RESUMEN
This study assessed the occurrence, origins, and potential risks of emerging perfluoroalkyl acids (PFAAs) for the first time in drinking water resources of Khyber Pakhtunkhwa, Pakistan. In total, 13 perfluoroalkyl carboxylic acids (PFCAs) with carbon (C) chains C4-C18 and 4 perfluoroalkyl sulfonates (PFSAs) with C chains C4-C10 were tested in both surface and ground drinking water samples using a high-performance liquid chromatography system (HPLC) equipped with an Agilent 6460 Triple Quadrupole liquid chromatography-mass spectrometry (LC-MS) system. The concentrations of ∑PFCAs, ∑PFSAs, and ∑PFAAs in drinking water ranged from 1.46 to 72.85, 0.30-8.03, and 1.76-80.88 ng/L, respectively. Perfluorobutanoic acid (PFBA), perfluorohexanoic acid (PFHxA), and perfluoropentanoic acid (PFPeA) were the dominant analytes in surface water followed by ground water, while the concentration of perfluorobutane sulfonate (PFBS), perfluorooctanoic acid (PFOA), perfluoroheptanoic acid (PFHpA), perfluorooctane sulfonate (PFOS), perfluorohexane sulfonate (PFHxS), perfluorononanoic acid (PFNA), perfluorodecanoic acid (PFDA), perfluoroundecanoic acid (PFUnDA), and perfluorododecanoic acid (PFDoDA) were greater than long-chain PFOA and PFOS. The correlation statistics, which showed a strong correlation (p < 0.05) between the PFAA analytes, potentially indicated the fate of PFAAs in the area's drinking water sources, whereas the hierarchical cluster analysis (HCA) and principal component analysis (PCA) statistics identified industrial, domestic, agricultural, and commercial applications as potential point and non-point sources of PFAA contamination in the area. From risk perspectives, the overall PFAA toxicity in water resources was within the ecological health risk thresholds, where for the human population the hazard quotient (HQ) values of individual PFAAs were < 1, indicating no risk from the drinking water sources; however, the hazard index (HI) from the ∑PFAAs should not be underestimated, as it may significantly result in potential chronic toxicity to exposed adults, followed by children.
Asunto(s)
Agua Potable , Monitoreo del Ambiente , Fluorocarburos , Contaminantes Químicos del Agua , Fluorocarburos/análisis , Agua Potable/química , Contaminantes Químicos del Agua/análisis , Medición de Riesgo , Pakistán , Ácidos Alcanesulfónicos/análisis , Humanos , Exposición a Riesgos Ambientales/estadística & datos numéricos , Análisis MultivarianteRESUMEN
Heart failure is a complex cardiovascular condition characterized by the heart's inability to pump blood effectively, leading to a cascade of physiological changes. Predicting survival in heart failure patients is crucial for optimizing patient care and resource allocation. This research aims to develop a robust survival prediction model for heart failure patients using advanced machine learning techniques. We analyzed data from 299 hospitalized heart failure patients, addressing the issue of imbalanced data with the Synthetic Minority Oversampling (SMOTE) method. Additionally, we proposed a novel transfer learning-based feature engineering approach that generates a new probabilistic feature set from patient data using ensemble trees. Nine fine-tuned machine learning models are built and compared to evaluate performance in patient survival prediction. Our novel transfer learning mechanism applied to the random forest model outperformed other models and state-of-the-art studies, achieving a remarkable accuracy of 0.975. All models underwent evaluation using 10-fold cross-validation and tuning through hyperparameter optimization. The findings of this study have the potential to advance the field of cardiovascular medicine by providing more accurate and personalized prognostic assessments for individuals with heart failure.
