Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 9 de 9
Filtrar
Más filtros










Base de datos
Intervalo de año de publicación
1.
ACS Omega ; 9(25): 27428-27437, 2024 Jun 25.
Artículo en Inglés | MEDLINE | ID: mdl-38947794

RESUMEN

Recently, obtaining collagen films using a cross-linking technique has been a successful strategy. The current investigation used six cross-linker extracts (CE) from six different pomegranate varieties' byproducts to make and characterize collagen-tannin films using acid-soluble collagen (SC). The polymeric film has a yellow hue after CE incorporation. Fourier transform infrared spectroscopy assessed the impact of CE and its successful interaction within the matrix. The shifts verify different interactions between extracts and collagen functional groups, where they likely form new hydrogen bonds, retaining their helix structure without damaging the matrix. Scanning electron microscopy was used to analyze the morphology and fiber size. The average diameter of the fibers was found to be about 3.64 µm. Thermal behaviors (denaturation and degradation) were investigated by thermogravimetric analysis. The weight losses of cross-linked films increased by around 20% compared to non-cross-linked ones. This phenomenon was explained by the absence of telopeptide sections in the collagen helical structure, typically reinforced by lysine and hydroxylysine covalent linkages. Nanoscaled observations were also accomplished using transmission electron microscopy (TEM) on SC and SC-CE. The TEM analysis confirmed the CE polymerization degree effect on the cross-linking density via the overlap sequences, ranging up to 32.38 ± 2.37 nm on the fibril. The prepared biodegradable collagen-tannin film showed higher cross-linking density, which is expected to improve the biomaterial applications of collagen films while exploiting the underrated pomegranate byproducts.

2.
Curr Microbiol ; 81(6): 151, 2024 Apr 22.
Artículo en Inglés | MEDLINE | ID: mdl-38647541

RESUMEN

Hospital-acquired infections involving carbapenem-resistant Acinetobacter baumannii (A. baumannii) and extended spectrum beta-lactamase (ESBL)-producing Enterobacteriaceae pose significant challenges in the intensive care units. The lack of novel antimicrobial drugs amplifies the urgency to explore innovative management strategies. Nanotechnology, with its ability to generate nanoparticles possessing specific properties beneficial in drug delivery and nanomedicine, stands as a pivotal research domain. The objective of this study was to synthesize, for the first time, biologically silver nanoparticles (Ag-NPs) from Lavandula mairei Humbert (L. mairei) plant. The biosynthesized Ag-NPs were characterized by UV-visible spectral analysis, X-Ray diffraction Analysis, Fourier transform infrared spectroscopy analysis, scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy. Subsequently, the antibacterial and antioxidant activities of Ag-NPs were assessed using the micro-dilution method, DPPH test and FRAP assay, respectively. The green-synthesized Ag-NPs exhibited high antibacterial activity against ESBL-producing multidrug-resistant (MDR) strains and against carbapenem-resistant and non-carbapenem-resistant strains of A. baumannii, as well as a very interesting antioxidant activity. The present study suggests that these results hold very promising for the potential application of biologically synthesized Ag-NPs from L. mairei (Ag-LM-NPs) in the invention of novel antibacterial and antioxidant agents.


Asunto(s)
Acinetobacter baumannii , Antibacterianos , Antioxidantes , Nanopartículas del Metal , Pruebas de Sensibilidad Microbiana , Plata , Plata/química , Plata/farmacología , Plata/metabolismo , Antioxidantes/farmacología , Antioxidantes/química , Antibacterianos/farmacología , Antibacterianos/química , Nanopartículas del Metal/química , Acinetobacter baumannii/efectos de los fármacos , Extractos Vegetales/química , Extractos Vegetales/farmacología , Espectroscopía Infrarroja por Transformada de Fourier
3.
RSC Adv ; 12(7): 4175-4186, 2022 Jan 28.
Artículo en Inglés | MEDLINE | ID: mdl-35425412

RESUMEN

An environmental approach for leather manufacturing is primordial to provide a global strategy towards more sustainable biomaterials and greener tanning processing methods. The ability of collagen as a principal component of skin to combine natural phenolic compounds, especially vegetable tannins, has been proven to be eco-friendly and manageable, while making good improvement to leather properties in the tanning process. In this study, we have used pomegranate phenolic compounds and insoluble collagen as a model system to examine the effects of tanning steps on the conformation of collagen. In detail, efficient modified extraction of pure insoluble collagen (IC) was presented. The IC was successfully identified using XRD, FTIR, SEM-EDS and TGA-DSC to verify the triple helix structure, morphology and thermal properties. As a result, the as-extracted collagen exhibits a high purity, preserving the triple helix collagen structure. Besides, the IC was modified using extracted pomegranate phenolic compounds, resulting in Crosslinked Insoluble Collagen (CIC). Characterization techniques were also performed to confirm the crosslinking process. Indeed, by comparing the FTIR vibrational spectra of IC and CIC, slight shifts of amide groups were observed, indicating the presence of inter and intramolecular interaction between IC functional groups and pomegranate phenolic compounds. Moreover, the morphology of CIC was changed. XRD analysis confirms collagen conformational integrity. Finally, thermal properties were improved. The temperature at 50% weight loss (T°50) increases from 344.54 °C to 375.53 °C. CIC multifunctionality allowed utilizing pomegranate phenolic compound extracts as a tanning agent in leather processing.

