RESUMEN
Cell lysis serves as an essential role in the sample preparation for intracellular material extraction in lab-on-a-chip applications. However, recent microfluidic-based cell lysis chips still face several technical challenges such as reagent removal, complex design, and high fabrication cost. Here, we report highly efficient on-chip photothermal cell lysis for nucleic acid extraction using strongly absorbed plasmonic Au nanoislands (SAP-AuNIs). The highly efficient photothermal cell lysis chip (HEPCL chip) consists of a PDMS microfluidic chamber and densely distributed SAP-AuNIs with large diameters and small nanogaps, allowing for broad-spectrum light absorption. The SAP-AuNIs induce photothermal heat, resulting in a uniform temperature distribution within the chamber and rapidly reaching the target temperature for cell lysis within 30 s. Furthermore, the localized plasmonic heating of SAP-AuNIs expeditiously triggers phase transition and photoporation in the directly contacted lipid bilayer of the cell membrane, resulting in rapid and highly efficient cell lysis. The HEPCL chip successfully lysed 93% of PC9 cells at 90 °C for 90 s without nucleic acid degradation. This on-chip cell lysis offers a new sample preparation platform for integrated point-of-care molecular diagnostics.
Asunto(s)
Ácidos Nucleicos , Calefacción , Microfluídica , Análisis de Secuencia por Matrices de Oligonucleótidos , CalorRESUMEN
Compact spectrometers facilitate non-destructive and point-of-care spectral analysis. Here we report a single-pixel microspectrometer (SPM) for visible to near-infrared (VIS-NIR) spectroscopy using MEMS diffraction grating. The SPM consists of slits, electrothermally rotating diffraction grating, spherical mirror, and photodiode. The spherical mirror collimates an incident beam and focuses the beam on the exit slit. The photodiode detects spectral signals dispersed by electrothermally rotating diffraction grating. The SPM was fully packaged within 1.7 cm3 and provides a spectral response range of 405â nm to 810â nm with an average 2.2â nm spectral resolution. This optical module provides an opportunity for diverse mobile spectroscopic applications such as healthcare monitoring, product screening, or non-destructive inspection.
RESUMEN
A large-area and ultrathin MEMS (microelectromechanical system) mirror can provide efficient light-coupling, a large scanning area, and high energy efficiency for actuation. However, the ultrathin mirror is significantly vulnerable to diverse film deformation due to residual thin film stresses, so that high flatness of the mirror is hardly achieved. Here, we report a MEMS mirror of large-area and ultrathin membrane with high flatness by using the silicon rim microstructure (SRM). The ultrathin MEMS mirror with SRM (SRM-mirror) consists of aluminum (Al) deposited silicon nitride membrane, bimorph actuator, and the SRM. The SRM is simply fabricated underneath the silicon nitride membrane, and thus effectively inhibits the tensile stress relaxation of the membrane. As a result, the membrane has high flatness of 10.6 m-1 film curvature at minimum without any deformation. The electrothermal actuation of the SRM-mirror shows large tilting angles from 15° to -45° depending on the applied DC voltage of 0~4 VDC, preserving high flatness of the tilting membrane. This stable and statically actuated SRM-mirror spurs diverse micro-optic applications such as optical sensing, beam alignment, or optical switching.
RESUMEN
Alloy nanostructures unveil extraordinary plasmonic phenomena that supersede the mono-metallic counterparts. Here we report silver-gold (Ag-Au) alloy nanohole arrays (α-NHA) for ultra-sensitive plasmonic label-free detection of Escherichia Coli (E. coli). Large-area α-NHA were fabricated by using nanoimprint lithography and concurrent thermal evaporation of Ag and Au. The completely miscible Ag-Au alloy exhibits an entirely different dielectric function in the near infra-red wavelength range compared to mono-metallic Ag or Au. The α-NHA demonstrate substantially enhanced refractive index sensitivity of 387â nm/RIU, surpassing those of Ag or Au mono-metallic nanohole arrays by approximately 40%. Moreover, the α-NHA provide highly durable material stability to corrosion and oxidation during over one-month observation. The ultra-sensitive α-NHA allow the label-free detection of E. coli in various concentration levels ranging from 103 to 108 cfu/ml with a calculated limit of detection of 59â cfu/ml. This novel alloy plasmonic material provides a new outlook for widely applicable biosensing and bio-medical applications.