RESUMEN
Hexavalent chromium (Cr(VI)) contamination in groundwater poses a substantial global challenge due to its high toxicity and extensive industrial applications. While the bioelectroremediation of Cr(VI) has attracted huge attention for its eco-friendly attributes, its practical application remains constrained by the hydrogeochemical conditions of groundwater (mainly pH), low electron transfer efficiency, limitations in electrocatalyst synthesis and electrode fabrication. In this study, we developed and investigated the use of N, S co-doped carbon nanofibers (CNFs) integrated on a graphite felt (GF) as a self-standing cathode (NS/CNF-GF) for the comprehensive reduction of Cr(VI) from real contaminated groundwater. The binder free cathode, prepared through electro-polymerization, was employed in a dual-chamber microbial fuel cell (MFC) for the treatment of Cr (VI)-laden real groundwater (40 mg/L) with a pH of 7.4. The electrochemical characterization of the prepared cathode revealed a distinct electroactive surface area, more wettability, facilitating enhanced adsorption and rapid electron transfer, resulting in a commendable Cr(VI) reduction rate of 0.83 mg/L/h. The MFC equipped with NS/CNF-GF demonstrated the lowest charge transfer resistance (Rct) and generated the highest power density (155 ± 0.3 mW/m2) compared to control systems. The favorable electrokinetics for modified cathode led to swift substrate consumption in the anode, releasing more electrons and protons, thereby accelerating Cr(VI) reduction to achieve the highest cathodic coulombic efficiency (C.Eca)of80 ± 1.3 %. A similar temporal trend observed between Cr(VI) removal efficiency, COD removal efficiency, and C.Eca, underscores the effective performance of the modified electrode. The reusability of the binder free cathode, exemption from catholyte preparation and the absence of pH regulation requirements highlighted the potential scalability and applicability of our findings on a larger scale.
Asunto(s)
Cromo , Electrodos , Agua Subterránea , Contaminantes Químicos del Agua , Agua Subterránea/química , Contaminantes Químicos del Agua/química , Cromo/química , Biodegradación Ambiental , Metales Pesados/química , Fuentes de Energía Bioeléctrica , Concentración de Iones de HidrógenoRESUMEN
In recent years, there has been a significant rise in the utilization of amino-functionalized polystyrene nanoplastics (PS-NH2). This surge in usage can be attributed to their exceptional characteristics, including a substantial specific surface area, high energy, and strong reactivity. These properties make them highly suitable for a wide range of industrial and medical applications. Nevertheless, there is a growing apprehension regarding their potential toxicity to aquatic organisms, particularly when considering the potential impact of heavy metals like lead (Pb) on the toxicity of PS-NH2. Herein, we examined the toxic effects of sole PS-NH2 (90 nm) at five concentrations (e.g., 0, 0.125, 0.25, 0.5, and 1 mg/L), as well as the simultaneous exposure of PS-NH2 and Pb2+ (using two environmental concentrations, e.g., 20 µg/L for Pb low (PbL) and 80 µg/L for Pb higher (PbH)) to the microalga Chlorella vulgaris. After a 96-h exposure, significant differences in chlorophyll a content and algal growth (biomass) were observed between the control group and other treatments (ANOVA, p < 0.05). The algae exposed to PS-NH2, PS-NH2 + PbL, and PS-NH2 + PbH treatment groups exhibited dose-dependent toxicity responses to chlorophyll a content and biomass. According to the Abbott toxicity model, the combined toxicity of treatment groups of PS-NH2 and PbL,H showed synergistic effects. The largest morphological changes such as C. vulgaris' size reduction and cellular aggregation were evident in the medium treated with elevated concentrations of both PS-NH2 and Pb2+. The toxicity of the treatment groups followed the sequence PS-NH2 < PS-NH2 + PbL < PS-NH2 + PbH. These results contribute novel insights into co-exposure toxicity to PS-NH2 and Pb2+ in algae communities.
