Selective Detection of Paraquat in Adulterated and Complex Environmental Samples Using Raman Spectroelectrochemistry.

Growing demand for pesticides has created an environment prone to deceptive activities, where counterfeit or adulterated pesticide products infiltrate the market, often escaping rapid detection. This situation presents a significant challenge for sensor technology, crucial in identifying authentic pesticides and ensuring agricultural safety practices. Raman spectroscopy emerges as a powerful technique for detecting adulterants. Coupling the electrochemical techniques allows a more specific and selective detection and compound identification. In this study, we evaluate the efficacy of spectroelectrochemical measurements by coupling a potentiostat and Raman spectrograph to identify paraquat, a nonselective herbicide banned in several countries. Our findings demonstrate that applying -0.70 V during measurements yields highly selective Raman spectra, highlighting the primary vibrational bands of paraquat. Moreover, the selective Raman signal of paraquat was discernible in complex samples, including tap water, apple, and green cabbage, even in the presence of other pesticides such as diquat, acephate, and glyphosate. These results underscore the potential of this technique for reliable pesticide detection in diverse and complex matrices.

Investigating layer-by-layer films of carbon nanotubes and nickel phthalocyanine towards diquat detection.

The indiscriminate use of pesticides makes us susceptible to the toxicity of these chemical compounds, which may be present in high quantities in our food. It is crucial to develop inexpensive and rapid methods for determining these pesticides for government control or even for the general population. In this study, we investigated the fabrication of self-assembled LbL films using multi-walled carbon nanotubes (MWCNT) and nickel tetrasulphonated phthalocyanine (NiTsPc) as an electrochemical sensor for the herbicide Diquat (DQ). The Layer-by-Layer (LbL) assembly of the (MWCNT/NiTsPc) film was examined, along with its structural and morphological characteristics. The effect of the number of layers in DQ detection was evaluated by cyclic voltammetry, followed by the detection through differential pulse voltammetry. The achieved limit of detection was 9.62 × 10-7 mol L-1. A ~ 30% decrease in sensitivity was observed in the presence of Paraquat, a banned herbicide and electrochemical interferent due to the structural similarities, which is regularly neglected in the most published studies. The sensor was tested in real samples, demonstrating a recovery of 98.5% in organic apples.

Exploring the synergistic effects of amoxicillin and methylene blue on unsaturated lipid structures: A study of Langmuir monolayers and giant unilamellar vesicles.

The potentially toxic effects of emerging pollutant mixtures often deviate from the individual compound effects, presenting additive, synergistic, or agonistic interactions. This study delves into the complex world of emerging pollutants' mixtures, with a particular focus on their potential impact on unsaturated lipid DOPC (1,2-dioleoyl-sn-glycerol-3-phosphocholine) structured as both monolayers and bilayers, which are valuable tools for mimicking cell membranes. Specifically, we examine the effects of two common types of pollutants: antibiotics (amoxicillin) and dyes (methylene blue). Utilizing Langmuir monolayers, our research reveals a synergistic effect within the pollutant mixture, as evidenced by pressure-area isotherms and polarization-modulated infrared reflection absorption spectroscopy. We identify the specific chemical interactions contributing to this synergistic effect. Furthermore, through contrast phase microscopy experiments on giant unilamellar vesicles (bilayer system), we find that the individual pollutants and the mixture exhibit similar molecular effects on the bilayer, revealing that the molecular size is a key factor in the bilayer-mixture of pollutant interaction. This highlights the importance of considering molecular size in the interactions with bilayer systems. In summary, our research dissects the critical factors of chemical interactions and molecular size concerning the effects of pollutants on DOPC, serving as simplified models of cell membranes. This study underscores the significance of comprehending the molecular effects of emerging pollutants on human health and the development of models for exploring their intricate interactions with cell membranes.

Controlling supramolecular structures in iron tetrasulfonated phthalocyanine films through pH variation: implications for thin-film device performance.

