Neat monolayer tiling of molecularly thin two-dimensional materials in 1 min.

Controlled arrangement of molecularly thin two-dimensional (2D) materials on a substrate, particularly into precisely organized mono- and multilayer structures, is a key to design a nanodevice using their unique and enhanced physical properties. Several techniques such as mechanical transfer process and Langmuir-Blodgett deposition have been applied for this purpose, but they have severe restrictions for large-scale practical applications, for example, limited processable area and long fabrication time, requiring skilled multistep operations. We report a facile one-pot spin-coating method to realize dense monolayer tiling of various 2D materials, such as graphene and metal oxide nanosheets, within 1 min over a wide area (for example, a 30-mmφ substrate). Centrifugal force drives the nanosheets in a thin fluid layer to the substrate edge where they are packed edge to edge all the way to the central region, without forming overlaps. We investigated the relationship between precursor concentration, rotation speed, and ultraviolet-visible absorbance and developed an effective method to optimize the parameters for neat monolayer films. The multilayer buildup is feasible by repeating the spin-coating process combined with a heat treatment at moderate temperature. This versatile solution-based technique will provide both fundamental and practical advancements in the rapid large-scale production of artificial lattice-like films and nanodevices based on 2D materials.

Atomic Layer Engineering of High-κ Ferroelectricity in 2D Perovskites.

Complex perovskite oxides offer tremendous potential for controlling their rich variety of electronic properties, including high-TC superconductivity, high-κ ferroelectricity, and quantum magnetism. Atomic-scale control of these intriguing properties in ultrathin perovskites is an important challenge for exploring new physics and device functionality at atomic dimensions. Here, we demonstrate atomic-scale engineering of dielectric responses using two-dimensional (2D) homologous perovskite nanosheets (Ca2Nam-3NbmO3m+1; m = 3-6). In this homologous 2D material, the thickness of the perovskite layers can be incrementally controlled by changing m, and such atomic layer engineering enhances the high-κ dielectric response and local ferroelectric instability. The end member (m = 6) attains a high dielectric constant of ∼470, which is the highest among all known dielectrics in the ultrathin region (<10 nm). These results provide a new strategy for achieving high-κ ferroelectrics for use in ultrascaled high-density capacitors and post-graphene technology.

High thermal robustness of molecularly thin perovskite nanosheets and implications for superior dielectric properties.

A systematic study has been conducted to examine the thermal stability of layer-by-layer assembled films of perovskite-type nanosheets, (Ca2Nb3O10(-))n (n = 1-10), which exhibit superior dielectric and insulating properties. In-plane and out-of-plane X-ray diffraction data as well as observations by atomic force microscopy and transmission electron microscopy indicated the high thermal robustness of the nanosheet films. In a monolayer film with an extremely small thickness of ∼2 nm, the nanosheet was stable up to 800 °C, the temperature above which segregation into CaNb2O6 and Ca2Nb2O7 began. The critical temperature moderately decreased as the film thickness, or the number of nanosheet layers, increased, and reached 700 °C for seven- and 10-layer films, which is comparable to the phase transformation temperature for a bulk phase of the protonic layered oxide of HCa2Nb3O10·1.5H2O as a precursor of the nanosheet. This thermal stabilization of perovskite-type nanosheets should be associated with restricted nucleation and crystal growth peculiar to such ultrathin 2D bound systems. The stable high-k dielectric response (εr = 210) and highly insulating nature (J < 10(-7) A cm(-2)) remained substantially unchanged even after the nanosheet film was annealed up to 600 °C. This study demonstrates the high thermal stability of 2D perovskite-type niobate nanosheets in terms of structure and dielectric properties, which suggests promising potential for future high-k devices operable over a wide temperature range.

All-nanosheet ultrathin capacitors assembled layer-by-layer via solution-based processes.