Asunto(s)
Antioxidantes , Chlorella vulgaris , Plomo , Peroxidación de Lípido , Poliestirenos , Chlorella vulgaris/efectos de los fármacos , Plomo/toxicidad , Poliestirenos/toxicidad , Peroxidación de Lípido/efectos de los fármacos , Contaminantes Químicos del Agua/toxicidadRESUMEN
In recent years, filamentous algae blooms and microplastics (MPs) pollution have become two major ecological and environmental problems in urban water systems. In order to solve these two problems at the same time, this study explored the loading capacity of MPs on fresh filamentous algae, and successfully synthesized magnetic filamentous algae biochar loading with Fe3O4 by hydrothermal method, with the purpose of removing MPs from water. The magnetic filamentous algal biochar was characterized by scanning electron microscopy (SEM), Fourier transform infrared (FTIR), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and so on. Experiments on adsorption kinetics, adsorption isotherms and optimum pH were carried out to explore the adsorption mechanism of MPs on magnetic filamentous algal biochar. The adsorption kinetics and adsorption isotherm models were evaluated, and the selection criterion for the appropriate model was determined by using the residual sum of squares (RSS) and Bayesian information criterion (BIC). Microscope images revealed that fresh filamentous algae could interact with MPs in the form of entanglement, adhesion and encapsulation. The average load of MPs in filamentous algae samples was 14.1 ± 5 items/g dry weight. The theoretical maximum adsorption capacities of polystyrene MPs (PS-MPs) by raw biochar (A500) and magnetic biochar with Fe3O4 (M2A500) were 176.99 mg/g and 215.58 mg/g, respectively. The adsorbent materials gave better reusability because they could be reused up to five times. Overall, these findings have provided new insights into the use of filamentous algae for in situ remediation of fluvial MPs pollution, as well as feasible strategies for the recycling of algal waste.
Asunto(s)
Carbón Orgánico , Microplásticos , Contaminantes Químicos del Agua , Carbón Orgánico/química , Adsorción , Contaminantes Químicos del Agua/química , Contaminantes Químicos del Agua/análisis , CinéticaRESUMEN
Thorium-232 (232Th) is a radioactive heavy metal that is of increasing interest as a source of nuclear energy. However, upon nuclear incidents, the ingestion or inhalation of Th in major quantities can contribute to chemical and radiological health problems, including accumulation in the bone tissue and an increased risk of developing pancreatic, lung, and hematopoietic cancers. The major mineral component of the bone is hydroxyapatite (HAP)âalso the major mineral component of the teeth. As such, the teeth are the first site of exposure upon oral ingestion of Th-contaminated materials, and Th can pose a potential risk to teeth development. In essence, in the case of human contamination, it is critical to identify effective chelating agents capable of removing Th. Using a batch study methodology, this present work investigates the uptake and the removal of Th from synthetic HAP and from teeth samples by diethylenetriamine pentaacetate (DTPA), ethylenediaminetetraacetic acid (EDTA), and other promising chelating agents. Th uptake over synthetic HAP exceeds 98% at physiological pH with <1 min of contact time and uptake exceeds 90% across the entire pH range. Regarding teeth, over 1 mg Th uptaken per gram of tooth is observed after 24 h. The overall effectiveness of chelating agents for the removal of Th from is as follows: DTPA > EDTA > NaF/mouthwash/3,4,3-LI(1,2-HOPO); this trend was observed both in synthetic HAP and Th-impregnated teeth samples.
Asunto(s)
Quelantes , Torio , Humanos , Ácido Edético , Durapatita , Ácido PentéticoRESUMEN
The conductive microbial nanowires of Geobacter sulfurreducens serve as a model for long-range extracellular electron transfer (EET), which is considered a revolutionary "green" nanomaterial in the fields of bioelectronics, renewable energy, and bioremediation. However, there is no efficient pathway to induce microorganisms to express a large amount of microbial nanowires. Here, several strategies have been used to successfully induce the expression of microbial nanowires. Microbial nanowire expression was closely related to the concentration of electron acceptors. The microbial nanowire was around 17.02 µm in length, more than 3 times compared to its own length. The graphite electrode was used as an alternative electron acceptor by G. sulfurreducens, which obtained a fast start-up time of 44 h in microbial fuel cells (MFCs). Meanwhile, Fe(III) citrate-coated sugarcane carbon and biochar were prepared to test the applicability of these strategies in the actual microbial community. The unsatisfied EET efficiency between c-type cytochrome and extracellular insoluble electron receptors promoted the expression of microbial nanowires. Hence, microbial nanowires were proposed to be an effective survival strategy for G. sulfurreducens to cope with various environmental stresses. Based on this top-down strategy of artificially constructed microbial environmental stress, this study is of great significance for exploring more efficient methods to induce microbial nanowires expression.