Improving the performance of thin film-based devices is a crucial factor for their successful application, mainly for organic electronic semiconductors. The adjustment of supramolecular structuring of thin films plays a role in the optical and electrical properties. In this sense, we investigated how various pH values, such as 2.5, 6.0, and 9.0, of the solutions influenced the growth of iron tetrasulfonated phthalocyanine (FeTsPc) Layer-by-Layer (LbL) films and their respective supramolecular structures as well as their electrochemical properties. The supramolecular structures were evaluated via UV-vis absorption spectroscopy, quartz crystal microbalance (QCM), micro-Raman spectroscopy, Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and cyclic voltammetry. The different pH values of the solution induce different degrees of molecular aggregation for FeTsPc (monomer, dimer, and aggregate formation). For instance, the higher the pH, the higher the aggregation. Films produced at pH 2.5 were organized preferentially with the molecules perpendicular to the substrate, while films at pH 6.0 and 9.0 were organized preferentially with the molecules parallel to the substrate. Besides, the film produced at pH 2.5 results in higher film thickness, higher stability, and better electrocatalytic behavior for the electrochemical detection of catechol. The results presented here enhance the understanding of nanostructured films, helping to harness supramolecular organization to improve the performance of thin-film devices.

The Role of Cholesterol in the Interaction of the Lipid Monolayer with the Endocrine Disruptor Bisphenol-A.

Among pollutants of emerging concern, endocrine disruptors (ED) have been shown to cause side effects in humans and animals. Bisphenol-A (BPA) is an ED by-product of the plastic industry and one of the chemicals with the highest volume produced yearly. Here, we studied the role of cholesterol in the BPA exposure effects over membrane models. We used Langmuir films of both neat lipid DPPC (1,2-dipalmitoyl-sn-glycero-3-phosphocholine) and cholesterol (Chol) and a binary mixture containing DPPC/Chol, exposing it to BPA. We evaluate changes in the π-A isotherms and the PM-IRRAS (polarization modulation-infrared reflection adsorption spectroscopy) spectra. BPA exposure induced changes in the DPPC and Chol neat monolayers, causing mean molecular area expansion and altering profiles. However, at high surface pressure, the BPA was expelled from the air-water interface. For the DPPC/Chol mixture, BPA caused expansion throughout the whole compression, indicating that BPA is present at the monolayer interface. The PM-IRRAS analysis showed that BPA interacted with the phosphate group of DPPC through hydrogen bonding, which caused the area's expansion. Such evidence might be biologically relevant to better understand the mechanism of action of BPA in cell membranes once phosphatidylcholines and Chol are found in mammalian membranes.

Consequences of the exposure to bisphenol A in cell membrane models at the molecular level and hamster ovary cells viability.

The inadequate disposal and the difficulty in its removal from water treatment systems have made the endocrine disruptor bisphenol A (BPA) a significant hazard for humans and animals. The molecular-level mechanisms of BPA action are not known in detail, which calls for systematic investigations using cell membrane models. This paper shows that BPA affects Langmuir monolayers and giant unilamellar vesicles (GUVs) of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) used as membrane models, in a concentration-dependent manner and with effects that depend on BPA aggregation. BPA increases DPPC monolayer fluidity in surface pressure isotherms upon interacting with the headgroups through hydrogen bonding, according to polarization-modulated infrared reflection absorption spectroscopy (PM-IRRAS). In DPPC GUVs, BPA induced wrinkling and distortion in the spherical shape of the vesicles, but this was only observed for fresh solutions where it is not aggregated. BPA also decreased the viability of hamster ovary cells (CHO) in in vitro experiments. In contrast, aged, aggregated BPA solutions did not affect the GUVs and even increased CHO viability. These results may be rationalized in terms of size-dependent effects of BPA, which may be relevant for its endocrine-disrupting effects.

Lipid-matrix effects on tyrosinase immobilization in Langmuir and Langmuir-Blodgett films.

The immobilization of the enzyme tyrosinase (Tyr) in lipid matrices can be explored to produce biosensors for detecting polyphenols, which is relevant for the food industry. Herein, we shall demonstrate the importance of the lipid composition to immobilize the enzyme tyrosinase in Langmuir-Blodgett (LB) films. Tyr could be incorporated into Langmuir monolayers of arachidic acid (AA), 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and 1,2-dipalmitoyl-sn-glycero-3-phospho-(1'-rac-glycerol) (sodium salt) (DPPG), having as the main effect an expansion in the monolayers. Results from polarization-modulated infrared reflection-absorption spectroscopy (PM-IRRAS) pointed to electrostatic interactions between the charged residues of Try and the lipid headgroups, in addition to changes in the order of lipid chains. The interaction between Tyr and DPPC in Langmuir monolayers can be correlated with the superior performance of DPPC/Tyr LB films used as biosensors to detect catechol by cyclic voltammetry. The molecular-level interactions assessed via PM-IRRAS are therefore believed to drive an immobilization process for Tyr in the lipid LB matrix and may serve as a general criterion to identify matrices that preserve enzyme activity.

