Association of Genetic polymorphisms of EDN1 gene and Endothelin-1 level in patients with type 2 diabetes mellitus in the Jordanian population.

Endothelin-1 (ET-1) is one of the most potent vasoconstrictors, encoded by the endothelin-1 (EDN1) gene. It has been shown to play an important role in different diseases including Diabetes Mellitus (DM). Various single nucleotide polymorphisms (SNPs) in the EDN1 gene are related to microvascular complications of type 2 diabetes mellitus (T2DM) such as retinopathy, neuropathy and nephropathy. This study aims to determine the association between two selected EDN1 gene polymorphisms (rs2071942 G > A, rs5370 G > T) and T2DM in the Jordanian population, also to measure the level of ET-1 in T2DM. The samples were collected from the National Center of Diabetes, Endocrinology, and Genetics- Amman, Jordan, including 97 patients with T2DM and 80 healthy individuals. PCR-RFLP was used for SNPs genotyping. ET-1 level was determined using IQELISA kits. The univariate analysis for both SNPs didn't show statistically significant differences in the genotype or allele frequencies among T2DM cases as well as in controls. The same results were obtained regarding ET-1 concentration. The subgroup analysis by sex showed that the genotype and allelic frequencies of rs5370, rs2071942 G/A polymorphisms were not significantly different in males and females. Multivariate Analysis adjusted for various confounders didn't express statistical significance difference for occurrences of both SNPs. However, height and gender showed to be significant risk factors for occurrences of heterozygote alleles in both SNPs. On the other hand, the duration of diabetes has appeared to be related to the recessive allele in rs5370.

Simple and rapid quantification of ribociclib in rat plasma by protein precipitation and LC-MS/MS: An application to pharmacokinetics of ribociclib nanoparticles in rats.

Ribociclib is a cyclin-dependent kinase (CDK4/6) inhibitor and is a standard of care for treating metastatic breast cancer. The drug has moderate oral bioavailability and exhibits permeability-controlled absorption. Novel formulations to enhance ribociclib pharmacokinetics are being developed and tested in rats. This requires developing analytical assays for quantifying ribociclib monitoring in rat plasma. We present a fully validated, sensitive, and simple LC-MS/MS method for measuring ribociclib in rat plasma. Ribociclib-D6 was utilized as an internal standard, and a simple protein precipitation procedure with acetonitrile was used in sample preparation. Excellent assay linearity was observed over a standard curve concentration of 1.008-1027.624 ng/mL. Acceptable intra- and inter-day accuracy and reproductivity were demonstrated for ribociclib quality controls (bias and CV% within ±15%). Complete extraction recovery of ribociclib was achieved, and a negligible matrix effect of analyte to internal standard ratio was observed. Ribociclib was stable at various conditions, including bench-top, freeze-thaw, and short-term stability. Overall, the presented method is simple, sensitive, accurate, and precise and was successfully applied to quantify ribociclib in plasma samples from a pharmacokinetic study of ribociclib suspension and nanoparticle formulation in rats.

Ribociclib Hybrid Lipid-Polymer Nanoparticle Preparation and Characterization for Cancer Treatment.

Ribociclib is a newly approved orally administered drug for breast cancer. This study aimed to prepare, characterize, and evaluate hybrid lipid-polymer nanoparticles (PLNs) of ribociclib to enhance its in vitro dissolution rate, pharmacokinetics, and anticancer efficacy. Ribociclib-loaded PLNs were prepared by solvent evaporation using the Box-Behnken design to optimize formulation variables. Particle size, entrapment efficiency, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), atomic force microscopy (AFM), in vitro release cytotoxicity, molecular modeling, and pharmacokinetic studies were examined. The ribociclib-loaded PLN (formula 1, F1) was optimized in terms of particle size (266.9 ± 4.61 nm) and encapsulation efficiency (59.1 ± 2.57 mg/mL). DSC and thermogravimetric characterization showed the absence of a crystalline structure in the prepared PLNs, confirmed by FTIR, and showed no interactions between the components and the drug. AFM showed well-dispersed heterogeneously shaped nanoparticles. The in vitro release profile exhibited significant results for the optimized formula, reaching 100% at 600 and 90 min at pH 6.8 and 1.2, respectively. The low IC50 obtained by the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide (MTT) assay suggests that optimized PLN might serve as an effective delivery vehicle for cancer treatment, especially breast and lung cancer. Molecular modeling revealed several hydrogen bonds. A pharmacokinetic study in rats showed that the ribociclib formula had a 6.5-fold increase in maximum concentration (Cmax) and a 5.6-fold increase in area under the curve (AUC). Regarding the everted intestinal sac absorption, formula 1 increased ribociclib penetration relative to the physical combination and pure medication. In conclusion, optimized PLNs with enhanced physicochemical and cytotoxic properties and improved pharmacokinetic parameters were successfully prepared.

