RESUMEN
Direct hydroxylation of benzene to phenol is more appealing in the industry for the economic and environmentally friendly phenol synthesis than the conventional cumene process. We have developed a UiO-metal-organic framework (MOF)-supported mono bipyridyl-Iron(II) hydroxyl catalyst [bpy-UiO-Fe(OH)2] for the selective benzene hydroxylation into phenol using H2O2 as the oxidant. The heterogeneous bpy-UiO-Fe(OH)2 catalyst showed high activity and remarkable phenol selectivity of 99%, giving the phenol mass-specific activity up to 1261 mmolPhOHgFe-1 h-1 at 60 °C. Bpy-UiO-Fe(OH)2 is significantly more active and selective than its homogeneous counterpart, bipyridine-Fe(OH)2. This enhanced catalytic activity of bpy-UiO-Fe(OH)2 over its homogeneous control is attributed to the active site isolation of the bpy-Fe(OH)2 moiety by the solid MOF that prevents intermolecular decomposition. Moreover, the exceptional selectivity of bpy-UiO-Fe(OH)2 in benzene to phenol conversion is originated via shape-selective catalysis, where the confined reaction space within the porous UiO-MOF prevents the formation of larger overoxidized products such as hydroquinone or benzoquinone, leading to the formation of only smaller-sized phenol after monohydroxylation of benzene. Spectroscopic and controlled experiments and theoretical calculations elucidated the reaction pathway, in which the in situ generated â¢OH radical mediated by bpy-UiO-FeII(OH)2 is the key species for benzene hydroxylation. This work underscores the significance of MOF-supported earth-abundant metal catalysts for sustainable production of fine chemicals.
RESUMEN
Reducing nitro compounds to amines is a fundamental reaction in producing valuable chemicals in industry. Herein, the synthesis and characterization of a zirconium metal-organic framework-supported salicylaldimine-cobalt(II) chloride (salim-UiO-CoCl) and its application in catalytic reduction of nitro compounds are reported. Salim-UiO-Co displayed excellent catalytic activity in chemoselective reduction of aromatic and aliphatic nitro compounds to the corresponding amines in the presence of phenylsilane as a reducing agent under mild reaction conditions. Salim-UiO-Co catalyzed nitro reduction had a broad substrate scope with excellent tolerance to diverse functional groups, including easily reducible ones such as aldehyde, keto, nitrile, and alkene. Salim-UiO-Co MOF catalyst could be recycled and reused at least 14 times without noticeable losing activity and selectivity. Density functional theory (DFT) studies along with spectroscopic analysis were employed to get into a comprehensive investigation of the reaction mechanism. This work underscores the significance of MOF-supported single-site base-metal catalysts for the sustainable and cost-effective synthesis of chemical feedstocks and fine chemicals.
RESUMEN
Upcycling nonbiodegradable plastics such as polyolefins is paramount due to their ever-increasing demand and landfills after usage. Catalytic hydrogenolysis is highly appealing to convert polyolefins into targeted value-added products under mild reaction conditions compared with other methods, such as high-temperature incineration and pyrolysis. We have developed three isoreticular zirconium UiO-metal-organic frameworks (UiO-MOFs) node-supported ruthenium dihydrides (UiO-RuH2), which are efficient heterogeneous catalysts for hydrogenolysis of polyethylene at 200 °C, affording liquid hydrocarbons with a narrow distribution and excellent selectivity via shape-selective catalysis. UiO-66-RuH2 catalyzed hydrogenolysis of single-use low-density polyethylene (LDPE) produced a C12 centered narrow bell-shaped distribution of C8-C16 alkanes in >80% yield and 90% selectivity in the liquid phase. By tuning the pore sizes of the isoreticular UiO-RuH2 MOF catalysts, the distribution of the products could be systematically altered, affording different fuel-grade liquid hydrocarbons from LDPE in high yields. Our spectroscopic and theoretical studies and control experiments reveal that UiO-RuH2 catalysts enable highly efficient upcycling of plastic wastes under mild conditions owing to their unique combination of coordinatively unsaturated single-site Ru-active sites, uniform and tunable pores, well-defined porous structure, and superior stability. The kinetics and theoretical calculations also identify the C-C bond scission involving ß-alkyl transfer as the turnover-limiting step.