Asunto(s)
Fuentes de Energía Bioeléctrica , Nanocables , Compuestos Férricos/metabolismo , Transporte de Electrón , Conductividad EléctricaRESUMEN
Sediment hypoxia is a growing problem and has negative ecological impacts on the aquatic ecosystem. Hypoxia can disturb the biodiversity and biogeochemical cycles of both phosphorus (P) and nitrogen (N) in water columns and sediments. Anthropogenic eutrophication and internal nutrient release from lakebed sediment accelerate hypoxia to form a dead zone. Thus, sediment hypoxia mitigation is necessary for ecological restoration and sustainable development. Conventional aeration practices to control sediment hypoxia, are not effective due to high cost, sediment disturbance and less sustainability. Owing to high solubility and stability, micro-nanobubbles (MNBs) offer several advantages over conventional water and wastewater treatment practices. Clay loaded oxygen micro-nanobubbles (OMNBs) can be delivered into deep water sediment by gravity and settling. Nanobubble technology provides a promising route for cost-effective oxygen delivery in large natural water systems. OMNBs also have the immense potential to manipulate biochemical pathways and microbial processes for remediating sediment pollution in natural waters. This review article aims to analyze recent trends employing OMNBs loaded materials to mitigate sediment hypoxia and subsequent pollution. The first part of the review highlights various minerals/materials used for the delivery of OMNBs into benthic sediments of freshwater bodies. Release of OMNBs at hypoxic sediment water interphase (SWI) can provide significant dissolved oxygen (DO) to remediate hypoxia induced sediment pollution Second part of the manuscript unveils the impacts of OMNBs on sediment pollutants (e.g., methylmercury, arsenic, and greenhouse gases) remediation and microbial processes for improved biogeochemical cycles. The review article will facilitate environmental engineers and ecologists to control sediment pollution along with ecological restoration.
Asunto(s)
Oxígeno , Contaminantes Químicos del Agua , Humanos , Ecosistema , Contaminantes Químicos del Agua/análisis , Agua Dulce , Hipoxia , Agua , Eutrofización , Sedimentos Geológicos , Fósforo , Nitrógeno/análisisRESUMEN
Soil pollution with heavy metals (HMs) has become a world environmental problem. This study focuses on surface soil contamination with Cr, Mn, Co, Ni, Cu, Zn, Cd, Hg, Pb, Fe, and Al, their sources, and potential hazards along the basin of River Swat, Pakistan. The average concentrations (mg/kg) of HMs were the most abundant for Al (24,730.19) followed by Fe (22,419.41) > Mn (386.78) > Zn (57.75) > Cr (38.07) > Ni (32.46) > Cu (23.43) > Pb (19.59) > Co (10.77) > Cd (3.18) > Hg (0.12). The concentrations of Cr and Mn in 5.45% each, Co in 10.90%, Zn in 27.27%, Cu in 36.36%, Ni in 41.81%, and Hg in 92.72% of the total soil samples exceeded their respective background values. The geostatistical approaches determined the distribution patterns of HM pollution along the basin, whereas the statistics of principal component analysis exposed the likely sources of HM contamination in the area. Pollution indices evaluated the overall HM distribution and pollution status in the area. Contamination factor showed a high degree of HM contamination in 82% of the total sampling sites, while the geo-accumulation index designated low to moderate contamination with Cr, Mn, Co, Ni, Cu, Zn, Hg, and Pb, and moderate to extreme contamination with Cd, Fe, and Al. The trend of ecological toxicity showed potential ups and downs along with the sites from low to considerable hazard (< 95 < PEHI < 190), whereas the human carcinogenic hazard was within the USEPA acceptable limits (1 × 10-7-1 × 10-4), but the non-carcinogenic hazard was higher than the threshold (HI > 1) for children because they are more exposed than adults.
