Synthesis and demulsification performance of a novel low-temperature demulsifier based on trimethyl citrate.

A significant amount of water-in-oil (W/O) emulsion is generated during petroleum extraction. However, the current commercial demulsifiers are expensive to produce and requires high demulsification temperatures, leading to increased energy and economic consumption. To enhance the efficiency of demulsifiers and reduce the cost of demulsifying W/O emulsions, we have successfully developed a novel demulsifier named TCED through a straightforward two-step process. This demulsifier features trimethyl citrate as the hydrophilic core grafted with three hydrophobic chains. Its structure was characterized using EA, FT-IR and 1H NMR spectroscopy, and the demulsification performance was comprehensively evaluated. At a low demulsification temperature of 40 °C, TCED demonstrated a remarkable demulsification efficiency (DE) of 99.06% and 98.74% in emulsions containing water contents of 70% (E70) and 50% (E50), respectively. Especially, a DE of 100% could be obtained in both E70 and E50 emulsions at a concentration of 600 mg/L. Moreover, TCED displayed a high DE even at high salinity levels of 50,000 mg/L and across a wide pH range of 2-10. Additionally, the phase interface was consistently clear after demulsification. To investigate the demulsification mechanism of TCED, various adsorption kinetics experiments were conducted, including measurements of interfacial tension (IFT), surface tension (SFT), interfacial competitive adsorption, and stability of interfacial film. The results obtained from the experiments indicated that TCED possessed remarkable diffusion and replacement capabilities within the emulsions. As a result, it effectively disrupted the original interfacial active substances, such as asphaltenes aggregates found in crude oil. TCED exhibits a high DE at low concentration and temperature. This characteristic highlights its significant potential for low-temperature demulsification applications in the petroleum industry.

Diethylenetriamine modified biological waste for disposing oily wastewater.

Oily wastewater produced in the process of oil extraction has a potential threat to the environment. In this paper, diethylenetriamine was used to modify rice straw powder (RSP) by a solvent-free strategy, and the obtained product (AM-RSP) was utilized to dispose oily wastewater. AM-RSP was characterized by Field emission scanning electron microscope (FE-SEM), energy dispersive spectrometer (EDS), Fourier transform infrared spectroscope (FT-IR) and BET. The factors affecting the demulsification performance (DP) such as dosage, salinity and pH value were detailly investigated. The results indicated that light transmittance (ET) and oil removal rate (ER) of separated water could reach 93.5% and 96.5%, respectively, within 40 min with 150 mg/L of AM-RSP at room temperature. Also, AM-RSP had a good salt resistance. In addition, three-phase contact angle (TCA), formation of interfacial film, interfacial activity, dynamic interfacial tension (IFT), coalescence time of droplets and zeta potential were adopted to probe the demulsification mechanism.

Demulsification of oily wastewater using a nano carbon black modified with polyethyleneimine.

In this work, nano carbon black was modified with polyethyleneimine (CB-PEI) under an ultrasonic field. The obtained product was used as a demulsifier to break oily wastewater. Morphology, structure, and chemical composition of CB-PEI were systematically analyzed. Bottle test was carried out to evaluate the influence of dosage, pH value and salinity on the demulsification efficiency of the emulsion. The results showed that the light transmittance of water phase (TSW) after the demulsification was 79.1% and corresponding oil removal rate (ORR) could reach up to 99.4% with 60 mg/L of CB-PEI at ambient temperature for 30 min. In addition, the possible demulsification mechanism was explored by dynamic interface tension (IFT), elasticity modulus, wettability, self-assemble of interfacial membrane, zeta potential and micrograph analysis. It indicated that CB-PEI had an appropriate amphiphilicity and good interfacial activity, which could improve it quickly transfer to the oil-water interface and result in the oil-water separation. The current work provides a simple method to prepare a demulsifier with excellent performance, so it has a good application prospect for the treatment of oil-water emulsions.