Urinary Tract Infections among Febrile Infants in Qatar: Extended-Spectrum-Beta-Lactamase (ESBL)-Producing Versus Non-ESBL Organisms.

BACKGROUND: The escalating prevalence of ESBL-producing Enterobacteriaceae in Qatar's pediatric population, especially in community-onset febrile urinary tract infections (FUTIs), necessitates a comprehensive investigation into this concerning trend. RESULTS: Over the course of one year, a total of 459 infants were diagnosed and subsequently treated for UTIs. Cases primarily occurred in infants aged over 60 days, predominantly non-Qatari females born from term pregnancies. Notably, E. coli and K. pneumoniae were the most frequently identified organisms, accounting for 79.7% and 9.8% in the ESBL group and 57.2% and 18.7% in the non-ESBL group, respectively. Interestingly, hydronephrosis emerged as the most prevalent urological anomaly detected in both ESBL (n = 10) and other organism (n = 19) groups. METHODS: In this retrospective cohort study conducted in Qatar, we meticulously evaluated the prevalence of pediatric FUTIs. Our study focused on febrile infants aged less than 1 year, excluding those with urine samples not obtained through a catheter. CONCLUSIONS: E. coli and K. pneumoniae prevailed as the predominant causative agents in febrile children in Qatar, with hydronephrosis being identified as the most common urological anomaly. Moreover, our findings suggested that gentamicin served as a viable non-carbapenem option for hospitalized ESBL cases, while oral nitrofurantoin showed considerable promise for uncomplicated ESBL UTIs.

Investigation of antiproliferative efficacy and apoptosis induction in leukemia cancer cells using irinotecan-loaded liposome-embedded nanofibers constructed from chitosan.

Liposomes and nanofibers have been implemented as efficacious vehicles for delivering anticancer drugs. With this view, this study explores the antiproliferative efficacy and apoptosis induction in leukemia cancer cells utilizing irinotecan-loaded liposome-embedded nanofibers fabricated from chitosan, a biological source. Specifically, we investigate the effectiveness of poly(ε-caprolactone) (PCL)/chitosan (CS) (core)/irinotecan (CPT)nanofibers (termed PCL-CS10 CPT), PCL/chitosan/irinotecan (core)/PCL/chitosan (shell) nanofibers (termed CS/CPT/PCL/CS), and irinotecan-coloaded liposome-incorporated PCL/chitosan-chitosan nanofibers (termed CPT@Lipo/CS/PCL/CS) in releasing irinotecan in a controlled manner and treating leukemia cancer. The fabricated formulations were characterized utilizing Fourier transform infrared analysis, transmission electron microscopy, scanning electron microscopy, dynamic light scattering, zeta potential, and polydispersity index. Irinotecan was released in a controlled manner from nanofibers filled with liposomes over 30 days. The cell viability of the fabricated nanofibrous materials toward Human umbilical vein endothelial cells (HUVECs) non-cancerous cells after 168 h was >98 % ± 1 %. The CPT@Lipo/CS/PCL/CS nanofibers achieved maximal cytotoxicity of 85 % ± 2.5 % against K562 leukemia cancer cells. The CPT@Lipo/CS/PCL/CS NFs exhibit a three-stage drug release pattern and demonstrate significant in vitro cytotoxicity. These findings indicate the potential of these liposome-incorporated core-shell nanofibers for future cancer therapy.

Microsnare retrieval as a bail-out technique of Detached Woven EndoBridge device: Illustrative series.

BACKGROUND: The Woven EndoBridge (WEB) device (MicroVention, Tustin, CA, USA) has an excellent safety profile. While major complications such as device malposition and migration are rare, they can have serious consequences if not addressed promptly. Our case series describes the safety and efficacy of Amplatz goose neck microsnare device (Medtronic in Irvine, CA, USA) in endovascular retrieval of a detached WEB device. METHODS: We retrospectively reviewed six consecutive patients who underwent endovascular WEB retrieval using Amplatz microsnare device between March 2012 and December 2022. RESULTS: All six WEB devices were successfully retrieved either directly from the aneurysm sac due to device malpositioning or from a distal branch following device migration. None of the patients experienced intra-operative aneurysm perforation, arterial dissection, or vasospasm attributable to the process of WEB extraction. Five out of six patients (83.3%) had a good functional outcome (mRS 0-1) upon discharge from the hospital and at 24 months. CONCLUSION: Our experience suggests that detached WEB devices can be safely retrieved using an Amplatz microsnare. Apart from addressing device migration, direct removal of an undersized or malpositioned WEB from the aneurysm sac appears to be a safe option that can be considered when all other rescue techniques have been exhausted.

