Antimicrobial Activity of Novel Ni(II) and Zn(II) Complexes with (E)-2-((5-Bromothiazol-2-yl)imino)methyl)phenol Ligand: Synthesis, Characterization and Molecular Docking Studies.

In order to address the challenges associated with antibiotic resistance by bacteria, two new complexes, Ni(II) and Zn(II), have been synthesized using the conventional method based on Schiff base ligand (E)-2-((5-bromothiazol-2-yl) imino) methyl) phenol. The Schiff base ligand (HL) was synthesized using salicylaldehyde and 5-(4-bromophenyl)thiazol-2-amine in both traditional and efficient, ecologically friendly, microwave-assisted procedures. The ligand and its complexes were evaluated by elemental analyses, FTIR spectroscopy, UV-Vis spectroscopy, nuclear magnetic resonance (NMR), thermogravimetric analysis (TGA) and magnetic susceptibility. The ligand and its complexes were tested for antibacterial activity against three Gram-positive bacteria (Staphylococcus aureus ATCC 25923, Methicillin-resistant Staphylococcus aureus ATCC 43300 and Enterococcus faecalis ATCC 29212) and three Gram-negative bacteria (Pseudomonas aeruginosa ATCC 27853, Escherichia coli ATCC 25922 and Klebsiella pneumoniae ATCC 700603). The findings demonstrate the potent activity of the ligand and its complexes against selective bacteria but the Ni(II) complex with MIC values ranging from 1.95 to 7.81 µg/mL outperformed all other compounds, including the widely used antibiotic Streptomycin. Furthermore, the docking study provided evidence supporting the validity of the antimicrobial results, since the Ni complex showed superior binding affinity against to E. coli NAD synthetase, which had a docking score (-7.61 kcal/mol).

Exploring DSSC Efficiency Enhancement: SQI-F and SQI-Cl Dyes with Iodolyte Electrolytes and CDCA Optimization.

This investigation delves into the potential use of halogen bonding to enhance both the short-circuit current (JSC) and overall efficiency of dye-sensitized solar cells (DSSCs). Specifically, we synthesized two distinct dyes, SQI-F and SQI-Cl, and characterized them using FT-IR, 1HNMR, 13C NMR, and mass spectroscopy. These dyes are based on the concept of incorporating halogen atoms within unsymmetrical squaraine structures with a donor-acceptor-donor (D-A-D) configuration. This strategic design aims to achieve optimal performance within DSSCs. We conducted comprehensive assessments using DSSC devices and integrated these synthesized dyes with iodolyte electrolytes, denoted as Z-50 and Z-100. Further enhancements were achieved through the addition of CDCA. Remarkably, in the absence of CDCA, both SQI-F and SQI-Cl dyes displayed distinct photovoltaic characteristics. However, through sensitization with three equivalents of CDCA, a significant improvement in performance became evident. The peak of performance was reached with the SQI-F dye, sensitized with three equivalents of CDCA, and paired with iodolyte Z-100. This combination yielded an impressive DSSC device efficiency of 6.74%, an open-circuit voltage (VOC) of 0.694 V, and a current density (JSC) of 13.67 mA/cm2. This substantial improvement in performance can primarily be attributed to the presence of a σ-hole, which facilitates a robust interaction between the electrolyte and the dyes anchored on the TiO2 substrate. This interaction optimizes the critical dye regeneration process within the DSSCs, ultimately leading to the observed enhancement in efficiency.

Novel Hybrid Triazoline - Triazole Glycosides: Synthesis, Characterization, Antimicrobial Activity study via In Vitro, and In Silico Means.

Series of novel 1,2,3-triazole, and 1,2,3- triazoline glycosides (a-e) were efficiently synthesized starting from d-arabinose in an effort to synthesize a new type of hybrid molecules containing sugar azide. The key step involved is the introduction of a new group, ethylene glycol, to the anomeric site and protection of the hydroxyl groups with acetic anhydride. Following that, the acetyl group is converted into ethylene glycol to tosylate. Compound Azido ethyl-O-ß-d-arabinofuranoside 4 was synthesized with good yield by treating the derivative 3 with sodium azide, which displaced the tosylate 3 and replaced it with the azide group. The new glycosides were synthesized via a 1,3-dipolar cycloaddition reaction between the intermediate compound 4 and several alkenes and alkynes. The triazole and triazoline compounds were characterized by FT-IR, 1H NMR, 13C NMR, LC/MS-IT-TOF spectral, and C·H.N. analysis. The antimicrobial screening was assayed using the disc diffusion technique revealed moderate to high potential inhibitory values against three test microorganisms compared to standard drugs. Their pharmacokinetics evaluation also showed promising drug-likeness and ADME properties. Furthermore, density functional theory (DFT) was utilized to obtain the molecular geometry of the title compounds utilizing B3LYP/6-311G++ (d, p), molecular electrostatic potential (MEP), frontier molecular orbitals (FMOs) through the investigation of HOMO and LUMO orbitals, and energy gap value. A lower energy gap value denotes that electrons can be transported more easily, indicating that molecule (b) is more reactive than other compounds. Molecular docking analysis revealed that all the designed triazole and triazoline glycosides interacted strongly inside the active site of the enzyme (PDB ID: 2Q85). and exhibits high docking scores, higher than the standard drug. The range of docking scores is -7.99 kcal/mol compound (a) to -7.42 kcal/mol compound (e).