Asunto(s)
Mercurio , Metales Pesados , Contaminantes del Suelo , Adulto , Cadmio/análisis , Niño , China , Monitoreo del Ambiente , Contaminación Ambiental/análisis , Humanos , Plomo/análisis , Mercurio/análisis , Metales Pesados/análisis , Medición de Riesgo , Suelo , Contaminantes del Suelo/análisisRESUMEN
Saccharomyces cerevisiae var. boulardii is best known for its treatment efficacy against different gastrointestinal diseases. This probiotic yeast can significantly protect the normal microbiota of the human gut and inhibit the pathogenicity of different diarrheal infections. Several clinical investigations have declared S. cerevisiae var. boulardii a biotherapeutic agent due to its antibacterial, antiviral, anti-carcinogenic, antioxidant, anti-inflammatory and immune-modulatory properties. Oral or intramuscular administration of S. cerevisiae var. boulardii can remarkably induce health-promoting effects in the host body. Different intrinsic and extrinsic factors are responsible for its efficacy against acute and chronic gut-associated diseases. This review will discuss the clinical and beneficial effects of S. cerevisiae var. boulardii in the treatment and prevention of different metabolic diseases and highlight some of its health-promising properties. This review article will provide fundamental insights for new avenues in the fields of biotherapeutics, antimicrobial resistance and one health.
RESUMEN
Context: Postpartum depression (PPD) is onset of depressive symptoms in postpartum period from 2 weeks to 1 year. It causes maternal morbidity and long-term negative effects on growth and development of infant and child. It is often unreported and underdiagnosed. Aims: (1) To estimate the prevalence of PPD, (2) To determine socio-demographic, clinical, and obstetric correlates of the same. Settings and Design: A cross-sectional study was done in urban and rural areas of District Aligarh. Methods: A total of 304 females between 6 weeks and 6 months' postpartum period giving consent were included in this study. Sociodemographic, obstetric, and clinico-social factors were recorded using predesigned, pretested questionnaire. Edinburgh Postnatal Depression Scale (EPDS) score ≥10 was used to screen for PPD and International Classification of Disease (ICD-10) criteria for confirmation. Statistical Analysis Used: Correlates of PPD were determined using logistic regression analysis. Results: The prevalence of PPD was 9.5% using EPDS and was confirmed by ICD-10 criteria. History of abortion (adjusted odds ratio [AOR]: 6.0, 95% Confidence Interval [CI] 2.2-16.5), poor relationship with in-laws (AOR: 5.1; 95% CI 1.3-20.5), marital conflict (AOR: 13.3; 95% CI 2.2-77.6), and substance abuse in husband (AOR: 3.1; 95% CI 1.1-9.0) were found to be significant correlates for PPD. Conclusions: About one in every 10 postpartum females suffered from depression but did not seek health care for the same. Women facing social pathologies such as substance abuse in husband, marital conflict, and poor relationship with in-laws are more at risk of PPD. Screening for PPD should be included in the maternal and child health care programs to ensure early diagnosis and treatment.
Asunto(s)
Depresión Posparto , Embarazo , Niño , Femenino , Humanos , Depresión Posparto/epidemiología , Depresión Posparto/diagnóstico , Depresión Posparto/terapia , Estudios Transversales , Factores de Riesgo , India/epidemiología , Periodo Posparto , PrevalenciaRESUMEN
The current coronavirus disease 2019 (COVID-19) outbreak is considered as one of the biggest public health challenges and medical emergencies of the century. A global health emergency demands an urgent development of rapid diagnostic tools and advanced therapeutics for the mitigation of COVID-19. To cope with the current crisis, nanotechnology offers a number of approaches based on abundance and versatile functioning. Despite major developments in early diagnostics and control of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), there is still a need to find effective nanomaterials with low cost, high stability and easy use. Nanozymes are nanomaterials with innate enzyme-like characteristics and exhibit great potential for various biomedical applications such as disease diagnosis and anti-viral agents. Overall the potential and contribution of nanozymes in the fight against SARS-CoV-2 infection i.e., rapid detection, inhibition of the virus at various stages, and effective vaccine development strategies, is not fully explored. This paper discusses the utility and potential of nanozymes from the perspective of COVID-19. Moreover, future research directions and potential applications of nanozymes are highlighted to overcome the challenges related to early diagnosis and therapeutics development for the SARS-CoV-2. We anticipate the current perspective will play an effective role in the existing response to the COVID-19 crisis.
