Design and synthesis of high quantum yield doped carbon nano probe derived from household sources for sensing of the anti-GERD drug pantoprazole.

This contribution aims to design and validate a new green, cheap, and fast approach for determining the anti-GERD drug pantoprazole in different matrices. New S and N-doped carbon nanomaterials (S,N-CNMs) have been prepared via microwave irradiation of a mixture of widely available household sources. Remarkably, the utilization of a blend of carbamide and thiocarbamide with table sugar yields S,N-CNMs exhibiting the utmost quantum yield (54 %), hydrophilicity, as well as stable, homogeneous, and diminutive particle size distribution. Fourier transform infrared spectroscopy, transmission electron microscopy, spectrophotometry, and fluorescence spectroscopy were applied to characterize the S,N-CNMs. The S,N-CNMs have been used as a turn-off fluorescence probe to determine pantoprazole via a synergism of the inner filter effect and static quenching mechanisms. The fluorescence quenching is linearly correlated to pantoprazole concentration over the range of 1.0-25.0 µg/mL with a detection limit of 0.16 µg/mL. The developed probe exhibited good selectivity for pantoprazole in the presence of variability of substances. Therefore, it was applied for quality control of pantoprazole in pharmaceutical tablets and vials with an average recovery % of 100.10 ± 0.77 % and 100.33 ± 0.92 %, respectively. Moreover, it was successfully implemented to examine the content uniformity of pantoprazole in tablets. Furthermore, the prepared S,N-CNMs have been successfully used for the analysis of pantoprazole in human plasma after a simple protein precipitation step with a recovery % of 97.88 ± 5.72 %. The greenness and blueness of the developed method have been positively assessed by recent tools showing the eco-friendliness and applicability of the developed method.

Sensitive determination of naftazone using carbon quantum dots nanoprobe by fluorimetry and smartphone-based techniques.

A simple, fast, and direct mix-and-read spectrofluorimetric method has been developed for the sensitive determination of naftazone (NFZ) utilizing graphene quantum dots (GQDs) as a greener and highly luminescent nanosensor. NFZ effectively quenches the strong fluorescence of GQDs at λex/λem of 350/440 nm via the inner filter effect mechanism. The nanosensor exhibits excellent linearity for NFZ over the concentration range of 0.46 to 186 µM with a limit of detection of 0.04 µM. The proposed method was validated for the successful determination of NFZ in tablets and on manufacturing equipment surfaces with good % recoveries of 98.4-101.6 and 96.3 - 102.2%, respectively. Furthermore, an integrated smartphone-based reader has been implemented and successfully applied for the determination of NFZ. The smartphone-based reader consists of a 365 nm UV torch as an excitation source, a smartphone for recording images, and smartphone-powered image analysis software for signal interpretation, together with a paper-based analytical device (PAD) utilizing filter paper as a substrate and correction fluid as a barrier for creation of detection zones. This smart platform showed excellent sensitivity with a limit of detection down to 0.12 nmol/zone, and it could be used for in-site determination of NFZ, especially for the limited resources laboratories.

Solid phase-fabrication of magnetically separable Fe3O4@graphene nanoplatelets nanocomposite for efficient removal of NSAIDs from wastewater. Perception of adsorption kinetics, thermodynamics, and extra-thermodynamics.

Non-steroidal anti-inflammatory drugs (NSAIDs) are among the most detected pharmaceuticals in wastewater and likely pass to drinking water. Magnetic nanocomposite has been greenly fabricated for removal of different NSAIDs; ibuprofen (IP), ketoprofen (KP), naproxen (NX), and diclofenac sodium salt (DF); from wastewater. Solid-phase fabrication of the magnetically separable nanocomposite has been optimized using iron oxide (Fe3O4) and graphene nanoplatelets (GNP) precursors. The characterization showed the homogenous distribution of the magnetite over the GNP with a high specific surface area. Different parameters having a potential influence on the removal of the NSAIDs from wastewater by the Fe3O4@GNP nanocomposite were studied and optimized for efficient performance that achieves adsorption capacities of 8.76, 10.6, 14.3, and 7.63 mg/g for KP, NX, DF, and IP, respectively (296 K). The adsorption of the four NSAIDs by the Fe3O4@GNP nanocomposite followed pseudo-second-order kinetics, and it is mainly controlled by the intraparticle diffusion process. The thermodynamic and extra-thermodynamic studies demonstrated that the adsorption is endothermic and is affected by enthalpy-entropy compensation. The molecular interactions of the four drugs with the nanocomposite have been explored. Successful application of the nanocomposite for fast and efficient removal of the NSAIDs from wastewater has been accomplished with an average removal of 71.0%.