Abemaciclib-loaded ethylcellulose based nanosponges for sustained cytotoxicity against MCF-7 and MDA-MB-231 human breast cancer cells lines.

Abemaciclib (AC) is a novel, orally available drug molecule approved for the treatment of breast cancer. Due to its low bioavailability, its administration frequency is two to three times a day that can decrease patient compliance. Sustained release formulation are needed for prolong the action and to reduce the adverse effects. The aim of current study was to develop sustained release NSs of AC. Nanosponges (NSs) was prepared by emulsion-solvent diffusion method using ethyl-cellulose (EC) and Kolliphor P-188 (KP-188) as sustained-release polymer and surfactant, respectively. Effects of varying surfactant concentration and drug: polymer proportions on the particle size (PS), polydispersity index (PDI), zeta potential (ζP), entrapment efficiency (%EE), and drug loading (%DL) were investigated. The results of AC loaded NSs (ACN1-ACN5) exhibited PS (366.3-842.2 nm), PDI (0.448-0.853), ζP (-8.21 to -19.7 mV), %EE (48.45-79.36%) and %DL (7.69-19.17%), respectively. Moreover, ACN2 showed sustained release of Abemaciclib (77.12 ± 2.54%) in 24 h Higuchi matrix as best fit kinetics model. MTT assay signified ACN2 as potentials cytotoxic nanocarrier against MCF-7 and MDA-MB-231 human breast cancer cells. Further, ACN2 displayed drug release property without variation in the % release after exposing the product at 25 °C, 5 °C, and 45 °C storage conditions for six months. This investigation proved that the developed NSs would be an efficient carrier to sustain the release of AC in order to improve efficacy against breast cancer.

Solubilization of a novel antitumor drug ribociclib in water and ten different organic solvents at different temperatures.

OBJECTIVE: This study reports new solubility and physicochemical data for ribociclib (RCB) in water and ten organic solvents including "methanol (MeOH), ethanol (EtOH), isopropyl alcohol (IPA), n-butanol (n-BuOH), propylene glycol (PG), polyethylene glycol-400 (PEG-400), acetone, ethyl acetate (EA), Transcutol-HP (THP), and dimethyl sulfoxide (DMSO)" at 293.2-313.2 K and 101.1 kPa. SIGNIFICANCE: The obtained data are useful for the industrial applications of RCB. METHODS: The solubility of RCB was measured and regressed using "van't Hoff, Buchowski-Ksiazczak λh, the modified Apelblat, and Jouyban models." RESULTS: The overall deviations of <4.0% were recorded for all four models. The maximum mole fraction solubility of RCB was 2.66 × 10-2 in PEG-400 at 313.2 K, however, the lowest one was in the water. The RCB solubility increased with temperature and the order followed in the water and ten different organic solvents was PEG-400 (2.66 × 10-2) > THP (1.00 × 10-2) > PG (5.39 × 10-3) > DMSO (5.00 × 10-3) > n-BuOH (3.23 × 10-3) > acetone (3.11 × 10-3) > IPA (1.58 × 10-3) > EA (1.41 × 10-3) > EtOH (1.37 × 10-3) > MeOH (8.10 × 10-4) > water (2.38 × 10-5) at 313.2 K. The maximum solute-solvent interactions were found in RCB-PEG-400 in comparison with other combination of RCB and solvents. "Apparent thermodynamic analysis" indicated an "endothermic and entropy-driven dissolution" of RCB in water and ten organic solvents. CONCLUSIONS: Based on all these data and observations, PEG-400 can be used as the best co-solvent for RCB solubilization.