RESUMEN
Uranium-238 (238U), a long-lived radiometal, is widespread in the environment because of both naturally occurring processes and anthropogenic processes. The ingestion or inhalation of large amounts of U is a major threat to humans, and its toxicity is considered mostly chemical rather than radiological. Therefore, a way to remove uranium ingested by humans from uranium-contaminated water or from the air is critically needed. This study investigated the uranium uptake by hydroxyapatite (HAP), a compound found in human bone and teeth. The uptake of U by teeth is a result of U transport as dissolved uranyl (UO22+) in contaminated water, and U adsorption has been linked to delays in both tooth eruption and development. In this present work, the influence of pH, contact time, initial U concentration, and buffer solution on the uptake and removal of U in synthetic HAP was investigated and modeled. The influence of pH (pH of human saliva, 6.7-7.4) on the uptake of uranyl was negligible. Furthermore, the kinetics were extremely fast; in one second of exposure, 98% of uranyl was uptaken by HAP. The uptake followed pseudo-second-order kinetics and a Freundlich isotherm model. A 0.2 M sodium carbonate solution removed all the uranyl from HAP after 1 h. Another series of in vitro tests were performed with real teeth as targets. We found that, for a 50 mg/L U in PBS solution adjusted to physiological pH, â¼35% of the uranyl was uptaken by the tooth after 1 h, following pseudo-first-order kinetics. Among several washing solutions tested, a commercially available carbonate, as well as a commercially available fluoride solution, enabled removal of all the uranyl taken up by the teeth.
Asunto(s)
Diente/metabolismo , Uranio/metabolismo , Durapatita/química , Durapatita/metabolismo , Humanos , Concentración de Iones de Hidrógeno , Diente/química , Uranio/química , Uranio/aislamiento & purificaciónRESUMEN
Effective utilization of harmful algal biomass from eutrophic lakes is required for sustainable waste management and circular bioeconomy. In this study, Microcystis aeruginosa derived biomass served as an electron donor in the microbial fuel cell (MFC) for waste treatment and electricity generation. Bioelectrochemical performance of MFC fed with microalgae (MFC-Algae) was compared with MFC fed with a commercial substrate (MFC-Acetate). Complete removal of microcystin-LR (MC-LR) and high chemical oxygen demand (COD) removal efficiency (67.5 ± 1%) in MFC-Algae showed that harmful algal biomass could be converted into bioelectricity. Polarization curves revealed that MFC-Algae delivered the maximum power density (83 mW/m2) and current density (672 mA/m2), which was 43% and 45% higher than that of MFC-Acetate respectively. Improved electrochemical performance and substantial coulombic efficiency (7.6%) also verified the potential use of harmful algal biomass as an alternate MFC substrate. Diverse microbial community profiles showed the substrate-dependent electrogenic activities in each MFC. Biodegradation pathway of MC-LR by anodic microbes was also explored in detail. Briefly, a sustainable approach for on-site waste management of harmful algal biomass was presented, which was deprived of transportation and special pretreatments. It is anticipated that current findings will help to pave the way for practical applications of MFC technology.
Asunto(s)
Fuentes de Energía Bioeléctrica , Administración de Residuos , Análisis de la Demanda Biológica de Oxígeno , Biomasa , Electricidad , Electrodos , Aguas ResidualesRESUMEN
Waterways have histories of being contaminated by heavy and/or radioactive metals produced by industrial processes. Natural radioisotopes of uranium (238U, 235U and 234U), long-lived radiometals, are widespread in the environment as a result of both naturally occurring processes and anthropogenic processes. Uranium is considered a major threat to humans. Previous research has focused on using inorganic materials (e.g. ion-exchangers, extractants, nanoporous sorbents) to remove such metal. However, there has been a rise in using biodegradable, recyclable, and organic biological wastes to remove heavy toxic metals from aqueous solutions. The purpose of this study is to identify pistachio shells as good candidates for the removal of uranyl from aqueous solutions. The influences of pH, contact time, temperature, and initial uranyl concentration on uranyl uptake were investigated. The influence of pH was observed to be variable, with relatively high uptake occurring at pH 4 and at slightly alkaline pH values. Uptake increased as a function of contact time, temperature, and initial uranyl concentration. The mechanism followed pseudo-second-order and intraparticle kinetics models, and the shell was demonstrated to be a Freundlich isotherm. The shells were successfully demonstrated to be viable adsorbents for uranium in seawater samples, with obtained trends similar to those achieved in the batch studies.
