Anatomical Conditions in Simultaneous Orthognathic Surgery and Structural Rhinoplasty. A Clinical Series / Condiciones Anatómicas en Cirugía Ortognática y Rinoplastia Estructural Simultanea. Una Seria Clínica

SUMMARY: Orthognathic surgery and rhinoplasty show synergy in terms of function and aesthetic results. The aim of this research is to analyze variables related to simultaneous orthognathic surgery and rhinoplasty and to discuss the surgical sequence. Male and female subjects between 18 and 45 years old were included in this research. Diagnosis related to nasal morphology (nasal tip bifid, rotate, square and others as well as the alae morphology and columella), facial deformity (sagittal and vertical deformity), type of surgery (rhinoplasty techniques and orthognathic techniques) and complications were included. The minimum follow-up was 12 months; Chi- Square and t test were used to define correlations, considering a value of p<0.05 for statistical significance. Class III facial deformity was observed in 40 % of subjects and class II facial deformity was present in 43 %. For the nasal deformities, the tip and nasal bridge were most prevalent; primary nasal deformity was observed in the 83 % of subjects and was significant more than secondary nasal deformity (p=0.042). Bimaxillary surgery was performed in 31 cases (88 %). In 10 cases a change of the original plan for rhinoplasty due to previous maxillary surgery was realized, mainly in class III facial deformity, with no statistical differences. Revision rhinoplasty was realized in 5 cases (14 %) and was not related to surgical variables; revision for orthognathic surgery was not necessary in this series. Rhinoplasty and orthognathic surgery simultaneously show low complications and predictable results. We can conclude that maxillary mandibular osteotomies and rhinoplasty could be performed safely. However, larger studies are necessary to understand the best choice and variables involved in simultaneous procedures and soft tissue response.

La cirugía ortognática y la rinoplastia muestran sinergia en términos de resultados funcionales y estéticos. EL objetivo de esta investigación es analizar variables relacionadas con la cirugía ortognática y rinoplastia ejecutada de forma simultanea. Fueron incluidos hombres y mujeres entre 18 y 45 años de edad. EL diagnóstico fue en base a la morfología nasal (punta bífida, rotada, cuadrada u otras así como alteraciones del ala nasal y columela), deformidad facial (deformidad sagital y vertical), tipo de cirugía (técnica de rinoplastia y cirugía ortognática) y complicaciones asociadas. El seguimiento mínimo fue de 12 meses; se utilizo las prueba t test y chi cuadrado para definir relaciones estadísticas considerando un valor de p< 0,05 para obtener diferencias significativas. La deformidad clase III fue observada en el 40 % de los sujetos y la deformidad facial de clase II se presento en el 43 %. Para la deformidad nasal, las alteraciones de a punta nasal y nasal fueron mas prevalentes; la deformidad nasal primaria se presentó en el 83 % de los sujetos y fue significativamente mayor que la deformidad nasal secundaria (p=0,042). La cirugía bimaxilar se realizó en 31 casos (88 %); en 10 casos se realizó el cambio del plan quirúrgico inicial de la rinoplastia debido a cambios generados en la cirugía maxilar previa, mayormente en deformidad facial de clase III, sin presentar diferencias significativas. La rinoplastia de revisión fue realizada en 5 casos (14 %) y no fue relacionada con ninguna variable de tipo quirúrgica; la revisión de cirugía ortognática no fue realizada en ningún caso de esta serie. La rinoplastia y la cirugía ortognática simultanea mostraron bajas complicaciones y resultados predecibles. Se puede concluir que la osteotomía maxilo mandibular y la rinoplastia son seguras; sin embargo, estudios de mayor volumen son necesarios para entender la mejor opción y variables relacionadas con procedimientos simultáneos y la respuesta de tejidos blandos faciales.

Early Treatment of Unilateral Condylar Hyperplasia in Adolescents: Preliminary Results.

Facial asymmetry associated with unilateral condylar hyperplasia (UCH) is a rare disease. The aim of this study was to evaluate the clinical conditions of progressive facial asymmetry in young subjects treated with high condylectomy. A retrospective study was performed including nine subjects diagnosed with UCH type 1B and progressive facial asymmetry around 12 years old with an upper canine progressing towards dental occlusion. After an analysis and a decision of treatment, orthodontics began one to two weeks prior to the condylectomy (with a mean vertical reduction of 4.83 ± 0.44 mm). Facial and dental asymmetry, dental occlusion, TMJ status and an open/closing mouth were analyzed before surgery and in the final stage of treatment, almost 3 years after surgery. Statistical analyses were performed using the Shapiro-Wilk test and a Student's t-test considering a p value of <0.05. Comparing T1 (before surgery) and T2 (once orthodontic treatment was finalized), the operated condyle showed a similar height to that observed in stage 1 with a 0.12 mm difference in height (p = 0.8), whereas the non-operated condyle showed greater height increase with an average of 3.88 mm of vertical growth (p = 0.0001). This indicated that the non-operated condyle remained steady and that the operative condyle did not register significant growth. In terms of facial asymmetry in the preoperative stage, a chin deviation of 7.55 mm (±2.57 mm) was observed; in the final stage, there was a significant reduction in the chin deviation with an average of 1.55 mm (±1.26 mm) (p = 0.0001). Given the small number of patients in the sample, we can conclude that high condylectomy (approx. 5 mm), if performed early, especially in the mixed-dentition stage before full canine eruption, is beneficial for the early resolution of asymmetry and thus the avoidance of future orthognathic surgery. However, further follow-up until the end of facial growth is required.

