Fabrication of a sustainable superhydrophobic surface of Ag-NPs@SA on copper alloy for corrosion resistance, photocatalysis, and simulated distribution of Ag atoms.

Artificial superhydrophobic surfaces that do not absorb water, like the lotus leaf, show tremendous promise in numerous applications. However, superhydrophobic surfaces are rarely used because of their low stability and endurance. A stable organic superhydrophobic surface (SHS) composed of novel morphology Ag-nanoparticles (NPs) has been fabricated on a copper alloy via etching, immersion, spraying, and annealing treatment, along with a static water contact angle (WCA) of 158 ± 1° and sliding angle (SA) less than 2°. The surface texture, composition, and morphology of the substrate surfaces were explored by using X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy, energy dispersive spectroscopy, and DFT-based Ag atom distribution. The anti-corrosion study of non-coated and Ag-NP-coated copper alloy was undertaken using electrochemical impedance spectroscopy. Ag-NPs +SA@SHS enhanced the corrosion resistance as compared with bare Cu alloy. The water droplet rolled down the coated Cu alloy, removed the chalk powder from the surface, and indicated an excellent self-cleaning function. Photodegradation of Congo red (CR) and methylene blue (MB) dye samples was assessed by measuring the absorbance through UV-Visible spectrophotometry, where the Ag-NPs coated on the copper alloy were used as a catalyst. The performance of the SHS@Ag-NPs in the aqueous solution was 99.31% and 98.12% for industrial pollutants (CR and MB), with degradation rates of 5.81 × 10-2 s-1 and 5.89 × 10-2 s-1, respectively. These findings demonstrated a simple, rapid, and low-energy fabrication technique for SHS@Ag-NPs. This research reveals a valuable approach for the fabrication of SHS@Ag-NPs on various substrates to extend the superhydrophobic surfaces with ultra-fast self-healing properties, for outdoor applications such as anti-corrosion, for an innovative approach for the remediation of polluted water treatment, and for industrial applications.

Global environmental and toxicological impacts of polybrominated diphenyl ethers versus organophosphate esters: A comparative analysis and regrettable substitution dilemma.

The prevalence of organophosphate esters (OPEs) in the global environment is increasing, which aligns with the decline in the usage of polybrominated diphenyl ethers (PBDEs). PBDEs, a category of flame retardants, were banned and classified as persistent organic pollutants (POPs) through the Stockholm Convention due to their toxic and persistent properties. Despite a lack of comprehensive understanding of their ecological and health consequences, OPEs were adopted as replacements for PBDEs. This research aims to offer a comparative assessment of PBDEs and OPEs in various domains, specifically focusing on their persistence, bioaccumulation, and toxicity (PBT) properties. This study explored physicochemical properties (such as molecular weight, octanol-water partition coefficient, octanol-air partition coefficient, Henry's law constant, and vapor pressures), environmental behaviors, global concentrations in environmental matrices (air, water, and soil), toxicities, bioaccumulation, and trophic transfer mechanisms of both groups of compounds. Based on the comparison and analysis of environmental and toxicological data, we evaluate whether OPEs represent another instance of regrettable substitution and global contamination as much as PBDEs. Our findings indicate that the physical and chemical characteristics, environmental behaviors, and global concentrations of PBDEs and OPEs, are similar and overlap in many instances. Notably, OPE concentrations have even surged by orders of several magnitude compared to PBDEs in certain pristine regions like the Arctic and Antarctic, implying long-range transport. In many instances, air and water concentrations of OPEs have been increased than PBDEs. While the bioaccumulation factors (BAFs) of PBDEs (ranging from 4.8 to 7.5) are slightly elevated compared to OPEs (-0.5 to 5.36) in aquatic environments, both groups of compounds exhibit BAF values beyond the threshold of 5000 L/kg (log10 BAF > 3.7). Similarly, the trophic magnification factors (TMFs) for PBDEs (ranging from 0.39 to 4.44) slightly surpass those for OPEs (ranging from 1.06 to 3.5) in all cases. Metabolic biotransformation rates (LogKM) and hydrophobicity are potentially major factors deciding their trophic magnification potential. However, many compounds of PBDEs and OPEs show TMF values higher than 1, indicating biomagnification potential. Collectively, all data suggest that PBDEs and OPEs have the potential to bioaccumulate and transfer through the food chain. OPEs and PBDEs present a myriad of toxicity endpoints, with notable overlaps encompassing reproductive issues, oxidative stress, developmental defects, liver dysfunction, DNA damage, neurological toxicity, reproductive anomalies, carcinogenic effects, and behavior changes. Based on our investigation and comparative analysis, we conclude that substituting PBDEs with OPEs is regrettable based on PBT properties, underscoring the urgency for policy reforms and effective management strategies. Addressing this predicament before an exacerbation of global contamination is imperative.