All-nanosheet ultrathin capacitors of Ru0.95O20.2-/Ca2Nb3O10-/Ru0.95O20.2- were successfully assembled through facile room-temperature solution-based processes. As a bottom electrode, conductive Ru0.95O20.2- nanosheets were first assembled on a quartz glass substrate through a sequential adsorption process with polycations. On top of the Ru0.95O20.2- nanosheet film, Ca2Nb3O10- nanosheets were deposited by the Langmuir-Blodgett technique to serve as a dielectric layer. Deposition parameters were optimized for each process to construct a densely packed multilayer structure. The multilayer buildup process was monitored by various characterizations such as atomic force microscopy (AFM), ultraviolet-visible absorption spectra, and X-ray diffraction data, which provided compelling evidence for regular growth of Ru0.95O20.2- and Ca2Nb3O10- nanosheet films with the designed multilayer structures. Finally, an array of circular films (50 µm ϕ) of Ru0.95O20.2- nanosheets was fabricated as top electrodes on the as-deposited nanosheet films by combining the standard photolithography and sequential adsorption processes. Microscopic observations by AFM and cross-sectional transmission electron microscopy, as well as nanoscopic elemental analysis, visualized the sandwich metal-insulator-metal structure of Ru0.95O20.2-/Ca2Nb3O10-/Ru0.95O20.2- with a total thickness less than 30 nm. Electrical measurements indicate that the system really works as an ultrathin capacitor, achieving a capacitance density of ∼27.5 µF cm(-2), which is far superior to currently available commercial capacitor devices. This work demonstrates the great potential of functional oxide nanosheets as components for nanoelectronics, thus contributing to the development of next-generation high-performance electronic devices.

Unusually stable ~100-fold reversible and instantaneous swelling of inorganic layered materials.

Cells can swell or shrink in certain solutions; however, no equivalent activity has been observed in inorganic materials. Although lamellar materials exhibit increased volume with increase in the lamellar period, the interlamellar expansion is usually limited to a few nanometres, with a simultaneous partial or complete exfoliation into individual atomic layers. Here we demonstrate a large monolithic crystalline swelling of layered materials. The gallery spacing can be instantly increased ~100-fold in one direction to ~90 nm, with the neighbouring layers separated primarily by H2O. The layers remain strongly held without peeling or translational shifts, maintaining a nearly perfect three-dimensional lattice structure of >3,000 layers. First-principle calculations yield a long-range directional structuring of the H2O molecules that may help to stabilize the highly swollen structure. The crystals can also instantaneously shrink back to their original sizes. These findings provide a benchmark for understanding the exfoliating layered materials.

Photochromogenic nanosheet crystallites of tungstate with a 2D bronze structure.

Layered rubidium tungstate, Rb(4)W(11)O(35), with a two-dimensional (2D) bronze-type tunnel structure was successfully delaminated into colloidal nanosheets via a soft-chemical process involving acid exchange and subsequent intercalation of tetrabutylammonium ions. Characterizations by transmission electron microscopy and atomic force microscopy confirmed the formation of unilamellar 2D nanosheet crystallites with a unique thickness of ∼3 nm and an average lateral size of 400 nm. The obtained nanosheets exhibited reversible color change upon UV-light excitation via an optical band gap of 3.5 eV. The ultimate 2D aspect ratio favorable for an adsorption of charge-compensating cations to trapped electrons working as a color center is presumably responsible for highly efficient photochromic behavior. Its coloration mainly consists of a broad band at a wavelength of 1800 nm and longer, which is much different from that of the common tungstate nanomaterials. Thus, the chromogenic nanosheet obtained in this study features the intense UV absorption and optically switchable visible-to-IR absorption, which may be useful for window applications such as cutoff filters and heat-absorbing films.

Engineered interfaces of artificial perovskite oxide superlattices via nanosheet deposition process.

Combining different materials into desired superlattice structures can produce new electronic states at the interface and the opportunity to create artificial materials with novel properties. Here we introduce a new, rather unexpected, and yet simple way to such a superlattice assembly of perovskite oxides: in the Dion-Jacobson phase, a model system of layered perovskites, high-quality bicolor perovskite superlattices (LaNb(2)O(7))(nL)(Ca(2)Nb(3)O(10))(nC) are successfully fabricated by a layer-by-layer assembly using two different perovskite nanosheets (LaNb(2)O(7) and Ca(2)Nb(3)O(10)) as a building block. The artificially fabricated (LaNb(2)O(7)/Ca(2)Nb(3)O(10)) superlattices are structurally unique, which is not feasible to create in the bulk form. By such an artificial structuring, we found that (LaNb(2)O(7)/Ca(2)Nb(3)O(10)) superlattices possess a new form of interface coupling, which gives rise to ferroelectricity.