4.
J Mol Model ; 28(2): 37, 2022 Jan 15.
Artículo en Inglés | MEDLINE | ID: mdl-35034209

RESUMEN

Herein, bio-based alginates (Alg) containing metallic beads (Ce and Cu) were synthesized via an alginate cross-linking method, and their properties were studied using experimental techniques combined with theoretical simulations. Materials were characterized through Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and scanning electron microscope (SEM) images, to determine the cross-linking structural features, thermal stability, and surface morphology of alginates. Besides, density functional theory (DFT) methods were employed to calculate global reactivity parameters such as HOMO-LUMO gap energies (ΔEH-L), electronegativity (χ), hardness (η), and electrophilic and nucleophilic indicators, using both gas and aqueous media for the study of the complexation process. Among other features, characterization of the thermal properties showed that Alg@Ce and Alg@Cu alginate beads behave differently as a function of the temperature. This behavior was also predicted by the conformation energy differences between Alg@Ce and Alg@Cu, which were found out theoretically and explained with the combined study of the vibrational modes between the carboxylate group with either Ce or Cu. Overall, the reactivity of the Alg@Ce alginate bead was higher than that of the Alg@Cu counterpart, results could be used as a cornerstone to employed the materials here studied in a wide range of applications.


Asunto(s)
Alginatos/química , Materiales Biocompatibles/química , Cerio/química , Fenómenos Químicos , Cobre/química , Modelos Teóricos , Algoritmos , Materiales Biocompatibles/síntesis química , Técnicas de Química Sintética , Tecnología Química Verde , Modelos Moleculares , Análisis Espectral
5.
Sci Rep ; 11(1): 3771, 2021 Feb 12.
Artículo en Inglés | MEDLINE | ID: mdl-33580143

RESUMEN

Five novel pyrazolylnucleosides have been evaluated theoretically for their corrosion inhibition efficiency on the Cu(111) surface in acidic media. DFT calculations were carried out to exhibit the intrinsic properties such as lowest unoccupied (ELUMO) and highest occupied (EHOMO) molecular orbital energies, as well as energy gap (∆E), chemical hardness (η), chemical softness (σ), electronegativity (χ), electrophilicity (ω) and nucleophilicity (ε). The theoretical FT-IR spectra were recorded to indicate the presence of the specific bonds in the studied molecules. The surface interactions between the inhibitor molecules and the metal surface were investigated using molecular dynamics simulations and Monte Carlo (MC) simulations. As a result, we have found that the inhibitor pyrazolylnucleosides 5a-e have strong interactions with Cu(111) surface, and therefore have excellent predictive inhibition power against copper corrosion.

6.
ACS Omega ; 5(35): 22192-22207, 2020 Sep 08.
Artículo en Inglés | MEDLINE | ID: mdl-32923777

RESUMEN

Biosorption using natural waste has emerged as a potential and promising strategy for removal of toxic dyes from wastewaters in comparison to conventional ones. Herein, the Codium decorticatum alga (CDA) was biologically identified and used as a biosorbent for anionic and cationic dyes from aqueous solutions. SEM analysis showed a rough surface with an irregular edge and shape while hydroxyl, amine, sulfur and carboxyl functional groups were identified using FTIR analysis. TGA/DTG confirmed the stability of CDA and the adsorption process. Batch studies were conducted to investigate the effect of operational factors such as initial pH, biosorbent dosage, temperature, initial concentration, and solid/liquid contact time on the biosorption of crystal violet (CV) and Congo red (CR) dyes. For both CV and CR dyes, the biosorption kinetics was accurately described by the pseudo-second-order model and the Langmuir isotherm was found to be best fitted for equilibrium data. Maximum uptake capacities have attained up to 278.46 mg/g for CV and 191.01 mg/g for CR. The CV and CR dye biosorption mechanism was ultimately manifested through the electrostatic interactions. The regeneration study showed that the CDA presents excellent reuse performance up to four consecutive cycles. The process optimization was performed using the response surface methodology based on Box-Behnken design (RSM-BDD). Accordingly, the optimum predicted removal efficiencies using RSM-BBD for CV and CR were obtained, respectively, at 96.9 and 89.8% using a CDA dose of 1.5 g/L, dye concentration of 20 mg/L, pH of 10 for CV, and pH of 4 for CR. Overall, CDA behaves as an efficient, recyclable, cheap, and eco-friendly adsorbent for cleaning-up of dyed effluents.

