C60 in water: nanocrystal formation and microbial response.

Upon contact with water, under a variety of conditions, C60 spontaneously forms a stable aggregate with nanoscale dimensions (d = 25-500 nm), termed here "nano-C60". The color, hydrophobicity, and reactivity of individual C60 are substantially altered in this aggregate form. Herein, we provide conclusive lines of evidence demonstrating that in solution these aggregates are crystalline in order and remain as underivatized C60 throughout the formation/stabilization process that can later be chemically reversed. Particle size can be affected by formation parameters such as rates and the pH of the water addition. Once formed, nano-C60 remains stable in solution at or below ionic strengths of 0.05 I for months. In addition to demonstrating aggregate formation and stability over a wide range of conditions, results suggest that prokaryotic exposure to nano-C60 at relatively low concentrations is inhibitory, indicated by lack of growth (> or = 0.4 ppm) and decreased aerobic respiration rates (4 ppm). This work demonstrates the fact that the environmental fate, distribution, and biological risk associated with this important class of engineered nanomaterials will require a model that addresses not only the properties of bulk C60 but also that of the aggregate form generated in aqueous media.

Formation, isolation, spectroscopic properties, and calculated properties of some isomers of C(60)H(36).

Isomers of C(60)H(36) and He@C(60)H(36) have been synthesized by the Birch or dihydroanthracene reduction of C(60) and isolated by preparative high-pressure liquid chromatography. (3)He, (13)C, and (1)H NMR spectroscopic properties were then determined. A comparison of experimental chemical shifts against those computed using density functional theory (B3LYP) with polarized triple- and double-zeta basis sets for He and C,H, respectively, allowed provisional assignment of structure for several isomers to be made. Theoretical calculations have also been carried out to identify low-energy structures. The transfer hydrogenation method using dihydroanthracene gives a major C(60)H(36) isomer and a minor C(60)H(36) isomer with C(3) symmetry as determined by the (13)C NMR spectrum of C(60)H(36) and the (3)He NMR spectrum of the corresponding sample of (3)He@C(60)H(36). In view of the HPLC retention times and the (3)He chemical shifts observed for the Birch and dihydroanthracene reduction products, the two isomers generated by the latter procedure can be only minor isomers of the Birch reduction. A significant energy barrier apparently exists in the dihydroanthracene reduction of C(60) for the conversion of the C(3) and C(1) symmetry isomers of C(60)H(36) to the T symmetry isomer previously predicted by many calculations to be among the most stable C(60)H(36) isomers. Many of the (1)H NMR signals exhibited by C(60)H(36) (and C(60)H(18), previously reported) are unusually deshielded compared to "ordinary" organic compounds, presumably because the unusual structures of C(60)H(36) and C(60)H(18) result in chemical shift tensors with one or more unusual principal values. Calculations clearly show a relationship between exceptionally deshielded protons beta to a benzene ring in C(60)H(18) and C(60)H(36) and relatively long C-C bonds associated with these protons. The additional information obtained from 1D and 2D (1)H NMR spectra obtained at ultrahigh field strengths (up to 900 MHz) will serve as a critical test of chemical shifts to be obtained from future calculations on different C(60)H(36) isomers.

Thermolysis of free-radical initiators: tert-butylazocumene and its 1,3- and 1,4-bisazo and 1,3,5-trisazo analogues.

Four tert-butylazocumenes (4-7) were prepared from the corresponding cyanobenzenes, and their nitrogen evolution kinetics and products were analyzed. In combination with TEMPO, the simplest compound, tert-butylazocumene (4), shows promise as a "one-radical" initiator of styrene polymerization. The ABNO-trapped cumyl radical 29 is a particularly stable trialkylhydroxylamine, whose thermolysis half-life is 2.1 h at 150 degrees C. Taking advantage of this stability, we trapped the cumyl radical centers from 7 to afford tris adduct 32a. While the behavior of the meta bisazoalkane 6 can be mostly predicted from that of 4, the para isomer 5 exhibits both unusual products and kinetics, attributed to the formation of quinodimethane 33 via azo-containing radical 34. In fact, flash vacuum pyrolysis of 5 allowed observation of the (1)H and (13)C NMR spectra of 33, whose persistence even at ambient temperature showed that this quinodimethane is far more stable than the parent 36. Finally, evidence is presented that 7 is an initiator of star polymerization.

Very fast MAS and MQMAS NMR studies of the spectroscopically challenging minerals kyanite and andalusite on 400, 500, and 800 MHz spectrometers.

The well-characterized minerals kyanite and andalusite have long presented great challenges in using solid state 27Al NMR to determine the isotropic chemical shift deltaCS, quadrupole coupling constant e2qQ/h, and asymmetry parameter eta for each of the inequivalent aluminum sites in these minerals. Indeed, these minerals have frequently been used to test advances in instrumentation. Recent advances in magnet technology (up to 18.8 T = 800 MHz 1H) and in MAS probe technology (spinning up to 35 kHz and considerably stronger rf) and refinements of the two-dimensional, multiple quantum magic angle spinning (MQMAS) technique suggested that these developments could be profitably used to study kyanite and andalusite by solid state 27Al NMR. The benefit of being able to study kyanite both by MAS and MQMAS techniques on 400, 500, and 800 MHz spectrometers is demonstrated. The two octahedral aluminum sites with the largest (and nearly equal) e2qQ/h values give overlapping 1D MAS or 2D 3QMAS signals at all three field strengths. Nevertheless, quantitatively accurate 3Q signal intensities at 9.4 T for all four octahedral aluminum sites (with e2qQ/h values up to 10 MHz) allow more detailed analysis. Even if the 3Q signal intensities are not quantitative, their isotropic shifts provide an approach (if accurate e2qQ/h and eta values are available) other than deconvolution of the MAS spectrum for calculating deltaCS values. For andalusite, 34 kHz MAS on the 800 MHz spectrometer significantly narrows the extremely broad signal for the octahedral aluminum, and only slight difficulties are encountered in quantitating the relative amounts of AlO5 and AlO6 present. Even with e2qQ/h = 15.3 MHz, the octahedral aluminum in andalusite gives a signal in a MQMAS experiment, albeit of reduced intensity. As appropriate, we discuss some of the benefits and limitations of these advances in instrumentation and of different experimental approaches for studying non-integral spin quadrupolar nuclei in solids.

Characterization of partially saturated poly(propylene fumarate) for orthopaedic application.

A partially saturated linear polyester based on poly(propylene fumarate) (PPF) was synthesized for potential application in filling skeletal defects. The synthesis was carried out according to a two-step reaction scheme. Propylene glycol and fumaryl chloride were first combined to form an intermediate fumaric diester. The intermediate was then subjected to a transesterification to form the PPF-based polymer. This method allowed for production of a polymer with a number average molecular weight up to 1500 and a polydispersity index of 2.8 and below. The polymeric backbone structure was investigated through the use of FTIR and NMR. Kinetic studies of the transesterification allowed mapping of the molecular weight increase with reaction time. The final product was also characterized by thermal and solubility analysis.