Application of conventional and emerging low-cost adsorbents as sustainable materials for removal of contaminants from water.

The impact of water pollution has led to the search for cost-effective and environmentally friendly treatment processes to alleviate the associated environmental hazards. Adsorption is identified as an advanced treatment technology that offers simplicity and cheap alternatives to water treatment technologies when low-cost adsorbents such as industrial by-products, waste, and agricultural waste are utilized. The utilization of these materials as low-cost adsorbents for the treatment of drinking water will bring them some value. Several practices have been done to improve the removal efficiencies of the low-cost adsorbents in order to achieve WHO standards of drinking water quality. The paper highlights some of the synthesis routes employed for the modification of low-cost adsorbents. This updated review provides information on the different applications of low-cost adsorbents in removing pollutants and their adsorption capacities in an attempt to deploy the recent sustainable low-cost adsorbents with high removal efficiencies for water treatment. Future research should focus on the fabrication of hybrid low-cost adsorbents with multifunctional and antimicrobial properties. In addition, life cycle assessment (LCA) should be conducted to reveal the environmental burdens associated with the modification of the low-cost adsorbent to improve their removal efficiencies.

TiO2 ceramic membrane decorated with Fe3O4-Ag composite nanoparticles for produced water treatment.

This study focused on the surface modification of commercial TiO2 membranes with Fe3O4 decorated silver (Ag) nanoparticles (Fe3O4-Ag) via chemical attachment. Firstly, the Ag concentration on Fe3O4 was optimized, and different composites were prepared and characterized. Secondly, the optimal composite was used to prepare novel TiO2/Fe3O4-Ag ceramic membranes via surface coating through tetraethyl orthosilicate (TEOS) crosslinking. The membranes were characterized using SEM, EDX, FTIR, XRD, and contact angle. Biofouling resistance of the membranes was investigated using the Coomassie Blue dye method. The coated membranes were tested for water flux, chemical oxygen demand (COD) rejection, and biofouling resistance. Results showed that all coated membranes exhibited higher water flux. For example, the membrane with a 1.25 wt% Fe3O4-Ag coating showed the highest filtration flux of 1445 L/m2h (LMH) compared to the pristine membrane (379 LMH) without compromising the COD rejection. The resistance of the membrane to biofouling increased with the increase of Fe3O4-Ag nanoparticle concentration. The obtained results demonstrate the great potential of TiO2/Fe3O4-Ag ceramic membranes for the treatment of produced water.

Recent developments in porous ceramic membranes for wastewater treatment and desalination: A review.

The development of membrane technology has proved vital in providing a sustainable and affordable supply of clean water to address the ever-increasing demand. Though liquid separation applications have been still dominated by polymeric membranes, porous ceramic membranes have gained a commercial foothold in microfiltration (MF) and ultrafiltration (UF) applications due to their hydrophilic nature, lower fouling, ease of cleaning, reliable performance, robust performance with harsh feeds, relative insensitivity to temperature and pH, and stable long-term flux. The enrichment of research and development on porous ceramic membranes extends its focus into advanced membrane separation technologies. The latest emerging nanofiltration (NF) and membrane distillation (MD) applications have witnessed special interests in constructing porous membrane with hydrophilic/functional/hydrophobic properties. However, NF and MD are relatively new, and many shortcomings must be addressed to compete with their polymeric counterparts. For the last three years (2018-2020), state-of-the-art literature on porous ceramic membranes has been collected and critically reviewed. This review highlights the efficiency (permeability, selectivity, and antifouling) of hydrophilic porous ceramic membranes in a wide variety of wastewater treatment applications and hydrophobic porous ceramic membranes in membrane distillation-based desalination applications. A significant focus on pores characteristics, pore sieving phenomenon, nano functionalization, and synergic effect on fouling, the hydrophilic porous ceramic membrane has been discussed. In another part of this review, the role of surface hydrophobicity, water contact angle, liquid entry pressure (LEP), thermal properties, surface micro-roughness, etc., has been discussed for different types of hydrophobic porous ceramic membranes -(a) metal-based, (b) silica-based, (c) other ceramics. Also, this review highlights the potential benefits, drawbacks, and limitations of the porous membrane in applications. Moreover, the prospects are emphasized to overcome the challenges in the field.