Construction of type-II scheme SnO@HfC photocatalyst for bisphenol A degradation via peroxymonosulfate activation; DFT and self-cleaning analysis.

In this study, novel stannous oxide@hafnium carbide (SnO@HfC) nanocomposite was successfully manufactured by an appropriate hydrothermal scheme which was utilized for the photocatalytic degradation of BPA by stimulation of peroxymonosulfate (PMS) and self-cleaning application. Numerous methods were applied for the characterization of photocatalyst and demonstrated the successful preparation of SnO@HfC nanocomposite. The crystal structures, band structures and density of states for SnO and HfC were explored by DFT analysis. The amazing PMS stimulation performance of SnO@HfC nanocomposite originated from the establishment of a heterojunction, which led to the enhancement of the light response aptitude and the electron conduction competence of the composite. BPA was degraded by 0.75 g/L PMS and SnO@HfC at neutral pH during the period of 60 min. In order to identify active groups in the reaction procedure, quenching experiments and electron paramagnetic resonance (EPR) approaches were also used. In the subsequent active species scavenging assays, where sulfate radicals, hydroxyl radicals, holes, and superoxide radicals were engaged in the degradation of BPA. While, liquid phase mass spectrometry (LC-MS) was used to pinpoint the intermediate metabolites in the course of degradation. SnO@HfC/PMS/light system delivered excellent TOC removal efficiency and less ions leaching. The SnO@HfC nanocomposite proved good durability and reusability in continuous cycle tests along with excellent self-cleaning function on the glass substrate. The SnO@HfC nanocomposite performs admirably in terms of self-cleaning application. The SnO@HfC nanocomposite is expected to be used in the future for the treatment of wastewater that contains pharmaceuticals due to its superior stability and reusability after five consecutive cycles.

State, synthesis, perspective applications, and challenges of Graphdiyne and its analogues: A review of recent research.

Carbon materials technology provides the possibility of synthesizing low-cost, outstanding performance replacements to noble-metal catalysts for long-term use. Graphdiyne (GDY) is a carbon allotrope with an extremely thin atomic thickness. It consists of carbon elements, that are hybridized with both sp. and sp2, resulting in a multilayered two-dimensional (2D) configuration. Several functional models suggest, that GDY contains spontaneously existing band structure with Dirac poles. This is due to the non-uniform interaction among carbon atoms, which results from various fusions and overlapping of the 2pz subshell. Unlike other carbon allotropes, GDY has Dirac cone arrangements, that in turn give it inimitable physiochemical characteristics. These properties include an adjustable intrinsic energy gap, high speeds charging transport modulation efficiency, and exceptional conductance. Many scientists are interested in such novel, linear, stacked materials, including GDY. As a result, organized synthesis of GDY has been pursued, making it one of the first synthesized GDY materials. There are several methods to manipulate the band structure of GDY, including applying stresses, introducing boron/nitrogen loading, utilizing nanowires, and hydrogenations. The flexibility of GDY can be effectively demonstrated through the formation of nano walls, nanostructures, nanotube patterns, nanorods, or structured striped clusters. GDY, being a carbon material, has a wide range of applications owing to its remarkable structural and electrical characteristics. According to subsequent research, the GDY can be utilized in numerous energy generation processes, such as electrochemical water splitting (ECWS), photoelectrochemical water splitting (PEC WS), nitrogen reduction reaction (NRR), overall water splitting (OWS), oxygen reduction reaction (ORR), energy storage materials, lithium-Ion batteries (LiBs) and solar cell applications. These studies suggested that the use of GDY holds significant potential for the development and implementation of efficient, multimodal, and intelligent catalysts with realistic applications. However, the limitation of GDY and GDY-based composites for forthcoming studies are similarly acknowledged. The objective of these studies is to deliver a comprehensive knowledge of GDY and inspire further advancement and utilization of these unique carbon materials.

