Biocatalytic gateway to convert glycerol into 3-hydroxypropionic acid in waste-based biorefineries: Fundamentals, limitations, and potential research strategies.

Microbial conversion of bioenergy-derived waste glycerol into value-added chemicals has emerged as an important bioprocessing technology due to its eco-friendliness, feasible technoeconomics, and potential to provide sustainability in biodiesel and bioethanol production. Glycerol is an abundant liquid waste from bioenergy plants with a projected volume of 6 million tons by 2025, accounting for about 10% of biodiesel and 2.5% of bioethanol yields. 3-Hydroxypropionic acid (3-HP) is a major product of glycerol bioconversion, which is the third largest biobased platform compound with expected market size and value of 3.6 million tons/year and USD 10 billion/year, respectively. Despite these biorefinery values, 3-HP biosynthesis from glycerol is still at an immature stage of commercial exploitation. The main challenges behind this immaturity are the toxic effects of 3-HPA on cells, the distribution of carbon flux to undesirable pathways, low tolerance of cells to glycerol and 3-HP, co-factor dependence of enzymes, low enzyme activity and stability, and the problems of substrate inhibition and specificity of enzymes. To address these challenges, it is necessary to understand the fundamentals of glycerol bioconversion and 3-HP production in terms of metabolic pathways, related enzymes, cell factories, midstream process configurations, and downstream 3-HP recovery, as discussed in this review critically and comprehensively. It is equally important to know the current challenges and limitations in 3-HP production, which are discussed in detail along with recent research efforts and remaining gaps. Finally, possible research strategies are outlined considering the recent technological advances in microbial biosynthesis, aiming to attract further research efforts to achieve a sustainable and industrially exploitable 3-HP production technology. By discussing the use of advanced tools and strategies to overcome the existing challenges in 3-HP biosynthesis, this review will attract researchers from many other similar biosynthesis technologies and provide a common gateway for their further development.

Use of Spondias Mombin fruit pulp as a substrate for biosurfactant production.

In this study, we explored the possibility of utilizing the succulent pulp of Spondias mombin (SM) as feedstock for the synthesis of biosurfactants by Pseudomonas spp. The cultures were composed of basic mineral medium amended with SM, SM + glucose, glucose (GLC), and nutrient broth (NB) as carbon sources. Biosurfactant production was determined by surface-active properties such as hemolysis, emulsification index (E24), drop collapse, oil-spreading assays, and reduction of surface tension. The stability of the biosurfactants was monitored across different temperature and pH regimes while chemical components of the extracted biosurfactants were determined by thin-layer chromatography. Biosurfactants synthesized from SM as sole substrate showed the highest emulsification index (56.35%), oil-spreading capacity (4.4 ± 1.31 cm), hemolysis (3.10 ± 0.02 cm), the shortest time for drop collapse (30 s), and surface tension reduction (24 mN/m). Biosurfactant concentrations ranged from 0.07 ± 0.01 in the NB to 2.08 ± 0.01 g/L in the media amended with SM. Chemical characterization revealed significant concentrations of carbohydrates and lipids in the biosurfactant produced from SM (1.2 ± 0.17 and 0.88 ± 0.04 g/L, respectively) when compared to SM + glucose (0.92 ± 0.05, and 0.62 ± 0.02 g/L, respectively), glucose (0.35 ± 0.04 and 0.13 ± 0.02 g/L, respectively), and nutrient broth (0.06 ± 0.03 and 0.01 ± 0.01 g/L, respectively). The biosurfactants were stable over a wide range of temperature while E24 increased with pH. Our results show the viability of SM fruit pulp as low-cost feedstock for industrial-scale production of biosurfactants using Pseudomonas spp.