Comparison of rhBMP-2 in Combination with Different Biomaterials for Regeneration in Rat Calvaria Critical-Size Defects.

Regeneration of critical bone defects requires the use of biomaterials. The incorporation of osteoinductive agents, such as bone morphogenetic proteins (BMPs), improves bone formation. This study aimed to compare the efficacy of rhBMP-2 in combination with different materials for bone regeneration in critical-sized rat calvarial defects. This was an experimental animal study using 30 rats. In each rat, two 5-mm critical-size defects were made in the calvaria (60 bone defects in total) using a trephine. All rats were randomized to one of the six groups: control (C), autograft + rhBMP-2 (A), absorbable collagen sponge + rhBMP-2 (ACS), ß-tricalcium phosphate + rhBMP-2 (B-TCP), bovine xenograft + rhBMP-2 (B), and hydroxyapatite + rhBMP-2 (HA). The outcome was assessed after 4 and 8 weeks using histological description and the histological bone healing scale. Statistical analysis was performed using the Kruskal-Wallis and Mann-Whitney U tests, with a p-value set at 0.05. The average bone healing scores per group were as follows: C group, 12.5; A group, 26.5; ACS group, 18.8; B-TCP group, 26.2; HA group, 20.9; and B group, 20.9. The C group showed a significant difference between weeks 4 and 8 (p = 0.032). Among the 4-week groups, the C group showed a significant difference compared to A (p = 0.001), ACS (p = 0.017), and B-TCP (p = 0.005) groups. The 8-week experimental group did not show any significant differences between the groups. The 5-mm critical size defect in rat calvaria requires the use of bone biomaterials to heal at 4 and 8 weeks. rhBMP-2, as applied in this study, showed no difference in new bone formation when combined with bovine, B-TCP, or HA biomaterials.

Cleft Lip and Palate Midfacial Hypoplasia: Criteria to Choose the Treatment.

ABSTRACT: A series of skeletal and dentoalveolar/occlusal criteria were proposed for choosing the treatment modality for the management of midface hypoplasia in cleft lip/palate patients, focusing on functional improvement, aesthetics, and minimizing the risk of recurrence and secondary alterations. For which, 42 patients with nonsyndromic cleft lip/palate, all with previous primary lip/palate surgeries and without previous osteotomies, were analyzed. Orthognathic surgery (OS) (n = 24) and maxillary distraction osteogenesis (n = 18) with anterior segmental osteotomies (segmental distraction osteogenesis [SD]), alveolar transport disc (TD), and midface total distraction osteogenesis (TDO) by modified Le Fort III osteotomy was done.The average of maxillary advancement for OS was 5.58 ±â€Š0.83 mm, for SD 9.4 ±â€Š0.89 mm, for TD 8.00 ±â€Š1.00 mm, and for TDO was 8.13 ±â€Š1.55 mm.In the presence of infraorbital and/or zygomatic hypoplasia, TDO was performed using skeletal anchorage, with the requirement of occlusal stability in dental cast in occlusion. In short maxillary arch without dental cast feasibility in occlusion, hypodontia/agenesis or absence of premaxilla, TD and SD was performed. There was only 1 mm of recurrence in 1 patient of each group. Changes in speech were detected in 2 patients in the OS group (8.3%). Orthognathic surgery can be indicated for advancements ≤7 mm not requiring orbito-zygomatic advancement, whereas distraction osteogenesis can be indicated for advances >8 mm with or without the need for orbito-zygomatic advancement, in addition with other dentoalveolar factors and velopharyngeal function.

Late correction of orbital deformities using customized 3D implant / Corrección tardía de deformidades de órbita usando implantes personalizados 3D

SUMMARY: Late orbital reconstruction is a complex and challenge for surgeons. The aim of this article is to present complex orbital reconstruction using patient specific implant (PSI) strategy and polyetheretherketone (PEEK). A literature review and a cases series of sequelae after complex orbital trauma are presented; cases with great middle third deformities showing defect in the maxilla, nasal area, body of the zygoma and zygomatic arch were included; in both cases the sequelae was for more than 10 years. Virtual planning and PEEK implants were manufacture using a puzzle (two or three parts) by 3D print or injection. Patients were treated and their surgeries carried out without complications, using a minimal surgical approach. No infections were observed, and after 12 months follow-up they were stable showing normal function. PSI based-PEEK for orbital reconstruction are safe, efficient, effective and to obtain orbital morphology with low complications.