RESUMEN
N-Formylation of amines with CO2 as a cheap and non-toxic C1-feedstock and hydrosilane reducing agent is a practical and environment friendly method to synthesize formamides. This study describes an efficient and chemoselective mono-N-formylation of amines using CO2 and phenylsilane under mild conditions using a porous metal-organic framework (MOF)-supported single-site cobalt catalyst (pyrim-UiO-Co). The pyrim-UiO-Co MOF has a UiO-topology, and its organic linkers bear a pyridylimine ligated Co catalytic moiety. A wide range of aliphatic and aromatic amines are transformed into desired N-formamides in moderate to excellent yields under 1-5 bar CO2. Pyrim-UiO-Co is tolerant to various functional groups and could be recycled and reused at least 10 times. Mechanistic investigation using kinetic, spectroscopic and density functional theory studies suggests that the formylation of benzylamine proceeds sequentially via oxidative addition of PhSiH3 and CO2 insertion, followed by a turn-over limiting reaction with an amine. Our work highlights the importance of MOF-based Earth-abundant metal catalysts for the practical and eco-friendly synthesis of fine chemicals using cheap feedstocks.
RESUMEN
Acetic acid is an industrially important chemical, produced mainly via carbonylation of methanol using precious metal-based homogeneous catalysts. As a low-cost feedstock, methane is commercially transformed to acetic acid via a multistep process involving energy-intensive methane steam reforming, methanol synthesis, and, subsequently, methanol carbonylation. Here, we report a direct single-step conversion of methane to acetic acid using molecular oxygen (O2) as the oxidant under mild conditions over a mono-copper hydroxyl site confined in a porous cerium metal-organic framework (MOF), Ce-UiO-Cu(OH). The Ce-UiO MOF-supported single-site copper hydroxyl catalyst gave exceptionally high acetic acid productivity of 335 mmolgcat-1 in 96% selectivity with a Cu TON up to 400 at 115 °C in water. Our spectroscopic and theoretical studies and controlled experiments reveal that the conversion of methane to acetic acid occurs via oxidative carbonylation, where methane is first activated at the copper hydroxyl site via σ-bond metathesis to afford Cu-methyl species, followed by carbonylation with in situ-generated carbon monoxide and subsequent hydrolysis by water. This work may guide the rational design of heterogeneous abundant metal catalysts for the activation and conversion of methane to acetic acid and other valuable chemicals under mild and environmentally friendly reaction conditions.
RESUMEN
BACKGROUND: The clavicle poses a diagnostic dilemma of the pathological lesions due to the wide range of pathologies seen at this site. This study aimed to identify and stratify various pathologies seen in the clavicle and to guide ways of investigation for diagnosis based on age, site and investigation findings. MATERIALS AND METHODS: Four hundred and ten cases with clavicle lesions were identified in our database. Data were collected about the patient's medical history, previous investigation, inflammatory markers radiological investigations and biopsy. All patients were worked up and managed after discussion in a multidisciplinary team meeting (MDT). RESULTS: Non-malignant lesions accounted for 79% of cases. Infection was the most common diagnosis (39%) and the commonest diagnosis in those less than 20 years of age. 73% of the lesions were found at the medial end of the clavicle. Malignant tumours were 21%, while primary benign bone tumours accounted for only 14%. 50% of the malignant lesions were due to metastatic disease. The risk of malignancy increases with advancing age. Erythrocyte sedimentation rate (ESR) and C-reactive protein (CRP) were not sensitive as a diagnostic tool in cases of osteomyelitis confirmed by histology. Magnetic resonance imaging (MRI) was noted to have high sensitivity and specificity for identifying the nature of a lesion and diagnosis. CONCLUSION: We have identified age as a positive predictor of a malignant cause in pathological lesions of the clavicle. MRI should be considered in all these cases. CRP and ESR have poor predictive values in diagnosing infection in the clavicle. Patients presenting with clavicle lesions should be discussed in a specialist MDT and undergo a systemic diagnostic workup, still in some cases, diagnosis can be speculated based on the patient's age, location of the lesion within the clavicle and the features seen on the MRI scan. LEVEL OF EVIDENCE: IV.
Asunto(s)
Neoplasias Óseas , Osteomielitis , Humanos , Clavícula/diagnóstico por imagen , Incidencia , Neoplasias Óseas/diagnóstico , Neoplasias Óseas/epidemiología , Neoplasias Óseas/patología , Osteomielitis/diagnóstico , Osteomielitis/epidemiología , Biopsia , Proteína C-ReactivaRESUMEN
An unprecedented, straightforward photochemical platform for efficient site-selective C-H alkylation of the C7 position of the benzocore via the cross coupling between coumarins and NHPI esters, employing Ru(II) as a photocatalyst in visible light, has been reported. Remarkably, this transformation demonstrated broad substrate scope and good functional group compatibility. Controlled experiments and DFT calculations shed some insight into the mechanistic details of the reaction and allowed us to propose a plausible mechanism for the regioselectivity.