7.
Int J Microbiol ; 2020: 4313908, 2020.
Artículo en Inglés | MEDLINE | ID: mdl-32655644

RESUMEN

The biofilm formation on the surfaces which are in direct contact with food products might lead to their contamination and, consequently, present serious health problems for the consumers. The goals of the present work were to study P. aeruginosa biofilm formation on two granites and to investigate the efficiency of sodium hypochlorite (NaCLO) against the same biofilm formed on these substrata using the plate count method (PCM) and epifluorescence microscopy (EP). More biofilm cells adhered to Rosa Porrino than Gris Pinhel, and the PCM method indicated that NaCLO was efficient against the biofilm installed on the Gris Pinhel at the concentration of 1.5% after 15 min of treatment, while it was not efficient against the one installed on the Rosa Porrino. By contrast, the EP showed that the biofilm persists on two granites after NaCLO treatment, at different concentrations and contact times. In addition, the surface properties of granites such as mineral composition, roughness, and physicochemical properties were determined by X-ray diffraction (XRD), scanning electron microscopy coupled with electron diffraction spectroscopy coupled with energy-dispersive X-ray spectroscopy (SEM-EDS), Fourier transform infrared (FTIR), atomic force microscopy (AFM), and contact angle measurement (CAM), respectively. The results revealed that Gris Pinhel is hydrophilic with a high roughness value and Rosa Porrino is hydrophobic with low roughness, while both of them contain the quartz, feldspar, and mica as the main dominant compositions.

8.
Environ Sci Pollut Res Int ; 26(19): 19615-19631, 2019 Jul.
Artículo en Inglés | MEDLINE | ID: mdl-31079303

RESUMEN

The present research highlights the use of a montmorillonite clay to remove p-nitrophenol (PNP) from aqueous solution. The montmorillonite clay was characterized using powder X-ray diffraction, Fourier-transformed infrared spectroscopy, scanning electron microscopy, X-ray fluorescence, Brunauer-Emmett-Teller analyses, and zero point charge in order to establish the adsorption behavior-properties relationship. The physiochemical parameters like pH, initial PNP concentration, and adsorbent dose as well as their binary interaction effects on the PNP adsorption yield were statistically optimized using response surface methodology. As a result, 99.5% removal of PNP was obtained under the optimal conditions of pH 2, adsorbent dose of 2 g/l, and PNP concentration of 20 mg/l. The interaction between adsorbent dose and initial concentration was the most influencing interaction on the PNP removal efficiency. The mass transfer of PNP at the solution/adsorbent interface was described using pseudo-first-order and intraparticle diffusion. Langmuir isotherm well fitted the experimental equilibrium data with a satisfactory maximum adsorption capacity of 122.09 mg/g. The PNP adsorption process was thermodynamically spontaneous and endothermic. The regeneration study showed that the montmorillonite clay exhibited an excellent recycling capability. Overall, the montmorillonite clay is very attractive as an efficient, low-cost, eco-friendly, and recyclable adsorbent for the remediation of hazardous phenolic compounds in industrial effluents.


Asunto(s)
Bentonita/química , Arcilla/química , Nitrofenoles/análisis , Contaminantes Químicos del Agua/análisis , Purificación del Agua/métodos , Adsorción , Difusión , Concentración de Iones de Hidrógeno , Cinética , Propiedades de Superficie , Termodinámica
9.
RSC Adv ; 8(37): 20737-20747, 2018 Jun 05.
Artículo en Inglés | MEDLINE | ID: mdl-35542378

RESUMEN

In the present study, we investigate a simple and effective synthetic protocol to produce zinc oxide foams by a facile solution-based method using alginate gelation. The influences of the zinc concentration and the drying process on the structural, textural and morphological properties of the synthesized ZnO nanomaterial were studied and discussed. The components of these nanomaterials were characterized by several techniques to demonstrate the effectiveness of the adopted synthetic route in controlling the growth of the ZnO nanoparticles. XRD analysis revealed that the as-prepared ZnO nanomaterial crystallizes in the hexagonal wurtzite structure. The room temperature photoluminescence (PL) spectra of ZnO show ultra-violet (UV) and visible emissions. SEM analysis revealed the porous texture of the prepared zinc oxide. TEM analysis confirmed the nano dimensions of the synthesized zinc oxide nanoparticles. A comparative study of conventional air drying versus supercritical drying was conducted to determine the influence of each mode of drying on the structural, textural and morphological as well as optical properties of the synthesized ZnO nanoparticles.

SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA
...