Different Dimensionalities, Morphological Advancements and Engineering of g-C3 N4 -Based Nanomaterials for Energy Conversion and Storage.

Graphitic carbon nitride (g-C3 N4 ) has gained tremendous interest in the sector of power transformation and retention, because of its distinctive stacked composition, adjustable electronic structure, metal-free feature, superior thermodynamic durability, and simple availability. Furthermore, the restricted illumination and extensive recombination of photoexcitation electrons have inhibited the photocatalytic performance of pure g-C3 N4 . The dimensions of g-C3 N4 may impact the field of electronics confinement; as a consequence, g-C3 N4 with varying dimensions shows unique features, making it appropriate for a number of fascinating uses. Even if there are several evaluations emphasizing on the fabrication methods and deployments of g-C3 N4 , there is certainly an insufficiency of a full overview, that exhaustively depicts the synthesis and composition of diverse aspects of g-C3 N4 . Consequently, from the standpoint of numerical simulations and experimentation, several legitimate methodologies were employed to deliberately develop the photocatalyst and improve the optimal result, including elements loading, defects designing, morphological adjustment, and semiconductors interfacing. Herein, this evaluation initially discusses different dimensions, the physicochemical features, modifications and interfaces design development of g-C3 N4 . Emphasis is given to the practical design and development of g-C3 N4 for the various power transformation and inventory applications, such as photocatalytic H2 evolution, photoreduction of CO2 source, electrocatalytic H2 evolution, O2 evolution, O2 reduction, alkali-metal battery cells, lithium-ion batteries, lithium-sulfur batteries, and metal-air batteries. Ultimately, the current challenges and potential of g-C3 N4 for fuel transformation and retention activities are explored.

Influence of habitats and physicochemical factors on trophic transfer processes of antibiotics in a freshwater ecosystem: Application of stable isotopes and human health risks.

Habitats of species and physicochemical factors are of great importance in determining the trophic transfer of contaminants in freshwater ecosystems. There is little information on how multiple physicochemical factors and habitats influence the trophic transfer of antibiotics in freshwater food webs. This study investigated the concentrations of 7 sulfonamides (SAs), 4 fluoroquinolones (FQs), 4 tetracyclines (TCs) and 2 macrolides (MLs) in the Lake Dianshan food web. Stable isotope analysis (SIA), and mathematical models were used to assign trophic levels and distinguish between the benthic food web (BFW) and pelagic food web (PFW). Values of stable nitrogen isotope (δ15N‰) and stable carbon isotope (δ13C‰) ranged from 10.2 ± 0.11 to 19.72 ± 0.05 and -33.67 ± 0.18 to -20.79 ± 0.50, respectively. Total concentrations of antibiotics ranged from 36.63 ± 12.73 ng/g dry weight (dw) to 105.85 ± 12.95 ng/g dw for all species. The relative abundance of antibiotics was in the following order: ∑FQs (36.49 %) > ∑SAs (26.70 %), >∑MLs (12.63 %) for all biotas. Trophic magnification factor (TMFs) values for individual antibiotics ranged from 0.10 to 1.20 and 0.31 to 1.82 for PFW and BFW, respectively. Three classes of antibiotics ∑FQs (p < 0.05), ∑TCs (p < 0.05), and ∑MLs (p < 0.05) showed significant trophic dilution in PFW, opposite to non-significant trophic dilution in BFW. The influence of various physicochemical factors was not strong over trophic transfer (e.g., octanol-water partition coefficient-LogKow (r = -0.05 in PFW, r = -0.14 in BFW) and distribution coefficient-LogD (r = 0.06 in PWF, r = -0.28 in BFW)) except for aqueous solubility (LogS). Results indicated a significantly higher trophic dilution of antibiotics in the PFW than in the BFW. Among the studied six physicochemical factors, only LogS significantly influences (p < 0.05) the trophic transfer of antibiotics in the freshwater food web. Health risk assessments indicated that currently, there were no serious risks present for urban and rural populations.

