RESUMEN
Colorectal cancer (CRC) is the fourth most common cause of malignant tumor death. The development of novel, more effective drugs is desperately needed to treat CRC. Zingiber officinale is believed to possess anticancer properties due to its flavonoids and phenols. Using Soxhlet (SOXT) and maceration (MACR) techniques, the present study aimed to evaluate the amounts of quercetin, gallic acid, rutin, naringin, and caffeic acid in ginger capsules of Z. officinale. High-performance liquid chromatography (HPLC)/ultraviolet was used for separation and quantitation. In vitro toxicity evaluation of ginger capsules on the CRC cell line HT-29 was also conducted to assess the anticancer activity of the supplement. The cell line HT-29 (HTB-38) colorectal adenocarcinoma was utilized for the antiproliferative effect of 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide. Ginger herbal supplement extract at dosages of 200 and 100 µg had strong cytotoxic effects (IC50 < 50 µg/mL) on HT-29 CRC cells via MACR. This extract is comparable to the SOXT extract, which has an IC50 of less than 50 µg/mL. The anticancer effect of ginger herbal supplement formulations against CRC lines was investigated, and the results obtained from both the MACR and SOXT extraction procedures were noteworthy. The quercetin content was the highest of all the extracts according to the HPLC data.
RESUMEN
Nitric oxide (NO) induces protein posttranslational modification (PTM), known as S-nitrosylation, which has started to gain attention as a critical regulator of thousands of substrate proteins. However, our understanding of the biological consequences of this emerging PTM is incomplete because of the limited number of identified S-nitrosylated proteins (S-NO proteins). Recent advances in detection methods have effectively contributed to broadening the spectrum of discovered S-NO proteins. This article briefly reviews the progress in S-NO protein detection methods and discusses how these methods are involved in characterizing the biological consequences of this PTM. Additionally, we provide insight into S-NO protein-related diseases, focusing on the role of these proteins in mitigating the severity of infectious diseases.
RESUMEN
The effect of different contents of fullerene on the properties of polyurethane resins (PUs), including rheology and thermal properties, was investigated. Polyurethane resins were prepared through polyaddition reactions using different isocyanate monomers such as isophorone diisocyanate (IPDI), methylene diphenyl diisocyanate (MDI), hexamethylene diisocyanate (HDI), and different polyols, such as poly(oxytetramethylene) glycol (PTMG), the triol trade name FA-703, and polypropylene glycols (PPG), at an NCO/OH ratio 0.94 and a temperature of 100 °C. IR spectroscopy was used to control the polymerization of PUs through the shifting of NCO peaks. The results showed that the rheology and thermal properties of the prepared PU resins depend on the type of isocyanates and fullerene used. Based on the type of isocyanates, the PU resin prepared by MDI has the highest viscosity and thermal stability compared to the other isocyanates investigated. On the other hand, the PU resins prepared by IPDI mixed with fullerene had the highest viscosity and thermal stability. However, the initial decomposition temperature (T onset) of the PUs decreased with the addition of fullerene without affecting the maximum decomposition temperature (PDT max) of the PU resin.
RESUMEN
This study aims to improve the solubility and dissolution rate of alectinib (ALB), a tyrosine kinase inhibitor commonly used for treating non-small-cell carcinoma (NSCLC). Given ALB's low solubility and bioavailability, complexation with ß-cyclodextrin (ßCD) and hydroxy propyl ß-cyclodextrin (HPßCD) was evaluated. Some of the different preparation methods used with varying ALB-to-CD ratios led to the formation of complexes that were characterized using Fourier-Transform Infrared (FTIR) techniques and Differential Scanning Calorimetry (DSC) to prove complex formation. The encapsulation efficiency was also determined. The simulations were carried out for ALB's interactions with ßCD and HPßCD. This study identified the most soluble complex (ALB-HPßCD; 1:2 ratio) and evaluated its dissolution. The bioavailability of the ALB-HPßCD complex was evaluated in Wistar rats relative to free ALB. Pharmacokinetic profiles revealed increased Cmax (240 ± 26.95 ng/mL to 474 ± 50.07 ng/mL) and AUC0-48 (5946.75 ± 265 ng.h/mL to 10520 ± 310 ng.h/mL) with no change in the elimination rate constant. In conclusion, the complexation of ALB-HPßCD manages to increase in vitro solubility, the dissolution rate, and oral bioavailability, providing a favorable approach to improving ALB administration.
