and to 0.0408 N when the sectional areas were expanded to 0.2 × 0.2 mm. CONCLUSION: The stiffness of SMP was small at a high temperature but large at a low temperature. The effects of the loading, cooling, and heating rates on SMP can be eliminated after a long time. Furthermore, it was possible to increase the recovering force by increasing the elongation or expanding the sectional area of the specimen. The force was quadratically dependent on the elongation ratio.

A novel acrylic orthodontic device for treatment of linguoverted mandibular canine teeth in small dogs.

Linguoverted mandibular canine teeth (LMC) is a common malocclusion in dogs. Several inclined bite-plane techniques using acrylic resin have been introduced to correct LMC in dogs. Although these techniques have suggested modifications to overcome shortcomings, there are still limitations; e.g., high technical sensitivity, as the viscous acrylic resin must still be fabricated in the oral cavity. The authors developed a novel method for small-breed dogs that uses a doughy acrylic resin form to achieve an easy intraoral design and extraoral fabrication. Eight small-breed dogs were presented to evaluate and treat malocclusion causing palatal trauma. First, a Class-1 malocclusion with linguoversion of the mandibular canine teeth (6 dogs with unilateral LMC and 2 dogs with bilateral) was diagnosed based on oral examination. Dogs were treated with the new method using a doughy acrylic resin form for 6 to 7 wk and had posttreatment follow-up 1 y after the procedure. All treated canine teeth were in correct positions 1 y after the appliances were removed. Key clinical message: The authors believe that the new method using a doughy acrylic resin form could be a good alternative for veterinarians to use when treating LMC.

Un nouveau dispositif orthodontique en acrylique pour le traitement des canines mandibulaires linguoverties chez les petits chiens. Les canines mandibulaires linguoverties (LMC) sont une malocclusion courante chez le chien. Plusieurs techniques de plan de morsure incliné utilisant de la résine acrylique ont été introduites pour corriger la LMC chez le chien. Bien que ces techniques aient suggéré des modifications pour surmonter les lacunes, elles présentent encore des limites; par exemple, une sensibilité technique élevée, car la résine acrylique visqueuse doit encore être fabriquée dans la cavité buccale. Les auteurs ont développé une nouvelle méthode pour les chiens de petite race qui utilise une forme pâteuse de résine acrylique pour obtenir une conception intra-orale et une fabrication extra-orale faciles. Huit chiens de petite race ont été présentés pour évaluer et traiter une malocclusion provoquant un traumatisme palatin. Tout d'abord, une malocclusion de classe 1 avec linguoversion des canines mandibulaires (6 chiens avec LMC unilatérale et 2 chiens avec bilatérale) a été diagnostiquée sur la base d'un examen oral. Les chiens ont été traités avec la nouvelle méthode en utilisant une forme pâteuse de résine acrylique pendant 6 à 7 semaines et ont fait l'objet d'un suivi post-traitement 1 an après la procédure. Toutes les canines traitées étaient dans la bonne position un an après le retrait des appareils.Message clinique clé:Les auteurs estiment que la nouvelle méthode utilisant une forme pâteuse de résine acrylique pourrait être une bonne alternative que les vétérinaires pourraient utiliser lors du traitement du LMC.(Traduit par Dr Serge Messier).

A systematic review of the clinical outcomes for various orthodontic and physiotherapy appliances used for the management of temporomandibular joint ankylosis.

Ankylosis of the temporomandibular joint (TMJ) is associated with restricted mandibular movements, with deviation to the affected side. The management of TMJ ankylosis involves surgery to mitigate the effects of ankylosis, and adjunctive appliance therapy to supplement the results achieved through surgery. Several appliances have been used to help maintain jaw mobility postsurgery, but have been rarely documented in the literature. Our systematic review aimed to examine the clinical outcomes of various appliances for TMJ ankylosis management. A comprehensive electronic search of the literature was performed in July 2022 to identify eligible articles that had tested the use of orthodontic or physiotherapy appliances for the management of TMJ ankylosis. In total, 13 publications were included in the narrative synthesis. Both generic and custom-made appliances were used, with overall findings suggesting that using these appliances improved mouth opening and reduced chances of re-ankylosis. In this review no universally accepted appliance was found to be utilized, and the criteria used for appliance selection were unclear. The field of research in developing appliances for the treatment of TMJ ankylosis is open to advancement, and this review will help guide future research in this area.

