Halogen-Decorated Metal-Organic Frameworks for Efficient and Selective CO2 Capture, Separation, and Chemical Fixation with Epoxides under Mild Conditions.

In the present work, three novel halogen-appended cadmium(II) metal-organic frameworks [Cd2(L1)2(4,4'-Bipy)2]n·4n(DMF) (1), [Cd2(L2)2(4,4'-Bipy)2]n·3n(DMF) (2), and [Cd(L3)(4,4'-Bipy)]n·2n(DMF) (3) [where L1 = 5-{(4-bromobenzyl)amino}isophthalate; L2 = 5-{(4-chlorobenzyl)amino}isophthalate; L3 = 5-{(4-fluorobenzyl)amino}isophthalate; 4,4'-Bipy = 4,4'-bipyridine; and DMF = N,N'-dimethylformamide] have been synthesized under solvothermal conditions and characterized by various analytical techniques. The single-crystal X-ray diffraction analysis demonstrated that all the MOFs feature a similar type of three-dimensional structure having a binuclear [Cd2(COO)4(N)4] secondary building block unit. Moreover, MOFs 1 and 2 contain one-dimensional channels along the b-axis, whereas MOF 3 possesses a 1D channel along the a-axis. In these MOFs, the pores are decorated with multifunctional groups, i.e., halogen and amine. The gas adsorption analysis of these MOFs demonstrate that they display high uptake of CO2 (up to 5.34 mmol/g) over N2 and CH4. The isosteric heat of adsorption (Qst) value for CO2 at zero loadings is in the range of 18-26 kJ mol-1. In order to understand the mechanism behind the better adsorption of CO2 by our MOFs, we have also performed configurational bias Monte Carlo simulation studies, which confirm that the interaction between our MOFs and CO2 is stronger compared to those with N2 and CH4. Various noncovalent interactions, e.g., halogen (X)···O, Cd···O, and O···O, between CO2 and the halogen atom, the Cd(II) metal center, and the carboxylate group from the MOFs are observed, respectively, which may be a reason for the higher carbon dioxide adsorption. Ideal adsorbed solution theory (IAST) calculations of MOF 1 demonstrate that the obtained selectivity values for CO2/CH4 (50:50) and CO2/N2 (15:85) are ca. 28 and 193 at 273 K, respectively. However, upon increasing the temperature to 298 K, the selectivity value (S = 34) decreases significantly for the CO2/N2 mixture. We have also calculated the breakthrough analysis curves for all the MOFs using mixtures of CO2/CH4 (50:50) and CO2/N2 (50:50 and 15:85) at different entering gas velocities and observed larger retention times for CO2 in comparison with other gases, which also signifies the stronger interaction between our MOFs and CO2. Moreover, due to the presence of Lewis acidic metal centers, these MOFs act as heterogeneous catalysts for the CO2 fixation reactions with different epoxides in the presence of tetrabutyl ammonium bromide (TBAB), for conversion into industrially valuable cyclic carbonates. These MOFs exhibit a high conversion (96-99%) of epichlorohydrin (ECH) to the corresponding cyclic carbonate 4-(chloromethyl)-1,3-dioxolan-2-one after 12 h of reaction time at 1 bar of CO2 pressure, at 65 °C. The MOFs can be reused up to four cycles without compromising their structural integrity as well as without losing their activity significantly.

Catalytic ozonation of multi-VOCs mixtures over Cr-based bimetallic oxides catalysts from simulated flue gas: Effects of NO/SO2/H2O.

