RESUMEN
Transition metal oxides based anodes are facing crucial problems of capacity fading at long cycles and high rates due to electrode degradations. In this prospective, an effective strategy is employed to develop advanced electrode materials for lithium-ion batteries (LIBs). In the present work, a mesoporous Co3O4@CdS hybrid sructure is developed and investigated as anode for LiBs. The hybrid structure owning porous nature and large specific surface area, provides an opportunity to boost the lithium storage capabilities of Co3O4 nanorods. The Co3O4@CdS electrode delivers an initial discharge capacity of 1292 mA h g-1 at 0.1C and a very stable reversible capacity of 760 mA h g-1 over 200 cycles with a capacity retention rate of 92.7%. In addition, the electrode exhibits excellent cyclic stability even after 800 cycles and good rate performance as compared to previously reported electrodes. Moreover, density functional theory (DFT) and electrochemical impedance spectroscopy (EIS) confirm the enhanced kinetics of the Co3O4@CdS electrode. The efficient performance of the electrode may be due to the increased surface reactivity, abundant active sites/interfaces for rapid Li+ ion diffusion and the synergy between Co3O4 and CdS NPs. This work demonstrates that Co3O4@CdS hybrid structures have great potential for high performance batteries.
RESUMEN
Bi-functional materials provide an opportunity for the development of high-performance devices. Up till now, bi-functional performance of NiCo2O4@SnS2nanosheets is rarely investigated. In this work, NiCo2O4@SnS2nanosheets were synthesized on carbon cloth by utilizing a simple hydrothermal technique. The developed electrode (NiCo2O4@SnS2/CC) was investigated for the detection of L-Cysteine and supercapacitors applications. As a non-enzymatic sensor, the electrode proved to be highly sensitive for the detection of L-cysteine. The electrode exhibits a reproducible sensitivity of 4645.82µA mM-1cm-2in a wide linear range from 0.5 to 5 mM with a low limit of detection (0.005µM). Moreover, the electrode shows an excellent selectivity and long-time stability. The high specific surface area, enhanced kinetics, good synergy and distinct architecture of NiCo2O4@SnS2nanosheets produce a large number of active sites with substantial energy storage potential. As a supercapacitor, the electrode exhibits improve capacitance of 655.7 F g-1at a current density of 2 A g-1as compare to NiCo2O4/CC (560 F g-1). Moreover, the electrode achieves 95.3% of its preliminary capacitance after 10 000 cycles at 2 A g-1. Our results show that NiCo2O4@SnS2/CC nanosheets possess binary features could be attractive electrode material for the development of non-enzymatic biosensors as well as supercapacitors.
RESUMEN
The development of a highly sensitive and selective non-enzymatic electrochemical biosensor for precise and accurate determination of multiple disease biomarkers has always been challenging and demanding. The synthesis of novel materials has provided opportunities to fabricate dependable biosensors. In this perspective, we have presented and discussed recent challenges and technological advancements in the development of non-enzymatic cholesterol electrochemical biosensors and recent research trends in the utilization of functional nanomaterials. This review gives an insight into the electrochemically active nanomaterials having potential applications in cholesterol biosensing, including metal/metal oxide, mesoporous metal sulfide, conductive polymers, and carbon materials. Moreover, we have discussed the current strategies for the design of electrode material and key challenges for the construction of an efficient cholesterol biosensor. In addition, we have also described the current issues related to sensitivity and selectivity in cholesterol biosensing.
Asunto(s)
Técnicas Biosensibles , Nanoestructuras , Electrodos , Polímeros , Colesterol , Técnicas ElectroquímicasRESUMEN
The detection of cholesterol is very crucial in clinical diagnosis for rapid and accurate monitoring of multiple disease-biomarkers. There is a great need for construction of a highly reliable and stable electrocatalyst for the efficient detection of cholesterol. In this work, mesoporous NiCo2S4nanoflakes of enhanced electrochemical properties are prepared through a facile hydrothermal approach. The developed nanoflakes modified nickel foam electrode exhibits outstanding electrocatalytic properties for the detection of cholesterol with high selectivity. The electrode displays excellent sensitivity of 8623.6µA mM-1cm-2, in the wide linear range from 0.01 to 0.25 mM with a low detection limit of 0.01µM. In addition, NiCo2S4structure reveals good thermal stability and reproducibility over a period of 8 weeks. Moreover, the nanoflakes show good response for detection of cholesterol in real samples. Our results demonstrate the potential use of NiCo2S4as a catalyst for the development of cost-effective electrochemical sensors for medical and industrial applications.
