Synthesis of novel chitosan-Schiff bases nanoparticles for high efficiency Helicobacter pylori inhibition.

Two chitosan Schiff bases were synthesized by condensation of chitosan with 2-(4-formylphenoxy)-N-phenylacetamide and N-(4-bromophenyl)-2-(4-formylphenoxy) acetamide denoted as Cs-SBA and Cs-SBBr, respectively. The molecular structures of the resulting chitosan derivatives were characterized using FTIR and 1HNMR and their thermal properties were investigated by TGA. These derivatives were treated with sodium tripolyphosphate (TPP) to produce Cs Schiff base nanoparticles. The nanoparticles physicochemical properties were determined by FTIR, XRD, TEM, and zeta potential analysis. The antimicrobial action against Helicobacter pylori (H. pylori) was evaluated and the results indicated that the anti-H. pylori activity had minimal inhibitory concentration MIC values of 15.62 ± 0.05 and 3.9 ± 0.03 µg/mL for Cs-SBA and Cs-SBBr nanoparticles (Cs-SBA NPs and Cs-SBBr NPs), respectively. The better biologically active nanoparticles, Cs-SBBr NPs, were tested for their cyclooxygenases (COX-1 and COX-2) inhibitory potential. Cs-SBBr NPs demonstrated COX enzyme inhibition activity against COX-2 (IC50 4.5 ± 0.165 µg/mL) higher than the conventional Indomethacin (IC50 0.08 ± 0.003 µg/mL), and Celecoxib (IC50 0.79 ± 0.029 µg/mL). Additionally, the cytotoxicity test of Cs-SBBr NPs showed cytotoxic effect on Vero cells (CCL-81) with IC50 = 17.95 ± 0.12 µg/mL which is regarded as a safe compound. Therefore, Cs-SBBr NPs may become an alternative to cure H. pylori and prevent gastric cancer.

Chitosan nanoparticles of new chromone-based sulfonamide derivatives as effective anti-microbial matrix for wound healing acceleration.

A new series of chromone and furochromone-based sulfonamide Schiff's base derivatives 3-12 were synthesized and evaluated for their antimicrobial activity against S. aureus, E. coli, C. albicans, and A. niger using agar diffusion method. Compound 3a demonstrated potent antimicrobial activities with MIC values of 9.76 and 19.53 µg/mL against S. aureus, E. coli and C. albicans, which is 2-fold and 4-fold more potent than neomycin (MIC = 19.53, 39.06 µg/mL respectively). To improve the effectiveness of 3a, it was encapsulated into chitosan nanoparticles (CS-3aNPs). The CS-3aNPs size was 32.01 nm, as observed by transmission electron microscope (TEM) images and the zeta potential value was 14.1 ± 3.07 mV. Encapsulation efficiency (EE) and loading capacity (LC) were 91.5 % and 1.6 %, respectively as indicated by spectral analysis. The CS-3aNPs extremely inhibited bacterial growth utilizing the colony-forming units (CFU). The ability of CS-3aNPs to protect skin wounds was evaluated in vivo. CS-3aNPs showed complete wound re-epithelialization, hyperplasia of the epidermis, well-organized granulation tissue formation, and reduced signs of wound infection, as seen through histological assessment which showed minimal inflammatory cells in comparison with untreated wound. Overall, these findings suggest that CS-3aNPs has a positive impact on protecting skin wounds from infection due to their antimicrobial activity.

Synthesis and biological evaluation against H. pylori of chitosan menthone Schiff base hybrid with different types of inorganic nanoparticles.

The production of novel natural medicines for the treatment of Helicobacter pylori (H. pylori) has lately attracted a lot of interest. Some bacterial infections have traditionally been alleviated by terpenes. The present work intended to examine the impact of several chitosan menthone Schiff base nanocomposites on the treatment of H. pylori infection as well as on its anti-inflammatory capacity. Chitosan (Cs) was condensed with menthone with different molar ratios of Cs:menthone (1:0.5, 1:1, and 1:2) to produce chitosan Schiff bases namely; Cs-SB1, Cs-SB2, and Cs-SB3, respectively. Cs-SB3 Schiff base nanocomposites were prepared individually by adding 2%Ag, 2%Se, (1%Ag + 1%Se), and 2%Fe2O3 nanoparticles to produce compounds denoted as Cs-SB-Ag, Cs-SB-Se, Cs-SB-Ag/ Se, and Cs-SB-Fe, respectively. The anti-H. pylori activity of Cs-SB-Se was detected at a minimal inhibitory concentration MIC of 1.9 µg/mL making it the most biologically active compound in our study. Cs-SB-Se nanocomposite was tested for its cyclooxygenases (COX-1 and COX-2) inhibitory potential which demonstrated inhibitory efficacy towards COX enzymes with inhibition value against COX-1 (IC50 = 49.86 ± 1.784 µg/mL) and COX-2 (IC50 = 12.64 ± 0.463 µg/mL) which were less than the well-known Celecoxib (22.65 ± 0.081 and 0.789 ± 0.029 µg/mL) and Indomethacin (0.035 ± 0.001 and 0.08 ± 0.003 µg/mL) inhibitors. The selectivity index SI = 3.94 for tested nanocomposites indicated higher selectivity for COX-1. The cytotoxicity of the Cs-SB-Se nanocomposite was evaluated in Vero cells (CCL-81) and it showed that at a concentration of 62.5 µg/mL, cell viability was 85.43 %.