Theoretical evaluation of poly(amidoamine) dendrimers with different peripheral groups as a purinethol drug delivery system in aqueous medium.

In this work, density functional theory calculations were used to study the association of PUR with amine- and acetyl-terminated PAMAM dendrimers considering implicit solvent effect at neutral and low pH conditions. Frontier molecular orbitals' analysis indicates that the electronic properties of dendrimers are extremely sensitive to the presence of PUR molecule at both neutral and low pH conditions. Encapsulation of PUR molecule into the both amine- and acetyl-terminated PAMAM dendrimers leads to a Gibbs free energy of (ΔG) - 20.25 kcal.mol-1 at physiological pH. The corresponding ΔG values reduce to the - 1.45 and - 0.91 kcal.mol-1 at low pH, indicating that the drug molecule is released easily at low pH. The calculated recovery times for amine- (3.87 ×102 and 3.87 ×102, at neutral and low pH, respectively) and acetyl-terminated (5.34 ×1010 and 1.81 ×10-1, at neutral and low pH, respectively) dendrimers suggest that acetylation can improve the release pattern of drug molecule.

Pharmacokinetics and Bioequivalence of Two Empagliflozin, with Evaluation in Healthy Jordanian Subjects under Fasting and Fed Conditions.

The current study is a randomized, open-label, two-period, two-sequence, two-way crossover pharmacokinetic study in healthy Jordanian subjects to evaluate the pharmacokinetics and bioequivalence profile of two cases of empagliflozin 10 mg under fasting and fed conditions. The plasma concentrations of empagliflozin were determined using an HPLC-MS/MS method. Tolerability and safety were assessed throughout the study. This study included 26 subjects, 26 in both fasting and fed groups.The pharmacokinetic parameters, which included the area under the concentration-time curve from time zero to infinity (AUC0-inf) and the final quantifiable concentration (AUC0-last), maximum serum concentration (Cmax), and time to reach the maximum drug concentration (Tmax) were found to be within an equivalence margin of 80.00-125.00%. The pharmacokinetic profiles show that the empagliflozin test and parent reference cases were bioequivalent in healthy subjects. The two treatments' safety evaluations were also comparable.

Exploitation of Design-of-Experiment Approach for Design and Optimization of Fast-Disintegrating Tablets for Sublingual Delivery of Sildenafil Citrate with Enhanced Bioavailability Using Fluid-Bed Granulation Technique.

Sildenafil citrate undergoes first-pass metabolism, resulting in poor oral bioavailability at 25-41% of the administered dose. This study aimed to design and optimize fast-disintegrating tablets for the sublingual delivery of sildenafil citrate to improve bioavailability and facilitate rapid onset of action. The design-of-experiment (DoE) approach using 32 full factorial design was conducted to develop a new formulation of sildenafil fast-disintegrating sublingual tablets (FDSTs) using the fluid-bed granulation technique. The levels of partially pre-gelatinized starch (5-15%) and microcrystalline cellulose (10-60%) were selected as independent formulation variables. The prepared FDSTs were investigated for physical properties. Further, the optimum formulation was chosen for in vivo study in rabbits. Regression analysis showed that independent variables have a significant (p < 0.05) influence on critical attributes of FDSTs. The optimized formulation showed acceptable mechanical strength (friability < 1.0%) with very fast disintegration (14.561 ± 0.84 s) and dissolution (94.734 ± 2.76% after 15 min). Further, the optimized formulation demonstrated a significant increase (p < 0.01) in Cmax and AUC0-∞ with short tmax compared to the market product (Viagra®). Based on these results, using the DoE approach, a high level of assurance was achieved for FDSTs' product quality and performance.

Eco-friendly stability-indicating RP-HPTLC method for sildenafil analysis, characterization and biological evaluation of its oxidized stress degradation product.