Asunto(s)
Cumarinas , Luz , Alquilación , Catálisis , Estructura MolecularRESUMEN
The development of heterogeneous, chemoselective, and tandem catalytic systems using abundant metals is vital for the sustainable synthesis of fine and commodity chemicals. We report a robust and recyclable single-site cobalt-hydride catalyst based on a porous aluminum metal-organic framework (DUT-5 MOF) for chemoselective hydrogenation of arenes. The DUT-5 node-supported cobalt(II) hydride (DUT-5-CoH) is a versatile solid catalyst for chemoselective hydrogenation of a range of nonpolar and polar arenes, including heteroarenes such as pyridines, quinolines, isoquinolines, indoles, and furans to afford cycloalkanes and saturated heterocycles in excellent yields. DUT-5-CoH exhibited excellent functional group tolerance and could be reusable at least five times without decreased activity. The same MOF-Co catalyst was also efficient for tandem hydrogenation-hydrodeoxygenation of aryl carbonyl compounds, including biomass-derived platform molecules such as furfural and hydroxymethylfurfural to cycloalkanes. In the case of hydrogenation of cumene, our spectroscopic, kinetic, and density functional theory (DFT) studies suggest the insertion of a trisubstituted alkene intermediate into the Co-H bond occurring in the turnover limiting step. Our work highlights the potential of MOF-supported single-site base-metal catalysts for sustainable and environment-friendly industrial production of chemicals and biofuels.
RESUMEN
Chemoselective deoxygenation of carbonyls and alcohols using hydrogen by heterogeneous base-metal catalysts is crucial for the sustainable production of fine chemicals and biofuels. We report an aluminum metal-organic framework (DUT-5) node support cobalt(II) hydride, which is a highly chemoselective and recyclable heterogeneous catalyst for deoxygenation of a range of aromatic and aliphatic ketones, aldehydes, and primary and secondary alcohols, including biomass-derived substrates under 1 bar H2. The single-site cobalt catalyst (DUT-5-CoH) was easily prepared by postsynthetic metalation of the secondary building units (SBUs) of DUT-5 with CoCl2 followed by the reaction of NaEt3BH. X-ray photoelectron spectroscopy and X-ray absorption near-edge spectroscopy (XANES) indicated the presence of CoII and AlIII centers in DUT-5-CoH and DUT-5-Co after catalysis. The coordination environment of the cobalt center of DUT-5-Co before and after catalysis was established by extended X-ray fine structure spectroscopy (EXAFS) and density functional theory. The kinetic and computational data suggest reversible carbonyl coordination to cobalt preceding the turnover-limiting step, which involves 1,2-insertion of the coordinated carbonyl into the cobalt-hydride bond. The unique coordination environment of the cobalt ion ligated by oxo-nodes within the porous framework and the rate independency on the pressure of H2 allow the deoxygenation reactions chemoselectively under ambient hydrogen pressure.
RESUMEN
We report a strategy to develop heterogeneous single-site enantioselective catalysts based on naturally occurring amino acids and earth-abundant metals for eco-friendly asymmetric catalysis. The grafting of amino acids within the pores of a metal-organic framework (MOF), followed by post-synthetic metalation with iron precursor, affords highly active and enantioselective (>99 % ee for 10 examples) catalysts for hydrosilylation and hydroboration of carbonyl compounds. Impressively, the MOF-Fe catalyst displayed high turnover numbers of up to 10 000 and was recycled and reused more than 15 times without diminishing the enantioselectivity. MOF-Fe displayed much higher activity and enantioselectivity than its homogeneous control catalyst, likely due to the formation of robust single-site catalyst in the MOF through site-isolation.
RESUMEN
We report a highly active single-site heterogeneous cobalt-catalyst based on a porous and robust pyridylimine-functionalized metal-organic frameworks (pyrim-MOF) for chemoselective borylation of arene and benzylic C-H bonds. The pyrim-MOF having UiO-68 topology, constructed from zirconium-cluster secondary building units and pyridylimine-functionalized dicarboxylate bridging linkers, was metalated with CoCl2 followed by treatment of NaEt3BH to give the cobalt-functionalized MOF-catalyst (pyrim-MOF-Co). Pyrim-MOF-Co has a broad substrate scope, allowing the C-H borylation of halogen-, alkoxy-, alkyl-substituted arenes as well as heterocyclic ring systems using B2pin2 or HBpin (pin = pinacolate) as the borylating agent to afford the corresponding arene- or alkyl-boronate esters in good yields. Pyrim-MOF-Co gave a turnover number (TON) of up to 2500 and could be recycled and reused at least 9 times. Pyrim-MOF-Co was also significantly more robust and active than its homogeneous control, highlighting the beneficial effect of active-site isolation within the MOF framework that prevents intermolecular decomposition. The experimental and computational studies suggested (pyrimâ¢-)CoI(THF) as the active catalytic species within the MOF, which undergoes a mechanistic pathway of oxidative addition, turnover limiting σ-bond metathesis, followed by reductive elimination to afford the boronate ester.