Improving the rigor and utility of botanical toxicity studies: Recommended resources.

Interest in botanicals, particularly as dietary supplement ingredients, is growing steadily. This growth, and the marketing of new ingredients and combination products as botanical dietary supplements, underscores the public health need for a better understanding of potential toxicities associated with use of these products. This article and accompanying template outline the resources to collect literature and relevant information to support the design of botanical toxicity studies. These resources provide critical information related to botanical identification, characterization, pre-clinical and clinical data, including adverse effects and interactions with pharmaceuticals. Toxicologists using these resources should collaborate with pharmacognosists and/or analytical chemists to enhance knowledge of the botanical material being tested. Overall, this guide and resource list is meant to help locate relevant information that can be leveraged to inform on decisions related to toxicity testing of botanicals, including the design of higher quality toxicological studies.

Photochemical CO2 reduction with mononuclear and dinuclear rhenium catalysts bearing a pendant anthracene chromophore.

A series of anthracene-substituted mononuclear and dinuclear rhenium complexes have been studied for photocatalytic CO2 reduction. The effects on catalytic activity of one versus two covalently-linked active sites, their relative proximity to one another, and the pendant organic chromophore are discussed.

Chemical-specific maximum allowable levels for pesticide residues in dietary supplements.

Dietary supplements are regulated by the U.S. FDA as a subset of foods. Most botanical dietary ingredients do not have pesticide tolerances, resulting in the enforcement of zero tolerance or general maximum residue limits (GMRL), rather than utilizing science-informed tolerances. In the current study, chemical-specific maximum allowable levels (MALs) were derived for 185 pesticides by converting existing, authoritative-body human health effects criteria. MALs were derived for 96% of pesticides using criteria established by the U.S. EPA. If multiple authoritative-bodies had established human health effects criteria, the most scientifically-defensible criteria was selected, taking into consideration both carcinogenic and non-carcinogenic endpoints. Five pesticides (o-phenylphenol, pirimicarb, oxadixyl, tetradifon, o,p'-DDT), lacking criteria established by the U.S. EPA had criteria established by other authoritative-bodies that were utilized in the derivation of MALs. Two pesticides did not have any established human health effects criteria (o,p'-DDD and o,p'-DDE). In total, MALs were derived from existing criteria for over 98% of the pesticides in the present study. Consequently, it is demonstrated that human health effects criteria derived by authoritative-bodies can be effectively utilized to derive chemical-specific, science-informed MALs applicable to all food commodities, including botanical ingredients, thereby, minimizing reliance on precautionary zero tolerance and GMRLs.

Molecular Engineering of Near Infrared Absorbing Thienopyrazine Double Donor Double Acceptor Organic Dyes for Dye-Sensitized Solar Cells.

The thienopyrazine (TPz) building block allows for NIR photon absorption in dye-sensitized solar cells (DSCs) when used as a π-bridge. We synthesized and characterized 7 organic sensitizers employing thienopyrazine (TPz) as a π-bridge in a double donor, double acceptor organic dye design. Donor groups are varied based on electron donating strength and sterics at the donor-π bridge bond with the acceptor groups varied as either carboxylic acids or benzoic acids on the π-bridge. This dye design was found to be remarkably tunable with solution absorption onsets ranging from 750 to near 1000 nm. Interestingly, the solution absorption measurements do not accurately approximate the dye absorption on TiO2 films with up to a 250 nm blue-shift of the dye absorption onset on TiO2. This shift in absorption and the effect on electron transfer properties is investigated via computational analysis, time-correlated single photon counting studies, and transient absorption spectroscopy. Structure-performance relationships were analyzed for the dyes in DSC devices with the highest performance observed at 17.6 mA/cm2 of photocurrent and 7.5% PCE for a cosensitized device with a panchromatic IPCE onset of 800 nm.

Micellar Effects on Photoinduced Electron Transfer in Aqueous Solutions Revisited: Dramatic Enhancement of Cage Escape Yields in Surfactant Ru(II) Diimine Complex/[Ru(NH3)6](2+) Systems.