RESUMEN: La reconstrucción tardía de la órbita es un desafío complejo para cirujanos. El objetivo de este artículo fue presentar la reconstrucción orbitaria compleja utilizando implante paciente específico (PSI) y polietereterketona (PEEK). Son presentados una revisión de literatura y una serie de casos con secuelas posteriores a un trauma orbitario complejo; además, son presentados casos con gran deformidad del tercio medio del rostro mostrando defectos en maxila, área nasal, cuerpo del hueso cigomático y arco cigomático; ambos casos de secuela fueron por más de 10 años. Planificación virtual e implantes en PEEK fueron creados usando una estrategia de puzzle (dos o tres partes) por inyección o impresión 3D. Los pacientes fueron tratados y sus cirugías realizadas sin complicaciones usando accesos quirúrgicos reducidos. No se observaron infecciones y después de 12 meses de seguimiento permanecieron estables mostrando función normal. Los PSI para reconstrucción orbitaria son seguros, eficientes, efectivos y recuperan morfología de órbita con bajas complicaciones.

Mandibular Angle Contouring Using Porous Polyethylene Stock or PEEK-based Patient Specific Implants. A Critical Analysis.

ABSTRACT: Contour augmentation and mandibular angle modification surgery is becoming increasingly. The aim of this research is to compare technique and outcomes in augmentations done with standard implants or PEEK-based patient specific implants (PSI) in mandibular angle. Data from surgical planning, operative and post-operative of 6 months follow-up were revised for 21 patients who were submitted to facial surgery using a stock implant obtained from companies currently on the market or 3D implants created with CAD/CAM technology using PEEK 3D printing. Surgical time, intra-operative and post-operative complications were compared, analyzing the advantages and disadvantage of each technique. Statistical analyses using t-test and chi-squared were performed considering P value< 0.05 for statistical differences. Twelve patients were operated on with stock implants and nine patients with PSI. The surgical time was 15 minutes less for the 3D implant surgeries (P = 0.021) and intraoperatively only the stock implants needed modifications with wear and adaptation methods; post-operative infections were observed in both groups with no significant differences (P > 0.05). The 3D implants had greater levels of facial symmetry than the stock implants, although they did not present significant differences.Considering the limitations of this study, mandibular angle implants with a PEEK-based 3D CAD/CAM are efficient, stable and have a low complication rate; the CAD/CAM strategy is useful in facial surgery and can be integrated as a standard for surgical planning in facial makeover surgery.

Three-Dimensional Planning and Surgical Technique for Modified Le Fort I and Le Fort III Osteotomy in Non-Syndromic Patients.

Total midface deficiency, to include the orbits, nose, zygomas, and maxilla, can occur in both syndromic and non-syndromic individuals. The treatment with combination of Le Fort III and I osteotomy could be used and it is few reported in the literature. The aim of the study is to present how technology can make the procedure for the correction of hypoplasia of the middle third more predictable and safer. The 2 clinical cases were managed under submental intubation and using VSP that generated 3D printing of oclusal splints and cutting guides. Modified oblique Le Fort III osteotomy (MOLFIIIO) and Le Fort I osteotomy were used due to patients present large sagittal discrepancy between maxilla and mandible (18 and 17 mm). The patients presented good outcomes without complications. In this study, the authors demonstrate that non-syndromic patient could be managed safety with MOLFIII and Le Fort I osteotomies for the correction of midfacial deformities using virtual surgical planning (VSP) associated with 3D printing technique and piezoelectric surgery.

Influencia de rhBMP-2 en la reparación ósea de defectos críticos con diferentes biomateriales / Influence of rhBMP-2 on bone repair of critical size defects with different biomaterials

La regeneración de defectos óseos críticos requiere la utilización de biomateriales óseos. Así, se han utilizados agentes osteogénicos como la proteína morfogenética (rhBMP-2). El objetivo fue describir la formación ósea de defectos óseos críticos en calota de ratas utilizando rhBMP-2 con distintos biomateriales. Se realizaron dos defectos óseos críticos de 5 mm en 15 calotas de ratas machos adultas divididos en grupo control (sin tratamiento) (C); autoinjerto + rhBMP-2 (A); fosfato tricálcico + rhBMP-2 (BTCP); xenoinjerto de bovino + rhBMP-2 (B) y hidroxihapatita + rhBMP-2 (HA). A las ocho semanas post tratamiento, se realizó la eutanasia y posterior análisis histológico de los defectos. El grupo C no presentó formación de tejido óseo en el defecto. En el resto de los grupos, se formó abundante tejido óseo en los márgenes, por lo tanto, el defecto presentó menor tamaño. El grupo HA presentó formación ósea trabecular con amplios espacios medulares y abundante tejido adiposo. El grupo B-TCP también presentó formación ósea trabecular y la mayoría de las muestras presentaron puente óseo en el defecto. El grupo B presentó partículas de material injertado rodeado por trabéculas óseas y tejido conectivo. En el grupo A, todas las muestras presentaban puente óseo formado por bloques de autoinjerto rodeado por tejido conectivo y óseo. Es posible concluir que los defectos óseos de 5 mm en calota de rata son defectos críticos que requieren utilizar biomateriales para la reparación del defecto. El grupo B-TCP presentó características histológicas más próximas a la regeneración ósea lograda con el Grupo A.