Different Cr-based bimetallic oxides were prepared, and their catalytic performance was evaluated on the simultaneous removal of multi-VOCs mixtures (acetone, benzene, toluene, and o-xylene) by ozonation. Among them, Co-Cr catalyst stood out in catalytic ozonation of aromatic VOCs, and its activity on acetone conversion was promoted by raising the temperature and ozone concentrations, owing to lower crystallization, larger surface area, excellent redox and VOCs/CO2 desorption ability. Above 95% conversion of all multi-VOCs was achieved over the Co-Cr catalyst when the temperature was 100 °C and an excess ozone ratio λ (the ratio of actual moles of ozone to theoretical moles of ozone needed) was equal to 3. A competitive relationship was noticed during the removal process of four multiple VOCs, with significant inhibition of acetone conversion in the presence of aromatic VOCs, conceivably due to adsorption competition and byproducts accumulation. Effects of NO/SO2/H2O and respective reversibility were also investigated. The inhibition effects of NO/SO2/H2O on aromatic VOCs were far less than those on acetone. Further, the retarding effect of NO was reversible, attributing to physical adsorption competition, but the inhibition effect of SO2/H2O was irreversible, due to the blockage of active sites for VOCs removal. With the combination of scrubbing, multi-VOCs and NO/SO2 could be removed by catalytic ozonation simultaneously and efficiently. In-situ DRIFTS measurement was also conducted to investigate the adsorption and catalytic ozonation process of multi-VOCs mixtures, as well as under the presence of SO2/H2O, discovering the major intermediates, surface carboxylates and carboxylic acids.

Iron(III) Arylhydrazone Complexes Immobilized on Amine-Functionalized Mesoporous Silica: Catalysts for the Valorization of Biomass-Derived Furfuryl Alcohol.

The aquasoluble FeIII complexes [Fe(H2 O)3 (L1 )] ⋅ 4H2 O (Fe1) and [Fe(H2 O)3 (L2 )] ⋅ 3H2 O (Fe2), bearing the basic forms of 5-chloro-3-(2-(4,4-dimethyl-2,6-dioxocyclohexylidene)hydrazinyl)-2-hydroxy-benzenesulfonic acid (H3 L1 ) and 3-(2-(2,4-dioxopentan-3-ylidene)hydrazinyl)-2-hydroxy-5-nitrobenzenesulfonic acid (H3 L2 ), were incorporated for the first time into amine-functionalized SBA-15 support via an impregnation method. The successful preparation of the composites was confirmed by Fourier-Transform Infrared spectroscopy (FT-IR), powder X-ray diffraction (XRD), scanning electron microscope (SEM/EDS), transmission electron microscopy (TEM), elemental analysis, and nitrogen adsorption-desorption isotherms. The resulting Fe1@aptesSBA-15 and Fe2@aptesSBA-15 composites were tested as the first SBA-15-based heterogeneous catalysts for the conversion of furfuryl alcohol under mild reaction conditions (80 to 100 °C) and with an environmentally friendly oxidant (TBHP, 70 % aq. sol. with 1 : 1 oxidant/substrate molar ratio). The influence of various factors, such as reaction time, amounts of oxidant and catalyst, was investigated. The reaction time can be fairly reduced by adopting a microwave-assisted method allowing it to reach complete conversion after 0.25 h, in the absence of any added solvent or additive. Under these conditions, a vigorous furfuryl alcohol polymerization process occurred, with furfural as a by-product. Recycling studies were carried out for Fe2@aptesSBA-15 and after four consecutive runs, the overall conversion of furfuryl alcohol remained high (≥99 %), without an appreciable change in the obtained yield.

Plasmonic Metal Nanoparticles Hybridized with 2D Nanomaterials for SERS Detection: A Review.

In SERS analysis, the specificity of molecular fingerprints is combined with potential single-molecule sensitivity so that is an attractive tool to detect molecules in trace amounts. Although several substrates have been widely used from early on, there are still some problems such as the difficulties to bind some molecules to the substrate. With the development of nanotechnology, an increasing interest has been focused on plasmonic metal nanoparticles hybridized with (2D) nanomaterials due to their unique properties. More frequently, the excellent properties of the hybrids compounds have been used to improve the drawbacks of the SERS platforms in order to create a system with outstanding properties. In this review, the physics and working principles of SERS will be provided along with the properties of differently shaped metal nanoparticles. After that, an overview on how the hybrid compounds can be engineered to obtain the SERS platform with unique properties will be given.

Effect of Graphene vs. Reduced Graphene Oxide in Gold Nanoparticles for Optical Biosensors-A Comparative Study.