Asunto(s)
Técnicas Electroquímicas , Níquel , Colesterol , Técnicas Electroquímicas/métodos , Electrodos , Níquel/química , Reproducibilidad de los ResultadosRESUMEN
Background Gliomas are the most prevalent intrinsic tumors of the central nervous system and are categorized from grade I to grade IV. Magnetic resonance imaging (MRI) provides exact diagnosis, prognosis, and assessment of tumor response to current chemotherapy/immunotherapy and radiation therapy. With histopathology serving as the gold standard, we aimed to assess the diagnostic accuracy of magnetic resonance spectroscopy (MRS) in predicting glioma grade. Methodology This cross-sectional study was conducted in the Department of Radiology, KRL Hospital, Islamabad, from December 15, 2019, to September 30, 2021. After providing written consent, 80 patients with untreated gliomas were included in this study. The voxel of interest was identified using MRI brain conventional contrast-enhanced sequences to assess the grade of the gliomas and link it to the histology report. Following this identification, tissue metabolites were calculated using MRS. Results The patients' age ranged from 13 to 80 years, with a mean age of 49.5 years. Male patients comprised 57.5% of the total study population, while female patients comprised 42.5%. Overall, 23.75% of patients had low-grade tumors, while 76.25% had high-grade tumors. Low-grade tumors had a choline (Cho)/creatine (Cr) metabolite ratio of 1.7421, whereas high-grade tumors had an average Cho/Cr metabolite ratio of 2.5575. N-acetyl aspartate (NAA)/Cr ratio was 1.6368 in low grade and 0.6734 in high-grade tumors. Sensitivity of 77% and specificity of 84.2% were noted, with 78.75% diagnostic accuracy for the Cho/Cr ratio. Conclusions Multivoxel MRS has been shown to reliably predict the grade of gliomas despite its non-invasive nature and lack of procedural challenges. When used together Cho/Cr and NAA/Cr ratios and histopathology can accurately determine tumor grade and can be used as a supplementary non-invasive technique.
RESUMEN
Two-dimensional (2D) transition-metal dichalcogenide materials show potential for use in alkali metal ion batteries owing to their remarkable physical and chemical properties. Nevertheless, the electrochemical energy storage performance is still impaired by the tendency of aggregation, volume, and morphological change during the conversion reaction and poor intrinsic conductivity. Until now, ultrathin molybdenum disulfide nanosheets with a metallic-phase structure on the inner surface of mesoporous hollow carbon spheres (M-MoS2@HCS) have rarely been investigated as an anode for sodium-ion batteries. In this work, a novel M-MoS2@HCS anode was designed and synthesized by employing a template-assisted solvothermal reaction. Structural and chemical analyses indicate that the M-MoS2 nanosheets with a larger interlayer spacing compared to their semiconductor counterpart grow on the inner surface of HCS via covalent interactions. When used as the anode materials for Na+ storage, the M-MoS2@HCS anode presents durable and rapid sodium storage properties. The developed electrode shows a reversible capacity of 291.2 mAh g-1 at a high current density of 5 A g-1. After 100 cycles at 0.1 A g-1, the reversible capacity is 401.3 mAh g-1 with a capacity retention rate of 79%. After 2500 cycles at 1.0 A g-1, the electrode still delivers a reversible capacity of 320.1 mAh g-1 with a capacity retention rate of 75%. The excellent sodium storage capability of the MoS2@HCS electrode is explained by the special structural design, which reveals great potential to accelerate the practical applications of transition-metal dichalcogenide electrodes for sodium storage.
RESUMEN
The development of a reliable non-enzymatic multi-analyte biosensor is remained a great challenge for biomedical and industrial applications. In this prospective, rationally designed electrode materials having voltage switchable electrocatalytic properties are highly promising. Here, we report vanadium doped ZnO engineered nanostructures (Zn1-xVxO where 0 ≤ x ≤ 0.1) which exhibit voltage switchable electrocatalytic properties for accurate measurements of glucose and hydrogen peroxide. Microstructures and chemical analysis show that the oxygen vacancies in the material can be tuned by controlling the stoichiometric ratios which play key role for voltage dependent measurements of different analytes. The developed Zn1-xVxO nanostructures exhibit outstanding sensing ability for binary analytes with a high selectivity, low detection limit, thermal stability and long-term stability. The Zn0.9V0.1O/glassy carbon (GC) electrode shows 3-fold increase in reproducible sensitivity for both glucose (655.24µA mM-1cm-2) and H2O2(13309.37µA mM-1cm-2) as compared to the pristine ZnO/GC electrode. Moreover, the electrode also shows good response for human blood serum and commercially available samples. The results demonstrate that defect engineering is a promising route for the development of cost-effective non-enzymatic multi-analyte sensors for practical applications.