Chitosan Schiff base electrospun fabrication and molecular docking assessment for nonleaching antibacterial nanocomposite production.

In this work, new chitosan derivative nanofibers that exhibit antibacterial properties were successfully fabricated. The two CS Schiff base derivatives (CS-APC and CS-2APC) were prepared by incorporating 4-amino antipyrine moiety in two different ratios, followed by a reductive amination to obtain the corresponding derivatives CS-APCR and CS-2APCR. Spectral analyses were used to confirm the chemical structure. The molecular docking evaluation of CS-APC, CS-APCR, and CS was conducted on DNA topoisomerase IV, thymidylate kinase and SARS-CoV-2 main protease (3CLpro) active sites. CS-APCR showed a well-fitting into the three enzyme active sites with docking score values of - 32.76, - 35.43 and - 30.12 kcal/mol, respectively. The nanocomposites of CS derivatives were obtained by electrospinning the blends of CS-2APC and CS-2APCR with polyvinyl pyrrolidone (PVP) at 20 kV. The morphology of the nanofibers was investigated by scanning electron microscopy (SEM). It was found that fiber diameters were significantly decreased when CS-2APC and CS-2APCR were incorporated into pure PVP to reach 206-296 nm and 146-170 nm, respectively, compared to 224-332 nm for pure PVP. The derivatives of CS and their nanofibers with PVP were found to have antibacterial activities against two strains of Staphylococcus aureus and Escherichia coli. Data revealed that CS-2APC nanofibers showed antibacterial activity to the two strains of E. coli less than CS-2APCR nanofibers.

Self-stick membrane based on grafted gum Arabic as active food packaging for cheese using cinnamon extract.

Encapsulation of volatile essential oils has been investigated to provide an active food packaging (AFP) material with more control over their fast release and pungent smell. In this work, Gum Arabic-based adhesive membrane was developed as a self-stick AFP material, delivering cinnamon essential oil (CEO) in vapor phase. Gum Arabic (GA) was grafted with butyl acrylate (BA) and hydroxyethyl methacrylate [GA-g-poly(BA-HEMA)]. Adhesive membrane was characterized by means of spectral, physicochemical and rheological analysis. GA-adhesive membrane made of 5% wt/v GA, 3.5 m mol HEMA, and 87 m mol BA with 21 N/m tack are loaded with 4, 8 and 10% v/v of CEO and used for antimicrobial bioassays. GA-g-poly(BA-HEMA) membrane prolonged CEO release up to 2 days. 8%v/v CEO showed superior activities against both Gram negative and positive bacteria. Shelf-life of cheese samples, packed with the self-stick membranes loaded with cinnamon extract, has extended from 3 to 8 weeks. Cheese samples that inoculated with shiga toxin producing E. coli O157:H7 and packed in plastic boxes with the self-stick AFP (4, 8 and 10 % CEO), showed significant reduction in the total bacteria counts.

Hydrogel bioink based on clickable cellulose derivatives: Synthesis, characterization and in vitro assessment.

Hydrogel is considered as a promising candidate for bioink in terms of biocompatibility, biodegradability, printability and supporting cellular behavior. Recently, carbohydrates derivatives containing alkyne and azide pendant functional groups have been used in medical applications due to their improved chemical, biological, functional properties, and their amenability for chemical reactions under mild conditions. In this work, a novel bioink was developed based on azide and alkyne of cellulose derivatives. Azido-hydroxyethyl cellulose (D.Sazido = 0.04) was synthesized via open-ring reaction of 1-azido-2,3-epoxypropane and characterized spectroscopically and titrimetrically. Alkyne derivative, propargyl carboxymethyl cellulose (D.Spropargyl = 1.72) was synthesized through coupling reaction with propargylamine in the presence of EDC and NHS. The click-gel scaffold was obtained by mixing the two novel candidates in the presence of copper (I) catalyst. Extrusion bio-plotting experiment was successfully conducted of the two solutions into coagulant Cu (I)/DMSO solutions and demonstrated the possibility of using the clickable cellulose derivatives as bioink precursors. Chemical and physical properties of the click-gel were demonstrated. The biocompatibility assay of the prepared click-gels showed high level of viability in the human skin fibroblast cells (HFB4) at concentration 100 µg/mL.

Cellulose-based click-scaffolds: Synthesis, characterization and biofabrications.

Carbohydrates derivatives containing propargyl pending functional groups have been used in medical applications due to their improved chemical, biological, and functional properties. In this work, azide and alkyne pendant functional groups were introduced onto ethyl cellulose (EC) and ß-cyclodextrin respectively in order to demonstrate the ability of scaffold formation by click chemistry. Technically, Azido-ethyl cellulose (D.S.Azido 0.19) and 2, 3, 6-O- propargylated ß -cyclodextrin were synthesized and characterized as click-triggered candidates. The click-gel scaffold was obtained by mixing the two novel candidates in the presence of copper catalyst. Azido-EC was considered to produce clickable electrospun fibers blended with EC (290-620 nm) at 20 kV in order to functionalized EC substrate bearing azide groups to be amenable towards immobilization of an alkyne-terminated bio-molecules. The biocompatibility assay of the prepared click-triggered candidates showed very high level of viability in the human skin fibroblast cells (HFB4) at concentration 100 µg/ml.