The effect of cationic micelle incorporation on light induced electron transfer, charge separation and back electron transfer between an aqueous electron donor, [Ru(NH3)6](2+), and a series of Ru(II) diimine complex chromophores/acceptors, is presented. The chromophores have the general formula [(bpy)2Ru(LL)](2+) (LL = bpy; 4-R-4'-methyl-2,2'-bpy, R = pentyl (MC5), terdecyl (MC13), heptadecyl (MC17); 4,4'-di(heptadecyl)-2,2'-bpy (DC17)). Of the five chromophores, the MC13, MC17, and DC17 complexes associate with the added micelle forming surfactant, cetyltrimethylammonium bromide (CTAB). Quenching of the luminescence of the bpy and MC5 complexes by [Ru(NH3)6](2+) is unaffected by addition of surfactant, while rate constants for quenching of the MC13 and MC17 complexes are decreased. Cage escape yields following photoinduced electron transfer to generate [(bpy)2Ru(LL)](+) and [Ru(NH3)6](3+) are approximately 0.1 for all the water-soluble chromophores (excluding DC17) in the absence of added CTAB. In the presence of surfactant, the cage escape yields dramatically increase for the MC13 (0.4) and MC17 (0.6) complexes, while remaining unchanged for [Ru(bpy)3](2+) and the MC5 complex. Back electron transfer of the solvent separated ions is also strongly influenced by the presence of surfactant. For the MC13 and MC17 complexes, back electron transfer rate constants decrease by factors of 270 and 190, respectively. The MC5 complex exhibits two component back electron transfer, with the fast component having a rate constant close to that in the absence of surfactant and a slow component nearly 200 times smaller. Results are interpreted in terms of the partitioning of the 2+ and 1+ forms of the chromophores between aqueous and micellar phases. The extended lifetimes of the radical ions may prove useful in coupling the strong reductants formed to kinetically facile catalysts for reduction of water to hydrogen.

Diacetyl and 2,3-pentanedione exposures associated with cigarette smoking: implications for risk assessment of food and flavoring workers.

Diacetyl and 2,3-pentanedione inhalation have been suggested as causes of severe respiratory disease, including bronchiolitis obliterans, in food/flavoring manufacturing workers. Both compounds are present in many food items, tobacco, and other consumer products, but estimates of exposures associated with the use of these goods are scant. A study was conducted to characterize exposures to diacetyl and 2,3-pentanedione associated with cigarette smoking. The yields (µg/cigarette) of diacetyl and 2,3-pentanedione in mainstream (MS) cigarette smoke were evaluated for six tobacco products under three smoking regimens (ISO, Massachusetts Department of Public Health, and Health Canada Intense) using a standard smoking machine. Mean diacetyl concentrations in MS smoke ranged from 250 to 361 ppm for all tobacco products and smoking regimens, and mean cumulative exposures associated with 1 pack-year ranged from 1.1 to 1.9 ppm-years. Mean 2,3-pentanedione concentrations in MS smoke ranged from 32.2 to 50.1 ppm, and mean cumulative exposures associated with 1 pack-year ranged from 0.14 to 0.26 ppm-years. We found that diacetyl and 2,3-pentanedione exposures from cigarette smoking far exceed occupational exposures for most food/flavoring workers who smoke. This suggests that previous claims of a significant exposure-response relationship between diacetyl inhalation and respiratory disease in food/flavoring workers were confounded, because none of the investigations considered or quantified the non-occupational diacetyl exposure from cigarette smoke, yet all of the cohorts evaluated had considerable smoking histories. Further, because smoking has not been shown to be a risk factor for bronchiolitis obliterans, our findings are inconsistent with claims that diacetyl and/or 2,3-pentanedione exposure are risk factors for this disease.

Evaluation of tremolite asbestos exposures associated with the use of commercial products.

Tremolite is a noncommercial form of amphibole mineral that is present in some chrysotile, talc, and vermiculite deposits. Inhalation of asbestiform tremolite is suspected to have caused or contributed to an increased incidence of mesothelioma in certain mining settings; however, very little is known about the magnitude of tremolite exposure that occurred at these locations, and even less is known regarding tremolite exposures that might have occurred during consumer use of chrysotile, talc, and vermiculite containing products. The purpose of this analysis is to evaluate the exposure-response relationship for tremolite asbestos and mesothelioma in high exposure settings (mining) and to develop estimates of tremolite asbestos exposure for various product use scenarios. Our interpretation of the tremolite asbestos exposure metrics reported for the Thetford chrysotile mines and the Libby vermiculite deposits suggests a lowest-observed-adverse-effect level (LOAEL) for mesothelioma of 35-73 f/cc-year. Using measured and estimated airborne tremolite asbestos concentrations for simulated and actual product use, we conservatively estimated the following cumulative tremolite asbestos exposures: career auto mechanic: 0.028 f/cc-year; non-occupational use of joint compound: 0.0006 f/cc-year; non-occupational use of vermiculite-containing gardening products: 0.034 f/cc-year; home-owner removal of Zonolite insulation: 0.0002 f/cc-year. While the estimated consumer tremolite exposures are far below the tremolite LOAELs derived herein, this analysis examines only a few of the hundreds of chrysotile- and talc-containing products.