Aiming to develop a nanoparticle-based optical biosensor using gold nanoparticles (AuNPs) synthesized using green methods and supported by carbon-based nanomaterials, we studied the role of carbon derivatives in promoting AuNPs localized surface plasmon resonance (LSPR), as well as their morphology, dispersion, and stability. Carbon derivatives are expected to work as immobilization platforms for AuNPs, improving their analytical performance. Gold nanoparticles (AuNPs) were prepared using an eco-friendly approach in a single step by reduction of HAuCl4·3H2O using phytochemicals (from tea) which act as both reducing and capping agents. UV-Vis spectroscopy, transmission electron microscopy (TEM), zeta potential (ζ-potential), and X-ray photoelectron spectroscopy (XPS) were used to characterize the AuNPs and nanocomposites. The addition of reduced graphene oxide (rGO) resulted in greater dispersion of AuNPs on the rGO surface compared with carbon-based nanomaterials used as a support. Differences in morphology due to the nature of the carbon support were observed and are discussed here. AuNPs/rGO seem to be the most promising candidates for the development of LSPR biosensors among the three composites we studied (AuNPs/G, AuNPs/GO, and AuNPs/rGO). Simulations based on the Mie scattering theory have been used to outline the effect of the phytochemicals on LSPR, showing that when the presence of the residuals is limited to the formation of a thin capping layer, the quality of the plasmonic resonance is not affected. A further discussion of the application framework is presented.

Green synthesis of zinc oxide particles with apple-derived compounds and their application as catalysts in the transesterification of methyl benzoates.

ZnO nanoparticles (ZnONPs) were successfully synthesized using bravo-de-esmolfe apple extract in aqueous medium at room temperature. ZnO microparticles, prepared with a pure apple phytochemical, quercetin (ZnOq), or without phytochemicals (ZnO) were studied for comparative purposes. The re-use of apple waste for highly efficient catalyst production, based on green synthetic routes, can be added to the concept of a circular economy. The synthesized ZnO particles were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and N2 adsorption/desorption Brunauer-Emmett-Teller (BET) theory. The XRD patterns indicated the formation of a hexagonal wurtzite phase with high purity and SEM and TEM analyses revealed the morphology of the particles. The apple extract produced spherical ZnONPs composed of round lamina-like structures, similar to the micro sized lamina-like shape of ZnOq and dissimilar to the flower-like shape of ZnO. The green synthesized ZnO nanoparticles (ZnONPs) led to a high product yield of ca. 96% within 24 h of reaction time in the transesterification reaction of different carboxylic esters.

1D Copper(II)-Aroylhydrazone Coordination Polymers: Magnetic Properties and Microwave Assisted Oxidation of a Secondary Alcohol.

The 1D Cu(II) coordination polymers [Cu3(L1)(NO3)4(H2O)2]n (1) and [Cu2(H2L2)(NO3)(H2O)2]n(NO3)n (2) have been synthesized using the aroylhyrazone Schiff bases N' 1,N' 2-bis(pyridin-2-ylmethylene)oxalohydrazide (H2L1) and N' 1,N' 3-bis(2-hydroxybenzylidene)malonohydrazide (H4L2), respectively. They have been characterized by elemental analysis, infrared (IR) spectroscopy, UV-Vis spectroscopy, electrospray ionization mass spectrometry (ESI-MS), single crystal X-ray diffraction and variable temperature magnetic susceptibility measurements (for 2). The ligand (L1)2- coordinates in the iminol form in 1, whereas the amide coordination is observed for (H2L2)2- in 2. Either the ligand bridge or the nitrate bridge in 2 mediates weak antiferromagnetic coupling. The catalytic performance of 1 and 2 has been investigated toward the solvent-free microwave-assisted oxidation of a secondary alcohol (1-phenylethanol used as model substrate). At 120°C and in the presence of the nitroxyl radical 2,2,6,6-tetramethylpiperydil-1-oxyl (TEMPO), the complete conversion of 1-phenylethanol into acetophenone occurs with TOFs up to 1,200 h-1.

Ultrasound and Radiation-Induced Catalytic Oxidation of 1-Phenylethanol to Acetophenone with Iron-Containing Particulate Catalysts.

