Spin-Selective Angular Dispersion Control in Dielectric Metasurfaces for Multichannel Meta-Holographic Displays.

Angle-dependent next-generation displays have potential applications in 3D stereoscopic and head-mounted displays, image combiners, and encryption for augmented reality (AR) and security. Metasurfaces enable such exceptional functionalities with groundbreaking achievements in efficient displays over the past decades. However, limitations in angular dispersion control make them unfit for numerous nanophotonic applications. Here, we propose a spin-selective angle-dependent all-dielectric metasurface with a unique design strategy to manifest distinct phase information at different incident angles of light. As a proof of concept, the phase masks of two images are encoded into the metasurface and projected at the desired focal plane under different angles of left circularly polarized (LCP) light. Specifically, the proposed multifunctional metasurface generates two distinct holographic images under LCP illumination at angles of +35 and -35°. The presented holographic displays may provide a feasible route toward multifunctional meta-devices for potential AR displays, encrypted imaging, and information storage applications.

Millimeter-wave generation based on a monolithic dual-wavelength DFB laser with four phase-shifted sampled gratings and equivalent chirp technology.

A dual-wavelength DFB laser array based on four phase-shifted grating and equivalent chirp technology is first proposed, fabricated, and experimentally demonstrated. The dual-wavelength emitting is achieved by symmetrically introducing two π phase shifts into a chirped four phase-shifted sampled grating cavity. Meanwhile, the beating signal of the dual-wavelength output is stabilized by applying an electro-absorption modulator integrated at the rear of the cavity. Under different grating chirp rates, a series of RF signals from 66.8 GHz to 73.6 GHz with a linewidth of less than 210 kHz is obtained.

Dielectric chiral metasurfaces for enhanced circular dichroism spectroscopy at near infrared regime.

Numerous applications of chiro-optical effects can be found in nanophotonics, including imaging and spin-selective absorption, particularly in sensing for separating and detecting chiral enantiomers. Flat single-layer metasurfaces composed of chiral or achiral sub-wavelength structures offer unique properties to manipulate the light due to their extraordinary light-matter interaction. However, at optical wavelengths, the generation of strong chirality is found to be challenging via conventional chiral metasurface approaches. This work intends to design and optimize a dielectric chiral meta-nano-surface based on a diatomic design strategy to comprehend giant chiro-optical effects in the near-infrared (NIR) regime for potential application in circular dichroism (CD) spectroscopy. Instead of using a single chiral structure that limits the CD value at optical wavelengths, the proposed metasurface used a diatomic (two meta-atoms with distinct geometric parameters) chiral structure as a building block to significantly enhance the chiro-optical effect. Combining both meta-atoms in a single periodicity of the building block introduces constructive and destructive interferences to attain the maximum circular dichroism value exceeding 75%. Moreover, using multipolar resonance theory, the physics behind the generation of giant chiro-optical effects have also been investigated. The proposed dielectric chiral meta-platform based on the extra degree of freedom can find application in compact integrated optical setups for CD spectroscopy, enantiomer separation and detection, spin-dependent color filters, and beam splitters.

Spin-isolated ultraviolet-visible dynamic meta-holographic displays with liquid crystal modulators.

Wearable displays or head-mounted displays (HMDs) have the ability to create a virtual image in the field of view of one or both eyes. Such displays constitute the main platform for numerous virtual reality (VR)- and augmented reality (AR)-based applications. Meta-holographic displays integrated with AR technology have potential applications in the advertising, media, and healthcare sectors. In the previous decade, dielectric metasurfaces emerged as a suitable choice for designing compact devices for highly efficient displays. However, the small conversion efficiency, narrow bandwidth, and costly fabrication procedures limit the device's functionalities. Here, we proposed a spin-isolated dielectric multi-functional metasurface operating at broadband optical wavelengths with high transmission efficiency in the ultraviolet (UV) and visible (Vis) regimes. The proposed metasurface comprised silicon nitride (Si3N4)-based meta-atoms with high bandgap, i.e., ∼ 5.9 eV, and encoded two holographic phase profiles. Previously, the multiple pieces of holographic information incorporated in the metasurfaces using interleaved and layer stacking techniques resulted in noisy and low-efficiency outputs. A single planar metasurface integrated with a liquid crystal was demonstrated numerically and experimentally in the current work to validate the spin-isolated dynamic UV-Vis holographic information at broadband wavelengths. In our opinion, the proposed metasurface can have promising applications in healthcare, optical security encryption, anti-counterfeiting, and UV-Vis nanophotonics.