Correction pen as a hydrophobic/lipophobic barrier plotter integrated with paper-based chips and a mini UV-torch to implement all-in-one device for determination of carbazochrome.

The design of a cheap, simple, and handy sensing system for rapid quantitation of pharmaceuticals becomes mandatory to ease drug development procedures, quality control, health care, etc. This work describes a simple, innovative, and easily manufactured paper-based device using a correction pen as a plotter for hydrophobic/lipophobic barriers and graphene quantum dots for recognition and quantification of the hemostatic drug carbazochrome, via fluorescence turn-off mechanism mediated by the inner filter effect. A smartphone-based all-in-one device fitted with an inexpensive 365 nm flashlight as a UV light source and a free image processing software was developed for rapid and reliable interpretation of the fluorescence change from the paper-based device upon introduction of the drug. The simple and convenient steps permit the analysis of many samples in a very short time. The smartphone-based all-in-one device featured excellent sensitivity for carbazochrome with a limit of detection equals to 12 ng/detection zone and good %recovery (100.0 ± 0.4). The reliability of the device was ascertained by favorable statistical comparison with the analogous optimized conventional fluorimetry method and a reference HPLC method. The device has been successfully applied for versatile quantitation of carbazochrome in tablets and on manufacturing equipment surfaces with excellent recoveries. The device offers many green aspects that definitely assist the implementation of the sustainability concept to analytical laboratories. The cost-efficiency, reliability, and ease of fabrication as well as the greenness and user friendship qualify the device for wide application in low-income communities.

High-temperature liquid chromatography for evaluation of the efficiency of multiwalled carbon nanotubes as nano extraction beds for removal of acidic drugs from wastewater. Greenness profiling and comprehensive kinetics and thermodynamics studies.

The retention behavior of a series of acidic drugs, namely ketoprofen (KET), naproxen (NAP), diclofenac (DIC), and ibuprofen (IBU), on the heat-resisting ZORBAX 300SB-C18 column, was studied thermodynamically using high-temperature liquid chromatography (HTLC). A perfect correlation of the compounds' lipophilicity and the calculated thermodynamic indicators evidenced its contribution to the retention behavior. Besides, the steric fitting has a subsidiary effect on IBU retention. Isocratic HTLC separation of the four compounds was achieved using an aqueous mobile phase containing 30% acetonitrile-0.2% acetic acid-0.2% triethylamine at 60 °C. This method has been utilized to monitor the adsorption efficiency of multiwalled carbon nanotubes (MWCNTs) for the removal of the four NSAIDs from water. Different variables affecting the remediation process have been optimized such as the time of contact, pH, ionic strength, temperature, and the mass of MWCNTs. The kinetics and thermodynamics of the adsorption were investigated. The adsorption was evidenced to take place via pseudo-second-order kinetics and the intraparticle diffusion is the rate-controlling step. The thermodynamic investigation showed that the adsorption process is exothermic and enthalpy-driven, and the adsorption is more extensive at a lower temperature. The MWCNTs showed excellent adsorption efficiency of about 76.4 to 97.6% at the optimum conditions. The obtained results are promising and encouraging for the full-scale application of MWCNTs for remediation of NSAIDs-related water pollution. The green analytical chemistry metric "AGREE" and the analytical eco-scale score tool confirmed that the developed protocol is greener and more favorable to the environment and user than most of the reported literature.

High-temperature liquid chromatography of steroids on a bonded hybrid column.

A hybrid stationary phase, XTerra MS C18, has been evaluated for the high-temperature reversed-phase liquid chromatography of selected hydrophobic steroids. The effects on the retention and efficiency at temperatures up to 130 degrees C and eluent compositions from methanol-water mixtures to superheated water were studied. The thermodynamic data of the separations were determined. It was shown that increasing the temperature enabled the percentage of methanol to be reduced. High mobile-phase flow rates could be used, but for these non-polar analytes, the retention times with superheated water as the eluent were still high.