RESUMEN
Optimizing a sustained-release drug delivery system for the treatment of cystic fibrosis (CF) is crucial for decreasing the dosing frequency and improving patients' compliance with the treatment regimen. In the current work, we developed an injectable poly(D,L-lactide-co-glycolide) (PLGA) microparticle formulation loaded with ivacaftor, a cystic fibrosis transmembrane conductance regulator (CFTR) potentiator that increases the open probability of the CFTR anion channel, using a single emulsion solvent evaporation technique. We aimed to study the effect of different parameters on the characteristics of the prepared formulations to select an optimized microparticle formulation to be used in an in vivo pharmacokinetic study in mice. First, a suite of ivacaftor-loaded microparticles were prepared using different formulation parameters in order to study the effect of varying these parameters on microparticle size, morphology, drug loading, encapsulation efficiency, and in vitro release profiles. Prepared microparticles were spherical with diameters ranging from 1.91-6.93 µm, percent drug loading (% DL) of 3.91-10.3%, percent encapsulation efficiencies (% EE) of 26.6-100%, and an overall slow cumulative release profile. We selected the formulation that demonstrated optimal combined % DL and % EE values (8.25 and 90.7%, respectively) for further studies. These microparticles had an average particle size of 6.83 µm and a slow tri-phasic in vitro release profile (up to 6 weeks). In vivo pharmacokinetic studies in mice showed that the subcutaneously injected microparticles resulted in steady plasma levels of ivacaftor over a period of 28 days, and a 6-fold increase in AUC 0 - t (71.6 µg/mL*h) compared to the intravenously injected soluble ivacaftor (12.3 µg/mL*h). Our results suggest that this novel ivacaftor-loaded microparticle formulation could potentially eliminate the need for the frequent daily administration of ivacaftor to people with CF thus improving their compliance and ensuring successful treatment outcomes.
Asunto(s)
Fibrosis Quística , Humanos , Ratones , Animales , Fibrosis Quística/tratamiento farmacológico , Regulador de Conductancia de Transmembrana de Fibrosis Quística , Dioxanos , Tamaño de la PartículaRESUMEN
Gene therapeutic applications combined with bio- and nano-materials have been used to address current shortcomings in bone tissue engineering due to their feasibility, safety and potential capability for clinical translation. Delivery of non-viral vectors can be altered using gene-activated matrices to improve their efficacy to repair bone defects.Ex-situandin-situdelivery strategies are the most used methods for bone therapy, which have never been directly compared for their potency to repair critical-sized bone defects. In this regard, we first time explore the delivery of polyethylenimine (PEI) complexed plasmid DNA encoding bone morphogenetic protein-2 (PEI-pBMP-2) using the two delivery strategies,ex-situandin-situdelivery. To realize these gene delivery strategies, we employed intraoperative bioprinting (IOB), enabling us to 3D bioprint bone tissue constructs directly into defect sites in a surgical setting. Here, we demonstrated IOB of an osteogenic bioink loaded with PEI-pBMP-2 for thein-situdelivery approach, and PEI-pBMP-2 transfected rat bone marrow mesenchymal stem cells laden bioink for theex-situdelivery approach as alternative delivery strategies. We found thatin-situdelivery of PEI-pBMP-2 significantly improved bone tissue formation compared toex-situdelivery. Despite debates amongst individual advantages and disadvantages ofex-situandin-situdelivery strategies, our results ruled in favor of thein-situdelivery strategy, which could be desirable to use for future clinical applications.
Asunto(s)
Bioimpresión , Polietileneimina , Ratas , Animales , Osteogénesis , Huesos , Ingeniería de TejidosRESUMEN
Intraoperative bioprinting (IOB), which refers to the bioprinting process performed on a live subject in a surgical setting, has made it feasible to directly deliver gene-activated matrices into craniomaxillofacial (CMF) defect sites. In this study, we demonstrated a novel approach to overcome the current limitations of traditionally fabricated non-viral gene delivery systems through direct IOB of bone constructs into defect sites. We used a controlled co-delivery release of growth factors from a gene-activated matrix (an osteogenic bioink loaded with plasmid-DNAs (pDNA)) to promote bone repair. The controlled co-delivery approach was achieved from the combination of platelet-derived growth factor-B encoded plasmid-DNA (pPDGF-B) and chitosan-nanoparticle encapsulating pDNA encoded with bone morphogenetic protein-2 (CS-NPs(pBMP2)), which facilitated a burst release of pPDGF-B in 10 days, and a sustained release of pBMP-2 for 5 weeks in vitro. The controlled co-delivery approach was tested for its potential to repair critical-sized rat calvarial defects. The controlled-released pDNAs from the intraoperatively bioprinted bone constructs resulted in â¼40% bone tissue formation and â¼90% bone coverage area at 6 weeks compared to â¼10% new bone tissue and â¼25% total bone coverage area in empty defects. The delivery of growth factors incorporated within the intraoperatively bioprinted constructs could pose as an effective way to enhance bone regeneration in patients with cranial injuries in the future.