Supramolecular architecture and electrical conductivity in organic semiconducting thin films.

Organic thin films are an essential component of the structure of optical and electronic devices. However, the optical and electrical properties of these films depend on their supramolecular architecture, which may vary according to the techniques used to manufacture them. Here, the correlation between conductivity and supramolecular architecture was investigated. The supramolecular architecture was analyzed in terms of the molecular organization and J- or H-aggregation established during the fabrication of perylene tetracarboxylic diimide (PTCD) nanometric films. Three deposition techniques, Langmuir-Schaefer (LS), Langmuir-Blodgett (LB), and Physical Vapor Deposition (PVD), were evaluated. The UV-vis absorption spectra indicated that LS, LB, and PVD films grow homogeneously. Also, the presence of J and H aggregates was observed for all films, the H aggregates prevailing for the LB film. The FTIR measurements suggested that the molecular organization is similar for LS and LB films, with a tendency to form head-on organization onto a solid substrate. For the PVD film, the perylene macrocycles are inclined approximately 45° relative to the substrate. AFM measurements indicated a homogenous surface for all films. In terms of electrical conductivity, the highest conductivity was found for LS, followed by LB and PVD. The conductivity values were interpreted in terms of molecular organization and J- or H-aggregate formation.

Designing Silver Nanoparticles for Detecting Levodopa (3,4-Dihydroxyphenylalanine, L-Dopa) Using Surface-Enhanced Raman Scattering (SERS).

Detection of the drug Levodopa (3,4-dihydroxyphenylalanine, L-Dopa) is essential for the medical treatment of several neural disorders, including Parkinson's disease. In this paper, we employed surface-enhanced Raman scattering (SERS) with three shapes of silver nanoparticles (nanostars, AgNS; nanospheres, AgNP; and nanoplates, AgNPL) to detect L-Dopa in the nanoparticle dispersions. The sensitivity of the L-Dopa SERS signal depended on both nanoparticle shape and L-Dopa concentration. The adsorption mechanisms of L-Dopa on the nanoparticles inferred from a detailed analysis of the Raman spectra allowed us to determine the chemical groups involved. For instance, at concentrations below/equivalent to the limit found in human plasma (between 10-7-10-8 mol/L), L-Dopa adsorbs on AgNP through its ring, while at 10-5-10-6 mol/L adsorption is driven by the amino group. At even higher concentrations, above 10-4 mol/L, L-Dopa polymerization predominates. Therefore, our results show that adsorption depends on both the type of Ag nanoparticles (shape and chemical groups surrounding the Ag surface) and the L-Dopa concentration. The overall strategy based on SERS is a step forward to the design of nanostructures to detect analytes of clinical interest with high specificity and at varied concentration ranges.

Metallic Phthalocyanines: impact of the film deposition method on its supramolecular arrangement and sensor performance.

This short review gives a concise overview of the impact of deposition methods on the supramolecular arrangement of metallic phthalocyanine films and their applications. Primarily, an introduction about the possible phthalocyanine molecular structures and derivatives obtained from modification on the phthalocyanine rings was presented. The possibility of perfecting/improving the supramolecular arrangement of metallic phthalocyanine (MPcs) films by using different deposition techniques such as Langmuir-Blodgett (LB), Langmuir-Schaefer (LS), Layer-by-Layer (LbL), physical vapor deposition (PVD) and electrodeposition was discussed in further details. Herein, we highlighted some techniques used on the characterization of supramolecular arrangement (morphology, optical properties, and molecular organization), including the impact on sensing applications. The main scope of this short review is focused on the advances made in this research field in the last five years.

Surface Plasmon Resonances in Silver Nanostars.

The recent development of silver nanostars (Ag-NSs) is promising for improved surface-enhanced sensing and spectroscopy, which may be further exploited if the mechanisms behind the excitation of localized surface plasmon resonances (LSPRs) are identified. Here, we show that LSPRs in Ag-NSs can be obtained with finite-difference time-domain (FDTD) calculations by considering the nanostars as combination of crossed nanorods (Ag-NRs). In particular, we demonstrate that an apparent tail at large wavelengths ( λ ≳ 700 nm) observed in the extinction spectra of Ag-NSs is due to a strong dipolar plasmon resonance, with no need to invoke heterogeneity (different number of arms) effects as is normally done in the literature. Our description also indicates a way to tune the strongest LSPR at desired wavelengths, which is useful for sensing applications.