The regeneration of bone critical size defects requires the use of bone biomaterials. Therefore, an osteogenic agent such as bone morphogenetic protein (rhBMP-2) has been used. The objective was to describe the bone formation of bone critical size defects in the rat calvaria using rhBMP-2 with different biomaterials. Two critical bone defects of 5 mm were made in 15 calvaria of adult male rats divided into a control group (without treatment) (C); autograft + rhBMP-2 (A); tricalcium phosphate + rhBMP-2 (B-TCP); bovine xenograft + rhBMP-2 (B) and hydroxyhapatite + rhBMP-2 (HA). At eight weeks post treatment, euthanasia and subsequent histological analysis of the defects were performed. Group C did not show bone tissue formation in the defect. In the rest of the groups, abundant bone tissue formed in the margins, therefore, the defect was smaller. The HA group presented trabecular bone formation with large medullary spaces and abundant adipose tissue. The B-TCP group also presented trabecular bone formation and most of the samples formed a bone bridge across the defect. Group B presented grafted material particles surrounded by bone trabeculae and connective tissue. In group A, all samples presented a bone bridge formed by autograft blocks surrounded by connective and bone tissue. It is possible to conclude that 5 mm bone defects in rat calvaria are critical size defects that require the use of biomaterials for defect repair. The B-TCP group presented histological characteristics similar to the bone regeneration achieved with Group A.

Alveolar Cleft Reconstruction Using Morphogenetic Protein (rhBMP-2): A Systematic Review and Meta-Analysis.

OBJECTIVE: This study aimed to review the existing evidence regarding reconstruction of the alveolar cleft using recombinant human bone morphogenetic protein-2 (rhBMP-2) in terms of bone volume and bone height. DESIGN: Systematic review and meta-analysis. PATIENTS­PARTICIPANTS: A systematic search was done. Randomized and nonrandomized clinical trials, where rhBMP-2 was used in the reconstruction of human alveolar cleft were included. INTERVENTIONS: Reconstruction of alveolar cleft with rhBMP-2. MAIN OUTCOME MEASURES: Average bone volume formation and average bone height formation in the alveolar cleft. Mean difference was calculated and pooled by meta-analysis. RESULTS: Of 709 identified articles, 5 studies met the inclusion criteria. The average bone volume formation was higher in the rhBMP-2 group than in the control group (61.11% vs 59.12%). The average bone height formation was higher in the control group compared to the rhBMP-2 group (75.4% vs 61.5%). The risk of bias in the selected articles was high. The meta-analysis showed that rhBMP-2 treatment may benefit bone formation compared to iliac crest graft (low certainty evidence; mean difference: -208.76; 95% confidence interval: -253.59 to -163.93; -I2 = 0%). CONCLUSIONS: The results obtained in primary articles are promising but have a high risk of bias and have low quality of evidence; therefore, it is necessary to conduct controlled clinical trials with a greater number of patients to recommend the use of rhBMP-2 in the treatment of the alveolar cleft. PROSPERO registration number: CRD42018077741.

PLA/PGA and its co-Polymers in Alveolar Bone Regeneration. A Systematic Review / PLA/PGA y sus Copolímeros en Regeneración Ósea Alveolar. Una Revisión Sistemática

ABSTRACT: The aim of this research was to perform a systematic review to identify the most frequent uses of PLA/ PGA in alveolar bone regeneration and their results. A study was designed to answer the question: What are the most frequent uses of PLA/PLGA and their copolymers in alveolar bone regeneration?. A systematic search was done on MEDLINE, EMBASE and LILACS from April 1993 to December 2017. The search string used on MEDLINE was: (((polylactic acid) OR PLA) OR PLA-based copolymers) OR PLA blends) OR PLA scaffolds)) AND ((("Bone Regeneration"[Mesh]) OR bone regeneration) OR guided bone regeneration). The search was complemented by a manual review of the references from the articles included. Most of the studies selected were weak and, regarding the most frequent uses of PLA/PGA, 13 studies used it as a resorbable membrane, two as an absorbable mesh, one as an absorbable screw and three as filling material. Based on our results, the authors consider that PLA/PGA requires a delicate relation between the mechanical resistance and the degradation process. PLA/PGA does not interrupt bone regeneration; however, the influence in cellular events related to bone regeneration and later osseointegration have not been identified.