Lateral Compression Manipulation: A Simple Approach for Sizing Taller-Than-Wide Intracranial Aneurysms with the Woven EndoBridge Device.

BACKGROUND AND PURPOSE: The Woven EndoBridge (WEB) system has established itself as a safe and effective option for managing wide-neck bifurcation aneurysms. Addressing aneurysms with a greater height than width using conventional WEB-sizing methods has proved ineffective due to the inherent configuration of the devices. To overcome this limitation, we propose an intuitive approach that involves swapping the width and height dimensions of the aneurysm to determine the appropriate WEB size. MATERIALS AND METHODS: A retrospective analysis was conducted on patients undergoing WEB embolization at a single neuroscience center from March 2013 to February 2023. RESULTS: Twenty-five eligible aneurysms were identified, with the height dimension exceeding the width by an average of 2.33 mm (ranging from 1.4 to 4.5 mm). Of these, 20 cases adhered to the recommended sizing technique, resulting in a 100% success rate of adequate occlusion (14/20 complete occlusion, 6/20 proximal recess filling). In contrast, the outcomes for the remaining 5 cases that did not follow the proposed sizing method were less favorable (P < .05). Among these, 4 cases treated with undersized WEBs showed neck remnants during follow-up, and 1 patient who received an oversized WEB required device replacement during the same procedure. CONCLUSIONS: The simple sizing method we proposed for treating taller-than-wide aneurysms has demonstrated promising results, allowing the WEB system to address twice the original size range of treatable aneurysms. Further research with a larger sample size is recommended.

Immunomodulatory effect of Myrtenol on benzo (a) pyrene-induced lung cancer in Swiss albino mice via modulation of tumor markers, cytokines and inhibition of PCNA expression.

Lung cancer is one of the most common cancers in men. Although many diagnostic and treatment regimens have been followed in the treatment for lung cancer, increasing mortality rate due to lung cancer is depressing and hence requires alternative plant based therapeutics with with less side-effects. Myrtenol exhibits anti-inflammatory and antioxidant properties. Hence we intended to study the effect of Myrtenol on B(a)P-induced lung cancer. Our study showed that B(a)P lowered hematological count, decreased phagocyte and avidity indices, nitroblue tetrazolium (NBT) reduction, levels of immunoglubulins, antioxidant levels, whereas Myrtenol treatment restored them back to normal levels. On the other hand, xenobiotic and liver dysfunction marker enzymes and pro-inflammatory cytokines were elevated on B(a)P exposure, which retuned back to normal by Myrtenol. This study thus describes the immunomodulatory and antioxidant effects of Myrtenol on B[a]P-induced immune destruction.

Testosterone with Silymarin Improves Diabetes-obesity Comorbidity Complications by Modulating Inflammatory Responses and CYP7A1/ACC Gene Expressions in Rats.