A feasible and cost effective reverse-phase high-performance thin layer chromatography (RP-HPTLC) based method was developed for the quantification of sildenafil (SLD) using eco-friendly EtOH:H2O (9.5:0.5 v/v) as mobile phase. SLD was subjected to stress conditions according to the International Conference on Harmonization (ICH) guidelines. The drug undergoes significant structural changes under oxidative stress condition to the N-oxide derivative. The oxidation product Sildenafil N-oxide (SDL N-oxide) designated in the European Pharmacopeia (EP) as impurity B was characterized utilizing 1D- and 2D-NMR as well as High Resolution Electrospray Ionization Mass Spectroscopy. The aphrodisiac potency of SDL N-oxide in comparison with SLD was evaluated in vivo using rats as experimental animal model. The evaluation based on the following parameters: mount, intromission and ejaculation latencies (ML, IL and EL, respectively), mounting and intromission frequencies (MF and IF, respectively), and postejaculatory interval (PEI). SLD N-oxide expressed similar aphrodisiac effect to SLD but with less potency. Molecular docking of SDL N-oxide along with the parent drug SLD, indicated a strong binding affinity and similar binding pattern within the active site of phosphodiesterase 5 (PDE5). However, the docking score of SLD N-oxide was slightly lower as compared to SLD in agreement with the biological study findings.

Solubility determination and solution thermodynamics of olmesartan medoxomil in (PEG-400 + water) cosolvent mixtures.

The solubility and solution thermodynamic properties of a weakly water-soluble compound olmesartan medoxomil (OLM) in binary 'polyethylene glycol (PEG-400) + water' cosolvent compositions were determined. The 'mole fraction solubility (x e)' of OLM in binary 'PEG-400 + water' cosolvent compositions and pure solvents (PEG-400 and water) was determined at 'T = 295.15-330.15 K' and 'p = 0.1 MPa'. The Hansen solubility parameter (HSP) of OLM, pure PEG-400, pure water, and binary 'PEG-400 + water' cosolvent compositions free of OLM were also predicted. The obtained x e values of OLM were correlated using 'van't Hoff, modified Apelblat, Yalkowsky-Roseman, Jouyban-Acree and Jouyban-Acree-van't Hoff' computational models with the error values of <4.0%. The maximum and minimum x e value of OLM was predicted in neat PEG-400 (1.15 × 10-2 at T = 330.15 K) and neat water (1.90 × 10-7 at T = 295.15 K), respectively. The OLM HSP was predicted to be more close with that of neat PEG-400. The x e value of OLM was found increased significantly with increase in temperature and PEG-400 mass fraction in all 'PEG-400 + water' cosolvent compositions including neat PEG-400 and neat water. An 'apparent thermodynamic analysis' studies presented an 'endothermic and entropy-driven dissolution' of OLM in all 'PEG-400 + water' cosolvent compositions including pure PEG-400 and pure water.

Eluxadoline Loaded Solid Lipid Nanoparticles for Improved Colon Targeting in Rat Model of Ulcerative Colitis.

The aim of the current study was to evaluate the therapeutics potential of eluxadoline (ELX) loaded solid lipid nanoparticles (SLNs) in ulcerative colitis. ELX loaded SLNs were prepared using three different lipids according to the solvent emulsification technique. The optimization of prepared SLNs (F1-F3) were carried out based on size, PDI, zeta potential, percent drug entrapment (%EE), and loading (%DL). The lipid (stearic acid) based SLNs (F2) was optimized with particle size (266.0 ± 6.4 nm), PDI (0.217 ± 0.04), zeta potential (31.2 ± 5.19 mV), EE (65.0 ± 4.8%), and DL (4.60 ± 0.8%). The optimized SLNs (F2) was further evaluated by DSC, FTIR, SEM, in vitro release, and stability studies, which confirmed the successful encapsulation of ELX in SLNs. The efficacy of optimized SLNs (F2) in comparison to the pure ELX drug was assessed in acetic acid induced colitis rat models. It was observed that the delivery of ELX by SLNs alleviated the induced acetic acid colitis significantly. Thus, ELX loaded SLNs delivery to the colon has a significant potential to be developed for the treatment of ulcerative colitis.

High throughput µ-SPE based elution coupled with UPLC-MS/MS for determination of eluxadoline in plasma sample: Application in pharmacokinetic characterization of PLGA nanoparticle formulations in rats.