Spin-Dependent First-Principles Study on Optoelectronic Properties of Neodymium Zirconates Pyrochlores Nd2Zr2O7 in Fd-3m and Pmma Phases.

Rare-earth zirconate pyrochlores (RE2Zr2O7) are of much fundamental and technological interest as optoelectronic, scintillator and thermal barrier coating materials. For the first time, we report the detailed optoelectronic properties of rare-earth zirconates Nd2Zr2O7 in both, i.e., for spin up and spin down states, via the use of first-principles density functional theory (DFT) procedure. To obtain the desired optoelectronic properties, we used a highly accurate method called full-potential linearized augmented plane wave (FPLAPW) within the generalized gradient approximation (GGA), parametrized with Hubbard potential U as an exchange-correlation function. The band gaps predicted for Nd2Zr2O7 were of the order 2.4 eV and 2.5 eV in Fd-3m and Pmma symmetrical phases, respectively. For both the phases, our research involved a complete examination of the optical properties of Nd2Zr2O7, including extinction coefficient, absorption coefficient, energy loss, function, reflectivity, refractive index, and real optical conductivity, analyzed in the spectral range from 0.0 eV to 14 eV. The calculated optical properties in both phases showed a considerable spin-dependent effect. The electronic bonding characteristics of different species in Nd2Zr2O7 within the two crystal symmetries were explored via the density distribution mapping of charge.

Single-layered meta-reflectarray for polarization retention and spin-encrypted phase-encoding.

Broadband communication with high data rates is a dire need for state-of-the-art wireless technologies. For achieving efficient wireless communication (particularly in an indoor environment), the electromagnetic (EM) waves should maintain their state of polarization despite encountering multiple reflections. Metasurfaces provide a unique platform to design subwavelength-featured meta-reflectarrays which enable the desired retention of the polarization state of an EM wave upon reflection. We present a single-layered broadband meta-reflectarray, simultaneously breaking n-fold (n > 2) rotational and mirror symmetry, which exhibits an unprecedented control over the phase, amplitude, and polarization of a reflected EM wave. This unique control enables the retention of polarization state and recording of spin-encrypted information for the reflected EM waves. Such novel multifunctional meta-reflectarray can be crucial to building an indoor setup for high data rate wireless communications. Meanwhile, the meta-array's ability to encode phase information provides an extra degree of freedom to structure and control (via incident spin) the reflected EM beam in the desired way. For the proof of concept, we have experimentally demonstrated a spin-encrypted holographic display which reconstructs the recorded holographic image at an image plane for the left circularly polarized (LCP) illumination and exhibits circular dichroism for the right circularly polarized (RCP) incident waves. The proposed meta-array can find applications in 5G indoor wireless communication, chiral sensing, spin-selective imaging, holography, and encryption.

Trace detection and photothermal spectral characterization by a tuneable thermal lens spectrometer with white-light excitation.

In the thermal lens experimental set-up we replaced the commonly employed pump laser by a halogen lamp, combined with an interference filter, providing a tuneable, nearly monochromatic pump source over the range of wavelengths 430-710 nm. Counter-propagating pump and probe beams are used and a 1 mm path-length sample cell together with the interference filter makes an optical cavity, providing amplification of the thermal lens signal, which leads to enhancement of the measurement sensitivity, and enables detection of absorbances on the order of 5 × 10-6. Amplified thermal lens signal allows us to replace the typical lock-in amplifier and digital oscilloscope with a silicon photodetector, Arduino, and a personal computer, offering the possibility for a compact, robust and portable device, useful for in-field absorption measurements in low concentration or weakly absorbing species. The use of a white light source for optical pumping, an interference filter for wavelength selection and direct diagnostic of the thermal lens signal increase the versatility of the instrument and simplifies substantially the experimental setup. Determination of Fe(II) concentrations at parts per billion levels was performed by the described white-light thermal lens spectrophotometer and the absorption spectrum for 50 µgL-1 Fe(II)-1,10-phenanthroline was well reproduced with an average measurement precision of 4%. The obtained limits of detection and quantitation of Fe(II) determination at 510 nm are 3 µgL-1 and 11 µgL-1, respectively. The calibration curve was linear in the concentration range of LOQ-500 µgL-1 with reproducibility between 2% and 6%, confirming that this instrument provides good spectrometric capabilities such as high sensitivity, tuneability and good reproducibility. In addition, the versatility of the instrument was demonstrated by recording the photothermal spectrum of gold nanostructured material and determination of excitation wavelength with most efficient optical to thermal energy conversion, which differs considerably (cca 100 nm) from the absorption maximum of the investigated sample.