BACKGROUND: The co-morbidity of DMOB has become increasingly problematic among the world's population because of a high-calorie diet and sedentary lifestyle. DMOB is associated with lower testosterone (TN) levels, the male sex hormone. The phytochemical compound silymarin (SN) exerts antidiabetic activity by modifying ß-cells and anti-obesity activity by inhibiting adipogenesis by methylxanthine. AIM: The goal of this study was to find out how well testosterone (TN) with silymarin (SN) protects against oxidative stress and inflammation in the liver of the experimental rats with type 2 diabetes (T2D) and obesity (DMOB). OBJECTIVES: The present study evaluates the efficacy of TN and SN combination (TNSN) on the levels of the potential parameters, such as body mass, serum marker enzymes, fasting glucose levels, HbA1c levels, lipid profile, enzymatic and non-enzymatic antioxidants, proinflammatory cytokines, gene expression pathways, and histopathology in a DMOB comorbidity rat model. METHODS: Male Sprague-Dawley (SD) rats were fed a high-fat diet (HFD) for 20 weeks with an administration of a single dose of streptozotocin (STZ) i.p. injection (30 mg/kg) on the 9th week of the study. The procedure was to develop the DMOB co-morbidity model in the experimental animals. Co-treatment of TN and SN administration were followed throughout the experiment. Rats were sacrificed after overnight fasting to collect serum and liver tissue samples. Samples were analyzed using a clinical chemistry automated analyzer, spectrophotometry, and quantitative real-time PCR (qPCR) methods and protocols. RESULTS: Analyses of body mass changes, serum marker enzymes, fasting glucose levels, HbA1c levels, lipid profiles, enzymatic and non-enzymatic antioxidants, TNF-α, IL-6, adiponectin, CYP7A1, ACC expression pathways, and histopathology showed significant abnormal levels (P ≤ 0.05) in the pathological group. These were efficiently treated to normal by the administration of TNSN. CONCLUSION: These results concluded that TNSN exerted protective efficacy against the liver abnormalities in the co-morbidity of the DMOB rat model.

Precise Construction of Dual-Promising Anticancer Drugs Associated with Gold Nanomaterials on Glioma Cancer Cells.

Multiple chemodrugs with nanotechnology have proven to be an effective cancer treatment technique. When taken combined, cabazitaxel (CTX) and cisplatin (PT) have more excellent cytotoxic effects than drugs used alone in the chemotherapy of several different cancers. However, several severe side effects are associated with using these chemotherapy drugs in cancer patients. Gold nanomaterials (AuNMs) are promising as drug carriers because of their small diameter, easy surface modifications, good biocompatibility, and strong cell penetration. This work aimed to determine the CTX and PT encapsulated with AuNMs against human glioma U87 cancer cells. The fabrication of the AuNMs achieved a negative surface charge, polydispersity index, and the mean sizes. The combined cytotoxic effect of CTX and PT bound to AuNMs was greater than that of either drug alone when tested on U87 cells. The half inhibitory concentration (IC50) values for free PT were 54.7 µg/mL (at 24 h) and 4.8 g µg/mL (at 72 h). Results acquired from the MTT assay show cell growth decreases time- and concentration-dependent AuNMs, free CTX, free PT, and AuNMs@CTX/PT-induced cytotoxicity and, ultimately, the cell death of U87 cells via apoptosis. The biochemical apoptosis staining techniques investigated the cells' morphological changes of the cells (acridine orange and ethidium bromide (AO-EB) and nuclear staining (DAPI) techniques). The AO-EB and nuclear staining results reveal that the NPs effectively killed cancer cells. Furthermore, the flow cytometry analysis examined the mode of cell death. Therefore, AuNMs@CTX/PT has excellent potential in the cancer therapy of different cancer cells.

Diterpene Coronarin Attenuates Lipopolysaccharide-Induced Acute Lung Injury in Both In Vivo and In Vitro Models.

