Radiographic Evaluation of the Gap between Cemented Post and Remaining Gutta-Percha in Endodontically Treated Teeth Performed by Undergraduate Students: A Retrospective Cross-Sectional Study.

The coronal seal in root canal-treated teeth may be compromised depending on the accuracy of post space preparation and post cementation along with remaining gutta-percha. Root canal treatment can be compromised by endotoxins released by the coronal bacteria as a result of microleakage. The study was conducted by undergraduate students to measure the gap between the cemented post and residual gutta-percha. In total, 217 endodontically treated teeth were evaluated with intraoral peri-apical radiographs. Based on the intraoral periapical radiographic examination in the CS-R4 program, Group I had no gap, Group II had a gap of >0 to 2 mm, and Group III had a gap of more than 2 mm between the end of the cemented post and the remaining gutta-percha. In total, 40% (n = 87) of the teeth had no gap, 59% (127) had a gap of >0 to 2 mm, and 1% (n = 3) had a gap of more than 2 mm between the cemented post end and remaining gutta. Chi square test revealed a significant difference in the gap between the post and remaining gutta-percha between males and females students (p < 0.001). In terms of the gap between the cemented post end and the residual gutta-percha, the root canal treated teeth with post and core by undergraduates were clinically acceptable.

Assessment of Oral Mucosal Lesions (OML), Periodontal Health Conditions, and Unmet Dental Treatment Needs in the Rural Adult Population of Jharkhand, North India.

Background Dental diseases like caries, periodontal diseases, and oral mucosal lesions (OML) are common findings in rural adult populations that greatly impact their quality of life. Aim To assess OML, periodontal health conditions, and unmet dental treatment needs in the rural adult population in Jharkhand. Methodology A total of 700 permanent residents of Bero Block, Jharkhand, North India, in the age group of 35-44 years, participated in this cross-sectional study. Both men and women were equally represented. Their socio-demographic characteristics and previous dental visits were collected using standardized proforma. An assessment of periodontal health conditions, OML, and unmet dental treatment needs was done using the World Health Organization (WHO) Oral Health Assessment Proforma of 1997. Results It was found that over half (54.3%) of the study population had the adverse habit of smoking and chewing paan. Males were more likely to experience leukoplakia (18.87%), whereas females were more likely to experience abscesses (9.43%). The majority of males and females had a community periodontal index (CPI) score and loss of attachment (LOA) score greater than two, which indicated poor periodontal health as assessed by the periodontal index. Both males and females needed extraction of the diseased teeth as their primary treatment. Conclusion The rural adult population residing in the Bero block of Jharkhand showed poor periodontal health and high unmet dental treatment needs. These people need effective oral health promotion policies and dental health education to improve their oral health.

Replacement of missing anterior tooth using screw retained implant prosthesis in the esthetic zone: a case report with 3 years of follow up.

As more and more dental practitioners are focusing on implant-supported fixed restorations, some clinicians favor the use of cement retained restorations while others consider screw-retained prosthesis to be the best choice. As both types of prostheses have certain advantages and disadvantages, clinicians should be aware of the limitations of each type. Screw-retained implant restorations have an advantage of predictable retention, retrievability and lack of potentially retained sub-gingival cement. However, a few disadvantages exist such as precise placement of the implant for optimal and esthetic location of the screw access hole and obtaining passive fit. On the other hand, cement retained restorations eliminates unaesthetic screw access holes; have passive fit of castings; reduce stress to splinted implants because of minor misfit of the framework; reduced complexity of lab procedures; enhanced esthetics; reduced cost factors and non disrupted morphology of the occlusal table. This case report presents the replacement of missing left central incisor using screw-retained implant prosthesis due to palatal trajectory of the implant placement and inadequate abutment height for retention of cement retained prosthesis.

A comparative evaluation of linear dimensional accuracy of the dies obtained using three conceptually different die systems in the fabrication of implant prosthesis: an in vitro study.