Assessment of the quality and accuracy of information contained within the websites of marketed orthodontic products: a cross-sectional investigation.

OBJECTIVES: To assess the quality and accuracy of information contained within the websites of providers of marketed orthodontic products. MATERIALS AND METHODS: Twenty-one websites of orthodontic appliance and adjunct (product) providers were identified. The website content was assessed via two validated quality-of-information instruments (DISCERN and the Journal of the American Medical Association [JAMA] benchmarks) and an accuracy-of-information instrument. Website content was qualitatively analyzed for themes and subthemes. RESULTS: More than half (n = 11; 52.3%) of the assessed websites contained clinician testimonials. The mean (SD) DISCERN score was 33.14 (5.44). No website recorded the minimum of three JAMA benchmarks required to indicate reliability. The most common content themes related to quality-of-life impact and treatment duration. Just 8% of the statements within the websites were objectively true. The Pearson correlation coefficient indicated that the DISCERN scores were correlated with the accuracy-of-information scores (r = .83; P < .001). CONCLUSIONS: The quality and accuracy of information contained within the websites of the providers of marketed orthodontic products was poor. The combined use of DISCERN and the accuracy-of-information instrument may help overcome the shortcomings of each. Clinicians should check the accuracy of information on orthodontic product provider websites before adding links to those websites on their own sites.

Percentage of patients shifting to another treatment modality: An experience-guided decision.

OBJECTIVE: This study aimed to assess the frequency with which orthodontic patients decided to shift to another type of orthodontic appliance, among conventional metal brackets, ceramic brackets, lingual brackets and clear aligner, based on their personal experiences of pain, ulcers, bad breath, hygiene issues and social difficulties. MATERIAL AND METHODS: This study comprises of patients seeking orthodontic treatment. The sample (n = 500; age group = 19-25 years) was divided equally into four groups based on the treatment modality: conventional metal brackets, ceramic brackets, lingual brackets and clear aligner. Patients rated the questionnaire using a visual analogue scale, to assess variables (such as pain, ulcer etc) that impact various treatment modalities. Subsequently, patients from all groups provided feedback regarding their treatment experiences, and expressed their preference for an alternative modality. Intergroup comparison among the four groups was done using one-way analysis of variance with Tukey's HSD post-hoc test (p ≤ 0.05). RESULTS: Patients who received lingual brackets reported higher levels of pain and ulceration, as compared to those who received clear aligners. All four groups showed statistically significant differences for ulcers during treatment (p ≤ 0.05). Of the 125 patients who received conventional metal brackets, 28% expressed a preference for clear aligner therapy, while 20% preferred ceramic brackets. In the lingual group, 56% of 125 patients preferred clear aligner therapy, and 8% preferred ceramic brackets to complete their treatment. In the ceramic group, 83% did not want to switch, whereas 17% desired to switch to clear aligner, while in aligner group no patient desired to switch. CONCLUSIONS: A higher percentage of patients from lingual brackets group chose to shift to clear aligners, followed by conventional metal brackets group and by ceramic brackets group, in this descending order. The clear aligner group demonstrated fewer issues than the other treatment modalities.

Digital setup accuracy for moderate crowding correction with fixed orthodontic appliances: a prospective study.