Acute lung injury (ALI) is a clinical condition occurs due to severe systemic inflammatory response for clinical stimulus like pneumonia, sepsis, trauma, aspiration, inhalation of toxic gases, and pancreatitis. Disruption of alveolar barriers, activation of macrophages, infiltration of neutrophils, and proinflammatory cytokines are the vital events occurs during ALI. The drugs which inhibit these inflammatory response can protect lungs from inflammatory insults. In this study, we examined the potency of phytochemical coronarin, a diterpene which have been proven to possess anti-inflammatory, antioxidant, antiangiogenic, and antitumor activities. Healthy BALB/c mice were induced to acute lung injury with intra-tracheal administration of LPS and then treated with 5 and 10 mg/kg concentration of coronarin. The wet/dry lung weight of mice were estimated to assess the induction of pulmonary edema. BALF fluid was analyzed for protein concentrations and immune cells count. Myeloperoxidase activity and levels of chemokines MCP-2 and MIP-2, iNOS, COX-2, and PGE-2 were quantified to assess the immunomodulatory effect of coronarin against LPS-induced ALI. The levels of proinflammatory cytokines was measured to examine the anti-inflammatory property of coronarin, and it was confirmed with histopathological analysis of the lung tissue. Murine RAW 264.7 cells were utilized for the in vitro analysis. Cell cytoxicity and cytoprotective property of coronarin was assessed with MTT assay in LPS-treated Murine RAW 264.7. The anti-inflammatory property of coronarin was further confirmed in in vitro condition by estimating the levels of pro-inflammatory cytokines in coronarin-treated and untreated LPS-induced cells. Overall, our in vivo and in vitro results confirm coronarin significantly inhibited the infiltration of neutrophils prevented immunodulatory activity and synthesis of proinflammatory cytokines and alleviated the acute lung injury induced by LPS. Coronarin is a potent anti-inflammatory drug which can be subjected to further research to be prescribed as drug for ALI.

Prevalence and determinants of school bullying in Qatar: a cross-sectional study.

BACKGROUND: School bullying is a wide-spread phenomenon that manifests in various forms. It has both short-term and long-term devastating consequences on physical, mental and social wellbeing. The Middle East and North Africa (MENA) region, including Qatar, has a relatively high prevalence of school bullying. This research aims at identifying the prevalence of bullying, particularly unsafe environments were bullying takes place, and its attributes at schools in Qatar. METHODS: In a cross-sectional study, 980 students from 10 schools in Qatar completed an anonymous self-completion standardized questionnaire to assess the different aspects of bullying from school students' point of view. RESULTS: The prevalence of bullying victimization and perpetration was found to be 41.0% and 31.7% among school students in Qatar, respectively. Classroom (67.5%) and hallways (64.8%) were the most frequently indicated environments of bullying whereas library was the least indicated one (28.3%). Verbal bullying was the most used type of bullying by students. Overall, students in Qatar believe that bullying is considerably a significant issue at their schools, yet schools are safe place for them to be in. Gender, age, ethnicity, school grade and years living in Qatar showed significant differences among the students. CONCLUSION: School bullying is a serious, yet a manageable global problem. Our findings re-demonstrated the alarming high prevalence of school bullying in Qatar, highlighted student related and school related factors which have implications for future multidimensional action and research and recommended measures to foster safety at school.

Graphene loaded TiO2 submicron spheres scattering layer for efficient dye-sensitized solar cell.

Dye-Sensitized Solar Cells (DSSCs) have attracted great attention due to environmentally friendly low-cost processing, excellent working ability in diffuse light, and potential to meet the power demands of future buildings due the true class of building integrated photovoltaics (BIPV). Nevertheless, DSSCs have relatively low photoconversion efficiency (PCE) due to multiple issues. Several strategies have been employed to enhance its PCE. For instance, bi-layered structure of photoelectrode i.e., mesoporous TiO2 transparent layer with top scattering layer was introduced which scatter light inside on large angles improves the harvesting ability of photoelectrode thus enhanced PCE. However, scattering layer is composed of aggregated small particles which offer sluggish electron transport due to multiple grain boundaries, consequently, unwanted recombination reaction which leads to poor PCE. This issue has been addressed for transparent layer immensely but ignored for scattering layer. Mostly for scattering layer in previous studies novel structures have been proposed to enhance scattering properties and dye adsorption only. Therefore, in this study for the first time presenting dual functional graphene/TiO2 scattering layer in which solvent exfoliated graphene is incorporated in TiO2 submicron spheres which enhanced electron transport properties, while submicron spheres scatter light effectively. Scattering and electron transport characteristics of DSSCs are thoroughly investigated with the function of graphene loading. Electrochemical impedance spectroscopy (EIS) has revealed that diffusion coefficient length and coefficient and conductivity attained maximum value at 0.01 wt%. while other important parameters such as electron lifetime and electron density in conduction band have been improved till 0.020 wt% graphene loading. However, results indicated that with 0.01 w% graphene 33% higher PCE was achieved than without scattering layer and 13% higher than scattering layer without graphene. The depraving in PCE at >0.01 wt% graphene despite of excellent electron transport improvement is attributed to the loss of diffuse reflectance and higher optical absorption by graphene.