Recent Advances and Future Perspectives of Metal-Based Electrocatalysts for Overall Electrochemical Water Splitting.

Recently, the growing demand for a renewable and sustainable fuel alternative is contingent on fuel cell technologies. Even though it is regarded as an environmentally sustainable method of generating fuel for immediate concerns, it must be enhanced to make it extraordinarily affordable, and environmentally sustainable. Hydrogen (H2 ) synthesis by electrochemical water splitting (ECWS) is considered one of the foremost potential prospective methods for renewable energy output and H2 society implementation. Existing massive H2 output is mostly reliant on the steaming reformation of carbon fuels that yield CO2 together with H2 and is a finite resource. ECWS is a viable, efficient, and contamination-free method for H2 evolution. Consequently, developing reliable and cost-effective technology for ECWS was a top priority for scientists around the globe. Utilizing renewable technologies to decrease total fuel utilization is crucial for H2 evolution. Capturing and transforming the fuel from the ambient through various renewable solutions for water splitting (WS) could effectively reduce the need for additional electricity. ECWS is among the foremost potential prospective methods for renewable energy output and the achievement of a H2 -based economy. For the overall water splitting (OWS), several transition-metal-based polyfunctional metal catalysts for both cathode and anode have been synthesized. Furthermore, the essential to the widespread adoption of such technology is the development of reduced-price, super functional electrocatalysts to substitute those, depending on metals. Many metal-premised electrocatalysts for both the anode and cathode have been designed for the WS process. The attributes of H2 and oxygen (O2 ) dynamics interactions on the electrodes of water electrolysis cells and the fundamental techniques for evaluating the achievement of electrocatalysts are outlined in this paper. Special emphasis is paid to their fabrication, electrocatalytic performance, durability, and measures for enhancing their efficiency. In addition, prospective ideas on metal-based WS electrocatalysts based on existing problems are presented. It is anticipated that this review will offer a straight direction toward the engineering and construction of novel polyfunctional electrocatalysts encompassing superior efficiency in a suitable WS technique.

A Targeted Review of Current Progress, Challenges and Future Perspective of g-C3 N4 based Hybrid Photocatalyst Toward Multidimensional Applications.

The increasing demand for searching highly efficient and robust technologies in the context of sustainable energy production totally rely onto the cost-effective energy efficient production technologies. Solar power technology in this regard will perceived to be extensively employed in a variety of ways in the future ahead, in terms of the combustion of petroleum-based pollutants, CO2 reduction, heterogeneous photocatalysis, as well as the formation of unlimited and sustainable hydrogen gas production. Semiconductor-based photocatalysis is regarded as potentially sustainable solution in this context. g-C3 N4 is classified as non-metallic semiconductor to overcome this energy demand and enviromental challenges, because of its superior electronic configuration, which has a median band energy of around 2.7 eV, strong photocatalytic stability, and higher light performance. The photocatalytic performance of g-C3 N4 is perceived to be inadequate, owing to its small surface area along with high rate of charge recombination. However, various synthetic strategies were applied in order to incorporate g-C3 N4 with different guest materials to increase photocatalytic performance. After these fabrication approaches, the photocatalytic activity was enhanced owing to generation of photoinduced electrons and holes, by improving light absorption ability, and boosting surface area, which provides more space for photocatalytic reaction. In this review, various metals, non-metals, metals oxide, sulfides, and ferrites have been integrated with g-C3 N4 to form mono, bimetallic, heterojunction, Z-scheme, and S-scheme-based materials for boosting performance. Also, different varieties of g-C3 N4 were utilized for different aspects of photocatalytic application i. e., water reduction, water oxidation, CO2 reduction, and photodegradation of dye pollutants, etc. As a consequence, we have assembled a summary of the latest g-C3 N4 based materials, their uses in solar energy adaption, and proper management of the environment. This research will further well explain the detail of the mechanism of all these photocatalytic processes for the next steps, as well as the age number of new insights in order to overcome the current challenges.

2D-2D heterostructure g-C3N4-based materials for photocatalytic H2 evolution: Progress and perspectives.

