Antimicrobial activity of nisin adsorbed to surfaces commonly used in the food industry.

The adsorption isotherms of nisin to three food contact surfaces, stainless steel, polyethyleneterephthalate (PET), and rubber at 8, 25, 40, and 60 degrees C, were calculated. For all surfaces, the increase in temperature led to a decrease in the affinity between nisin and the surface. The rubber adsorbed a higher amount of nisin (0.697 microg/cm2) in comparison with PET (0.665 microg/cm2) and stainless steel (0.396 microg/cm2). Adsorption of nisin to the stainless steel surface described L-2 type curves for all temperatures assayed. However, for PET and rubber surfaces, the isotherms were L-2 type (at 40 and 60 degrees C) and L-4 type curves (at 8 and 25 degrees C). Nisin retained its antibacterial activity once adsorbed to the food contact surfaces and was able to inhibit the growth of Enterococcus hirae CECT 279 on Rothe agar medium. The attachment of three Listeria monocytogenes strains to the three surfaces was found to be dependent on the surface, the strain, and the initial bacterial suspension in contact with the surface. The adsorption of Nisaplin on surfaces reduced the attachment of all L. monocytogenes strains tested. The effect of PET-based bioactive packaging in food was very encouraging. When applied to a food system, nisin-adsorbed PET bottles reduced significantly (P < 0.05) the levels of the total aerobic plate counts in skim milk by approximately 1.4 log units after 24 days of refrigerated storage (4 degrees C), thus extending its shelf life.

Fed-batch pediocin production by Pediococcus acidilactici NRRL B-5627 on whey.

Cell growth and pediocin production by Pediococcus acidilactici NRRL B-5627 on whey were compared by using batch fermentation and re-alkalized fed-batch fermentation. The batch fermentations were performed on DWG [DW (diluted whey) supplemented with 1% (w/v) glucose], DWYE [DW supplemented with 2% (w/v) yeast extract] and DWGYE (DW supplemented with 1% glucose plus 2% yeast extract) media. The fed-batch culture on DWYE medium was fed with a mixture of concentrated whey (48 g of total sugars/l) supplemented with 2% yeast extract and 400 g/l concentrated glucose. The re-alkalized fed-batch culture was characterized by higher biomass (6.57 g/l) and pediocin [517.6 BU (bacteriocin activity units)/ml] concentrations compared with the batch processes on MRS (de Man, Rogosa and Sharpe) broth (1.76 g/l and 493.2 BU/ml), DW (0.17 g/l and 57.7 BU/ml), DWG (0.14 g/l and 53.6 BU/ml), DWYE (1.43 g/l and 187.6 BU/ml) and DWGYE (1.28 g/l and 167.3 BU/ml) media. A mixed acid fermentation was observed during the growth of P. acidilactici NRRL B-5627 in the fed-batch culture on DWYE medium, and other products (acetic acid and ethanol) in addition to lactic acid accumulated in the medium. Mathematical models were set up to describe fed-batch production of biomass and pediocin by P. acidilactici. The models developed offer a better fit and a more realistic description of the experimental biomass and pediocin production data when compared with the logistic and Luedeking and Piret model.