Advancing thermal performance through vortex generators morphing.

The design of rigid vortex generators (RVG) influences the thermal performance of various technologies. We employed Discrete Adjoint-Based Optimization to show the optimal development of vortex generators. Under turbulent flow conditions, different bi-objective functions on the RVG design were examined. Specifically, we aimed at an optimal RVG shape that minimizes the pressure drop and maximizes the local heat transfer in a rectangular channel. We show that an optimal design of an RVG can be obtained using computational fluid dynamics in conjunction with the Pareto Front at a computational cost of the order ~[Formula: see text]. We obtained three essential vortex generator shapes based on the RVG morphing technique. Compared to the baseline geometry of a delta winglet pair DWP, the first morphed design reduced the pressure drop by [Formula: see text], however, at the expense of a [Formula: see text] reduction in the Nusselt number. The second vortex generator design enhanced the heat transfer by [Formula: see text], however, at the cost of a significant increase in pressure drop of about [Formula: see text]. The final morphed design achieved the highest thermal performance factor of 1.28, representing a heat transfer enhancement of [Formula: see text] with a moderate increase in pressure drop of about [Formula: see text] compared to DWP vortex generators. Furthermore, we investigated the effect of introducing different size holes on the mass reduction of vortex generators and their thermal performances. The mass of vortex generators can be reduced by [Formula: see text] and with an increase of [Formula: see text] in thermal performance factor concerning the DWP baseline. The findings of this study will lead to highly efficient lightweight heat exchangers.

Risk assessment of pollen allergy in urban environments.

According to WHO, by 2050, at least one person out of two will suffer from an allergy disorder resulting from the accelerating air pollution associated with toxic gas emissions and climate change. Airborne pollen, and associated allergies, are major public health topics during the pollination season, and their effects are further strengthened due to climate change. Therefore, assessing the airborne pollen allergy risk is essential for improving public health. This study presents a new computational fluid dynamics methodology for risk assessment of local airborne pollen transport in an urban environment. Specifically, we investigate the local airborne pollen transport from trees on a university campus in the north of France. We produce risk assessment maps for pollen allergy for five consecutive days during the pollination season. The proposed methodology could be extended to larger built-up areas for different weather conditions. The risk assessment maps may also be integrated with smart devices, thus leading to decision-aid tools to better guide and protect the public against airborne pollen allergy.

Mechanistic modelling of targeted pulmonary delivery of dactinomycin iron oxide-loaded nanoparticles for lung cancer therapy.

With the increase in respiratory conditions including lung cancer post covid-19 pandemic, drug-loaded nanoparticulate dry powder inhalers (DPIs) can facilitate targeted lung delivery as a patient-friendly, non-invasive method. The aim of this work was to synthesise and optimise iron oxide nanoparticles (IONPs) containing dactinomycin as a model drug, using Quality by Design principles. Chitosan and sodium alginate were investigated as polymeric coatings. The mass median aerodynamic diameter (MMAD), fine particle fraction (FPF), burst-effect (BE), entrapment-efficiency and the emitted-dose (ED) were investigated in initial screening studies and outcomes used to set up a Design of Experiments. Results revealed that chitosan IONPs were superior to that of sodium alginate in delivering DPI with optimal properties [ED (89.9%), FPF (59.7%), MMAD (1.59 µm) and BE (12.7%)]. Design space for targeted IONPs included formulations containing 2.1-2.5% dactinomycin and 0.5-0.9% chitosan. Differential scanning calorimetry and X-ray diffraction and SEM-EDS analysis revealed effective formation of IONPs, and TEM images revealed the production of spherical IONPs with particle size of 4.4 ± 0.77 nm. This work overcame the light sensitivity of dactinomycin to potentially target the high molecular weight drugs to the lungs, with controlled delivery based on a reduced burst effect.