Photocatalytic hydrogen generation from direct water splitting is recognized as a progressive and renewable energy producer. The secret to understanding this phenomenon is discovering an efficient photocatalyst that preferably uses sunlight energy. Two-dimensional (2D) graphitic carbon nitride (g-C3N4)-based materials are promising for photocatalytic water splitting due to special characteristics such as appropriate band gap, visible light active, ultra-high specific surface area, and abundantly exposed active sites. However, the inadequate photocatalytic activity of pure 2D layered g-C3N4-based materials is a massive challenge due to the quick recombination between photogenerated holes and electrons. Creating 2D heterogeneous photocatalysts is a cost-effective strategy for clean and renewable hydrogen production on a larger scale. The 2D g-C3N4-based heterostructure with the combined merits of each 2D component, which facilitate the rapid charge separation through the heterojunction effect on photocatalyst, has been evidenced to be very effective in enhancing the photocatalytic performance. To further improve the photocatalytic efficiency, the development of novel 2D g-C3N4-based heterostructure photocatalysts is critical. This mini-review covers the fundamental concepts, recent advancements, and applications in photocatalytic hydrogen production. Furthermore, the challenges and perspectives on 2D g-C3N4-based heterostructure photocatalysts demonstrate the future direction toward sustainability.

Recent advancement in conjugated polymers based photocatalytic technology for air pollutants abatement: Cases of CO2, NOx, and VOCs.

According to World Health Organization (WHO) survey, air pollution has become the major reason of several fatal diseases, which had led to the death of 7 million peoples around the globe. The 9 people out of 10 breathe air, which exceeds WHO recommendations. Several strategies are in practice to reduce the emission of pollutants into the air, and also strict industrial, scientific, and health recommendations to use sustainable green technologies to reduce the emission of contaminants into the air. Photocatalysis technology recently has been raised as a green technology to be in practice towards the removal of air pollutants. The scientific community has passed a long pathway to develop such technology from the material, and reactor points of view. Many classes of photoactive materials have been suggested to achieve such a target. In this context, the contribution of conjugated polymers (CPs), and their modification with some common inorganic semiconductors as novel photocatalysts, has never been addressed in literature till now for said application, and is critically evaluated in this review. As we know that CPs have unique characteristics compared to inorganic semiconductors, because of their conductivity, excellent light response, good sorption ability, better redox charge generation, and separation along with a delocalized π-electrons system. The advances in photocatalytic removal/reduction of three primary air-polluting compounds such as CO2, NOX, and VOCs using CPs based photocatalysts are discussed in detail. Furthermore, the synergetic effects, obtained in CPs after combining with inorganic semiconductors are also comprehensively summarized in this review. However, such a combined system, on to better charges generation and separation, may make the Adsorb & Shuttle process into action, wherein, CPs may play the sorbing area. And, we hope that, the critical discussion on the further enhancement of photoactivity and future recommendations will open the doors for up-to-date technology transfer in modern research.

Recent Advancement in Rational Design Modulation of MXene: A Voyage from Environmental Remediation to Energy Conversion and Storage.

Use of MXenes (Ti3 C2 Tx ), which belongs to the family of two-dimensional transition metal nitrides and carbides by encompassing unique combination of metallic conductivity and hydrophilicity, is receiving tremendous attention, since its discovery as energy material in 2011. Owing to its precursor selective chemical etching, and unique intrinsic characteristics, the MXene surface properties are further classified into highly chemically active compound, which further produced different surface functional groups i. e., oxygen, fluorine or hydroxyl groups. However, the role of surface functional groups doesn't not only have a significant impact onto its electrochemical and hydrophilic characteristics (i. e., ion adsorption/diffusion), but also imparting a noteworthy effect onto its conductivity, work function, electronic structure and properties. Henceforth, such kind of inherent chemical nature, robust electrochemistry and high hydrophilicity ultimately increasing the MXene application as a most propitious material for overall environment-remediation, electrocatalytic sensors, energy conversion and storage application. Moreover, it is well documented that the role of MXenes in all kinds of research fields is still on a progress stage for their further improvement, which is not sufficiently summarized in literature till now. The present review article is intended to critically discuss the different chemical aptitudes and the diversity of MXenes and its derivates (i. e., hybrid composites) in all aforesaid application with special emphasis onto the improvement of its surface characteristics for the multidimensional application. However, this review article is anticipated to endorse MXenes and its derivates hybrid configuration, which is discussed in detail for emerging environmental decontamination, electrochemical use, and pollutant detection via electrocatalytic sensors, photocatalysis, along with membrane distillation and the adsorption application. Finally, it is expected, that this review article will open up new window for the effective use of MXene in a broad range of environmental remediation, energy conversion and storage application as a novel, robust, multidimensional and more proficient materials.