Absorption Spectra of Ethanol and Water Using a Photothermal Lens Spectrophotometer.

In this work we report on the absorption spectra of ethanol and water in the region 430-700 nm using a homemade halogen lamp-based photothermal lens spectrophotometer with a multipass probe-beam configuration. The spectra also include well resolved, higher absorption overtones. The instrument achieves high sensitivity due to multiple reflections within the optical cavity containing the sample. Finally, an Arduino board was used for collecting and digitizing the signal, thus enabling a more compact device.

Narrow linewidth laterally coupled 1.55 µm AlGaInAs/InP distributed feedback lasers integrated with a curved tapered semiconductor optical amplifier.

We present a laterally coupled 1.55 µm AlGaInAs/InP distributed feedback laser monolithically integrated with a curved tapered optical amplifier, providing an output power of 210 mW with single transverse and longitudinal mode operation exhibiting a record low linewidth of 64 kHz.

High power (130 mW) 40 GHz 1.55 µm mode-locked distributed Bragg reflector lasers with integrated optical amplifiers.

High output power 40 GHz 1.55 µm passively mode-locked surface-etched distributed Bragg reflector (DBR) lasers with monolithically integrated semiconductor optical amplifiers are reported. These are based on an optimized AlGaInAs/InP epitaxial structure with a three quantum well active layer and an optical trap layer. The device produces near transform limited Gaussian pulses with a pulse duration of 3.3 ps. An average output power during mode-locked operation of 130 mW was achieved with a corresponding peak power of >1 W.

High frequency optoelectronic oscillators based on the optical feedback of semiconductor mode-locked laser diodes.

Optical self seeding feedback techniques can be used to improve the noise characteristics of passively mode-locked laser diodes. External cavities such as fiber optic cables can increase the memory of the phase and subsequently improve the timing jitter. In this work, an improved optical feedback architecture is proposed using an optical fiber loop delay as a cavity extension of the mode-locked laser. We investigate the effect of the noise reduction as a function of the loop length and feedback power. The well known composite cavity technique is also implemented for suppressing supermode noise artifacts presented due to harmonic mode locking effects. Using this method, we achieve a record low radio frequency linewidth of 192 Hz for any high frequency (>1 GHz) passively mode-locked laser to date (to the best of the authors' knowledge), making it promising for the development of high frequency optoelectronic oscillators.

CWDM source based on AlGaInAs/InP monolithically integrated DFB laser array.

The monolithic integration of four 1.5 µm range AlGaInAs/InP distributed feedback lasers with a 4×1 multimode-interference optical combiner, a curved semiconductor optical amplifier, and an electro-absorption modulator using relatively simple technologies--sidewall grating and quantum well intermixing--has been demonstrated. The four channels span the wavelength range of 1530 to 1566 nm with a channel spacing of 12 nm. The epitaxial structure was designed to produce a far-field pattern as small as 21.2°×25.1°, producing a coupling efficiency with an angled-end single-mode fiber at twice that of a conventional device design.

Low divergence angle and low jitter 40 GHz AlGaInAs/InP 1.55 µm mode-locked lasers.

We demonstrate a novel (to the best of our knowledge) 40 GHz passively mode-locked AlGaInAs/InP 1.55 µm laser with a low divergence angle (12.7°×26.3°), timing jitter of 1.2 ps (10 kHz-100 MHz), and a radio frequency linewidth of 25 kHz.