Adsorption Characteristics of Hair Dyes Removal from Aqueous Solution onto Oak Cupules Powder Coated with ZnO.

Three hair dyes of Arianor madder red 306003 (R), Arian or Straw Yellow 306005 (Y), and Arianor ebony 306020 (E) were removed from an aqueous solution in a batch mode using a powder of oak cupules coated with ZnO (COZ). The COZ-adsorbent material was characterized in terms of XRD, FT-IR, and SEM analysis. The best conditions for the uptake of hair dyes by COZ were investigated. For Y dye, the best uptake was estimated on 0.06 g of COZ at 7.0 pH for 150 min. The E dye uptake requires 120 min on 0.05 g of COZ at 9.0 pH. For E hair dye, kinetic data revealed a pseudo-first-order model for E hair dye and a pseudo-second-order model for R and Y. Equilibrium data exhibited consistency with the Langmuir isotherm model for the adsorption of E dye onto COZ, and the Freundlich isotherm model for the adsorption of R and Y hair dyes onto COZ. Isotherms models of D-R and Temkin were also examined. The thermodynamic parameters (-ve ∆G and +ve ∆H and ∆S) demonstrated that the removal of hair dyes by COZ is spontaneous, endothermic, and feasible. The adsorption capacity of COZ for R, Y, and E uptake was found to be 55.5, 52.6, and 135.1 mg·g-1, respectively. Furthermore, COZ reusability was demonstrated after five cycles of regeneration, with a negligible decline in adsorption extent (13.08%, 13.85, and 10.20% for R, Y, and E, respectively) in comparison to its initial capacity.

A reservoir bubble point pressure prediction model using the Adaptive Neuro-Fuzzy Inference System (ANFIS) technique with trend analysis.

The bubble point pressure (Pb) could be obtained from pressure-volume-temperature (PVT) measurements; nonetheless, these measurements have drawbacks such as time, cost, and difficulties associated with conducting experiments at high-pressure-high-temperature conditions. Therefore, numerous attempts have been made using several approaches (such as regressions and machine learning) to accurately develop models for predicting the Pb. However, some previous models did not study the trend analysis to prove the correct relationships between inputs and outputs to show the proper physical behavior. Thus, this study aims to build a robust and more accurate model to predict the Pb using the adaptive neuro-fuzzy inference system (ANFIS) and trend analysis approaches for the first time. More than 700 global datasets have been used to develop and validate the model to robustly and accurately predict the Pb. The proposed ANFIS model is compared with 21 existing models using statistical error analysis such as correlation coefficient (R), standard deviation (SD), average absolute percentage relative error (AAPRE), average percentage relative error (APRE), and root mean square error (RMSE). The ANFIS model shows the proper relationships between independent and dependent parameters that indicate the correct physical behavior. The ANFIS model outperformed all 21 models with the highest R of 0.994 and the lowest AAPRE, APRE, SD, and RMSE of 6.38%, -0.99%, 0.074 psi, and 9.73 psi, respectively, as the first rank model. The second rank model has the R, AAPRE, APRE, SD, and RMSE of 0.9724, 9%, -1.58%, 0.095 psi, and 13.04 psi, respectively. It is concluded that the proposed ANFIS model is validated to follow the correct physical behavior with higher accuracy than all studied models.

Preparation, characterization, in vitro drug release and anti-inflammatory of thymoquinone-loaded chitosan nanocomposite.

In this study, we formulated Thymoquinone-loaded nanocomposites (TQ-NCs) using high-pressure homogenizer without sodium tripolyphosphate. The TQ-NCs were characterized and their anti-inflammatory determined by the response of the LPS-stimulated macrophage RAW 264.7 cells in the production of nitric oxide, prostaglandin E2, tumor necrosis factor-α, interleukin-6, and interleukin-1ß. The physicochemical properties of TQ-NC were determined using different machines. TQ was fully incorporated in the highly thermal stable nanoparticles. The nanoparticles showed rapid release of TQ in the acidic medium of the gastric juice. In medium of pH 6.8, TQ-NC exhibited sustained release of TQ over a period of 100 h. The results suggest that TQ-NC nanoparticles have potential application as parenterally administered therapeutic compound. TQ-NC effectively reduce production of inflammatory cytokines by the LPS-stimulated RAW 264.7 cells, indicating that they have anti-inflammatory properties. In conclusion, TQ-NC nanoparticles have the characteristics of efficient carrier for TQ and an effective anti-inflammatory therapeutic compound.