RESUMEN
The synthesis of one-dimensional heterostructures having high dielectric constant and low dielectric loss has remained a great challenge. Until now, the dielectric performance of ZnO-ZnS heterostructures was scarcely investigated. In this work, large-scale ZnO-ZnS heterostructures were synthesized by employing the chemical vapor deposition method. High resolution transmission electron microscopy (HRTEM) confirms the formation of heterostructures. X-ray photoelectron spectroscopy (XPS) shows that S atoms fill up the oxygen vacancy (VO) in ZnO, leading to the suppression of charge carrier's movement from ZnO to ZnS; instead there is charge transfer from ZnS to ZnO. Conductivity mismatch between adjacent ZnO and ZnS materials leads to the accumulation of free charges at the interface of the heterostructure and can be considered as a capacitor-like structure. The electrical behaviors of the potential phases of ZnO, ZnS and the ZnO-ZnS heterostructure are well interpreted by a best fitted equivalent circuit model. Each heterostructure acts as a polarization node with a specific flip-flop frequency and all such nodes form continuous transmission of polarization, which jointly increase the dielectric energy-storage performance. The orientational polarization of the polarons and Zn2+-VO dipoles present at the heterostructure interface contributes to the frequency stable dielectric constant at ≥103 Hz. Our findings provide a systematic approach to tailor the electronic transport and dielectric properties at the interface of the heterostructure. We suggest that this approach can be extended for improving the energy harvesting, transformation and storage capabilities of the nanostructures for the development of high-performance energy-storage devices.
RESUMEN
The development of a highly sensitive and selective non-enzymatic electrode catalyst for the detection of a target molecule was remained a great challenge. In this regard, bimetallic nanowires (BMNWs) are considered as promising electrode material for their fascinating physical/chemical properties superior to a single system. In this article, nickel cobalt (Ni x -Co) BMNWs with tunable stoichiometry were prepared by a template assisted electrodeposition method and their catalytic performance was investigated for the detection of hydrogen peroxide (H2O2). It has been found that Ni-Co (0.5:1) BMNWs/PC electrode exhibits superior non-enzymatic sensing ability toward H2O2 detection with a high selectivity. The electrode shows fast response within â¼3 s and an excellent reproducible sensitivity of 2211.4 µAmM-1 cm-2, which is the best compared to the individual Ni, Co, Ni-Co (0.3:1) BMNWs and previously reported electrodes. In addition, the electrode shows a linear response in the wide concentration range from 0.005 mM to 9 mM, low detection limit of 0.5 µM (S/N = 3.2) and a relatively long-term storage (50 d). Moreover, the sensor reveals excellent results for H2O2 detection in the real samples. The enhanced sensitivity of the Ni-Co (0.5:1) BMNWs based electrode may be due to the stable structure and synergy of Ni and Co. The results demonstrate that the catalytic activity of the electrode binary catalyst towards H2O2 detection can be improved by adjusting the Ni/Co ratio in BMNWs. The excellent performance of the electrode suggests that Ni-Co BMNWs are promising candidate for the construction of cost-effective electrochemical sensors for medical and industrial applications.
RESUMEN
A thin layer of gold nanoparticles (Au NPs) sputtered on cadmium sulfide quantum dots (CdS QDs) decorated anodic titanium dioxide nanotubes (TNTs) (Au/CdS QDs/TNTs) was fabricated and explored for the nonenzymatic detection of cholesterol and hydrogen peroxide (H2O2). Morphological studies of the sensor revealed the formation of uniform nanotubes decorated with a homogeneously dispersed CdS QDs and Au NPs layer. The electrochemical measurements showed an enhanced electrocatalytic performance with a fast electron transfer (â¼2 s) between the redox centers of each analyte and electrode surface. The hybrid nanostructure (Au/CdS QDs/TNTs) electrode exhibited about a 6-fold increase in sensitivity for both cholesterol (10,790 µA mM-1 cm-2) and H2O2 (78,833 µA mM-1 cm-2) in analyses compared to the pristine samples. The hybrid electrode utilized different operational potentials for both analytes, which may lead to a voltage-switchable dual-analyte biosensor with a higher selectivity. The biosensor also demonstrated a good reproducibility, thermal stability, and increased shelf life. In addition, the clinical significance of the biosensor was tested for cholesterol and H2O2 in real blood samples, which showed maximum relative standard deviations of 1.8 and 2.3%, respectively. These results indicate that a Au/CdS QDs/TNTs-based hybrid nanostructure is a promising choice for an enzyme-free biosensor due to its suitable band gap alignment and higher electrocatalytic activities.