Iron-containing particulate catalysts of 0.1-1 µm size were prepared by wet and ball-milling procedures from common salts and characterized by FTIR, TGA, UV-Vis, PXRD, FEG-SEM, and XPS analyses. It was found that when the wet method was used, semi-spherical magnetic nanoparticles were formed, whereas the mechanochemical method resulted in the formation of nonmagnetic microscale needles and rectangles. Catalytic activity of the prepared materials in the oxidation of 1-phenylethanol to acetophenone was assessed under conventional heating, microwave (MW) irradiation, ultrasound (US), and oscillating magnetic field of high frequency (induction heating). In general, the catalysts obtained by wet methods exhibit lower activities, whereas the materials prepared by ball milling afford better acetophenone yields (up to 83%). A significant increase in yield (up to 4 times) was observed under the induction heating if compared to conventional heating. The study demonstrated that MW, US irradiations, and induction heating may have great potential as alternative ways to activate the catalytic system for alcohol oxidation. The possibility of the synthesized material to be magnetically recoverable has been also verified.

Antiproliferative activity of heterometallic sodium and potassium-dioxidovanadium(V) polymers.

The syntheses of the heterometallic sodium and potassium-dioxidovanadium 2D polymers, [NaVO2(1κNOO';2κO"-L)(H2O)]n(1) and [KVO2(1κNOO';2κO';3κO"-L)(EtOH)]n(2) (where the κ notation indicates the coordinating atoms of the polydentate ligand L) derived from (3,5-di-tert-butyl-2-hydroxybenzylidene)-2-hydroxybenzohydrazide (H2L) are reported. The polymers were characterized by IR, NMR, elemental analysis and single crystal X-ray diffraction analysis. The antiproliferative potential of 1 and 2 was examined towards four human cancer cell lines (ovarian carcinoma, A2780, colorectal carcinoma, HCT116, prostate carcinoma, PC3 and breast adenocarcinoma, MCF-7cell lines) and normal human fibroblasts. Complex 1 and 2 showed the highest cytotoxic activity against A2780 cell line (IC50 8.2 and 11.3 µM, respectively) with 1 > 2 and an IC50 in the same range as cisplatin (IC50 3.4 µM; obtained in the same experimental conditions) but, interestingly, with no cytotoxicity to healthy human fibroblasts for concentrations up to 75 µM. This high cytotoxicity of 1 in ovarian cancer cells and its low cytotoxicity in healthy cells demonstrates its potential for further biological studies. Our results suggest that both complexes induce ovarian carcinoma cell death via apoptosis and autophagy, but autophagy is the main biological cause of the reduction of viability observed and that ROS (reactive oxygen species) may play an important role in triggering cell death.

Cu(ii) complexes of N-rich aroylhydrazone: magnetism and catalytic activity towards microwave-assisted oxidation of xylenes.

The new aroylhydrazone N'-(di(pyridin-2-yl)methylene)pyrazine-2-carbohydrazide (HL) species, rich in N-donor sites, has been used to synthesize Cu(ii) compounds with different nuclearities, viz. the binuclear [Cu2(µ-1κN3,2κN2O-L)(Cl)3(MeOH)] (1), the octanuclear [Cu4(µ-1κN3,2κN2O-L)2(µ-Cl)3(Cl)3]2 (2) and the 1D coordination polymer [Cu3(µ3-1κN3,2κN2O,3κN-L)(µ-NO3)(NO3)3(H2O)3]n·nNO3 (3). They have been characterized by elemental analysis, FT-IR and single crystal X-ray diffraction. The magnetic properties of 2 and 3 have been explored using variable temperature magnetic measurements. The catalytic performances of the compounds were evaluated towards the peroxidative oxidation of o-, p- and m-xylenes under microwave irradiation, leading to the formation of the corresponding methyl benzyl alcohol, tolualdehyde and toluic acid as the major products. Complex 3 exhibits the best catalytic activity towards the oxidation of p-xylene with a total yield of 37% (4-methylbenzyl alcohol + p-tolualdehyde + p-toluic acid).

Synergistic catalytic action of vanadia-titania composites towards the microwave-assisted benzoin oxidation.