Asunto(s)
Pistacia , Monitoreo de Radiación , Adsorción , Concentración de Iones de Hidrógeno , Cinética , Agua de Mar , UranioRESUMEN
Anaerobic reductive treatment technologies offer cost-effective and large-scale treatment of chlorinated compounds, including polychlorinated dibenzo-p-dioxins and furans (PCDD/Fs). The information about the degradation rates of these compounds in natural settings is critical but difficult to obtain because of slow degradation processes. Establishing a relationship between biotransformation rate and abundance of biomarkers is one of the most critical challenges faced by the bioremediation industry. When solved for a given contaminant, it may result in significant cost savings because of serving as a basis for action. In the current review, we have summarized the studies highlighting the use of biomarkers, particularly DNA and RNA, as a proxy for reductive dechlorination of chlorinated ethenes. As the use of biomarkers for predicting biotransformation rates has not yet been executed for PCDD/Fs, we propose the extension of the same knowledge for dioxins, where slow degradation rates further necessitate the need for developing the biomarker-rate relationship. For this, we have first retrieved and calculated the bioremediation rates of different PCDD/Fs and then highlighted the key sequences that can be used as potential biomarkers. We have also discussed the implications and hurdles in developing such a relationship. Improvements in current techniques and collaboration with some other fields, such as biokinetic modeling, can improve the predictive capability of the biomarkers so that they can be used for effectively predicting biotransformation rates of dioxins and related compounds. In the future, a valid and established relationship between biomarkers and biotransformation rates of dioxin may result in significant cost savings, whilst also serving as a basis for action.
Asunto(s)
Dioxinas , Furanos , Bifenilos Policlorados , Dibenzodioxinas Policloradas , Biomarcadores , Biotransformación , Dibenzofuranos , Dibenzofuranos PolicloradosRESUMEN
In the present work, nitrogen-doped and nitrogen-boron-double-doped manganese oxide (Mn2O3) and tungsten oxide (WO3) nanoparticles were synthesized using precipitation-hydrothermal method for methylene blue degradation under visible light. Materials were characterized using X-ray diffraction (XRD) analysis, Scanning electron microscopy, Energy dispersive X-ray spectroscopy and UV-vis spectroscopy. Results showed that N and B were successfully incorporated into the crystal lattices of Mn2O3 and WO3. XRD showed that WO3 was crystallized in the form of a monoclinic lattice, while cubic Mn2O3 was produced in the cubic form. The crystallite size was found to be decreased due to the substitution of N and B elements which reveals their roles to accelerate the crystal nucleation rate resulting in the decreased size. On the other hand, single and double doping has successfully narrowed the band gaps of the as-synthesised metal oxide photocatalysts resulting in better absorption in the visible light. Band gaps obtained were as follows: 3.02, 2.50, 1.73 and 1.77â eV for N-WO3 N/B-WO3, N-Mn2O3 and N/B-Mn2O3 respectively. Photocatalytic experiments showed that all as-synthesised materials exhibited a photocatalytic efficiency under visible light ≥420â nm. The degradation efficiency of methylene blue (MB) was in the following order: N-B-co-doped metal oxides > N-doped metal oxides > metal oxides. The presence of scavenger molecules such as isopropanol, EDTA-2Na and benzoquinone inhibited MB degradation. Finally, the results showed that these materials can be reused several times without a notable decrease in efficiency.