Supramolecular Arrangement of Iron Phthalocyanine in Langmuir-Schaefer and Electrodeposited Thin Films.

The supramolecular arrangement in thin film technology has been explored through different deposition techniques aiming to control the film properties at the molecular level. We report on the formation of iron phthalocyanine (FePc) films using both Langmuir-Schaefer (LS) and electrodeposition methods. The multilayer formation was monitored with ultraviolet-visible absorption spectroscopy (UV-vis) and electrochemical measurements. According to Raman spectroscopy, atomic force microscopy (AFM), and scanning electron microscopy (SEM), the surface morphology of electrodeposited films is more homogeneous than LS films at micro and nanometer scales. From FTIR spectroscopy, the FePc molecules in the electrodeposited films are oriented preferentially with the macrocycle parallel to the substrate surface (flat-on), while a slight tilt is suggested in LS films, being both films crystalline. Therefore, the use of different deposition techniques allowed the fabrication of thin films from FePc with distinct supramolecular arrangements, leading to distinct electrochemical properties. For instance, the electrodeposited films show higher surface coverage, suggesting a more compact structure, which favors the charge transfer and smaller energy gap. The possibility of tuning some properties according to deposition technique for the same material can help the development of technological applications such as electronic or sensing devices.

Interaction between 17 α-ethynylestradiol hormone with Langmuir monolayers: The role of charged headgroups.

The persistence of steroid hormones disposed of in the environment may pose risks to the health of humans and wildlife, which brings the need of understanding their mode of action, believed to occur in cell membranes. In this study, we investigate the molecular-level interactions between the synthetic hormone 17 α-ethynylestradiol (EE2) and Langmuir monolayers that represent simplified cell membranes. In surface pressure isotherms, EE2 was found to expand the monolayers at low surface pressures of the positively charged dimethyldioctadecylammonium bromide (DODAB), zwitterionic 1,2-dipalmitoyl-sn-glycerol-3-phosphocholine (DPPC), negatively charged 1,2-dipalmitoyl-sn-glycero-3-phosphoglycerol (DPPG), and partially anionized stearic acid (StAc). The largest effects were observed for the charged DODAB and DPPG. At the pressure (30mN.m-1) corresponding to the molecular packing of a cell membrane, EE2 caused the compressibility modulus to decrease, again with the largest changes occurring for DODAB and DPPG. The effects from EE2 on the packing of the lipid molecules at this high pressure depended essentially on the size of the headgroups, with EE2 contributing to the area per lipid for StAc and DODAB, whose headgroups are small. EE2 interacted with the headgroups of all lipids and StAc, also affecting the ordering of the tails for DODAB, DPPG and DPPC, according to in situ polarization-modulated infrared reflection absorption spectroscopy (PM-IRRAS). Based on the analysis with the two characterization methods, we propose a model for the EE2 positioning and molecular groups involved in the interaction, which should be relevant to unveil the endocrine disrupting action of EE2.

Influence of the Supramolecular Arrangement in the Electrical Conductivity of Poly(thiophene) Thin Films.

Thin films of regioregular polythiophene derivatives have had their optical, structural and morphological properties characterized, but there is still a lack of comparative studies to determine the effect from deposition techniques, especially on the electrical properties. In this study, we produced Langmuir-Schaefer and spin-coated films of regioregular alkyl-substituted polythiophene derivatives (P3AT) to investigate how distinct supramolecular arrangements can affect their properties. The Langmuir-Schaefer films deposited on indium-tin oxide substrates were observed to grow linearly with the number of layers, according to UV-visible absorption spectroscopy. Atomic force microscopy and Brewster angle microscopy were carried out for morphological characterization. From electrical transport measurements, the DC electrical conductivity of Langmuir-Schaefer films of P3AT was higher than the corresponding spin-coated films, which can be related to the dissimilar roughness and molecular-level organization provided by the Langmuir-Schaefer technique.

Layer-by-Layer Thin Film of Iron Phthalocyanine as a Simple and Fast Sensor for Polyphenol Determination in Tea Samples.