RESUMEN
Nanoliposomes (NLs) are ideal carriers for delivering complex molecules and phytochemical products, but ginger by-products, despite their therapeutic benefits, have poor bioavailability due to their low water solubility and stability. Crude ginger extracts (CGEs) and 6-gingerol were individually encapsulated within NLs for in vitro activity assessment. In vitro evaluation of anti-proliferative and anti-inflammatory properties of encapsulated 6-gingerol and CGE was performed on healthy human periodontal ligament (PDL) fibroblasts and MDA-MB-231 breast cancer cells. Encapsulation efficiency and loading capacity of 6-gingerol reached 25.23% and 2.5%, respectively. NLs were found stable for up to 30 days at 4°C with a gradual load loss of up to 20%. In vitro cytotoxic effect of encapsulated 6-gingerol exceeded 70% in the MDA-MB-231 cell line, in a comparable manner with non-encapsulated 6-gingerol and CGE. The effect of CGE with an IC50 of 3.11 ± 0.39, 7.14 ± 0.80, and 0.82 ± 0.55 µM and encapsulated 6-gingerol on inhibiting IL-8 was evident, indicating its potential anti-inflammatory activity. Encapsulating 6-gingerol within NLs enhanced its stability and facilitated its biological activity. All compounds, including vitamin C, were equivalent at concentrations below 2 mg/mL, with a slight difference in antioxidant activity. The concentrations capable of inhibiting 50% of 2,2-diphenyl-1-picrylhydrazyl (DPPH) substrate were comparable.
Asunto(s)
Antiinflamatorios , Catecoles , Alcoholes Grasos , Liposomas , Zingiber officinale , Alcoholes Grasos/química , Alcoholes Grasos/farmacología , Humanos , Catecoles/química , Catecoles/farmacología , Antiinflamatorios/química , Antiinflamatorios/farmacología , Antiinflamatorios/administración & dosificación , Antiinflamatorios/farmacocinética , Liposomas/química , Línea Celular Tumoral , Zingiber officinale/química , Antineoplásicos/química , Antineoplásicos/farmacología , Antineoplásicos/farmacocinética , Supervivencia Celular/efectos de los fármacos , Nanopartículas/química , Extractos Vegetales/química , Extractos Vegetales/farmacología , Interleucina-8/metabolismo , Proliferación Celular/efectos de los fármacosRESUMEN
This article discusses the main technologies for processing titanium-containing raw materials, the advantages, and disadvantages of various technological solutions. The analysis of the literature revealed that the traditional methods for the production of titanium products are mainly focused on the use of ilmenite concentrates. In connection with the depletion of ilmenite deposits, in the near future, there will inevitably be a need for a switch to the use of complex ores - titanomagnetite. Obtaining titanium dioxide (TiO2) from titanomagnetite raw materials with a high content of impurity components requires an individual approach for each specific deposit. The possibility of further improving the development of a technological process for low-temperature (1000-1200 °C) processing of titanomagnetite concentrates via the production of pure TiO2 is proposed.