Synergetic effect of bismuth vanadate over copolymerized carbon nitride composites for highly efficient photocatalytic H2 and O2 generation.

The development of copolymerized carbon nitride (CN)-based photocatalysts may support advances in photocatalytic overall water splitting. However, the recombination of charge carriers is the main bottleneck that reduces its overall photocatalytic activity. To overcome this problem, the construction of heterojunction technology has emerged as an effective approach to reduce the charge carrier recombination, thereby improving charge separation and transport efficiency. In this work, an innovative heterojunction was prepared between Quinolinic acid (QA) modified CN (CN-QAx) and novel nanorod-shaped bismuth vanadate (BiVO4) (BiVO4/CN-QAx) for overall water splitting through a simple in-situ solvent evaporation technique. The obtained results show that the synthesized samples have efficient and improved activities for releasing H2 (862.1 µmol/h) and O2 (31.58 µmol/h) under visible light irradiation. Furthermore, an exceptional apparent quantum yield (AQY) of 64.52 % has been recorded for BiVO4/CN-QA7.0 at 420 nm, which might be due to the substantial isolation of photoinducedcharge carriers. Therefore, this work opens up a new channel toward efficient CN-based photocatalysts in the sustainable energy production processes.

Enhanced photocatalytic overall water splitting from an assembly of donor-π-acceptor conjugated polymeric carbon nitride.

Well-organized water splitting semiconducting photocatalyst is an important concept, but stimulating aimed at decisive energy and environmental emergencies. In this context, visible light-based photocatalytic water splitting with low-dimensional semiconducting materials is proposed to produce sustainable energy. Here we optimized the sequential of organic electron-rich heterocyclic monomer namely benzothiadiazole (BTD) quenched within polymeric carbon nitride (PCN) semiconductor via copolymerization, thereby assembling a sanctum of donor-π-acceptor (D-π-A) photocatalysts. The selection of BTD is based on the benzene ring, which consequently anticipating a π cross-linker unit for hydrogen and oxygen evolution. A hydrogen evolution rates (HER) of 88.2 µmol/h for pristine PCN and 744.2 µmol/h for PCN-BTD008 (eight times higher than pure PCN) are observed. Additionally, a remarkable apparent quantum yield (AQY) of about 58.6% at 420 nm has been observed for PCN-BTD008. Likewise, the oxygen evolution rate (OER) data reflect the generation of 0.2 µmol/h1 (visible) and 1.6 µmol/h1 (non-visible) for pure PCN. Though, OER of PCN-BTD008 is found to be 2.2 µmol/h1 (visible) and 14.8 µmol/h1 (non-visible), which are economically better than pure PCN. As such, the results show an important step toward modifying the design and explain a vital part of the D-π-A scheme at a balanced theme for fruitful photocatalysts intended for future demand.

Sustainable development goals under threat? Multidimensional impact of COVID-19 on our planet and society outweigh short term global pollution reduction.

The Sustainable Development Goals (SDGs) call on all nations to accomplish 17 broad global development goals by 2030. However, the COVID-19 pandemic presents a challenging period in human history, causing large-scale impacts on society and the environment as governments shift priorities and divert funding in response to this pandemic. Through a literature survey and data acquirement from various international organizations (e.g. United Nations and European Space Agency), this manuscript is intended to provide critical insights into the impacts of the COVID-19 pandemic on the SDGs. We briefly describe this pandemic's positive and short-term effects on the environment, followed by a critical evaluation of its potential long-term impacts on the environment, society, and the SDGs. On the basis of COVID-19 effects, the SDGs are classified into three categories: directly-affected SDGs, indirectly-affected SDGs, and a stand-alone category. The COVID-19-induced lockdowns and restrictions resulted in a short-term decline in environmental pollution and greenhouse gases (GHG) emissions, providing valuable data for climate advocates and researchers. These positive impacts were essentially temporary due to the synchronized global response to the pandemic. The halted focus on the progress of the SDGs greatly impacts the global green transition to a healthy and sustainable world. COVID-19 threatens to impede the progress toward a prosperous, environment-friendly, and sustainable global development in multiple ways. These multi-dimensional threats have been critically evaluated, along with a description of potential solutions to curtail the adverse effects of COVID-19 on the SDGs. Considering the limited data regarding the impacts of the pandemic on the SDGs, diverse collaborative studies at the regional and global levels are recommended.