Intensification of chemical processes according to the motto "faster, simpler, greener" is among the main concerns nowadays. One of the ways of intensification is the application of synergistic catalytic effects when the overall efficiency of a composite catalyst is much higher than the sum of the component activities. Here, we report on the preparation of synergistic catalytic materials by a simple and straightforward ball milling procedure. Oxidation of benzoin was selected as a model reaction to demonstrate the viability of the concept. For the V2O5-TiO2 (95 : 5) composite material, the synergistic effect is triggered by low power microwave irradiation with more than a tenfold jump in the catalytic activity in comparison to the activities of the individual components.

Peroxidative Oxidation of Alkanes and Alcohols under Mild Conditions by Di- and Tetranuclear Copper (II) Complexes of Bis (2-Hydroxybenzylidene) Isophthalohydrazide.

Bis(2-hydroxybenzylidene)isophthalohydrazide (H4L) has been used to synthesize the dinuclear [Cu2(1κNO²:2κN'O'²-H2L)(NO3)2(H2O)2] (1) and the tetranuclear [Cu4(µ-1κNO²:2κN'O²-H2L)2(µ-NO3)2(H2O)4]·2C2H5OH (2) complexes. The solvent plays an important role in determining the ligand behaviour in the syntheses of the complexes. An ethanol-acetonitrile mixture of solvents favours partials enolization in the case of 2. Both complexes have been characterized by elemental analysis, infrared radiation (IR), single crystal X-ray crystallography and electrochemical methods. The variable temperature magnetic susceptibility measurements of 2 show strong antiferromagnetic coupling between the central nitrato-bridged Cu (II) ions. The catalytic activity of both 1 and 2 has been screened toward the solvent-free microwave-assisted oxidation of alcohols and the peroxidative oxidation of alkanes under mild conditions. Complex 1 exhibits the highest activity for both oxidation reactions, leading selectively to a maximum product yield of 99% (for the 1-phenylethanol oxidation after 1 h without any additive) and 13% (for the cyclohexane oxidation to cyclohexyl hydroperoxide, cyclohexanol and cyclohexanone after 3 h).

Comparison of microwave and mechanochemical energy inputs in the catalytic oxidation of cyclohexane.

The effect of microwave and mechanochemical ball milling energy inputs was studied for the peroxidative oxidation (with aqueous H2O2) of cyclohexane to cyclohexanol and cyclohexanone, over CoCl2 and/or V2O5 dispersed (µm scale) catalysts. A maximum total yield of cyclohexanol and cyclohexanone of 43% after 1 h of reaction at 30 °C, in acetonitrile and under microwave irradiation (5 W), was achieved over the CoCl2-V2O5 (3 : 1) catalyst prepared by ball milling. Cyclohexanol is the main final product with a selectivity of up to 93% over cyclohexanone. Conducting the oxidation reaction under microwave irradiation under the same conditions but without any mechanochemical treatment of the catalyst prior to use resulted in a lower total yield of 30% with a lower selectivity (69%) towards cyclohexanol over cyclohexanone. The sole application of mechanochemical treatment for the catalyst preparation and the catalytic oxidation of cyclohexane allowed to reach yields of 29% after 1 h of reaction, at room temperature, without microwave irradiation and any additive and in the absence of any organic solvent. Ball milling is shown to provide a convenient, solvent-free method to disperse these solid catalysts and to promote the above cyclohexane oxidation, although, in the latter case, not so effectively as microwave irradiation.

Effect of Phenolic Compounds on the Synthesis of Gold Nanoparticles and its Catalytic Activity in the Reduction of Nitro Compounds.

Gold nanoparticles (AuNPs) were prepared using an eco-friendly approach in a single step by reduction of HAuCl4 with polyphenols from tea extracts, which act as both reducing and capping agents. The obtained AuNPs were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), ultraviolet⁻visible spectroscopy (UV⁻vis), and X-ray photoelectron spectroscopy (XPS). They act as highly efficient catalysts in the reduction of various aromatic nitro compounds in aqueous solution. The effects of a variety of factors (e.g., reaction time, type and amount of reducing agent, shape, size, or amount of AuNPs) were studied towards the optimization of the processes. The total polyphenol content (TPC) was determined before and after the catalytic reaction and the results are discussed in terms of the tea extract percentage, the size of the AuNPs, and their catalytic activity. The reusability of the AuNP catalyst in the reduction of 4-nitrophenol was also tested. The reactions follow pseudo first-order kinetics.