RESUMEN
Alloyed metals in nanoscale exhibit some intriguing features that are absent in mono-metallic nanostructures. Here we report silver and gold alloyed nanoislands with high tunability of localized surface plasmon resonance (LSPR) wavelength in the visible range for wafer-level plasmonic color filter arrays. The nanofabrication includes two simple steps of concurrent thermal evaporation of Ag and Au grains and solid-state dewetting of the as-deposited nanocomposite thin film. The alloy ratio during the evaporation precisely tunes the LSPR wavelengths within 415-609 nm spectrum range. The elemental composition map reveals that alloyed nanoislands are completely miscible while preserving uniform size, regardless of the alloy ratio. Besides, the multiple lift-off processes and thermal dewetting of Ag/Au nanocomposite thin films successfully demonstrate the wafer-level nanofabrication of plasmonic color filter mosaic. Each plasmonic color pixel comprises different alloy ratio and efficiently transmits colors ranging from cyan, yellow, and magenta. The transmission spectra transposed onto a CIE 1931 color map show comparable color diversity to the plasmonic color filters fabricated by conventional e-beam lithographic techniques. This novel method provides a new direction for large-scale and visible plasmonic color filter arrays in advanced display or imaging applications.
RESUMEN
Subwavelength metal nanoislands thermally dewetted from a thin film emerge as a powerful and cost-effective photonic material, due to the formation of substantially strong nano-gap-based plasmonic hot spots and their simple large-area nanofabrication. Unlike conventional nanostructures, nanoislands dewetted from thin metal films can be formed on a large scale at the wafer level and show substrate-dependent plasmonic phenomena across a broad spectral range from ultraviolet to infrared. Substrate-selective dewetting methods for metal nanoislands enable diverse nanophotonic and optoelectronic technologies, underlining mechanical, structural, and material properties of a substrate. Emerging bioplasmonic technology using metal nanoislands also serves as a high-throughput and surface-sensitive analytical technique with wide-ranging application in rapid, real-time, and point-of-care medical diagnostics. This review introduces an assortment of dewetting fabrication methods for metal nanoislands on distinct substrates from glass to cellulose fibers and provides novel findings for metal nanoislands on a substrate by three-dimensional numerical modeling. Furthermore, the plasmonic properties of metal nanoislands and recent examples for their photonic applications, in particular, biological sensing, are technically summarized and discussed.
Asunto(s)
Nanoestructuras/química , Aleaciones/química , Electrónica , Metales/química , Nanomedicina , Óptica y Fotónica , Sistemas de Atención de PuntoRESUMEN
Structural coloration of natural surfaces often originates from the change of reflected colors depending on the viewing or illumination angle. Recently, the structural coloration of nanoplasmonic structures has attracted a great deal of attention due to high compactness, robust stability and high color-tunability, as well as high sensitivity to the incidence angle. Here we report complementary plasmonic structures (CPS) for transmission structural coloration by tailoring a single spectral peak depending on the incidence angle of light. The CPS features self-aligned silver nanohole and nanodisk arrays, supported by dielectric nanopillar arrays of hydrogen silsesquioxane. Unlike the conventional hybridized nanostructures of plasmonic nanohole and nanodisk arrays, the nanodisks of CPS effectively attenuate undesired spectral peaks of nanoholes by exploiting an extinction peak of nanodisks, serving as a spectral suppressor. As a result, a single transmission spectral peak becomes red-shifted from 736 nm to 843 nm as the incidence angle varies from 0° to 30°. This unique configuration provides a new direction for tunable filters that can be utilized for compact multispectral or hyperspectral imaging applications.
RESUMEN
Unlike monometallic materials, bimetallic plasmonic materials offer extensive benefits such as broadband tuning capability or high environmental stability. Here we report a broad range tuning of plasmon resonance of alloyed nanoislands by using solid-state dewetting of gold and silver bilayer thin films. Thermal dewetting after successive thermal evaporation of thin metal double-layer films readily forms AuAg-alloyed nanoislands with a precise composition ratio. The complete miscibility of alloyed nanoislands results in programmable tuning of plasmon resonance wavelength in a broadband visible range. Such extraordinary tuning capability opens up a new direction for plasmonic enhancement in biophotonic applications such as surface-enhanced Raman scattering or plasmon-enhanced fluorescence.
RESUMEN
This work reports plasmon enhanced photoacoustic generation by using a three dimensional plasmonic absorber. The 3D plasmonic absorber comprises a thin polymer film on glass nanopillar arrays with nanogap-rich silver nanoislands. The 3D plasmonic absorber clearly shows 24.6 times higher enhancement of photoacoustic signals at an excitation wavelength of 630 nm than a simple polymeric absorber. The photoacoustic enhancement results from the volumetric electromagnetic field enhancement on a light-absorbing polymer through 3D plasmonic nanostructures. This novel photoacoustic absorber provides a new direction for highly efficient ultrasonic generation.