Asunto(s)
Bioimpresión , Proteína Morfogenética Ósea 2 , Animales , Bioimpresión/métodos , Proteína Morfogenética Ósea 2/farmacología , Regeneración Ósea/genética , Huesos , Técnicas de Transferencia de Gen , Humanos , Osteogénesis , RatasRESUMEN
Large bone defects are usually managed by replacing lost bone with non-biological prostheses or with bone grafts that come from the patient or a donor. Bone tissue engineering, as a field, offers the potential to regenerate bone within these large defects without the need for grafts or prosthetics. Such therapies could provide improved long- and short-term outcomes in patients with critical-sized bone defects. Bone tissue engineering has long relied on the administration of growth factors in protein form to stimulate bone regeneration, though clinical applications have shown that using such proteins as therapeutics can lead to concerning off-target effects due to the large amounts required for prolonged therapeutic action. Gene-based therapies offer an alternative to protein-based therapeutics where the genetic material encoding the desired protein is used and thus loading large doses of protein into the scaffolds is avoided. Gene- and RNAi-activated scaffolds are tissue engineering devices loaded with nucleic acids aimed at promoting local tissue repair. A variety of different approaches to formulating gene- and RNAi-activated scaffolds for bone tissue engineering have been explored, and include the activation of scaffolds with plasmid DNA, viruses, RNA transcripts, or interfering RNAs. This review will discuss recent progress in the field of bone tissue engineering, with specific focus on the different approaches employed by researchers to implement gene-activated scaffolds as a means of facilitating bone tissue repair.
Asunto(s)
Regeneración Ósea/fisiología , Ingeniería de Tejidos/métodos , Andamios del Tejido , Animales , Enfermedades Óseas/terapia , Huesos/anomalías , Huesos/metabolismo , Terapia Genética/métodos , Humanos , Interferencia de ARNRESUMEN
Tissue engineering is an interdisciplinary field that aims to combine life sciences and engineering to create therapies that regenerate functional tissue. Early work in tissue engineering mostly used materials as inert scaffolding structures, but research has shown that constructing scaffolds from biologically active materials can help with regeneration by enabling cell-scaffold interactions or release of factors that aid in regeneration. Three-dimensional (3D) printing is a promising technique for the fabrication of structurally intricate and compositionally complex tissue engineering scaffolds. Such scaffolds can be functionalized with techniques developed by nanotechnology research to further enhance their ability to stimulate regeneration and interact with cells. Nanotechnological components, nanoscale textures, and microscale/nanoscale printing can all be incorporated into the manufacture of 3D printed scaffolds. This review discusses recent advancements in the merging of nanotechnology with 3D printed tissue engineering scaffolds, with a focus on applications of nanoscale components, nanoscale texture, and innovative printing techniques and the effects observed in vitro and in vivo.
Asunto(s)
Nanotecnología/métodos , Ingeniería de Tejidos/métodos , Andamios del Tejido/química , Animales , Humanos , Impresión Tridimensional , Regeneración/fisiologíaRESUMEN
Research in bone tissue engineering aims to design materials that are effective at generating bone without causing significant side effects. The osteogenic potential of combining matrices and protein growth factors has been well documented, however, improvements are necessary to achieve optimal therapeutic benefits upon clinical translation. In this article, rat calvarial defects were treated with gene-activated matrices (GAMs). The GAMs used were collagen sponges mineralized with a simulated body fluid (SBF) containing a nonviral gene delivery system. Both in vitro and in vivo studies were performed to determine the optimal mode of gene delivery. After 6 weeks, the defects were extracted to assess bone formation and tissue quality through histological and microcomputed tomography analyses. The optimal GAM consisted of a collagen sponge with polyethylenimine plasmid DNA (PEI-pDNA) complexes embedded in a calcium phosphate coating produced by SBF, which increased total bone formation by 39% compared with 19% for control samples. A follow-up in vivo study was performed to optimize the ratio of growth factors included in the GAM. The optimal ratio for supporting bone formation after 6 weeks of implantation was five parts of pBMP-2 to three parts pFGF-2. These studies demonstrated that collagen matrices biomimetically mineralized and activated with plasmids encoding fibroblast growth factor-2 (FGF-2) and bone morphogenetic protein-2 (BMP-2) can optimally improve bone regeneration outcomes. Impact statement Bone tissue engineering has explored both nonviral gene delivery and the concept of biomimetic mineralization. In this study, we combined these two concepts to further enhance bone regeneration outcomes. We demonstrated that embedding polyethylenimine (PEI)-based gene delivery within a mineral layer formed from simulated body fluid (SBF) immersion can increase bone formation rates. We also demonstrated that the ratio of growth factors utilized for matrix fabrication can impact the amount of bone formed in the defect site. This research highlights a combined approach using SBF and nonviral gene delivery both in vitro and in vivo and prepares the way for future optimization of synthetic gene activated matrices.