Perfusion Imaging for Endovascular Thrombectomy in Acute Ischemic Stroke Is Associated With Improved Functional Outcomes in the Early and Late Time Windows.

BACKGROUND: The impact on clinical outcomes of patient selection using perfusion imaging for endovascular thrombectomy (EVT) in patients with acute ischemic stroke presenting beyond 6 hours from onset remains undetermined in routine clinical practice. METHODS: Patients from a national stroke registry that underwent EVT selected with or without perfusion imaging (noncontrast computed tomography/computed tomography angiography) in the early (<6 hours) and late (6-24 hours) time windows, between October 2015 and March 2020, were compared. The primary outcome was the ordinal shift in the modified Rankin Scale score at hospital discharge. Other outcomes included functional independence (modified Rankin Scale score ≤2) and in-hospital mortality, symptomatic intracerebral hemorrhage, successful reperfusion (Thrombolysis in Cerebral Infarction score 2b-3), early neurological deterioration, futile recanalization (modified Rankin Scale score 4-6 despite successful reperfusion) and procedural time metrics. Multivariable analyses were performed, adjusted for age, sex, baseline stroke severity, prestroke disability, intravenous thrombolysis, mode of anesthesia (Model 1) and including EVT technique, balloon guide catheter, and center (Model 2). RESULTS: We included 4249 patients, 3203 in the early window (593 with perfusion versus 2610 without perfusion) and 1046 in the late window (378 with perfusion versus 668 without perfusion). Within the late window, patients with perfusion imaging had a shift towards better functional outcome at discharge compared with those without perfusion imaging (adjusted common odds ratio [OR], 1.45 [95% CI, 1.16-1.83]; P=0.001). There was no significant difference in functional independence (29.3% with perfusion versus 24.8% without; P=0.210) or in the safety outcome measures of symptomatic intracerebral hemorrhage (P=0.53) and in-hospital mortality (10.6% with perfusion versus 14.3% without; P=0.053). In the early time window, patients with perfusion imaging had significantly improved odds of functional outcome (adjusted common OR, 1.51 [95% CI, 1.28-1.78]; P=0.0001) and functional independence (41.6% versus 33.6%, adjusted OR, 1.31 [95% CI, 1.08-1.59]; P=0.006). Perfusion imaging was associated with lower odds of futile recanalization in both time windows (late: adjusted OR, 0.70 [95% CI, 0.50-0.97]; P=0.034; early: adjusted OR, 0.80 [95% CI, 0.65-0.99]; P=0.047). CONCLUSIONS: In this real-world study, acquisition of perfusion imaging for EVT was associated with improvement in functional disability in the early and late time windows compared with nonperfusion neuroimaging. These indirect comparisons should be interpreted with caution while awaiting confirmatory data from prospective randomized trials.

An Accurate Reservoir's Bubble Point Pressure Correlation.

Bubble point pressure (P b) is essential for determining petroleum production, simulation, and reservoir characterization calculations. The P b can be measured from the pressure-volume-temperature (PVT) experiments. Nonetheless, the PVT measurements have limitations, such as being costly and time-consuming. Therefore, some studies used alternative methods, namely, empirical correlations and machine learning techniques, to obtain the P b. However, the previously published methods have restrictions like accuracy, and some use specific data to build their models. In addition, most of the previously published models have not shown the proper relationships between the features and targets to indicate the correct physical behavior. Therefore, this study develops an accurate and robust correlation to obtain the P b applying the Group Method of Data Handling (GMDH). The GMDH combines neural networks and statistical methods that generate relationships among the feature and target parameters. A total of 760 global datasets were used to develop the GMDH model. The GMDH model is verified using trend analysis and indicates that the GMDH model follows all input parameters' exact physical behavior. In addition, different statistical analyses were conducted to investigate the GMDH and the published models' robustness. The GMDH model follows the correct trend for four input parameters (gas solubility, gas specific gravity, oil specific gravity, and reservoir temperature). The GMDH correlation has the lowest average percent relative error, root mean square error, and standard deviation of 8.51%, 12.70, and 0.09, respectively, and the highest correlation coefficient of 0.9883 compared to published models. The different statistical analyses indicated that the GMDH is the first rank model to accurately and robustly predict the P b.