Polyphenols have attracted attention due to their antioxidant capacity and beneficial effects to health. Therefore, fast, inexpensive, and efficient methods to discriminate and to quantify polyphenols are of interest for food industry. In this paper, Layer-by-Layer films of poly(allylamine hydrochloride) and iron tetrasulfonated phthalocyanine were employed as sensor for determination of polyphenols in green tea (camellia sinensis), and green and roasted mate teas (ilex paraguariensis). The polyphenol sensor was tested in catechol standard solution by differential pulse voltammetry (DPV), reaching a limit of detection of 1.76 × 10-7 mol/L. The determination of polyphenols in the tea samples was obtained by analytical curve and catechol standard addition using electrochemical techniques. Projection techniques (information visualization) were applied to the DPV results of the tea samples and a pattern of separation following the phenolic content was obtained. The results support the application of the sensor in fast classification of beverages according to their polyphenol content.

On the distinct molecular architectures of dipping- and spray-LbL films containing lipid vesicles.

The introduction of spraying procedures to fabricate layer-by-layer (LbL) films has brought new possibilities for the control of molecular architectures and for making the LbL technique compliant with industrial processes. In this study we show that significantly distinct architectures are produced for dipping and spray-LbL films of the same components, which included DODAB/DPPG vesicles. The films differed notably in their thickness and stratified nature. The electrical response of the two types of films to aqueous solutions containing erythrosin was also different. With multidimensional projections we showed that the impedance for the DODAB/DPPG spray-LbL film is more sensitive to changes in concentration, being therefore more promising as sensing units. Furthermore, with surface-enhanced Raman scattering (SERS) we could ascribe the high sensitivity of the LbL films to adsorption of erythrosin.

Vibrational spectroscopy for probing molecular-level interactions in organic films mimicking biointerfaces.

Investigation into nanostructured organic films has served many purposes, including the design of functionalized surfaces that may be applied in biomedical devices and tissue engineering and for studying physiological processes depending on the interaction with cell membranes. Of particular relevance are Langmuir monolayers, Langmuir-Blodgett (LB) and layer-by-layer (LbL) films used to simulate biological interfaces. In this review, we shall focus on the use of vibrational spectroscopy methods to probe molecular-level interactions at biomimetic interfaces, with special emphasis on three surface-specific techniques, namely sum frequency generation (SFG), polarization-modulated infrared reflection absorption spectroscopy (PM-IRRAS) and surface-enhanced Raman scattering (SERS). The two types of systems selected for exemplifying the potential of the methods are the cell membrane models and the functionalized surfaces with biomolecules. Examples will be given on how SFG and PM-IRRAS can be combined to determine the effects from biomolecules on cell membrane models, which include determination of the orientation and preservation of secondary structure. Crucial information for the action of biomolecules on model membranes has also been obtained with PM-IRRAS, as is the case of chitosan removing proteins from the membrane. SERS will be shown as promising for enabling detection limits down to the single-molecule level. The strengths and limitations of these methods will also be discussed, in addition to the prospects for the near future.

Spatial distribution of the assemblage of Chironomidae larvae (Diptera) in five floodplain lakes from Ilha Grande National Park (Paraná - Mato Grosso do Sul State, Brazil) / Distribuição espacial da assembleia de larvas de Chironomidae (Diptera) de cinco lagoas de inundação do Parque Nacional de Ilha Grande (Estado do Paraná - Mato Grosso do Sul, Brasil)

Chironomidae larvae (Diptera) are one of the most important families among aquatic insects due to the higher abundance and species richness, considered an important tool for ecological studies. This study evaluated the richness of Chironomidae assemblage and related the distribution with physical and chemical variables in five lakes of the Paraná river, in the Ilha Grande National Park. There were two samplings, one in the central region and another in the marginal area of the floodplain lakes. In each region were collected six samples, five for biological analysis and one for granulometric analysis. The granulometric composition and organic matter content were the principal variables influencing the density and richness of Chironomidae. The scores of the abiotic data distinguished the marginal lakes (São João, Jacaré and Xambrê) from the island lakes (Saraiva and Jatobá). The same segregation was observed in the distribution of Chironomidae morphotypes, and environments with higher values of organic matter, presented the lowest density and taxa richness. Thus, in this study the environmental variables directly interfered in the distribution, abundance and richness of Chironomidae of the floodplain lakes from Ilha Grande National Park, contributing to the knowledge of the diversity of this group in this area.