STATEMENT OF PROBLEM: Given that meticulous implant prosthodontic procedures are recommended to obtain the best possible intraoral fit, the die systems used for multi implant casts warrant further investigation. Die stone expansion and errors introduced by removable die casts may exceed the accuracy required for the passive fit of implant prosthesis. PURPOSE: The purpose of the study was to evaluate the linear dimensional accuracy between the implant master die and three conceptually different die systems such as Pindex system, Accu-trac precision die system, and Conventional brass dowel pin system. MATERIALS AND METHODS: Thirty impressions of implant master die were made with polyether impression material. Ten experimental implant casts were fabricated for each of the three different die systems tested: Accu-trac precision die tray system, Pindex system, and conventional brass dowel pin system. The solid experimental casts were sectioned and then removed from the die system 30 times. Linear distances between all six possible distances were measured from one centre of the transfer coping to the other, using a co-ordinate measuring machine in millimeters up to accuracy of 0.5 microns. Data were tabulated and statistically analyzed by Binomial non parametric test using SPSS version 15. RESULTS: Significant differences were found for distance A-B (P = 0.002), A-C ( P = 0.002), A-D (P value = 0.002), and B-D ( P = 0.021) in Conventional Dowel pin system however for Accu-trac precision die tray system, it was significant only for distance A-D (P = 0.002) but for Pindex system it was non-significant for all the distances measured. CONCLUSION: Within the limitations of this study, use of Pindex system is recommended when sectioned dies are needed for a multi implant retained prosthesis.

Spring-loaded custom tray: an alternative technique for recording impressions in a patient with a restricted mouth opening.

For patients with extensive head and neck injuries due to trauma and/or extensive surgical procedures, their ability to open the mouth is severely limited. Prosthodontic treatment of these patients often leads to compromised impressions and prostheses. When making an impression, a wide mouth opening is necessary to ensure both proper tray insertion and the correct alignment during border molding procedures. For patients with a restricted mouth opening, it may be necessary to modify the standard impression procedure to fabricate a prosthesis successfully. This article describes an alternative method for fabricating a custom impression tray for a complete denture in patients with limited mouth opening abilities.

Comprehensive Rehabilitation of Partially Amputated Index Finger with Silicone Prosthesis: A Case Report with 3 years of Follow Up.

The loss of all or part of a finger following traumatic amputation may have a negative impact on physical and psychological well-being. An esthetic prosthesis can offer psychological, functional, and rehabilitative advantages. One of the major problems associated with somato-prosthetic replacement of partially amputated finger is inadequate retention of the prosthesis. This may stem from the weight of the prosthesis, inadequate tissue support, and/or the particular area of the finger to be replaced. A number of means have been employed to enhance retention. Among the more common are adhesives, adhesive tape, magnets and implants. The purpose of this article is to describe a technique which eliminates the need for adhesive materials and utilizes copper wire to fabricate a finger ring as a primary means of retention. This technique can be utilized whenever the prosthesis encompasses more than 180° of the affected area. This clinical report presents a case of rehabilitation of a partially amputated index finger defect and describes a method of retention for the same with a copper ring.

An innovative technique to restore velopharyngeal incompetency for a patient with cleft lip and palate.

Treatment of cleft lip and palate patients often demand well-coordinated work of medical and dental specialists. In spite of surgical and orthodontic therapy, prosthetic rehabilitation is always necessary because of partial anadontia, maxillary hypoplasia and velopharyngeal dysfuction. The aim of the prosthetic treatment is to improve aesthetics, function and speech of the patients; however, factors like underdeveloped and collapsed maxillary arch, retrognathic maxilla and reduced alveolar ridge height make the treatment challenging. This clinical report describes an interdisciplinary approach for the management of cleft lip and palate patient associated with mutilated dentition. The prosthetic phase began along with orthodontic treatment to achieve sufficient space distribution, which was restored with fixed dental prosthesis to stabilise the achieved status of occlusion. Palatal lift prosthesis was fabricated to restore the velopharyngeal incompetency with an innovative technique using 'standard orthodontic expansion screw' to eliminate hypernasality, decrease intelligibility of speech and to aid in deglutition.