RESUMEN
Harvesting renewable mechanical energy is envisioned as a promising and sustainable way for power generation. Many recent mechanical energy harvesters are able to produce instantaneous (pulsed) electricity with a high peak voltage of over 100 V. However, directly storing such irregular high-voltage pulse electricity remains a great challenge. The use of extra power management components can boost storage efficiency but increase system complexity. Here utilizing the conducting polymer PEDOT:PSS, high-rate metal-free micro-supercapacitor (MSC) arrays are successfully fabricated for direct high-efficiency storage of high-voltage pulse electricity. Within an area of 2.4 × 3.4 cm2 on various paper substrates, large-scale MSC arrays (comprising up to 100 cells) can be printed to deliver a working voltage window of 160 V at an ultrahigh scan rate up to 30 V s-1. The ultrahigh rate capability enables the MSC arrays to quickly capture and efficiently store the high-voltage (≈150 V) pulse electricity produced by a droplet-based electricity generator at a high efficiency of 62%, significantly higher than that (<2%) of the batteries or capacitors demonstrated in the literature. Moreover, the compact and metal-free features make these MSC arrays excellent candidates for sustainable high-performance energy storage in self-charging power systems.
RESUMEN
The trend of research towards more sustainable materials is pushing the application of biopolymers in a variety of unexplored fields. In this regard, hydrogels are attracting significant attention as electrolytes for flexible electrochemical devices thanks to their combination of ionic conductivity and mechanical properties. In this context, we present the use of cellulose-based hydrogels as aqueous electrolytes for electrochemical devices. These materials were obtained by crosslinking of hydroxyethyl cellulose (HEC) with divinyl sulfone (DVS) in the presence of carboxymethyl cellulose (CMC), creating a semi-IPN structure. The reaction was confirmed by NMR and FTIR. The small-amplitude oscillatory shear (SAOS) technique revealed that the rheological properties could be conveniently varied by simply changing the gel composition. Additionally, the hydrogels presented high ionic conductivity in the range of mS cm-1. The ease of synthesis and processing of the hydrogels allowed the assembly of an all-in-one electrochromic device (ECD) with high transmittance variation, improved switching time and good color efficiency. On the other hand, the swelling ability of the hydrogels permits the tuning of the electrolyte to improve the performance of a printed Zinc/MnO2 primary battery. The results prove the potential of cellulose-based hydrogels as electrolytes for more sustainable electrochemical devices.
RESUMEN
Electrochromic devices (ECDs) have aroused great interest because of their potential applicability in displays and smart systems, including windows, rearview mirrors, and helmet visors. In the last decades, different device structures and materials have been proposed to meet the requirements of commercial applications to boost market entry. To this end, employing simple device architectures and achieving a competitive electrolyte are crucial to accomplish easily implementable, high-performance ECDs. The present review outlines devices comprising gel electrolytes as a single electroactive layer ("all-in-one") ECD architecture, highlighting some advantages and opportunities they offer over other electrochromic systems. In this context, gel electrolytes not only overcome the drawbacks of liquid and solid electrolytes, such as liquid's low chemical stability and risk of leaking and soil's slow switching and lack of transparency, but also exhibit further strengths. These include easier processability, suitability for flexible substrates, and improved stabilization of the chemical species involved in redox processes, leading to better cyclability and opening wide possibilities to extend the electrochromic color palette, as discussed herein. Finally, conclusions and outlook are provided.
RESUMEN
Electrochromic materials have extensively been investigated because of their potential fields of application, with a significant growing interest in expanding the provided colorations. However, among all palette of colors, colorless electrochromic devices (ECDs) that provide neutral-grayish colorations with a simple configuration remain a key challenge. The present study reports on the synthesis of asymmetrically 1-alkyl-1'-aryl-substituted viologens and their incorporation in PVA-borax gel polyelectrolytes for ECDs that constitute the simplest device architecture (glass/TCO/EC gel/TCO/glass). We demonstrate herein that these EC gels based on single asymmetric viologens provide more neutral-colored state than their corresponding symmetric viologens (a* and b* ≤ |15|), while maintaining satisfactory colorless bleached state (%Tb > 70% in the whole visible range), transmittance changes (i.e., â¼60%) and cyclability (i.e., â¼15â¯000 cycles). Additionally, the effect of the solvent on the observed coloration has also been investigated. This easy-to-make neutral-grayish color ECDs may significantly extend the potential of the electrochromic technology, because they adapt better aesthetically to the surrounding environment, as they are easier to implement in different applications.
RESUMEN
Stimuli-responsive reversible coloration-change materials represent a highly demanded type of smart systems useful for a wide variety of applications, with a significant growing interest in multicolor abilities. In particular, electrochromic materials have received a great deal of attention due to their versatility and broad range of industrial uses. However, most of the existing electrochromic technologies provide a single coloration, while achieving multiple colors based on simple approaches remains a challenge. The present article reports on PVA gel-based electrochromic devices, containing a single viologen, providing a colorless and two different well-defined colored states. The successful fabrication of a device, based on two viologens (multi-EC gel) with a simple architecture (glass/TCO/multi-EC gel/TCO/glass), with five different multiswitchable colors based on four-zoned electrodes (rainbow-like ECD) is also demonstrated. This novel easy-to-make multichromic system represents a significant breakthrough toward the generation of full-color devices, expanding the potential of electrochromic technology.