RESUMEN
Background and Purpose: Apixaban (AP) is a factor X inhibitor, an orally active drug that inhibits blood coagulation for better prevention of venous thromboembolism. It has poor solubility, dissolution rate and low bioavailability. The aim of this study was to improve the aqueous solubility and dissolution rate of oral AP as a step to enhance its bioavailability by preparing it as an inclusion complex with beta- and hydroxy propyl beta-cyclodextrin. Experimental Approach: A simple, rapid method of analysis of AP was developed using ultraviolet spectrophotometry (UV) and partially validated in terms of linearity, precision and accuracy, recovery, and robustness. AP was prepared as a complex with beta cyclodextrin (ßCD) and hydroxy propyl beta cyclodextrin (HPßCD) in weight ratios 1:1, 1:2, and 1:3 by kneading, solvent evaporation and spray drying methods and characterized by Fourier transfer infra-red (FTIR), differential scanning calorimetry (DSC), and percent drug content in each of the prepared complex. Using the computer simulation, the interactions of AP with ßCD and HPßCD were investigated. Key Results: The phase solubility study showed that the solubility of AP was greatly enhanced from 54×10-3 mmol /L to 66 mmol/L using HPßCD with acceptable stability constant. Computer docking supports the formation of a stable 1:1 complex between AP and CD's. The dissolution test results showed that the complex gave a significantly higher percentage of drug release (95%) over one hour compared to the free AP (60%) (p<0.05). Conclusion: AP- HPßCD complex in the ratio of 1:2 (w/w) can significantly improve the solubility and in vitro dissolution rate of AP.
RESUMEN
Chronic wounds have become a major concern for healthcare systems, as they have been related to diabetic foot ulcers, venous leg ulcers and pressure ulcers. Oleuropein is an active compound that is extracted from olive leaves and it has the ability to reduce injury to tissues owing to its antioxidant effect, hence improving wound healing. The poor pharmacokinetics of oleuropein have limited its use clinically. This work is aimed toward studying the impact of PEGylated and non-PEGylated nanoliposomes loaded with oleuropein, as a carrier model, on wound-healing activity. The thin film hydration method was used to compose PEGylated and non-PEGylated liposomes, both loaded with oleuropein. The results indicated that each free, PEGylated and non-PEGylated composition was within the limit of optimum nanoliposome characterization. The results showed that non-PEGylated compositions produced higher efficiency in encapsulation (47.09 ± 10.06%) than the PEGylated ones (20.97 ± 10.52%). The PEG-nanoliposomes loaded with oleuropein (PEG-oleu) had mean size, charge and polydispersity index of 129.35 nm, -9.55 mV and 0.1010, respectively. The scratch assay results proved that PEGylated liposomal compositions have a more rapid wound-healing activity than non-PEGylated ones at different time intervals at 0, 2, 24 and 28 h.
Asunto(s)
Glucósidos Iridoides , Liposomas , Cicatrización de Heridas , PolietilenglicolesRESUMEN
Blend copolymers (PVA/S) were grafted with polyethylene glycol methyl methacrylate (PEGMA) with different ratios. Potassium persulfate was used as an initiator. The blend copolymer (PVA/S) was created by combining poly(vinyl alcohol) (PVA) with starch (S) in various ratios. The main idea was to study the effect of different ratios of the used raw materials on the biodegradability of plastic films. The resulting polymers (PVA/S/PEGMA) were analyzed using FTIR spectroscopy to investigate the hydrogen bond interaction between PVA, S, and PEGMA in the mixtures. TGA and SEM analyses were used to characterize the polymers (PVA/S/AA). The biodegradability and mechanical properties of the PVA/S/PEGMA blend films were evaluated. The findings revealed that the mechanical properties of the blend films are highly influenced by PEGMA. The time of degradation of the films immersed in soil and Coca-Cola increases as the contents of PVA and S and the molecular weight (MW) of PEGMA increase in the terpolymer. The M8 sample (PVA/S/PEGMA in the ratio of 3:1:2, respectively) with a MW of 950 g/mol produced the lowest elongation at break (67.5%), whereas M1 (PVA/S/PEGMA in the ratio of 1:1:1, respectively) with a MW of 300 g/mol produced the most (150%). The film's tensile strength and elongation at break were improved by grafting PEGMA onto the blending polymer (PAV-b-S). Tg and Tm increased when the PEGMA MW increased from 300 to 950. Tg (48.4 °C) and Tm (190.9 °C) were the lowest in M1 (300), while Tg (84.8 °C) and Tm (190.9 °C) were greatest in M1 (950) at 209.3 °C. The increased chain and molecular weight of PEGMA account for the increase in Tg and Tm of the copolymers.