Asunto(s)
Técnicas Biosensibles/métodos , Colesterol/sangre , Oro/química , Peróxido de Hidrógeno/sangre , Nanopartículas del Metal/química , Compuestos de Cadmio/química , Técnicas Electroquímicas/métodos , Humanos , Límite de Detección , Nanotubos/química , Puntos Cuánticos/química , Sulfuros/química , Titanio/químicaRESUMEN
Objective To investigate the diagnostic accuracy of the placental thickness measured by ultrasound sonography test (USG) in detecting intrauterine growth restriction (IUGR) babies in the third trimester of pregnancy, keeping IUGR (by parameters using Hadlock) as the gold standard. Methods and materials This cross-sectional study was conducted at the radiology department of KRL Hospital from August 5, 2020, to October 25, 2021. Informed written consent was also obtained from each patient, and the hospital's ethical committee approved the study. Three hundred and sixty-two (N=362) pregnant women patients knowing of their last menstrual period, age group 20-35 years, BMI usual, and 24 weeks gestation were included. The patient's complete history was taken by clinical examination and then ultrasound was carried out to measure the placental thickness. At 24, 32, and 36 weeks, the thickness of the placenta was assessed. The Hadlock method was used to compute the predicted fetal weight by measuring biparietal diameter (BPD), head circumference (HC), abdominal circumference (AC), and femur length (FL) on the GC Logiq P/6 three-dimensional machine (GE, Tampa, FL). SPSS v 23 (IBM Corp., Armonk, NY) was used to calculate the mean and standard deviation from the collected data. Results A total of 362 patients who presented in the radiology department for antenatal ultrasound in the third trimester were recruited in our study. The mean age was 27.26 ± 4.21 years (20-35 years). In our study, the mean placenta thickness at 24 gestation weeks was 24.55 ± 0.79 mm, at 32 gestation weeks was 31.84 ± 1.34 mm, and at 36 gestation weeks was 35.54 ± 2.78. Thus, ultrasound's sensitivity, specificity, positive predictive value, and negative predictive value to determine IUGR by placental thickness was 86.30%, 86.70%, 75%, and 92%, respectively. The diagnostic accuracy of ultrasound incorrectly estimating low placental thickness was 86.40%. Conclusion Between 24 and 36 weeks of pregnancy, placental thickness rises almost linearly. As a result, measuring placental thickness and other factors is critical for estimating fetal age, particularly in the late second and early third trimesters, when the exact duration of pregnancy is uncertain. Placentas that were less than 29 mm thick at 32 weeks and 31 mm thick at 36 weeks were related to higher morbidity, lower Apgar scores, and more nursery admissions.
RESUMEN
Ultralong V2O5 nanobelts have been successfully synthesized by a facile hydrothermal oxidation route. Oxygen vacancies are generated in the V2O5 nanobelts by annealing under N2 atmosphere at an elevated temperature. The microstructure and chemical composition of the pristine and annealed V2O5 nanobelts are studied by different methods. Compared to the pristine V2O5 nanobelts, the annealed V2O5 nanobelts sample possesses a higher reversible capacity of 177.8â¯mAhg-1 after 50 cycles at a current density of 0.3â¯Ag-1, corresponding to â¼0.27% capacity loss per cycle. At a higher current density of 1.2 Ag-1, the reversible capacity of annealed V2O5 electrode can reach 128.5â¯mAhg-1, which is two times larger than that of pristine V2O5 electrode. Ultralong flexible morphology together with oxygen vacancies in the annealed V2O5 electrode is considered to be responsible for the enhanced lithium storage properties.
RESUMEN
NiCo2O4 is a potential anode material for lithium ion battery due to its many advantages, such as high theoretical capacitance, low cost, and good electrochemical activity. In this study, mesoporous NiCo2O4 double-hemisphere (3-5⯵m) with high surface area (270.68â¯m2·g-1) and excellent electrochemical performances has been synthesized through a facile precipitation method followed with thermal treatment process. The prepared NiCo2O4 is pure phase and can be indexed as a face-centered-cubic with a typical spinel structure. Electrochemical tests show the prepared material has high specific capacities (910â¯mAh·g-1 at 100â¯mA·g-1), excellent cyclicity (908⯠mAh·g-1 at 100â¯mA·g-1 after 60 cycles) and remarkable high rate performance (after 100 cycles, 585â¯mAh·g-1 at 400â¯mAh·g-1, 415â¯mAh·g-1 at 800â¯mAh·g-1 and 320â¯mAh·g-1 at 1600â¯mAh·g-1 with coulombic efficiencies of almost 100%). The excellent performances of prepared NiCo2O4 are mainly caused by the unique double-hemisphere structure, which has large surface area, gives material more opportunity to contact with electrolyte and facilitates lithium ion spreading into the material along the radical direction, resulting in a promising application for next-generation lithium-ion batteries.