Robust high-κ response in molecularly thin perovskite nanosheets.

Size-induced suppression of permittivity in perovskite thin films is a fundamental problem that has remained unresolved for decades. This size-effect issue becomes increasingly important due to the integration of perovskite nanofilms into high-κ capacitors, as well as concerns that intrinsic size effects may limit their device performance. Here, we report a new approach to produce robust high-κ nanodielectrics using perovskite nanosheet (Ca2Nb3O10), a new class of nanomaterials that is derived from layered compounds by exfoliation. By a solution-based bottom-up approach using perovskite nanosheets, we have successfully fabricated multilayer nanofilms directly on SrRuO3 or Pt substrates without any interfacial dead layers. These nanofilms exhibit high dielectric constant (>200), the largest value seen so far in perovskite films with a thickness down to 10 nm. Furthermore, the superior high-κ properties are a size-effect-free characteristic with low leakage current density (<10(-7) A cm(-2)). Our work provides a key for understanding the size effect and also represents a step toward a bottom-up paradigm for future high-κ devices.

Construction of highly ordered lamellar nanostructures through Langmuir-Blodgett deposition of molecularly thin titania nanosheets tens of micrometers wide and their excellent dielectric properties.

Exfoliated unilamellar titania nanosheets of Ti(0.87)O(2) with a lateral size of 10-30 microm were deposited layer-by-layer onto various substrates by Langmuir-Blodgett procedure to produce a highly ordered lamellar nanofilms. The nanosheets dispersed in an aqueous suspension containing quaternary ammonium ions as a supporting electrolyte floated spontaneously at the air/liquid interface, and they were successfully transferred onto the substrate after surface compression. Neat tiling of the nanosheets could be realized at an optimized surface pressure. The film thus obtained was exposed to UV light to turn the substrate surface hydrophilic, which was helpful for stable repetition of monolayer deposition. Layer-by-layer growth was confirmed by UV-visible absorption spectra, which showed progressive enhancement of an absorption band due to the nanosheet. Cross-sectional transmission electron microscopy images visualized the ultrathin film homogeneously deposited on the substrate surface and a lamellar fringe of the layer-by-layer assembled nanosheets was clearly resolved at a higher magnification. X-ray diffraction data on the films showed sharp basal reflections up to the seventh order, and Williamson-Hall analysis of the pattern indicated that the film was coherent across the total thickness with respect to X-ray and that the lattice strain was extremely small. In addition, the first basal reflection was accompanied by small satellite peaks, which are accounted for by the Laue interference function. All these features clearly indicate the formation of a highly ordered lamellar nanostructure of the titania nanosheets comparable to artificial lattice films produced via modern vapor-phase deposition processes. The obtained films showed superior dielectric and insulating properties as a reflection of the highly organized film nanoarchitecture.

Exfoliated nanosheet crystallite of cesium tungstate with 2D pyrochlore structure: synthesis, characterization, and photochromic properties.

Layered cesium tungstate, Cs(6+x)W(11)O(36), with two-dimensional (2D) pyrochlore structure was exfoliated into colloidal unilamellar sheets through a soft-chemical process. Interlayer Cs ions were replaced with protons by acid exchange, and quaternary ammonium ions were subsequently intercalated under optimized conditions. X-ray diffraction (XRD) measurements on gluelike sediment recovered from the colloidal suspension by centrifugation showed a broad pattern of a pronounced wavy profile, which closely matched the square of calculated structure factor for the single host layer. This indicates the total delamination of the layered tungstate into nanosheets of Cs(4)W(11)O(36)(2-). Microscopic observations by transmission electron microscopy and atomic force microscopy clearly revealed the formation of unilamellar crystallites with a very high 2D anisotropy, a thickness of only approximately 2 nm versus lateral size up to several micrometers. In-plane XRD analysis confirmed that the 2D pyrochlore structure was retained. The colloidal cesium tungstate nanosheet showed strong absorption of UV light with sharp onset, suggesting a semiconducting nature. Analysis of the absorption profile provided 3.6 eV as indirect band gap energy, which is 0.8 eV larger than that of the bulk layered precursor, probably due to size quantization. The nanosheet exhibited highly efficient photochromic properties, showing reversible color change upon UV irradiation.

Photoelectrochemical properties of alternating multilayer films composed of titania nanosheets and Zn porphyrin.