RESUMEN
Cancer is considered one of the top global causes of death. Natural products have been used in oncology medicine either in crude form or by utilizing isolated secondary metabolites. Biologically active phytomolecules such as gallic acid and quercetin have confirmed antioxidant, anti-bacterial, and neoplastic properties. There is an agreement that microorganisms could mediate oncogenesis or alter the immune system. This research project aims to develop a novel formulation of co-loaded gallic acid and quercetin into nanoliposomes and investigate the efficacy of the free and combined agents against multiple cancerous cell lines and bacterial strains. Thin-film hydration technique was adopted to synthesize the nanocarriers. Particle characteristics were measured using a Zetasizer. The morphology of nanoliposomes was examined by scanning electron microscopy, Encapsulation efficiency and drug loading were evaluated using High-Performance Liquid Chromatography. Cytotoxicity was determined against Breast Cancer Cells MCF-7, Human Carcinoma Cells HT-29, and A549 Lung Cancer Cells. The antibacterial activities were evaluated against Acinetobacter baumannii, Escherichia coli, Proteus mirabilis, Pseudomonas aeruginosa, and Staphylococcus aureus. Therapeutic formulas were categorized into groups: free gallic acid, free quercetin, free-mix, and their nano-counterparts. Findings revealed that drug loading capacity was 0.204 for the mix formula compared to 0.092 and 0.68 for free gallic acid and quercetin, respectively. Regarding the Zeta potential, the mix formula showed more amphiphilic charge than the free quercetin and free gallic acid formulas (P-values 0.003 and 0.002 receptively). On the contrary, no significant difference in polydispersity indices was reported. Lung cancerous cells were the most affected by the treatments. The best estimated IC50 values were observed in breast and lung cancer lines for the nano-gallic acid and co-loaded particles. The nano-quercetin formula exhibited the least cytotoxicity with an IC50 value of ≥200 µg/mL in both breast (MCF-7) and colorectal adenocarcinoma cell lines (HT-29) with no activity against the lung. A remarkable improvement in the efficacy of quercetin was measured after mixing it with gallic acid against the breast and lungs. The tested therapeutic agents exhibited antimicrobial activity against gram-positive bacteria. Nano-liposomes can either enhance or reduce the cytotoxicity activity of active compounds depending on the physical and chemical properties of drug-loaded and type of cancer cells.
RESUMEN
BACKGROUND: Aeromonas are ubiquitous bacteria causing many clinical conditions including acute diarrhea. Diarrheagenic Aeromonas harbors aerolysin gene secreting virulent enterotoxin, aerolysin. OBJECTIVES: To develop a molecular and immunological based method for detection of Aeromonas. METHODS: Diarrheal Aeromonas strains were identified from stool samples using culture, enterotoxicity testing using mice model. During immune magnetic polymerase chain reaction IM-PCR protocol, aerolysin specific antibodies were bound with immuno magnetic binding. Sensitivity and specificity tests for IM-PCR were conducted. RESULTS: There was high detection of Aeromonas using IM-PCR (12.4 %) technique when compared to low isolation with culture (5.1%). Our study confirmed that some strains of enterotoxic Aeromonas strains were uncultivable. Enterotoxicity tests on culture isolates revealed many strains were negative. IM-PCR detected high, (62/500) rate of identification of Aeromonas with aerolysin toxin gene. Aeromonas species identified after IM-PCR were A. hydrophila (40.3% ), A. veronii (17.7 %), A. caviae (14.5 %), A. trota (11.2 %), A. jandei (9.6 %) and A. schuberti (6.4%). All A. trota strains were undetected by cultivation. CONCLUSION: High sensitivity and specificity of IM-PCR are due to preparation of aerolysin antibodies and immuno magnetic binding, prior to PCR. Since diseases due to Aeromonas are increasingly reported, IM-PCR is recommended for detection from clinical specimens.