OBJECTIVES: To evaluate the accuracy of a semi-automatic 3D digital setup process in predicting the orthodontic treatment outcome achieved by labial fixed appliances. SUBJECTS AND METHODS: Twenty-five adult patients (18 to 24 years old) with class I malocclusion and moderate crowding were prospectively enrolled and received treatment on both jaws through the straight-wire technique. Prior to treatment commencement, a semi-automatic digital setup simulating the predicted treatment outcome was performed for each patient through Orthoanalyzer software (3Shape®, Copenhagen, Denmark) to obtain the prediction model. This was compared to the final outcome model through 3D superimposition methods. Metric variables and inspection of color-coded distance maps were used to detect how accurately the digital setup predicts the actual treatment outcome. RESULTS: The mean absolute distances (MAD) between the superimposed dental arches of the predicted and the final models were: 0.77 ± 0.13 mm following superimposition on the palate, 0.52 ± 0.06 mm following superimposition on the maxillary dental arch, and 0.55 ± 0.15 mm following superimposition on the mandibular dental arch. The MAD at the palatal reference area was 0.09 ± 0.04 mm. Visualization of color-coded distance maps indicated that the digital setup accurately predicted the final teeth position in a few cases. Almost half of the cases had posteriorly wider upper and lower dental arches and palatally/lingually positioned or inclined anterior teeth, whereas the rest still showed errors within 2-3 mm, distributed over the entire dental arches with no distinct pattern. CONCLUSIONS: The accuracy of semi-automatic prediction of the labial fixed appliance treatment outcome in Class I cases with moderate crowding is not yet sufficient. While average measures showed deviations less than 1 mm, examination of individual color-coded distance maps revealed significant disparities between the simulated and the actual results.

Systematic review on effects of experimental orthodontic tooth displacement on brain activation assessed by fMRI.

BACKGROUND: Orthodontic treatment is often accompanied by discomfort and pain in patients, which are believed to be a result of orthodontic tooth displacement caused by the mechanical forces exerted by the orthodontic appliances on the periodontal tissues. These lead to change blood oxygen level dependent response in related brain regions. OBJECTIVE: This systematic review aims to assess the impact of experimental orthodontic tooth displacement on alterations in central nervous system activation assessed by tasked based and resting state fMRI. MATERIALS AND METHODS: A literature search was conducted using online databases, following PRISMA guidelines and the PICO framework. Selected studies utilized magnetic resonance imaging to examine the brain activity changes in healthy participants after the insertion of orthodontic appliances. RESULTS: The initial database screening resulted in 791 studies. Of these, 234 were duplicates and 547 were deemed irrelevant considering the inclusion and exclusion criteria. Of the ten remaining potential relevant studies, two were excluded during full-text screening. Eight prospective articles were eligible for further analysis. The included studies provided evidence of the intricate interplay between orthodontic treatment, pain perception, and brain function. All of the participants in the included studies employed orthodontic separators in short-term experiments to induce tooth displacement during the early stage of orthodontic treatment. Alterations in brain activation were observed in brain regions, functional connectivity and brain networks, predominantly affecting regions implicated in nociception (thalamus, insula), emotion (insula, frontal areas), and cognition (frontal areas, cerebellum, default mode network). CONCLUSIONS: The results suggest that orthodontic treatment influences beyond the pain matrix and affects other brain regions including the limbic system. Furthermore, understanding the orthodontically induced brain activation can aid in development of targeted pain management strategies that do not adversely affect orthodontic tooth movement. Due to the moderate to serious risk of bias and the heterogeneity among the included studies, further clinical trials on this subject are recommended.

Nanotechnology in Orthodontics: Unveiling Pain Mechanisms, Innovations, and Future Prospects of Nanomaterials in Drug Delivery.