Asunto(s)
Proteína Morfogenética Ósea 2 , Ingeniería de Tejidos , Animales , Proteína Morfogenética Ósea 2/genética , Regeneración Ósea , Técnicas de Transferencia de Gen , Osteogénesis , Ratas , Cráneo , Microtomografía por Rayos XRESUMEN
Patients with diabetes mellitus (DM) have defective healing of bone fractures. It was previously shown that nonviral gene delivery of plasmid DNA (pDNA) that independently encodes bone morphogenetic protein-2 (BMP-2) and fibroblast growth factor-2 (FGF-2), acts synergistically to promote bone regeneration in a DM animal model. Additionally, both insulin (INS) and the hormonally active form of vitamin D3, 1α,25-dihydroxyvitamin D3 (1α,25(OH)2 D3 ) (VD3) have independently been shown to play key roles in regulating bone fracture healing in DM patients. However, these individual therapies fail to adequately stimulate bone regeneration, illustrating a need for novel treatment of bone fractures in diabetic patients. Here, the ability of local delivery of INS and VD3 along with BMP-2 and FGF-2 genes is investigated to promote bone formation ectopically in Type-2 diabetic rats. A composite consisting of VD3 and INS is developed that contains poly(lactic-co-glycolic acid) microparticles (MPs) embedded in a fibrin gel surrounded by a collagen matrix that is permeated with polyethylenimine (PEI)-(pBMP-2+pFGF-2) nanoplexes. Using a submuscular osteoinduction model, it is demonstrated that local delivery of INS, VD3, and PEI-(pBMP-2+pFGF-2) significantly improves bone generation compared to other treatments, thusimplicating this approach as a method to promote bone regeneration in DM patients with bone fractures.
Asunto(s)
Diabetes Mellitus Experimental , Osteogénesis , Animales , Proteína Morfogenética Ósea 2/genética , Regeneración Ósea , Diabetes Mellitus Experimental/terapia , Humanos , Plásmidos , Polietileneimina , RatasRESUMEN
Dental implants are very successful medical devices, yet implant failures do occur due to biological and mechanical complications. Peri-implantitis is one such biological complication that is primarily caused by bacteria and their products at the implant soft tissue interface. Bacterial infiltration can be prevented by the formation of a reliable soft tissue seal encircling dental implants. Platelet-derived growth factor-BB (PDGF-BB) has significant chemotactic and proliferative effects on various mesenchymal cell types, including fibroblasts, and therefore can be an effective molecule to enhance the peri-implant soft tissue seal. To overcome the limitations of the recombinant protein form of PDGF-BB, such as cost and the need for supraphysiological doses, we have developed and characterized a titanium surface that is rendered bioactive by coating it with polyethylenimine-plasmid DNA (pDNA) nanoplexes in the presence of sucrose. Human embryonic kidney 293T (HEK293T) cells and human primary gingival fibroblasts (GFs) were successfully transfected in culture with enhanced green fluorescent protein (EGFP)-encoding pDNA or platelet-derived growth factor subunit B (PDGFB)-encoding pDNA loaded into nanoplexes and coated onto titanium disks in a dose-dependent manner. GFs were shown to secrete PDGF-BB for at least 7 days after transfection and displayed both minimal viability loss and increased integrin-α2 expression 4 days posttransfection.