Asunto(s)
Aeromonas/genética , Toxinas Bacterianas/genética , Diarrea/microbiología , Reacción en Cadena de la Polimerasa/métodos , Proteínas Citotóxicas Formadoras de Poros/genética , Aeromonas/aislamiento & purificación , Animales , Etiopía , Genes Bacterianos , Humanos , Fenómenos Magnéticos , Ratones , Conejos , Sensibilidad y EspecificidadRESUMEN
In the current work, the investigation and development of a chemo-enzymatic approach for the synthesis of neo-glycoproteins have been studied. This strategy is based on the regioselective enzymatic hydrolysis of peracetylated monosaccharide, functionalized at the anomeric position (C1) as 1-thio-(S-cyanomethyl) group, a precursor of the 2- iminomethoxyethyl thioglycosides-linker for protein glycosylation, catalyzed by immobilized enzymes to obtain selectively monodeprotected compounds. The use of this activation in C1 is the most frequently used strategy for glycoprotein preparation. The selected biocatalysts are the lipase from Candida rugosa and the acetyl xylan esterase from Bacillus pumilus. A reversed-phase high-performance liquid-chromatographic (HPLC) method for monitoring the regioselective deprotection reaction has been developed. The developed HPLC method was used as a fingerprint to follow the hydrolysis of substrate 1 to substrate 1a and to determine its purity and yield. Moreover, the obtained compound was further purified by flash chromatography. The obtained compound 1a was further characterized using (1) H, (13) C NMR, correlation spectroscopy (COSY) and heteronuclear multiple bond correlation. The resulting product can be used as an intermediate for the preparation of di- and more complex oligosaccharides aimed at protein conjugation. Copyright © 2016 John Wiley & Sons, Ltd.
Asunto(s)
Cromatografía Líquida de Alta Presión/métodos , Cromatografía de Fase Inversa/métodos , Monosacáridos/química , Tiocianatos/química , Biocatálisis , Espectroscopía de Resonancia Magnética con Carbono-13 , Espectroscopía de Protones por Resonancia MagnéticaRESUMEN
The current work reports an extended theoretical study from our previous experimental work for the enantioselective extraction of amlodipine enantiomers in a biphasic recognition chiral extraction system (BRCES) consisting of hydrophobic D-diisopropyl tartrate dissolved in organic phase (n-decanol) and hydrophilic hydroxypropyl-ß-cyclodextrin (HP-ß-CD) in aqueous phase (acetate buffer) which preferentially recognize the R-enantiomer and S-enantiomer, respectively. The calculations were simulated using a semi-empirical PM3 method as a part of the Gaussian09 software package and were used to optimize the structures of the hosts, guests, and host-guest complexes in the gas phase without any restrictions. It was found that HP-ß-CD has the strongest recognition ability among the three ß-CD derivatives studied, namely HP-ß-CD, hydroxyethyl-ß-cyclodextrin (HE-ß-CD), and methylated-ß-cyclodextrin (Me-ß-CD), due to the large interaction energies (Ecomp = -14.3025 kcal/ mol), while D-diisopropyl tartrate has the strongest ability among the four tartaric acid derivatives studied namely; L-diisopropyl tartrate, D-diisopropyl tartrate, L-diethyl tartrate, and D-diethyl tartrate (Ecomp = -5.9964 kcal/ mol). The computational calculations for the enantioselective partitioning of amlodipine enantiomers rationalized the reasons for the different behaviors for this extraction. The present theoretical results may be informative to scientists who are devoting themselves to developing models for their experimental parts or for enhancing the hydrophobic drug solubility in drug delivery systems.