RESUMEN: El objetivo de esta revisión fue realizar una revisión sistemática de la literatura para identificar los usos más frecuentes de PLA/PGA en regeneración ósea en área maxilofacial y sus resultados. Se diseñó un estudio para responder a la pregunta: ¿Cuáles son los usos más frecuentes de PLA/PLGA y sus copolímeros en regeneración ósea en el sector maxilofacial?. Los estudios seleccionados fueron en su mayoría débiles y sobre los usos más frecuentes de PLA/PGA, 13 estudios lo utilizaron como membrana reabsorbible, 2 estudios como malla absorbible, un estudio como tornillo absorbible y 3 estudios como material de relleno. En base a nuestros resultados, los autores estiman que PLA/PGA requiere una delicada relación entre la resistencia mecánica que ofrece y la degradación que se produce; PLA/ PGA no interrumpe la regeneración ósea, sin embargo, no se ha identificado la potencialidad o influencia que presenta en los eventos celulares de la regeneración y posterior oseointegración.

Odontodisplasia Regional y Agenesia de Premolares. Reporte de un Caso / Regional Odontodysplasia and Premolar Agenesis. Case Report

RESUMEN: La odontodisplasia regional (OR) es una alteración en el desarrollo, no hereditario y que afecta tanto la dentición temporal como la dentición definitiva. Involucra a los tejidos mesodérmicos y ectodérmicos de los dientes lo que es condescendiente con hallazgos clínicos, radiográficos e histológicos. Su etiología aun es desconocida y se presenta mayoritariamente en mujeres. Clínicamente puede afectar al maxilar, a la mandíbula o ambas arcadas pero generalmente solo se ve comprometida una ellas, principalmente el más afectado es el hueso maxilar. Radiográficamente se observa una pobre diferencia entre los tejidos del esmalte y la dentina, siendo tejidos menos radiopacos que su contraparte sana generando un aspecto descrito como "diente fantasma". Histológicamente se observan zonas hipocalcificadas del esmalte con un orden de prismas irregulares mientras que la dentina se observa con un número reducido de túbulos dentinarios y de consistencia más fibrosa en su zona coronal. El tratamiento de la OR es controversial ya que su incidencia es baja y la literatura al respecto no es clara. El objetivo de este manuscrito, fue reportar un caso de OR y revisar la literatura relacionada. Presentamos un caso de OR en una paciente de 12 años que presenta ausencia de los dientes 2.4, 2.5 y 2.6; restos radiculares y agenesia de los dientes 3.5 y 4.5. Se describirán sus aspectos clínicos, radiográficos e histológicos. Se realizó una búsqueda sistemática en las siguientes bases de datos: Clínical key, Science Direct, PubMed y SciELO.

ABSTRACT: Regional odontodysplasia (RO) is a variation in the development; it is not hereditary and it affects both deciduous and permanent dentition. It involves the mesodermal and ectodermal tissues of dental pieces, and coincides with clinical, radiographic and histological findings. Its etiology is still unknown and it reportedly occurs mostly in women. Clinically it can affect the maxilla, mandible or both arches but generally only one is compromised, mainly the maxilla which is affected the most. Radiographically there is limited difference between enamel and dentin tissue, which is less radiopaque than their healthy counterpart, generating an aspect described as "phantom tooth". Histologically hypocalcified areas of the enamel are observed with an irregular order of prisms while the dentine is observed with a reduced number of dentinal tubules and more fibrous consistency in the coronal area. RO treatment is controversial since its incidence is low and the literature on these events is not clear. The aim of this manuscript was to report a case of RO and review related literature. We present a case of RO in a 12-year-old patient who presents absence of parts 2.4.2.5 and 2.6; radicular remains and agenesis of parts 3.5 and 4.5. Its clinical, radiographic and histological aspects are described. A systematic search was carried out in the following databases: Clinical key, Science Direct, PubMed and SciELO.

Histological Analysis of Bone Repair in Mandibular Body Osteotomy Using Internal Fixation System in Three Different Gaps without Bone Graft in an Animal Model.

The aim was to analyze histologically the bone repair in a mandibular osteotomy model with different gaps between the segments. Nine male rabbits who underwent osteotomies on the mandibular body were fixed with a 1.5 system plate and no bone graft; group 1 (2 mm gap between segments), group 2 (5 mm gap between segments), and group 3 (8 mm gap between segments) were included. After 8 weeks they were euthanized and the sample was processed for histological analysis. Group 1 showed advanced bone repair with cartilaginous tissue and cancellous bone, showing osteoblasts and type III collagenous fibers. In group 2, a more delayed ossification was observed, with an extensive area of peripheral ossifying cartilage and chondrocytes in greater number at the center of the defect; group 3 showed no evidence of ossification with fibrous tissue, a very low level of chondrocytes, and some bone sequestrate. We can conclude that, in this animal model, 2 or 5 mm gap in the osteotomy could be repaired as bone when fixation is used. The size of the gap is an important factor for the use of bone grafts considering endochondral ossification. This model can be used for graft analysis and related technologies.