Asunto(s)
Luz , Nanopartículas , Catálisis , Azul de Metileno , NitrógenoRESUMEN
Background: Community-based active case finding (ACF) for tuberculosis (TB) implemented among marginalised and vulnerable populations in 285 districts of India resulted in reduction of diagnosis delay and prevalence of catastrophic costs due to TB diagnosis. We were interested to know whether this translated into improved treatment outcomes. Globally, there is limited published literature from marginalised and vulnerable populations on the independent effect of community-based ACF on treatment outcomes when compared to passive case finding (PCF). Objectives: To determine the relative differences in unfavourable treatment outcomes (death, loss-to-follow-up, failure, not evaluated) of ACF and PCF-diagnosed people. Methods: Cohort study involving record reviews and interviews in 18 randomly selected districts. We enrolled all ACF-diagnosed people with new smear-positive pulmonary TB, registered under the national TB programme between March 2016 and February 2017, and an equal number of randomly selected PCF-diagnosed people in the same settings. We used log binomial models to adjust for confounders. Results: Of 572 enrolled, 275 belonged to the ACF and 297 to the PCF group. The proportion of unfavourable outcomes were 10.2% (95% CI: 7.1%, 14.3%) in the ACF and 12.5% (95% CI: 9.2%, 16.7%) in the PCF group (p = 0.468). The association between ACF and unfavourable outcomes remained non-significant after adjusting for confounders available from records [aRR: 0.83 (95% CI: 0.56, 1.21)]. Due to patient non-availability at their residence, interviews were conducted for 465 (81.3%). In the 465 cohort too, there was no association after adjusting for confounders from records and interviews [aRR: 1.05 (95% CI: 0.62, 1.77)]. Conclusion: We did not find significant differences in the treatment outcomes. Due to the wide CIs, studies with larger sample sizes are urgently required. Studies are required to understand how to translate the benefits of ACF to improved treatment outcomes.
Asunto(s)
Tuberculosis Pulmonar/tratamiento farmacológico , Tuberculosis Pulmonar/epidemiología , Poblaciones Vulnerables , Adolescente , Adulto , Anciano , Estudios de Cohortes , Femenino , Humanos , India/epidemiología , Entrevistas como Asunto , Masculino , Tamizaje Masivo/métodos , Persona de Mediana Edad , Prevalencia , Investigación Cualitativa , Resultado del Tratamiento , Tuberculosis Pulmonar/diagnóstico , Adulto JovenRESUMEN
The bifunctional ligand p-SCN-Bn-HOPO, which has four 1,2-hydroxypyridinone groups on a spermine backbone with an isothiocyanate linker, has been shown to be an efficient and stable chelator for Zr(iv) and, more importantly, the radioisotope 89Zr for use in radiolabeling antibodies for positron emission tomography (PET) imaging. Previous studies of 89Zr-HOPO-trastuzumab in mice showed low background, good tumor to organ contrast, and very low bone uptake which show p-SCN-Bn-HOPO to be an important next-generation bifunctional chelator for radioimmunoPET imaging with 89Zr. However, the reported synthesis of p-SCN-Bn-HOPO involves nine steps and multiple HPLC purifications with an overall yield of about 1.4%. Herein we report an improved and efficient synthesis of p-SCN-Bn-HOPO in four steps with 14.3% overall yield which will improve its availability for further biological studies and wider application in PET imaging. The new synthetic route also allows variation in linker length and chemistries which may be helpful in modifying in vivo clearance behaviors of future agents.
Asunto(s)
Quelantes/síntesis química , Piridonas/química , Espermina/química , Quelantes/química , Estructura Molecular , Tomografía de Emisión de PositronesRESUMEN
Background: In 2007, a field observation from India reported 11% misclassification among 'new' patients registered under the revised national tuberculosis (TB) control programme. Ten years down the line, it is important to know what proportion of newly registered patients has a past history of TB treatment for at least one month (henceforth called 'misclassification'). Methods: A study was conducted among new smear-positive pulmonary TB patients registered between March 2016 and February 2017 in 18 randomly selected districts to determine the effectiveness of an active case-finding strategy in marginalised and vulnerable populations. We included all patients detected through active case-finding. An equal number of randomly selected patients registered through passive case-finding from marginalised and vulnerable populations in the same districts were included. Before enrolment, we enquired about any history of previous TB treatment through interviews. Results: Of 629 patients, we interviewed 521, of whom, 11% (n=56) had past history of TB treatment (public or private) for at least a month: 13% (34/268) among the active case-finding group and 9% (22/253) among the passive case-finding group (p=0.18). No factors were found to be significantly associated with misclassification. Conclusion: Around one in every ten patients registered as 'new' had previous history of TB treatment. Corrective measures need to be implemented, followed by monitoring of any change in the proportion of 'previously treated' patients among all registered patients treated under the programme at national level.