Optimization of vertically aligned carbon nanotube beam trajectory with the help of focusing electrode in the microchannel plate.

The focusing electrode plays an important role to reduce the electron beam trajectory with low dispersion and high brightness. This article summarizes the importance of the vertically aligned multi-walled carbon nanotube effect with the focusing electrode. First of all, the effect of electron beam trajectory is studied with the different heights, hole sizes, and applied voltage of the focusing electrode by the opera 3D simulation. The field emission electron beam spot is captured in the microchannel plate which helps to reduce the signal noise effect and damage of CNT tips by the joule heating effect. The high-dense bright spot is optimized at the focusing electrode hole size of 2 mm, and the height of 1 mm from the gate mesh electrode at the low bias voltage of - 200 V without the loss of current. The FWHM of the electron beam is calculated 0.9 mm with its opening angle of 0.9° which could be applicable in high-resolution multi-electron beam microscopy and nano-focused X-ray system technology.

Beam Trajectory Analysis of Vertically Aligned Carbon Nanotube Emitters with a Microchannel Plate.

Vertically aligned carbon nanotubes (CNTs) are essential to studying high current density, low dispersion, and high brightness. Vertically aligned 14 × 14 CNT emitters are fabricated as an island by sputter coating, photolithography, and the plasma-enhanced chemical vapor deposition process. Scanning electron microscopy is used to analyze the morphology structures with an average height of 40 µm. The field emission microscopy image is captured on the microchannel plate (MCP). The role of the microchannel plate is to determine how the high-density electron beam spot is measured under the variation of voltage and exposure time. The MCP enhances the field emission current near the threshold voltage and protects the CNT from irreversible damage during the vacuum arc. The high-density electron beam spot is measured with an FWHM of 2.71 mm under the variation of the applied voltage and the exposure time, respectively, which corresponds to the real beam spot. This configuration produces the beam trajectory with low dispersion under the proper field emission, which could be applicable to high-resolution multi-beam electron microscopy and high-resolution X-ray imaging technology.

Cold plasma seed priming modulates growth, redox homeostasis and stress response by inducing reactive species in tomato (Solanum lycopersicum).

Seed germination and vegetative growth are two important plant growing stages that are vulnerable to physical and biological stress. Improvement in crop germination potential and seedling growth rate generally leads to high crop productivity. Cold plasma is a promising technology used to improve seed germination and growth. Structural changes on tomato seed surface exposed with cold air plasma jet for a different time period (1 min, 5 min, 10 min) was examined by SEM. For in-depth study, different physiological parameter such as seed germination and seedling growth, biochemical parameter such as reactive species status, antioxidants and phytohormone, and molecular analysis of various gene expression was also evaluated. Drought stress tolerance potential of cold plasma primed tomato seedling was also examined under 30% PEG stress. Cold plasma seed priming modulates tomato seed coat and improves the germination efficiency. It also induces growth, antioxidants, phytohormone, defense gene expression, and drought stress tolerance potential of tomato seedling. Cold plasma seeds priming augment the reactive species at a molecular level within seedlings, which changes the biochemistry and physiological parameters of plants by inducing different cellular signaling cascades.

Analysis of the effects of Cu-MOFs on fungal cell inactivation.

Three dimensional (3D) copper metal organic frameworks (Cu-MOFs) containing glutarates and bipyridyl ligands (bpa = 1,2-bis(4-pyridyl)ethane, bpe = 1,2-bis(4-pyridyl)ethylene, or bpp = 1,3-bis(4-pyridyl)propane) were synthesized by using previously reported hydrothermal reactions or a layering method. All three Cu-MOFs contained well-defined one dimensional (1D) channels with very similar pore shapes and different pore dimensions. The bulk purities of the Cu-MOFs were confirmed using powder X-ray diffraction (PXRD) and infrared spectroscopy (IR) spectra. When the three types of Cu-MOFs were applied to Candida albicans cells and Aspergillus niger spores, an average of about 50-80% inactivation was observed at the highest concentration of Cu-MOFs (2 mg mL-1). The efficiency of the fungal inactivation was not significantly different among the three different types (bpa, bpe, bpp). Treatment of the fungi using Cu-MOFs induced an apoptosis-like death and this was more severe in A. niger than C. albicans. This may be due to elevation of the intracellular level of reactive oxygen species (ROS) in A. niger. Generation of the reactive species in solution by Cu-MOFs was observed. However, there was a dramatic variation in the levels observed among the three types. Our results suggest that Cu-MOFs can produce antifungal effects and induce apoptosis-like death of the fungi, which was probably caused by the elevated level of intracellular reactive species.