RESUMEN
The aim of the current study was to develop a simple, precise, and accurate capillary zone electrophoresis method for the determination of zolpidem tartrate in tablet dosage form. Separation was conducted in normal polarity mode at 25°C, 22 kV, using hydrodynamic injection for 10 s. Separation was achieved using a background electrolyte of 20 mM disodium hydrogen phosphate adjusted with phosphoric acid (85%), pH at 5.50, and detection at 254 nm. Using the above optimized conditions, complete determination took place in less than 3 min using amiloride HCl as the internal standard. The method was linear over the range of 3-1000 µg mL(-1) with a correlation coefficient of 0.9999. Forced degradation studies were conducted by introducing a sample of zolpidem tartrate standard and pharmaceutical sample solutions to different forced degradation conditions, being neutral (water), basic (0.1 M NaOH), acidic (0.1 M HCl), oxidative (10% H2O2), temperature (60°C in oven for 3 days), and photolytic (exposure to UV light at 254 nm for 2 h). Degradation products resulting from the stress studies did not interfere with the detection of zolpidem tartrate and the assay can be considered stability-indicating.
RESUMEN
Capillary electrophoresis coupled with a capacitively coupled contactless conductivity detector (CE-C(4)D) has been employed for the determination of the ß-blocker drugs (atenolol and amiloride) in pharmaceutical formulations. 150 mM acetic acid was used as background electrolyte. The influence of several factors (detector excitation voltage and frequency, buffer concentration, applied voltage, capillary temperature, and injection time) was studied. Non-UV absorbing L-valine was used as an internal standard; the analytes were all separated in less than 7 min. The separation was carried out in normal polarity mode at 28 °C, 25 kV, and using hydrodynamic injection (25 s). The separation was effected in a bare fused-silica capillary 75 µm × 52 cm. The CE-C(4)D method was validated with respect to linearity, limit of detection and quantification, accuracy, precision, and selectivity. Calibration curves were linear over the range 5-250 µg mL(-1) for the studied analytes. The relative standard deviations of intra- and inter-day precisions of migration times and corrected peak areas were less than 6.0%. The method showed good precision and accuracy and was successfully applied to the simultaneous determination of the ß-blocker drugs in different pharmaceutical tablets.
Asunto(s)
Amilorida/análisis , Atenolol/análisis , Capacidad Eléctrica , Conductividad Eléctrica , Electroforesis Capilar/instrumentación , Electroforesis Capilar/métodos , Amilorida/química , Atenolol/química , Química Farmacéutica , Estándares de Referencia , ComprimidosRESUMEN
A simple micellar electrokinetic chromatography (MEKC) method for the simultaneous determination of 2-furfural (2-F), 3-furfural (3-F), 5-methylfurfural (5-MF), 5-hydroxymethylfurfural (5-HMF), 2-furoic acid (2-FA) and 3-furoic acid (3-FA) in honey and vegetable oils is described. Parameters affecting the separation such as pH, buffer and surfactant concentrations, applied voltage, capillary temperature, injection time and capillary length were studied and optimized. The separation was carried out in normal polarity mode at 20 °C, 22 kV and using hydrodynamic injection (17 s). The separation was achieved in a bare fused-silica capillary (46 cm × 50 µm i.d.) with a background electrolyte of 75 mM phosphoric acid (pH 7.3), containing 200 mM of sodium dodecyl sulphate (SDS). The detection wavelengths were at 200 nm (2-FA and 3-FA) and 280 nm (2-F, 3-F, 5-MF, 5-HMF). The furfurals were well separated in less than 20 min. The method was validated in terms of linearity, limit of detection and quantitation, precision and recoveries. Calibration curves of the six furfurals were well correlated (r(2)>0.991) within the range 1-25 µg mL(-1). Relative standard deviations of intra- and inter-day migration times and corrected peak areas ≤9.96% were achieved. The limit of detection (signal:noise, 3) was 0.33-0.70 µg mL(-1) whereas the limit of quantitation (signal:noise, 10) was 1.00-2.12 µg mL(-1). The method was applied to the determination of furanic compounds in honeys and vegetable oils (palm, walnut, grape seed and rapeseed). The effects of thermal treatment and gamma irradiation on the formation of the furanic compounds in honey were also investigated.