Metal Azolate/Carboxylate Frameworks as Catalysts in Oxidative and C-C Coupling Reactions.

The five metal azolate/carboxylate (MAC) compounds [Cd(dmpzc)(DMF)(H2O)] (Cd-dmpzc), [Pd(H2dmpzc)2Cl2] (Pd-dmpzc), [Cu(Hdmpzc)2] (Cu-dmpzc), [Zn4O(dmpzc)3]·Solv (Zn-dmpzc·S), and [Co4O(dmpzc)3]·Solv (Co-dmpzc·S) were isolated by coupling 3,5-dimethyl-1H-pyrazol-4-carboxylic acid (H2dmpzc) to cadmium(II), palladium(II), copper(II), zinc(II), and cobalt(II) salts. While Cd-dmpzc and Pd-dmpzc had never been prepared in the past, for Cu-dmpzc, Zn-dmpzc·S, and Co-dmpzc·S we optimized alternative synthetic paths that, in the case of the copper(II) and cobalt(II) derivatives, are faster and grant higher yields than the previously reported ones. The crystal structure details were determined ab initio (Cd-dmpzc and Pd-dmpzc) or refined (Cu-dmpzc, Zn-dmpzc·S, and Co-dmpzc·S) by means of powder X-ray diffraction (PXRD). While Cd-dmpzc is a nonporous 3D MAC framework, Pd-dmpzc shows a 3D hybrid coordination/hydrogen-bonded network, in which Pd(H2dmpzc)2Cl2 monomers are present. The thermal behavior of the five MAC compounds was investigated by coupling thermal analysis to variable-temperature PXRD. Their catalytic activity was assessed in oxidative and C-C coupling reactions, with the copper(II) and cadmium(II) derivatives being the first nonporous MAC frameworks to be tested as catalysts. Cu-dmpzc is the most active catalyst in the partial oxidation of cyclohexane by tert-butyl hydroperoxide in acetonitrile (yields up to 12% after 9 h) and is remarkably active in the solvent-free microwave-assisted oxidation of 1-phenylethanol to acetophenone (yields up to 99% at 120 °C in only 0.5 h). On the other hand, activated Zn-dmpzc·S (Zn-dmpzc) is the most active catalyst in the Henry C-C coupling reaction of aromatic aldehydes with nitroethane, showing appreciable diastereoselectivity toward the syn-nitroalkanol isomer (syn:anti selectivity up to 79:21).

Aroylhydrazone Cu(II) Complexes in keto Form: Structural Characterization and Catalytic Activity towards Cyclohexane Oxidation.

The reaction of the Schiff base (3,5-di-tert-butyl-2-hydroxybenzylidene)-2-hydroxybenzohydrazide (H3L) with a copper(II) salt of a base of a strong acid, i.e., nitrate, chloride or sulphate, yielded the mononuclear complexes [Cu(H2L)(NO3)(H2O)] (1), [Cu(H2L)Cl]·2MeOH (2) and the binuclear complex [{Cu(H2L)}2(µ-SO4)]·2MeOH (3), respectively, with H2L(-) in the keto form. Compounds 1-3 were characterized by elemental analysis, Infrared (IR) spectroscopy, Electrospray Ionisation Mass Spectrometry (ESI-MS) and single crystal X-ray crystallography. All compounds act as efficient catalysts towards the peroxidative oxidation of cyclohexane to cyclohexyl hydroperoxide, cyclohexanol and cyclohexanone, under mild conditions. In the presence of an acid promoter, overall yields (based on the alkane) up to 25% and a turnover number (TON) of 250 (TOF of 42 h(-1)) after 6 h, were achieved.

New RuII (arene) complexes with halogen-substituted bis- and tris(pyrazol-1-yl)borate ligands.