Orthodontic pain is characterized by sensations of tingling, tooth discomfort, and intolerance. According to the oral health report, over forty percent of children and adolescents have undergone orthodontic treatment. The efficacy of orthodontic treatment involving braces can be compromised by the diverse levels of discomfort and suffering experienced by patients, leading to suboptimal treatment outcomes and reduced patient adherence. Nanotechnology has entered all areas of science and technology. This review provides an overview of nanoscience, its application in orthodontics, the underlying processes of orthodontic pain, effective treatment options, and a summary of recent research in Nano-dentistry. The uses of this technology in healthcare span a wide range, including enhanced diagnostics, biosensors, and targeted drug delivery. The reason for this is that nanomaterials possess distinct qualities that depend on their size, which can greatly enhance human well-being and contribute to better health when effectively utilized. The field of dentistry has also experienced significant advancements, particularly in the past decade, especially in the utilization of nanomaterials and technology. Over time, there has been an increase in the availability of dental nanomaterials, and a diverse array of these materials have been extensively studied for both commercial and therapeutic purposes.

Validation of a double-semicircular notched configuration for mechanical testing of orthodontic thermoplastic aligner materials.

The potential of using specimens with a double-semicircular-notched configuration for performing tensile tests of orthodontic thermoplastic aligner materials was explored. Unnotched and double-semicircular-notched specimens were loaded in tension using a universal testing machine to determine their tensile strength, while finite element analysis (FEA) and digital image correlation (DIC) were used to estimate stress and strain, respectively. The shape did affect the tensile strength, demonstrating the importance of unifying the form of the specimen. During the elastic phase under tension, double-semicircular-notched specimens showed similar behavior to unnotched specimens. However, great variance was observed in the strain patterns of the unnotched specimens, which exhibited greater chance of end-failure, while the strain patterns of the double-semicircular-notched specimens showed uniformity. Considerable agreement between the theoretical (FEA) and practical models (DIC) further confirmed the validity of the double-semicircular-notched models.

Orthodontic treatment for prominent lower front teeth (Class III malocclusion) in children.