Alternating multilayer films composed of titania nanosheets and Zn porphyrins were prepared by use of a previously reported Langmuir-Blodgett film-transfer method in order to fabricate photoelectrochemical devices. Closely packed titania nanosheet monolayers on indium tin oxide (ITO), mica, and quartz surfaces strongly adsorbed cationic [5,10,15,20-tetrakis(1-methylpyridinium-4-yl)porphyrinatozinc]4+ (ZnTMPyP4+) by electrostatic interactions. The alternating deposition process afforded nanometer-scale multilayer films with the following structure: solid surface/(titania nanosheet/ZnTMPyP4+)n (n is the number of layers). The multilayer films were characterized by various physical measurements, including AFM, XRD, and UV-visible spectra. The visible-light irradiation of this multilayer film on an ITO electrode in the presence of triethanolamine as an electron donor yielded an anodic photocurrent. The action spectrum was consistent with the absorption spectrum of ZnTMPyP4+, which indicates that the photoexcitation of ZnTMPyP4+ is responsible for the photocurrent generation. However, the photocurrent density decreased with an increasing number of layers, which indicates that the harvesting of photoexcited electrons vertically through the titania nanosheets in the ITO/(titania nanosheet/ZnTMPyP4+)n structure was not efficient. To overcome this problem, the use of a lateral interlayer connection to all of the titania nanosheets with Ag paste was examined. As a result, a dramatic improvement in the photocurrent density was obtained. Thus, for efficient photocurrent generation with the titania nanosheet-ZnTMPyP4+ composite material, the lateral connection to all of the titania nanosheet layers is effective.

Humidity-sensitive electrical conductivity of a Langmuir-Blodgett film of titania nanosheets: surface modification as induced by light irradiation under humid conditions.

Electrical conductivity of titania nanosheets was investigated for a single-layered Langmuir-Blodgett (LB) film deposited onto a comb-type electrode (5 or 10 microm (electrode spacing) x 8 mm (electrode width)). The photoresponsive electrical properties of the film were investigated by irradiating with a Xe lamp under various atmospheric conditions. The atmosphere was controlled by introducing either oxygen or nitrogen gases containing different amounts of water vapor. As a result, the LB film behaved as an insulator with little photoresponse under dry atmospheric conditions. It became conductive on illuminating with a Xe lamp under a wet oxygen atmosphere. Conductivity increased with the increase of irradiation time (0-30 min) to attain a stationary value in 1 h. The highest conductive state thus attained lasted for several hours in the dark. The impedance of the film was measured over the frequency range of 1 MHz to 50 Hz by varying the relative humidity of an atmosphere from 0 to 100%. The results were analyzed by assuming an equivalent circuit consisting of one resistance (R) with constant Warburg component (W) and one capacitance (C) in parallel. The R component depended remarkably on the relative humidity, while the C component stayed nearly at the constant value. The dependence of R on water vapor (PH2O) was expressed by R = A[PH2O]n with A = constant and n = -2.9. The results were rationalized in terms of the surface modification of titania nanosheets to hydrophilic nature under the illumination of UV light.

Fabrication of densely packed titania nanosheet films on solid surface by use of Langmuir-Blodgett deposition method without amphiphilic additives.

Densely packed exfoliated nanosheet films such as Ti0.91O2, Ti0.8M0.2O2 (M = Co, Ni), Ti0.6Fe0.4O2, and Ca2Nb3O10 on solid substrates were prepared by the LB transfer method without any amphiphilic additives at the air-water interface. Nanosheet crystallites covered nearly 95% on the solid surface with minimum overlapping of nanosheets. The LB transfer method of the Ti0.91O2 nanosheet monolayer film is applicable for not only hydrophilic substrates such as quartz, silicon, indium-tin oxide (ITO), and glass but also the hydrophobic Au surface. On the basis of these points, the LB transfer method has advantages compared to the alternating layer-by-layer method, which makes use of oppositely charged polyelectrolytes such as poly(ethylenimine) (PEI). Adsorption of hydrophobic Ti0.91O2 nanosheets at the air-water interface is responsible for this LB transfer deposition method. The addition of tetrabutylammonium bromide into the subphase assisted the adsorption, causing an increase in the adsorbed amount of Ti0.91O2 nanosheets at the air-water interface.