Characterization of bone substitute beta946; -TCP block for maxillofacial reconstruction / Caracterización del bloque beta946; -TCP de sustitución ósea para la reconstrucción maxilofacial

SUMMARY: The aim of this study was to characterize a commercial beta tricalcium phosphate (β-TCP) block allograft for use in maxillofacial reconstruction, evaluating its homogeneity, porosity and mineralization. Two commercial 5 x 5 x10 mm chronOS Vivify β-TCP blocks were used, which were evaluated by a STEM SU-3500 variable pressure scanning electron microscope (SEM-STEM) (Hitachi, Japan). For the semi-quantitative microanalysis of elements, the QUANTAX 100 energy dispersive x-ray spectrometer detector (EDX) (Bruker, Germany) was used. The homogeneity of the structural morphology, macropore and micropore size and component homogeneity were evaluated. The microscopic analysis showed micropores of 164.92 mm (± 35.032 mm) in diameter in the outer area and micropores in the inner area of 54.44 mm (± 17.676 mm). The formation of porosities and irregularities present in the block was heterogeneous between the outer and inner surfaces. The mineral content of the blocks presented homogeneity with the presence of carbon (2.02 %), oxygen (44.33 %), phosphate (16.62 %) and calcium (37.87 %). The β-TCP block can be used in bone reconstruction but the presence of reduced macropore and micropore sizes could limit efficiency in the substitution and bone regeneration phase.

RESUMEN: El objetivo de este estudio fue caracterizar un aloinjerto de bloqueo de fosfato tricálcico (β-TCP) comercial para su uso en la reconstrucción maxilofacial, evaluando su homogeneidad, porosidad y mineralización. Se utilizaron dos bloques comerciales de 5 x 5 x 10 mm de vivify β-TCP de chronOS, que se evaluaron mediante un microscopio electrónico de barrido de presión variable STEM SU-3500 (SEM-STEM) (Hitachi, Japón). Para el microanálisis de elementos semicuantitativo, se utilizó el detector de espectrómetro de rayos X de dispersión de energía QUANTAX 100 (EDX) (Bruker, Alemania). Se evaluó la homogeneidad de la morfología estructural, el tamaño del macroporo y microporo y la homogeneidad de los componentes. El análisis microscópico mostró microporos de 164,92 mm (± 35,032 mm) de diámetro en el área externa y microporos en el área interna de 54,44 mm (± 17,676 mm). La formación de porosidades e irregularidades presentes en el bloque fue heterogénea entre las superficies externas e internas. El contenido mineral de los bloques presentó homogeneidad con la presencia de carbono (2,02 %), oxígeno (44,33 %), fosfato (16,62 %) y calcio (37,87 %). El bloque β-TCP se puede utilizar en la reconstrucción ósea, pero la presencia de macroporos y tamaños de microporos reducidos podría limitar la eficacia en la fase de sustitución y regeneración ósea.

Three-dimensional analysis of nasolabial soft tissues while smiling using stereophotogrammetry (3dMDTM) / Análisis tridimensional de los tejidos blandos nasolabiales en sonrisa utilizando estereofotogrametría (3dMDTM)

SUMMARY: The nasolabial region is the central esthetic unit of the face and is considered one of the most important determinants of the facial esthetic. The facial morphometry of soft tissues is a very important tool in facial surgery. Advances have been made recently in the capture and analysis of 3D images, which offer great development potential in the diagnosis and treatment of facial deformities. The aim of this study was to characterize the nasolabial region of patient candidates for orthognathic surgery using 3D facial captures. A study was conducted to characterize the width of the nasal base and the nasolabial angle in adult patients through 3D photographs. 30 subjects were included, taking two 3D photos each, one in a resting position and the other smiling. The three-dimensional capture was done with the 3dMDface System. The measurements were taken with the 3dMD Vultus software. The length of the alar base was an average of 34.3 ± 2.6 mm at rest, and 39.1 ± 2.9 mm smiling. The mean of the nasolabial angle was 104.6 ± 9.6° at rest and 105.4 ± 14.3º smiling. Additionally, the distance of the alar base smiling compared to its distance at rest increased an average of 4.83 mm, whereas the nasolabial angle smiling increased an average of 0.8º compared to at rest. In this study, the nasolabial angle did not present any significant changes so that its assessments in the case of facial modifications can be standard; the width of the nasal base is significantly modified with the smile and thus a more intense study of any type of modification in this area is required.