RESUMEN
Zinc oxide (ZnO) nanostructures have been studied extensively in the past 20 years due to their novel electronic, photonic, mechanical and electrochemical properties. Recently, more attention has been paid to assemble nanoscale building blocks into three-dimensional (3D) complex hierarchical structures, which not only inherit the excellent properties of the single building blocks but also provide potential applications in the bottom-up fabrication of functional devices. This review article focuses on 3D ZnO hierarchical nanostructures, and summarizes major advances in the solution phase synthesis, applications in environment, and electrical/electrochemical devices. We present the principles and growth mechanisms of ZnO nanostructures via different solution methods, with an emphasis on rational control of the morphology and assembly. We then discuss the applications of 3D ZnO hierarchical nanostructures in photocatalysis, field emission, electrochemical sensor, and lithium ion batteries. Throughout the discussion, the relationship between the device performance and the microstructures of 3D ZnO hierarchical nanostructures will be highlighted. This review concludes with a personal perspective on the current challenges and future research.
RESUMEN
In this letter, effect of Pb-doping on the electrical and optical properties of the as grown ZnO nanowires (NWs) have been investigated. The microstructural investigations show that the Pb-dopant substituted into wurtzite ZnO nanowires without forming any secondary phase. The amount of contents and valence state of Pb ions has been investigated through energy dispersive spectroscopy and X-ray photospectroscopy. The doped nanowires show a remarkable reduction of 15.3 nm (127.4 meV) in the optical band gap, while an increase amount of deep-level defects transition in visible luminescence. Furthermore, the reduction in the band gap and the presence of deep-level defects induces strong effect in the electrical resistivity of doped NWs, which makes their potential for the fabrication of nanodevices. The possible growth mechanism is also briefly discussed.
Asunto(s)
Plomo/química , Nanoestructuras/química , Nanoestructuras/ultraestructura , Óxido de Zinc/química , Conductividad Eléctrica , Ensayo de Materiales , Tamaño de la Partícula , RefractometríaRESUMEN
Vertically oriented well-aligned Indium doped ZnO nanowires (NWs) have been successfully synthesized on Au-coated Zn substrate by controlled thermal evaporation. The effect of indium dopant on the optical and field-emission properties of these well-aligned ZnO NWs is investigated. The doped NWs are found to be single crystals grown along the c-axis. The composition of the doped NWs is confirmed by X-ray diffraction (XRD), energy-dispersive spectroscopy (EDS), and X-ray photospectroscopy (XPS). The photoluminescence (PL) spectra of doped NWs having a blue-shift in the UV region show a prominent tuning in the optical band gap, without any significant peak relating to intrinsic defects. The turn-on field of the field emission is found to be â¼2.4 V µm(-1) and an emission current density of 1.13 mA cm(-2) under the field of 5.9 V µm(-1). The field enhancement factor ß is estimated to be 9490 ± 2, which is much higher than that of any previous report. Furthermore, the doped NWs exhibit good emission current stability with a variation of less than 5% during a 200 s under a field of 5.9 V µm(-1). The superior field emission properties are attributed to the good alignment, high aspect ratio, and better crystallinity of In-doped NWs.
RESUMEN
BACKGROUND: Papillon-Lefevre syndrome is a rare autosomal recessive disorder caused by cathepsin C gene mutation leading to the deficiency of cathepsin C enzymatic activity. The disease is characterized by palmoplantar hyperkeratosis, loss of deciduous and permanent teeth and increased susceptibility to infections. Onset of palmoplantar hyperkeratosis and periodontopathy is most commonly before the age of 4 years. MAIN OBSERVATIONS: A 15 year old boy with a history of frequent infections presented with hyperkeratosis of palms and soles, which worsened during winter season. Examination of the oral cavity revealed missing mandibular central incisors and left lateral incisors. Most remaining permanent teeth were mobile. Fibrosis and scarring of gingival and labial mucosa restricted opening of the mouth. CONCLUSION: Early diagnosis of Papillon-Lefevre syndrome may help preserve the teeth. We present a case of a late diagnosis of this syndrome.