Asunto(s)
Becaplermina , Materiales Biocompatibles Revestidos/química , Fibroblastos/metabolismo , Encía/metabolismo , Titanio/química , Transgenes , Becaplermina/biosíntesis , Becaplermina/genética , Adhesión Celular , Células HEK293 , Humanos , Prueba de Estudio Conceptual , Propiedades de SuperficieRESUMEN
BACKGROUND: Calcium ions (Ca2+ ) influence natural bone healing, and calcium is frequently used in bone tissue engineering scaffolds and cements. Scaffolds can also incorporate gene delivery systems to further promote osteoblast differentiation. Thus, our goal was to identify if Ca2+ concentration affects the transfection of bone marrow stromal cells because these cells play a major role in bone healing and can infiltrate gene-activated scaffolds designed to promote bone growth. METHODS: Bone marrow-derived mesenchymal stem cells (BMSCs) were cultured in media with Ca2+ concentrations ranging from 0 to 20 mM and transfected with polyethyleneimine-plasmid DNA (PEI-pDNA) complexes. Cell viability and transfection efficiency were determined using MTS assays and flow cytometry, respectively. PEI-pDNA complex localization in BMSCs was assessed using fluorescence microscopy. To determine BMSC differentiation, messenger RNA (mRNA) for osteocalcin and CBFA1 was quantified using real time-polymerase chain reaction (PCR). Calcium deposition was qualitatively assessed after three and 14 days using Alizarin Red staining. RESULT: Our results indicate that Ca2+ levels between 8 and 12 mM positively impacted transfection of BMSCs with PEI-pDNA complexes in terms of cell viability and transfection efficiency. A Ca2+ concentration of 10 mM also increased the expression of an osteogenic gene, osteocalcin, when the cells were transfected with plasmid DNA encoding bone morphogenetic protein 2 (BMP-2). CONCLUSION: Ca2+ at a 10 mM concentration can significantly reduce toxicity and enhance transfection efficiency when combined with PEI-pDNA complexes, and this combination can be specifically applied to further enhance the differentiation of BMSCs by using the combination of polyethyleneimine-plasmid bone morphogenetic protein 2 (PEI-pBMP-2) and 10 mM Ca2+ as compared with PEI-pBMP-2 alone.
Asunto(s)
Células de la Médula Ósea/metabolismo , Calcio/farmacología , Osteoblastos/metabolismo , Células Madre/metabolismo , Transfección , Células de la Médula Ósea/citología , Diferenciación Celular , Subunidad alfa 1 del Factor de Unión al Sitio Principal/biosíntesis , Subunidad alfa 1 del Factor de Unión al Sitio Principal/genética , Células HEK293 , Humanos , Osteoblastos/citología , Osteocalcina/biosíntesis , Osteocalcina/genética , Células Madre/citología , Células del Estroma/citología , Células del Estroma/metabolismoRESUMEN
Tissue engineering potentially offers new treatments for disorders of the temporomandibular joint which frequently afflict patients. Damage or disease in this area adversely affects masticatory function and speaking, reducing patients' quality of life. Effective treatment options for patients suffering from severe temporomandibular joint disorders are in high demand because surgical options are restricted to removal of damaged tissue or complete replacement of the joint with prosthetics. Tissue engineering approaches for the temporomandibular joint are a promising alternative to the limited clinical treatment options. However, tissue engineering is still a developing field and only in its formative years for the temporomandibular joint. This review outlines the anatomical and physiological characteristics of the temporomandibular joint, clinical management of temporomandibular joint disorder, and current perspectives in the tissue engineering approach for the temporomandibular joint disorder. The tissue engineering perspectives have been categorized according to the primary structures of the temporomandibular joint: the disc, the mandibular condyle, and the glenoid fossa. In each section, contemporary approaches in cellularization, growth factor selection, and scaffold fabrication strategies are reviewed in detail along with their achievements and challenges.
Asunto(s)
Trastornos de la Articulación Temporomandibular/cirugía , Articulación Temporomandibular , Ingeniería de Tejidos/métodos , Animales , Cavidad Glenoidea/anatomía & histología , Cavidad Glenoidea/citología , Cavidad Glenoidea/fisiología , Humanos , Péptidos y Proteínas de Señalización Intercelular/metabolismo , Péptidos y Proteínas de Señalización Intercelular/farmacología , Cóndilo Mandibular/anatomía & histología , Cóndilo Mandibular/citología , Células Madre/citología , Células Madre/fisiología , Articulación Temporomandibular/anatomía & histología , Articulación Temporomandibular/fisiología , Disco de la Articulación Temporomandibular/anatomía & histología , Disco de la Articulación Temporomandibular/citología , Trastornos de la Articulación Temporomandibular/diagnóstico , Trastornos de la Articulación Temporomandibular/etiología , Andamios del TejidoRESUMEN
This work focuses on the development of a system to control the formation of bone to complement developments that have enabled potent regeneration of bony tissue. Scaffolds were fabricated with chemically modified RNA encoding for bone morphogenetic protein-9 (cmBMP9) and capped with salicylic acid (SA)-containing polymer (SAPAE). The goal was to determine if SAPAE could inhibit the formation of bone in a pilot animal study since cmBMP9 has been demonstrated to be highly effective in regenerating bone in a rat calvarial defect model. The results indicated that cmBMP9 increased bone formation (30% increase in area covered compared to control) and that SAPAE trended toward reducing the bone formation. These results suggest SAPAE could be useful as a chemical agent in reducing unwanted bone formation in implants loaded with cmBMP9.