RESUMEN: La región nasolabial es la unidad estética central de la cara y se considera uno de los determinantes más importantes de la estética facial. La morfometría facial en tejidos bandos, es una herramienta de gran importancia en Cirugía Facial. En el último tiempo, se han realizado avances en captura y análisis de imágenes 3D, las cuales ofrecen un gran potencial de desarrollo en el diagnóstico y tratamiento de las deformidades faciales. El objetivo de éste trabajo fue caracterizar mediante capturas faciales 3D la región nasolabial de pacientes candidatos a cirugía ortognática. Se realizó un estudio para caracterizar a través de fotografías tridimensionales de pacientes adultos el ancho de la base nasal y el ángulo nasolabial. Se incluyeron 30 sujetos, tomando 2 fotografías 3D a cada uno, una en posición de reposo y otra en sonrisa. Se realizó la captura tridimensional con la camara facial 3dMDface System. Las mediciones fueron realizadas con el software 3dMD Vultus. La longitud de base alar en reposo, fue en promedio de 34,3 ± 2,6 mm, y de 39,1 ± 2,9 mm, en sonrisa. Por otra parte, la media del ángulo nasolabial en reposo fue de 104,6 ± 9,6° y en sonrisa, de 105,4 ± 14,3º. Por otro lado, la distancia de la base alar en sonrisa respecto a su distancia en reposo, aumentó un promedio de 4,83 mm, mientras que el ángulo nasolabial en sonrisa, aumentó en promedio 0,8º respecto a la posición de reposo. En esta investigación, el ángulo nasolabial no presentó cambios significativos de forma que su valoración frente a modificaciones faciales puede ser estándar; el ancho de base nasal se modifica significativamente con la sonrisa de forma que su estudio debe ser más agudo frente a cualquier tipo de modificación en esta zona.

Colgajos Microvascularizados en Reconstrucción Maxilofacial: Avances de la Microcirugía / Microvascularized flaps in Maxillofacial Reconstruction: Advances in Microsurgery

RESUMEN: La reconstrucción de la cabeza y el cuello contempla avances importantes a lo largo de los años. Los colgajos microvasculares se han convertido en la primera opción de tratamiento en grandes defectos del territorio maxilofacial, mientras tanto, la tecnología con el uso de microscopía y luego las imágenes como CT, angiografía por tomografía computarizada, dispositivo ultrasónico, RNM o Doppler contribuyen a lograr una predictibilidad excepcional de estos colgajos microvasculares. Por lo general, la técnica de anastomosis consiste en una sutura de 9-0 en 360°, pero existen autores que han descrito diversos métodos que no son de sutura con un rendimiento aceptable. Existe un buen número de diferentes colgajos microvasculares, cuatro de ellos son los más comunes en la reconstrucción maxilofacial: fíbula, ilíaco, antebrazo radial, escápula. Además el colgajo anterolateral, muy útil en defectos de piel y tejidos blandos. La evolución de los colgajos microvasculares implica los colgajos quiméricos, muy útiles en defectos grandes. El objetivo de este artículo es describir y exponer el desarrollo de la microcirugía y las diversas opciones de colgajos microvasculares en la reconstrucción maxilofacial.

ABSTRACT: Head and neck reconstruction have shown important advances over the years. Microvasculars flaps transfer has become the first treatment option in large defects of the maxillofacial area. Meanwhile technology through the use of microscopy and the subsequent use of images such as CT, CT angiography, RNM or Doppler ultrasonic device, and additional new techniques have contributed to an exceptional predictability of these microvascular flaps. Typically, the anastomosis technique consists in 9-0 suture in 360°, but since the vascular flaps exist, authors have described diverse non-suture methods with acceptable performance. There are a number of different microvasculars flaps, four of them are the most common in maxillofacial reconstruction: fibula, iliac, radial forearm, scapula. In addition the anterolateral tight flap, very useful in skin and soft tissues defects. The microvascular flaps evolution involves the chimeric flaps that are useful in large defects. The aim of this article is to describe and expose microsurgery development and the diverse microvascular flap options in maxillofacial reconstruction.

Osteosíntesis Bioreabsorbible Bioactivo (Hidroxiapatita/Poly L-lactido) en Osteotomía Le Fort I Segmentada / Bioresorbable Bioactive Osteosynthesys (Hidroxiapatite/Poly L-lactide) in Le Fort I Segmented Osteotomy

RESUMEN: El objetivo de este artículo es presentar un caso clínico con la utilización de un innovador sistema de osteosíntesis basado en la mezcla de hidroxiapatita (HA) y acido poliláctico (PLLA). La paciente fue admitida en el Hospital Abraham González Peña de Lautaro (Chile) debido a una deformidad facial que exigió realizar una cirugía ortognática monomaxilar para avance y aumento transversal del maxilar; se utilizaron placas de tipo L y tornillos de HA/PLLA de 5 mm para la fijación maxilar, realizando la cirugía sin complicaciones; el proceso técnico y alta hospitalaria se ejecutó de forma convencional. Se realizó un análisis de la literatura donde se analiza la versatilidad, la seguridad y la estabilidad de segmentos cuando se utiliza este innovador material y se concluye que este tipo de osteosíntesis es aplicable a cirugía maxilofacial, exigiendo una curva de aprendizaje por parte del cirujano, necesaria para obtener resultados adecuados.