[RuCl(arene)(µ-Cl)]2 dimers were treated in a 1:2 molar ratio with sodium or thallium salts of bis- and tris(pyrazolyl)borate ligands [Na(Bp(Br3))], [Tl(Tp(Br3))], and [Tl(Tp(iPr, 4Br))]. Mononuclear neutral complexes [RuCl(arene)(κ(2)-Bp(Br3))] (1: arene=p-cymene (cym); 2: arene=hexamethylbenzene (hmb); 3: arene=benzene (bz)), [RuCl(arene)(κ(2)-Tp(Br3))] (4: arene=cym; 6: arene=bz), and [RuCl(arene)(κ(2)-Tp(iPr, 4Br))] (7: arene=cym, 8: arene=hmb, 9: arene=bz) have been always obtained with the exception of the ionic [Ru2 (hmb)2-(µ-Cl)3][Tp(Br3)] (5'), which formed independently of the ratio of reactants and reaction conditions employed. The ionic [Ru-(CH3OH)(cym)(κ(2)-Bp(Br3))][X] (10: X=PF6, 12: X=O3SCF3) and the neutral [Ru(O2CCF3)(cym)(κ(2)-Bp(Br3))] (11) have been obtained by a metathesis reaction with corresponding silver salts. All complexes 1-12 have been characterized by analytical and spectroscopic data (IR, ESI-MS, (1)H and (13)C NMR spectroscopy). The structures of the thallium and calcium derivatives of ligand Tp(Br3), [Tl(Tp(Br3))] and [Ca(dmso)6][Tp(Br3)]2 ⋅2 DMSO, of the complexes 1, 4, 5', 6, 11, and of the decomposition product [RuCl(cym)(Hpz(iPr, 4Br))2][Cl] (7') have been confirmed by using single-crystal X-ray diffraction. Electrochemical studies showed that 1-9 and 11 undergo a single-electron Ru(II) →Ru(III) oxidation at a potential, measured by cyclic voltammetry, which allows comparison of the electron-donor characters of the bis- and tris(pyrazol-1-yl)borate and arene ligands, and to estimate, for the first time, the values of the Lever EL ligand parameter for Bp(Br3), Tp(Br3), and Tp(iPr, 4Br). Theoretical calculations at the DFT level indicated that both oxidation and reduction of the Ru complexes under study are mostly metal-centered with some involvement of the chloride ligand in the former case, and also demonstrated that the experimental isolation of the µ(3)-binuclear complex 5' (instead of the mononuclear 5) is accounted for by the low thermodynamic stability of the latter species due to steric reasons.

Dinuclear Mn(II,II) complexes: magnetic properties and microwave assisted oxidation of alcohols.

A series of six new mixed-ligand dinuclear Mn(II,II) complexes of three different hydrazone Schiff bases (H3L(1), H3L(2) and H3L(3)), derived from condensation of the aromatic acid hydrazides benzohydrazide, 2-aminobenzohydrazide or 2-hydroxybenzohydrazide, with 2,3-dihydroxy benzaldehyde, respectively, is reported. Reactions of Mn(NO3)2·4H2O with the H3L(1-3) compounds, in the presence of pyridine (1 : 1 : 1 mole ratio), in methanol at room temperature, yield [Mn(H2L(1))(py)(H2O)]2(NO3)2·2H2O (1·2H2O), [Mn(H2L(2))(py)(CH3OH)]2(NO3)2·4H2O (2·4H2O) and [Mn(H2L(3))(py)(H2O)]2(NO3)2 (3) respectively, whereas the use of excess pyridine yields complexes with two axially coordinated pyridine molecules at each Mn(II) centre, viz. [Mn(H2L(1))(py)2]2(NO3)2·H2O (4·H2O), [Mn(H2L(2))(py)2]2(NO3)2·2H2O (5·2H2O) and [Mn(H2L(3))(py)2]2(NO3)2·2CH3OH (6·2CH3OH), respectively. In all the complexes, the (H2L(1-3))(-) ligand coordinates in the keto form. Complexes 1·2H2O, 2·4H2O, 4·H2O, 5·2H2O and 6·2CH3OH are characterized by single crystal X-ray diffraction analysis. The complexes 1, 2 and 6, having different coordination environments, have been selected for variable temperature magnetic susceptibility measurements to examine the nature of magnetic interaction between magnetically coupled Mn(II) centres and also for exploration of the catalytic activity towards microwave assisted oxidation of alcohols. A yield of 81% (acetophenone) is obtained using a maximum of 0.4% molar ratio of catalyst relative to the substrate in the presence of TEMPO and in aqueous basic solution, under mild conditions.