Recent advances of bismuth titanate based photocatalysts engineering for enhanced organic contaminates oxidation in water: A review.

Over more than three decades, the scientific community has been contentiously interested in structuring varying photocatalytic materials with unique properties for appropriate technology transfer. Most of the existing reported photocatalysts in the literature show pros and cons by considering the type of application and working conditions. Bismuth titanate oxides (BTO) are novel photocatalysts that raised recently towards energy and environmental-related applications. Most recent advances to developing bismuth titanate-based photocatalysts for the oxidation of organic pollutants in the water phase were reviewed in this report. To counter the potential drawbacks of BTO materials, i.e., rapid recombination of photoproduced charges, and further promote the photoactivity, most reported approaches were discussed, including creating direct Z-scheme junctions, conventional heterojunctions, metal/non-metal doping, coupling with carbon materials, surface modification and construction of oxygen vacancies. In the end, the review addresses the future trends for better engineering and application of BTO based photocatalysts towards the photodegradation of organic pollutants in water under controlled lab and large scales conditions.

Synthesis and characterization of arginine-doped heliotrope leaves with high clean-up capacity for crystal violet dye from aqueous media.

A novel arginine-modified Heliotrope leaf (Arg@HL) was used as adsorbent for the crystal violet (CV) dye adsorption in a batch process. The physicochemical and morphological composition of Arg@HL were characterized by field-emission scanning electron microscopy (FE-SEM), Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). The experiments were carried out to investigate the factors that influence the dye uptake by the adsorbent, such as the contact time under agitation, adsorbent amount, initial dye concentration, temperature and pH of dye solution. The optimum conditions of adsorption were found on the batch scale as followed: CV concentration of 20 mg·L-1, an amount of 0.75 g·L-1 of the adsorbent, 90 min contact time, 6 pH and 25 °C temperature for Arg@HL. The results confirmed a second-order model explaining the dye crystal violet's adsorption's kinetics by Arg-Heliotrope leaves. The Langmuir model effectively defines the adsorption isotherms. The results revealed that the Arg@HL has the potential to be used as a low-cost adsorbent for the removal of CV dye from aqueous solutions.

Investigation of textile dyeing effluent using activated sludge system to assess the removal efficiency.

In this current work, the performance of an aerobic granular sludge (AGS) for real textile wastewater was investigated based on system operational parameters evaluation. The study was performed for 90 days, and sampling was done once a week in which textile dyeing effluent from the textile mill was collected and subjected to laboratory-scale treatment. The samples from the inlet, the outlet of the wastewater plant, and within the bioreactor were collected at various concentrations of mixed liquid suspended solids (MLSS), and hydraulic retention remained the same in the investigated period of 53 h. The objective of this study was to analyze the AGS system performance assessment by evaluating the effect of different MLSS concentrations on chemical oxygen demand (COD), total suspended solids (TSS), and oil/grease removal from real-based textile water. The results showed that removal of organic material from the process water increases with an increase in MLSS concentration in the bioreactor and gradually shifts removal of COD from 91.2% to 94.5%. As the concentration of microorganisms in the reactor (aeration tank) increases, the degradation of waste organics in the wastewater increases as well. Moreover, the % removal of TSS (83.5% to 98%) and removal of oil/grease (62.5% to 76.4%) were also increased. These results ultimately suggest that the utilization of an activated sludge system can effectively treat complex and highly polluted denim textile wastewater to avoid secondary pollution posed by this industry. PRACTITIONER POINTS: The effectiveness of aerobic granular sludge was investigated for industrial textile effluent. The increase in MLSS results in increase of % COD removal efficiency to 94.5%. The AGS system can efficiently treat complicated and highly contaminated textile wastewater.