Eluxadoline is a novel µ- and κ-opioid receptor (OR) agonist and δ-OR antagonist, recently approved as a first line therapy for the treatment of irritable bowel syndrome. Due to abuse potential, poor bioavailability and high intersubject variability, a sensitive and reliable assay is prerequisite for its determination in biological samples. This work first time report the development and validation of UPLC-MS/MS assay for determination of eluxadoline in rat plasma sample using risperidone as an internal standard (IS). A high-throughput 96-well plate format µ-SPE technique was used for plasma sample extraction. The extracted samples were separated on Acquity BEH™ C18 column (100×2.1mm, 1.7µm) using mobile phase elution of acetonitrile: 20mM ammonium acetate (80:20, v/v) at a flow rate of 0.3mLmin-1. The precursor to product ion transition of m/z 570.16→118.12 (qualifier), 570.16→171.08 (quantifier) for eluxadoline, and m/z 411.18→191.07 for IS were used for MRM monitoring. The calibration curves were linear in concentration range of 0.15-50ngmL-1 with LOD and LOQ of 0.07 and 0.15ngmL-1, respectively. The validation results satisfied the criteria of USFDA and SWGTOX guidelines and were within the acceptable limit. Finally, the method was successfully applied in bioavailability enhancement study of the newly developed PLGA nanoparticles and Eudragit coated PLGA nanoparticles of eluxadoline in rats.

Anticancer Efficacy of Self-Nanoemulsifying Drug Delivery System of Sunitinib Malate.

Sunitinib malate (SM) is reported as a weakly soluble drug in water due to its poor dissolution rate and oral bioavailability. Hence, in the current study, various "self-nanoemulsifying drug delivery systems (SNEDDS)" of SM were prepared, characterized and evaluated for the enhancement of its in vitro dissolution rate and anticancer efficacy. On the basis of solubilization potential of SM in various excipients, "Lauroglycol-90 (oil), Triton-X100 (surfactant) and Transcutol-P (cosurfactant)" were selected for the preparation of SM SNEDDS. SM-loaded SNEDDS were developed by spontaneous emulsification method, characterized and evaluated for "thermodynamic stability, self-nanoemulsification efficiency, droplet size, polydispersity index (PDI), zeta potential (ZP), surface morphology, refractive index (RI), the percent of transmittance (% T) and drug release profile." In vitro dissolution rate of SM was significantly enhanced from an optimized SNEDDS in comparison with SM suspension. The optimized SNEDDS of SM with droplet size of 42.3 nm, PDI value of 0.174, ZP value of -36.4 mV, RI value of 1.339, % T value of 97.3%, and drug release profile of 95.4% (after 24 h via dialysis membrane) was selected for in vitro anticancer efficacy in human colon cancer cells (HT-29) by MTT assay. MTT assay indicated significant anticancer efficacy of optimized SM SNEDDS against HT-29 cells in comparison with free SM. The results of this study showed the great potential of SNEDDS in the enhancement of in vitro dissolution rate and anticancer efficacy of poorly soluble drug such as SM.

Preparation, Evaluation and Bioavailability Studies of Eudragit Coated PLGA Nanoparticles for Sustained Release of Eluxadoline for the Treatment of Irritable Bowel Syndrome.

Eluxadoline is a newly approved orally administered drug used for the treatment of Irritable Bowel Syndrome with Diarrhea. It is reported as a poorly water-soluble drug due to which its dissolution rate and oral bioavailability are very poor. In this work, various plain PLGA nanoparticles (NPs) (F1-F4) were prepared and optimized based on particle size, PDI, zeta potential and percent drug entrapment efficiency (EE). The developed plain NPs (F1-F4) showed average particle size ranging from 260.19 to 279.76 nm with smooth surface and EE of 17.83-56.29%. The optimized plain NPs (F3) had particle size of 273.76 ± 7.25 nm with a low PDI value 0.327, zeta potential - 30.63 ± 2.47 mV and % EE of 56.29 ± 2.56%. The optimized F3 NPs was further submitted for enteric coating using Eudragit S100 polymer and evaluated in terms of particles characterization, in vitro release and pharmacokinetic studies in rats. The bioavailability of plain and coated nanaoparticles were enhanced by 6.8- and 18.5-fold, respectively, compared to normal suspension. These results revealed that the developed coated NPs could be used for its oral delivery for an effective treatment of Irritable Bowel Syndrome with Diarrhea.