BACKGROUND: Prominent lower front teeth (Class III malocclusion) may be due to jaw or tooth position or both. The upper jaw (maxilla) can be too far back or the lower jaw (mandible) too far forward; the upper front teeth (incisors) may be tipped back or the lower front teeth tipped forwards. Orthodontic treatment uses different types of braces (appliances) fitted inside or outside the mouth (or both) and fixed to the teeth. A facemask is the most commonly reported non-surgical intervention used to correct Class III malocclusion. The facemask rests on the forehead and chin, and is connected to the upper teeth via an expansion appliance (known as 'rapid maxillary expansion' (RME)). Using elastic bands placed by the wearer, a force is applied to the top teeth and jaw to pull them forwards and downward. Some orthodontic interventions involve a surgical component; these go through the gum into the bone (e.g. miniplates). In severe cases, or if orthodontic treatment is unsuccessful, people may need jaw (orthognathic) surgery as adults. This review updates one published in 2013. OBJECTIVES: To assess the effects of orthodontic treatment for prominent lower front teeth in children and adolescents. SEARCH METHODS: An information specialist searched four bibliographic databases and two trial registries up to 16 January 2023. Review authors screened reference lists. SELECTION CRITERIA: We looked for randomised controlled trials (RCTs) involving children and adolescents (16 years of age or under) randomised to receive orthodontic treatment to correct prominent lower front teeth (Class III malocclusion), or no (or delayed) treatment. DATA COLLECTION AND ANALYSIS: We used standard methodological procedures expected by Cochrane. Our primary outcome was overjet (i.e. prominence of the lower front teeth); our secondary outcomes included ANB (A point, nasion, B point) angle (which measures the relative position of the maxilla to the mandible). MAIN RESULTS: We identified 29 RCTs that randomised 1169 children (1102 analysed). The children were five to 13 years old at the start of treatment. Most studies measured outcomes directly after treatment; only one study provided long-term follow-up. All studies were at high risk of bias as participant and personnel blinding was not possible. Non-surgical orthodontic treatment versus untreated control We found moderate-certainty evidence that non-surgical orthodontic treatments provided a substantial improvement in overjet (mean difference (MD) 5.03 mm, 95% confidence interval (CI) 3.81 to 6.25; 4 studies, 184 participants) and ANB (MD 3.05°, 95% CI 2.40 to 3.71; 8 studies, 345 participants), compared to an untreated control group, when measured immediately after treatment. There was high heterogeneity in the analyses, but the effects were consistently in favour of the orthodontic treatment groups rather than the untreated control groups (studies tested facemask (with or without RME), chin cup, orthodontic removable traction appliance, tandem traction bow appliance, reverse Twin Block with lip pads and RME, Reverse Forsus and mandibular headgear). Longer-term outcomes were measured in only one study, which evaluated facemask. It presented low-certainty evidence that improvements in overjet and ANB were smaller at 3-year follow-up than just after treatment (overjet MD 2.5 mm, 95% CI 1.21 to 3.79; ANB MD 1.4°, 95% CI 0.43 to 2.37; 63 participants), and were not found at 6-year follow-up (overjet MD 1.30 mm, 95% CI -0.16 to 2.76; ANB MD 0.7°, 95% CI -0.74 to 2.14; 65 participants). In the same study, at the 6-year follow-up, clinicians made an assessment of whether surgical correction of participants' jaw position was likely to be needed in the future. A perceived need for surgical correction was observed more often in participants who had not received facemask treatment (odds ratio (OR) 3.34, 95% CI 1.21 to 9.24; 65 participants; low-certainty evidence). Surgical orthodontic treatment versus untreated control One study of 30 participants evaluated surgical miniplates, with facemask or Class III elastics, against no treatment, and found a substantial improvement in overjet (MD 7.96 mm, 95% CI 6.99 to 8.40) and ANB (MD 5.20°, 95% CI 4.48 to 5.92; 30 participants). However, the evidence was of low certainty, and there was no follow-up beyond the end of treatment. Facemask versus another non-surgical orthodontic treatment Eight studies compared facemask or modified facemask (with or without RME) to another non-surgical orthodontic treatment. Meta-analysis did not suggest that other treatments were superior; however, there was high heterogeneity, with mixed, uncertain findings (very low-certainty evidence). Facemask versus surgically-anchored appliance There may be no advantage of adding surgical anchorage to facemasks for ANB (MD -0.35, 95% CI -0.78 to 0.07; 4 studies, 143 participants; low-certainty evidence). The evidence for overjet was of very low certainty (MD -0.40 mm, 95% CI -1.30 to 0.50; 1 study, 43 participants). Facemask variations Adding RME to facemask treatment may have no additional benefit for ANB (MD -0.15°, 95% CI -0.94 to 0.64; 2 studies, 60 participants; low-certainty evidence). The evidence for overjet was of low certainty (MD 1.86 mm, 95% CI 0.39 to 3.33; 1 study, 31 participants). There may be no benefit in terms of effect on ANB of alternating rapid maxillary expansion and constriction compared to using expansion alone (MD -0.46°, 95% CI -1.03 to 0.10; 4 studies, 131 participants; low-certainty evidence). AUTHORS' CONCLUSIONS: Moderate-certainty evidence showed that non-surgical orthodontic treatments (which included facemask, reverse Twin Block, orthodontic removable traction appliance, chin cup, tandem traction bow appliance and mandibular headgear) improved the bite and jaw relationship immediately post-treatment. Low-certainty evidence showed surgical orthodontic treatments were also effective. One study measured longer-term outcomes and found that the benefit from facemask was reduced three years after treatment, and appeared to be lost by six years. However, participants receiving facemask treatment were judged by clinicians to be less likely to need jaw surgery in adulthood. We have low confidence in these findings and more studies are required to reach reliable conclusions. Orthodontic treatment for Class III malocclusion can be invasive, expensive and time-consuming, so future trials should include measurement of adverse effects and patient satisfaction, and should last long enough to evaluate whether orthodontic treatment in childhood avoids the need for jaw surgery in adulthood.