Synthesis and characterization of copper(II) 4'-phenyl-terpyridine compounds and catalytic application for aerobic oxidation of benzylic alcohols.

The reactions between 4'-phenyl-terpyridine (L) and nitrate, acetate or chloride Cu(II) salts led to the formation of [Cu(NO3)2L] (1), [Cu(OCOCH3)2L]·CH2Cl2 (2·CH2Cl2) and [CuCl2L]·[Cu(Cl)(µ-Cl)L]2 (3), respectively. Upon dissolving 1 in mixtures of DMSO-MeOH or EtOH-DMF the compounds [Cu(H2O){OS(CH3)2}L](NO3)2 (4) and [Cu(HO)(CH3CH2OH)L](NO3) (5) were obtained, in this order. Reaction of 3 with AgSO3CF3 led to [CuCl(OSO2CF3)L] (6). The compounds were characterized by ESI-MS, IR, elemental analysis, electrochemical techniques and, for 2-6, also by single crystal X-ray diffraction. They undergo, by cyclic voltammetry, two single-electron irreversible reductions assigned to Cu(II) → Cu(I) and Cu(I) → Cu(0) and, for those of the same structural type, the reduction potential appears to correlate with the summation of the values of the Lever electrochemical EL ligand parameter, which is reported for the first time for copper complexes. Complexes 1-6 in combination with TEMPO (2,2,6,6-tetramethylpiperidinyl-1-oxyl radical) can exhibit a high catalytic activity, under mild conditions and in alkaline aqueous solution, for the aerobic oxidation of benzylic alcohols. Molar yields up to 94% (based on the alcohol) with TON values up to 320 were achieved after 22 h.

Homo- and heteropolymetallic 3-(2-pyridyl)pyrazolate manganese and rhenium complexes.

fac-[MBr(CO)3(pypzH)] (M = Mn, Re; pypzH = (3-(2-pyridyl)pyrazole) complexes are prepared from fac-[MBr(CO)3(NCMe)2] and pypzH. The result of their deprotonation depends on the metallic substrate: the rhenium complex affords cleanly the bimetallic compound [fac-{Re(CO)3(µ(2)-pypz)}]2 (µ(2)-pypz = µ(2)-3-(2-pyridyl-κ(1)N)pyrazolate-2κ(1)N), which was crystallographically characterized, whereas a similar manganese complex was not detected. When two equivalents of pyridylpyrazolate are used, polymetallic species [fac-M(CO)3(µ(2)-pypz)(µ(3)-pypz)M'] (µ(3)-pypz = µ(3)-3-(2-pyridyl-κ(1)N)pyrazolate-1κ(2)N,N:2κ(1)N:; M = Mn, M' = Li, Na, K; M = Re, M' = Na) are obtained. The crystal structures of the manganese carbonylate complexes were determined. The lithium complex is a monomer containing one manganese and one lithium atom, whereas the sodium and potassium complexes are dimers and reveal an unprecedented coordination mode for the bridging 3-(2-pyridyl)pyrazolate ligand, where the nitrogen of the pyridyl fragment and the nitrogen-1 of pyrazolate are chelated to manganese atoms, and each nitrogen-2 of pyrazolate is coordinated to two alkaline atoms. The polymetallic carbonylate complexes are unstable in solution and evolve spontaneously to [fac-{Re(CO)3(µ(2)-pypz)}]2 or to the trimetallic paramagnetic species [Mn(II)(µ(2)-pypz)2{fac-{Mn(I)(CO)3(µ(2)-pypz)}2}]. The related complex cis-[MnCl2(pypzH)2] was also synthesized and structurally characterized. The electrochemical behavior of the new homo- and heteropolymetallic 3-(2-pyridyl)pyrazolate complexes has been studied and details of their redox properties are reported.