Asunto(s)
Cromatografía Capilar Electrocinética Micelar/métodos , Contaminación de Alimentos/análisis , Furanos/análisis , Miel/análisis , Aceites de Plantas/química , Cromatografía Capilar Electrocinética Micelar/instrumentación , Electrólitos/química , Furanos/aislamiento & purificación , Rayos gamma , Calor , Límite de Detección , Modelos Lineales , Factores de TiempoRESUMEN
A micellar electrokinetic chromatography method for the determination of sumatriptan succinate in pharmaceutical formulations was developed. The effects of several factors such as pH, surfactant and buffer concentration, applied voltage, capillary temperature, and injection time were investigated. Separation took about 5 min using phenobarbital as internal standard. The separation was carried out in reversed polarity mode at 20 °C, 26 kV and using hydrodynamic injection for 10s. Separation was achieved using a bare fused-silica capillary 50 µm×40 cm and background electrolyte of 25 mM sodium dihydrogen phosphate-adjusted with concentrated phosphoric acid to pH 2.2, containing 125 mM sodium dodecyl sulfate and detection was at 226 nm. The method was validated with respect to linearity, limits of detection and quantification, accuracy, precision and selectivity. The calibration curve was linear over the range of 100-2000 µg mL(-1). The relative standard deviations of intra-day and inter-day precision for migration time, peak area, corrected peak area, ratio of corrected peak area and ratio of peak area were less than 0.68, 3.48, 3.28, 2.97 and 2.83% and 2.01, 5.50, 4.46, 4.92 and 4.07%, respectively. The proposed method was successfully applied to the determinations of the analyte in tablet. Forced degradation studies were conducted by introducing a sample of sumatriptan succinate standard solution to different forced degradation conditions using neutral (water), basic (0.1 M NaOH), acidic (0.1 M HCl), oxidative (10% H(2)O(2)) and photolytic (exposure to UV light at 254 nm for 2 h). It is concluded that the stability-indicating method for sumatriptan succinate can be used for the analysis of the drug in various samples.
Asunto(s)
Cromatografía Capilar Electrocinética Micelar/métodos , Preparaciones Farmacéuticas/química , Agonistas del Receptor de Serotonina 5-HT1/análisis , Sumatriptán/análisis , Límite de Detección , Estándares de Referencia , Reproducibilidad de los Resultados , Tensoactivos/química , ComprimidosRESUMEN
Binding constants for the enantiomers of modafinil with the negatively charged chiral selector sulfated-ß-CD (S-ß-CD) using CE technique is presented. The calculations of the binding constants employing three different linearization plots (double reciprocal, X-reciprocal and Y-reciprocal) were performed from the electrophoretic mobility values of modafinil enantiomers at different concentrations of S-ß-CD in the BGE. The highest inclusion affinity of the modafinil enantiomers were observed for the S-enantiomer-S-ß-CD complex, in agreement with the computational calculations performed previously. Binding constants for each enantiomer-S-ß-CD complex at different temperatures, as well as thermodynamic parameters for binding, were calculated. Host-guest binding constants using the double reciprocal fit showed better linearity (r(2)>0.99) at all temperatures studied (15-30°C) and compared with the other two fit methods. The linear van't Hoff (15-30°C) plot obtained indicated that the thermodynamic parameters of complexation were temperature dependent for the enantiomers.