As larvas de Chironomidae (Diptera) constituem uma das principais famílias entre os insetos aquáticos por sua alta abundância e riqueza taxonômica, consideradas importantes ferramentas nos estudos ecológicos. Este estudo teve por objetivo avaliar a riqueza da assembleia de Chironomidae e relacionar a distribuição desta com variáveis físicas e químicas de cinco lagoas do rio Paraná, no Parque Nacional de Ilha Grande. Foram realizadas duas coletas: uma na região central e outra na região marginal das lagoas. Em cada região foram coletadas seis amostras, cinco para análises biológicas e uma para análise granulométrica. A composição granulométrica e o teor de matéria orgânica foram as principais variáveis que influenciaram a densidade e a riqueza de Chironomidae. Os escores dos dados abióticos separaram as lagoas marginais (São João, Jacaré e Xambrê) das lagoas localizadas na Ilha Grande (Saraiva e Jatobá). A mesma separação foi observada na distribuição dos morfotipos de Chironomidae, cujos ambientes com maiores valores de matéria orgânica apresentaram as menores densidade e riqueza de táxons. Portanto, neste trabalho, as variáveis ambientais interferiram diretamente na distribuição, abundância e riqueza de Chironomidae das lagoas de inundação do Parque Nacional de Ilha Grande, contribuindo para o conhecimento da diversidade deste grupo na área.

Molecularly designed layer-by-layer (LbL) films to detect catechol using information visualization methods.

The control of molecular architectures has been exploited in layer-by-layer (LbL) films deposited on Au interdigitated electrodes, thus forming an electronic tongue (e-tongue) system that reached an unprecedented high sensitivity (down to 10(-12) M) in detecting catechol. Such high sensitivity was made possible upon using units containing the enzyme tyrosinase, which interacted specifically with catechol, and by processing impedance spectroscopy data with information visualization methods. These latter methods, including the parallel coordinates technique, were also useful for identifying the major contributors to the high distinguishing ability toward catechol. Among several film architectures tested, the most efficient had a tyrosinase layer deposited atop LbL films of alternating layers of dioctadecyldimethylammonium bromide (DODAB) and 1,2-dipalmitoyl-sn-3-glycero-fosfo-rac-(1-glycerol) (DPPG), viz., (DODAB/DPPG)5/DODAB/Tyr. The latter represents a more suitable medium for immobilizing tyrosinase when compared to conventional polyelectrolytes. Furthermore, the distinction was more effective at low frequencies where double-layer effects on the film/liquid sample dominate the electrical response. Because the optimization of film architectures based on information visualization is completely generic, the approach presented here may be extended to designing architectures for other types of applications in addition to sensing and biosensing.

Detection of catechol using mixed Langmuir-Blodgett films of a phospholipid and phthalocyanines as voltammetric sensors.

The combination of metallic phthalocyanines (MPcs) and biomolecules has been explored in the literature either as mimetic systems to investigate molecular interactions or as supporting layers to immobilize biomolecules. Here, Langmuir-Blodgett (LB) films containing the phospholipid dimyristoyl phosphatidic acid (DMPA) mixed either with iron phthalocyanine (FePc) or with lutetium bisphthalocyanine (LuPc(2)) were applied as ITO modified-electrodes in the detection of catechol using cyclic voltammetry. The mixed Langmuir films of FePc + DMPA and LuPc(2) + DMPA displayed surface-pressure isotherms with no evidence of molecular-level interactions. The Fourier Transform Infrared (FTIR) spectra of the multilayer LB films confirmed the lack of interaction between the components. The DMPA and the FePc molecules were found to be oriented perpendicularly to the substrate, while LuPc(2) molecules were randomly organized. The phospholipid matrix induced a remarkable electrocatalytic effect on the phthalocyanines; as a result the mixed LB films deposited on ITO could be used to detect catechol with detection limits of 4.30 × 10(-7) and 3.34 × 10(-7) M for FePc + DMPA and LuPc(2) + DMPA, respectively. Results from kinetics experiments revealed that ion diffusion dominated the response of the modified electrodes. The sensitivity was comparable to that of other non-enzymatic sensors, which is sufficient to detect catechol in the food industry. The higher stability of the electrochemical response of the LB films and the ability to control the molecular architecture are promising for further studies with incorporation of biomolecules.