An integrative GC-MS and LC-MS metabolomics platform determination of the metabolite profile of Bombax ceiba L. root, and in silico & in vitro evaluation of its antibacterial & antidiabetic activities.

The Bombax ceiba L. tree is a member of the family Bombacaceae and the genus Bombax. Both Chinese and Indian traditional medicine have made extensive use of it in the treatment of sickness. Its chemical composition is still a mystery. B. ceiba roots methanol extract (BCRME) was analyzed by different chromatographic analytical techniques in order to identify its major chemical constituents. Twelve compounds and six compounds were identified from GC-MS and LC-MS analysis, respectively. This is the first report on the presence of lathodoratin, cedrene, 4H-1-benzopyran-4-one,8-[{dimethylamino} methyl]-7-methoxy-3-methyl-2-phenyl, asiatic acid, and (E)-2,4,4'-trihydroxylchalcone in B. ceiba roots. Methanol extract demonstrated noteworthy antibacterial activity against Staphylococcus aureus (MTCC96) (MIC: 100 µg/mL) compare to antibiotic ampicillin (MIC: 250 µg/mL) as well as the highest α-amylase inhibition (IC50=26.91 µg/mL) and α-glucosidase inhibition (IC50=21.21 µg/mL) effects, molecular docking study confirmed these findings, with some compounds having a very high docking score.

Martynia annua safety and efficacy: heavy metal profile, in silico and in vitro approaches on antibacterial and antidiabetic activities.

Liquid Chromatography-Mass Spectrometry (LC-MS) analysis of methanol extract of Martynia annua seed revealed the presence of haploperozide and austricine. For safety, heavy metals content investigation of plant powder using the Inductively Coupled Plasma-Mass Spectrometry (ICP-MS) technique showed that the toxic metals (Pb: 2.07 mg/kg; Cd: 0.07 mg/kg; and As: 0.18 mg/kg) concentrations were found to be below the permissible limit. The extract demonstrated significant antibacterial activity against E. coli (MIC value 125 g/mL). Furthermore, it was effective in inhibiting both α-glucosidase and α-amylase enzymes with a high percentage and IC50 values were 42.28 ± 0.39 µg/mL and 34.11 ± 0.31 µg/mL, respectively. These findings were supported by a molecular docking study, some of the phytochemicals showed higher docking score values than references. However, Martynia annua seeds are safe to consume because they contain low levels of toxic heavy metals and possess antibacterial and anti-diabetic properties.

An Overview of Advances in the Chromatography of Drugs Impurity Profiling.

A systematic literature survey published in several journals of pharmaceutical chemistry and of chromatography used to analyze impurities for most of the drugs that have been reviewed. This article covers the period from 2016 to 2020, in which almost of chromatographic techniques have been used for drug impurity analysis. These chromatography techniques are important in the analysis and description of drug impurities. Moreover, some recent developments in forced impurity profiling have been discussed, such as buffer solutions, mobile phase, columns, elution modes, and detectors are highlighted in drugs used for the study. This primarily focuses on thorough updating of different analytical methods which include hyphenated techniques for detecting and quantifying impurity and degradation levels in various pharmaceutical matrices.

Design and synthesis of novel enantiopure Bis(5-Isoxazolidine) derivatives: insights into their antioxidant and antimicrobial potential via in silico drug-likeness, pharmacokinetic, medicinal chemistry properties, and molecular docking studies.

A series of novel compounds, mono-5-isoxazolidines, and bis (5-isoxazolidines) derivatives, were prepared as bicycloadducts. The new series of isoxazolidines were designed and synthesized via 1,3-dipolar cycloaddition reaction of nitrones with 3,9-Divinyl-2,4,8,10-tetra oxaspiro (5-5) undecane in the context of new antimicrobial and antioxidant drugs discovery and were fully characterized by FT-IR, 13C-NMR, and 1H-NMR spectroscopy. The physicochemical properties of all the novel cycloadducts, like bioactivity score and lipophilicity, were predicted using calculative methods. Similarly, the pharmacokinetic properties such as metabolism, absorption, distribution, and excretion (ADME) were also predicted. Most of the tested compounds exhibited antimicrobial properties to varying degrees against various bacterial species, including the Gram-negative bacteria Pseudomonas aeruginosa and Escherichia coli, and the Gram-positive bacteria Streptococcus pyogenus and Staphylococcus aureus, Antifungal properties were also observed against the tested fungi like Candida albicans, Aspergillus niger, and Aspergillus clavatus. The activity data exhibited that most compounds have high activity as compared to the standard drugs. In the range of graded doses, the results of some selected compounds revealed that some are high antioxidants while others are moderate or weak antioxidants. As evidenced by the molecular docking studies, the synthesized compounds showed good binding mode better than a standard drug, against the protein of a Pantothenate Synthetase enzyme (PDB-2X3F).