Asunto(s)
Compuestos de Bencidrilo/química , Electroforesis Capilar/métodos , beta-Ciclodextrinas/química , Cinética , Modelos Lineales , Modafinilo , Estereoisomerismo , Sulfatos/química , TermodinámicaRESUMEN
A capillary electrophoretic method for the separation of the enantiomers of both ofloxacin and ornidazole is described. Several parameters affecting the separation were studied, including the type and concentration of chiral selector, buffer pH, voltage and temperature. Good chiral separation of the racemic mixtures was achieved in less than 16 min with resolution factors Rs=5.45 and 6.28 for ofloxacin and ornidazole enantiomers, respectively. Separation was conducted using a bare fused-silica capillary and a background electrolyte (BGE) of 50 mM H(3)PO(4)-1 M tris solution; pH 1.85; containing 30 mg mL(-1) of sulfated-beta-cyclodextrin (S-beta-CD). The separation was carried out in reversed polarity mode at 25 degrees C, 18 kV, detection wavelength at 230 nm and using hydrodynamic injection for 15 s. Acceptable validation criteria for selectivity, linearity, precision, and accuracy were studied. The limits of detection (LOD) and limits of quantitation (LOQ) of the enantiomers (ofloxacin enantiomer 1 (OF-E1), ofloxacin enantiomer 2 (OF-E2), ornidazole enantiomer 1 (OR-E1) and ornidazole enantiomer 2 (OR-E2)) were (0.52, 0.46, 0.54, 0.89) and (1.59, 1.40, 3.07, 2.70) microg mL(-1), respectively. The proposed method was successfully applied to the assay of enantiomers of both ofloxacin and ornidazole in pharmaceutical formulations. The computational calculations for the enantiomeric inclusion complexes rationalized the reasons for the different migration times between the ofloxacin and ornidazole enantiomers.
Asunto(s)
Antibacterianos/aislamiento & purificación , Antiprotozoarios/aislamiento & purificación , Electroforesis Capilar/métodos , Ofloxacino/aislamiento & purificación , Ornidazol/aislamiento & purificación , Formas de Dosificación , Límite de Detección , Modelos Lineales , Modelos Moleculares , EstereoisomerismoRESUMEN
A three-phase hollow fiber liquid-phase microextraction (HF-LPME) coupled either with capillary electrophoresis (CE) or high performance liquid chromatography (HPLC) with UV detection methods was successfully developed for the determination of trace levels of the anti-diabetic drug, rosiglitazone (ROSI) in biological fluids. The analyte was extracted into dihexyl ether that was immobilized in the wall pores of a porous hollow fiber from 10 mL of aqueous sample, pH 9.5 (donor phase), and was back extracted into the acceptor phase that contained 0.1M HCl located in the lumen of the hollow fiber. Parameters affecting the extraction process such as type of extraction solvent, HCl concentration, donor phase pH, extraction time, stirring speed, and salt addition were studied and optimized. Under the optimized conditions (extraction solvent, dihexyl ether; donor phase pH, 9.5; acceptor phase, 0.1M HCl; stirring speed, 600 rpm; extraction time, 30 min; without addition of salt), enrichment factor of 280 was obtained. Good linearity and correlation coefficients of the analyte was obtained over the concentration ranges of 1.0-500 and 5.0-500 ng mL(-1) for the HPLC (r(2)=0.9988) and CE (r(2)=0.9967) methods, respectively. The limits of detection (LOD) and limits of quantitation (LOQ) for the HPLC and CE methods were (0.18, 2.83) and (0.56, 5.00) ng mL(-1), respectively. The percent relative standard deviation (n=6) for the extraction and determination of three concentration levels (10, 250, 500 ng mL(-1)) of ROSI using the HPLC and CE methods were less than 10.9% and 13.2%, respectively. The developed methods are simple, rapid, sensitive and are suitable for the determination of trace amounts of ROSI in biological fluids.