Preparation and characterisation of ciprofloxacin-loaded silver nanoparticles for drug delivery.

Silver nanoparticles (AgNPs) have shown potential applications in drug delivery. In this study, the AgNPs was prepared from silver nitrate in the presence of alginate as a capping agent. The ciprofloxacin (Cipro) was loaded on the surface of AgNPs to produce Cipro-AgNPs nanocomposite. The characteristics of the Cipro-AgNPs nanocomposite were studied by X-ray diffraction (XRD), UV-Vis, transmission electron microscopy (TEM), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), Fourier-transform infra-red analysis (FT-IR) and zeta potential analyses. The XRD of AgNPs and Cipro-AgNPs nanocomposite data showed that both have a crystalline structure in nature. The FT-IR data indicate that the AgNPs have been wrapped by the alginate and loaded with the Cipro drug. The TEM image showed that the Cipro-AgNPs nanocomposites have an average size of 96 nm with a spherical shape. The SEM image for AgNPs and Cipro-AgNPs nanocomposites confirmed the needle-lumpy shape. The zeta potential for Cipro-AgNPs nanocomposites exhibited a positive charge with a value of 6.5 mV. The TGA for Cipro-AgNPs nanocomposites showed loss of 79.7% in total mass compared to 57.6% for AgNPs which is due to the Cipro loaded in the AgNPs. The release of Cipro from Cipro-AgNPs nanocomposites showed slow release properties which reached 98% release within 750 min, and followed the Hixson-Crowell kinetic model. In addition, the toxicity of AgNPs and Cipro-AgNPs nanocomposites was evaluated using normal (3T3) cell line. The present work suggests that Cipro-AgNPs are suitable for drug delivery.

Botulinum toxin and occlusal splints for the management of sleep bruxism in individuals with implant overdentures: A randomized controlled trial.

BACKGROUND: The available treatment options fail to provide definitive or curative management for bruxer patients rehabilitated with implant overdentures (OD). The data regarding Botulinum toxin (BTX) injection as a management strategy for bruxism remains unclear. This randomized, single-blinded, control-group, pretest-posttest prospective trial evaluated the occlusal guard and Botox injections (BTX) effectiveness in managing sleep bruxism (SB) in subjects whose one of the edentulous arches had been restored with the implant-supported OD. METHODS: Forty-two patients diagnosed with definite bruxism were selected, all of which had implant-retained ODs opposing natural dentition. The participants were allocated randomly to three equal groups. Participants in group I (control group) were instructed to remove the OD at night; group II was managed with conventional occlusal stents. Those in group III were given BTX injections. New ODs were constructed for all groups, and all ball attachments were replaced with a new nylon cap. A baseline assessment (one month of OD insertion) of patient satisfaction and sleep quality was conducted, and then again at 3, 6, 9, and 12 months of treatment. Subjective sleep quality was evaluated using Pittsburgh Sleep Quality Index (PSQI). Patients' satisfaction was evaluated using Temporomandibular disorders/numeric scales (TMD/NS). Prosthodontic (mechanical) complications were recorded during the follow-up period. RESULTS: Group III showed a statistically significant improvement in patient satisfaction and sleep quality compared to the other two groups at 3, 6, 9, and 12 months follow-up period ( P  = 0 0.001, 0.0001, 0.0013, and 0.0001 respectively). Regarding prosthodontic (mechanical) complications, the highest number of events was revealed in the control group. CONCLUSIONS: BTX and occlusal appliances effectively improve patient satisfaction and sleep quality of Bruxer patients rehabilitated with single arch implant overdentures.