New gentle-wing high-shear granulator: impact of processing variables on granules and tablets characteristics of high-drug loading formulation using design of experiment approach.

The aim of this work was to study the application of design of experiment (DoE) approach in defining design space for granulation and tableting processes using a novel gentle-wing high-shear granulator. According to quality-by-design (QbD) prospective, critical attributes of granules, and tablets should be ensured by manufacturing process design. A face-centered central composite design has been employed in order to investigate the effect of water amount (X1), impeller speed (X2), wet massing time (X3), and water addition rate (X4) as independent process variables on granules and tablets characteristics. Acetaminophen was used as a model drug and granulation experiments were carried out using dry addition of povidone k30. The dried granules have been analyzed for their size distribution, density, and flow pattern. Additionally, the produced tablets have been investigated for; weight uniformity, breaking force, friability and percent capping, disintegration time, and drug dissolution. Results of regression analysis showed that water amount, impeller speed and wet massing time have significant (p < .05) effect on granules and tablets characteristics. However, the water amount had the most pronounced effect as indicated by its higher parameter estimate. On the other hand, water addition rate showed a minimal impact on granules and tablets properties. In conclusion, water amount, impeller speed, and wet massing time could be considered as critical process variables. Thus, understanding the relationship between these variables and quality attributes of granules and corresponding tablets provides the basis for adjusting granulation variables in order to optimize product performance.

Development and evaluation of PLGA polymer based nanoparticles of quercetin.

Quercetin is the most abundant antioxidant found in the human diet. Low aqueous solubility of quercetin limits its bioavailability and hence therapeutic effects. Therefore, the aim of the present study was to develop a poly lactide-co-glycolic acid (PLGA) polymer based nanoparticles of quercetin with a view to improve its aqueous solubility and examine the effect on its antioxidant and diuretic properties. Nanoparticles of quercetin were developed by single emulsion-solvent evaporation technique and evaluated in vitro for differential scanning calorimetry (DSC), Fourier transforms infra-red (FTIR) spectroscopy, particle size, polydispersity index and drug entrapment efficiency. Among the five different formulations (F1, F2, F3, F4 and F5), F2 and F3 were optimized with an average particle size of 189nm and 186nm and high entrapment values of 86.48%, 83.71%, respectively. SEM images of confirmed that prepared nanoparticles were spherical in shape with a smooth surface. In vitro release and anti-oxidant activity confirmed significant results. Furthermore, its in vivo diuretic activity was much better as compared to pure quercetin. The overall results suggest that PLGA polymer based nanoparticle could be a potential option for quercetin delivery.

Enhanced oral bioavailability of insulin-loaded solid lipid nanoparticles: pharmacokinetic bioavailability of insulin-loaded solid lipid nanoparticles in diabetic rats.

OBJECTIVE: Insulin is a hormone used in the treatment of diabetes mellitus. Multiple injections of insulin every day may causes pain, allergic reactions at injection site, which lead to low patient compliance. The aim of this work was to develop and evaluate an efficient solid lipid nanoparticle (SLN) carrier for oral delivery of insulin. METHODS: SLNs were prepared by double emulsion solvent evaporation (w/o/w) technique, employing glyceryltrimyristate (Dynasan 114) as lipid phase and soy lecithin and polyvinyl alcohol as primary and secondary emulsifier, respectively, and evaluated in vitro for particle size, polydispersity index (PDI) and drug entrapment. RESULTS: Among the eight different developed formulae (F1-F8), F7 showed an average particle size (99 nm), PDI (0.021), high entrapment of drug (56.5%). The optimized formulation (F7) was further evaluated by FT-IR, DSC, XRD, in vitro release, permeation, stability, bioavailability and pharmacological studies. Insulin-loaded SLNs showed better protection from gastrointestinal environment as evident from the relative bioavailability, which was enhanced five times as compared to the insulin solution. A significant enhancement of relative bioavailability of insulin was observed, i.e. approximately five times of pure insulin solution when loaded in SLN (8.26% versus 1.7% only).