ABSTRACT: The aim of this paper is to show a clinical case, where was used an innovative osteosynthesys system based on the mixture of hidroxiapatite (HA) and polilactic acid (PLLA). The patient was admitted into Abraham González Peña Hospital (Chile), showing a facial deformity to treat with monomaxillary orthognathic surgery for advance and transversal increase of the maxilla.; were used type L plates and 5 mm screws of HA/PLLA for the internal fixation, performing the surgery without complications; the technical process and the ALTA hospital was realized in a conventional strategy. Was realized a literature review showing the versatility, safe and stability of bone segment when used this innovative material and it´s concluded that this osteosynthesis system can be used normally in maxillofacial surgery; a learning curve to learn about this material is needed by surgeons.

Temporomandibular Joint Ankylosis: Algorithm of Treatment.

: Temporomandibular joint ankylosis, according to age of onset, causes severe functional and morphological disorders, as well as stunted craniofacial growth and development.The primary goal of treatment is to resolve the functional and morphological disorders. METHOD: Pre- and posttreatment clinical and cephalometric registries were conducted in 15 patients with temporomandibular joint ankylosis over a 10-year period (2002-2012). All the patients underwent complete removal of the ankylotic block, gap arthroplasty, and ipsilateral coronoidectomy. Distraction osteogenesis was performed on 12 patients. RESULTS: Fifteen patients, 8 female and 7 male, ranging from 3 to 30 years of age, were included in this study. The posttreatment follow-up period ranged from 3 to 13 years.The mean preoperative maximum mouth opening was 3 ± 1.7 mm, and the mean postoperative maximum mouth opening was 36 ± 6.5 mm. The labial inclination with respect to the true horizontal decreased considerably (6.2° ± 2.3° preoperative to 1° ± 1.6° postoperative). A correction of the mandibular deviation was measured at the symphysis with respect to the facial midline (8° ± 2° preoperative to 2° postoperative). Finally, the height ratio of both mandibular rami (the healthy side and the affected side) decreased considerably (1.27 ± 0.05 preoperative to 1.07 ± 0.06 postoperative).Reankylosis only occurred in 2 patients, who were then successfully treated by means of gap arthroplasty. CONCLUSIONS: The therapeutic algorithm proposed in the present work provides favorable functional and morphological results. Early and aggressive functional physiotherapy is essential to minimize the risk of reankylosis.

Cortical and cancellous bone in mandibular symphysis: implications in osteosynthesis and osteotomy / Hueso cortical y esponjoso en sínfisis mandibular: implicancias en osteotomía y osteosíntesis

The aim of this study was to quantify the presence of cortical and cancellous bone in the mandibular symphysis. A descriptive study was conducted using cone beam computed tomography where skeletal class I and class III subjects were included, defined according to characteristics detected on dental, clinical and dental occlusion x-rays. From the 3D reconstruction, sections were used in relation to the axial axis of the teeth of the anterior sector; the amount of buccal cortical, cortical, lingual, inferior cortical and cancellous bone as well as symphysis height were determined. The measurements were taken using routine methods and analyzed with ANOVA and Tukey's HSD test with p <0.05 for statistical significance. 20 skeletal class I subjects aged 23 years (± 4.5) and 20 class III subjects aged 22 years (± 5.2) were included. Symphysis height was significantly greater in skeletal class III subjects, exceeding by 0.8 mm the height of class I subjects; the buccal cortical bone presented on average 2 mm less at different dental levels, whereas the lingual cortical and inferior basal bones were significantly larger than the buccal cortical bone. The cancellous and cortical bones did not present any significant differences between the two groups (p=0.093). The buccal and basilar cortical bone is smaller than lingual cortical bone.

El objetivo fue determinar la presencia de hueso cortical y esponjoso en sínfisis mandibular. Se realizó un estudio descriptivo en tomografías computadorizadas cone beam donde se analizaron sujetos clase I y clase III esqueletal definidos según características dentales, clínicas y radiográficas de oclusión dental y características radiográficas. Desde la reconstrucción 3D se utilizaron cortes en relación al eje axial de los dientes del sector anterior; en ellos se determinó la cantidad de hueso cortical bucal, cortical, lingual, cortical inferior, hueso esponjoso y altura de sínfisis. Las mediciones fueron realizadas con métodos de rutina y fueron analizados con la prueba ANOVA y HDS Turkey considerando un valor de p <0.05 para considerar significancia estadística. 20 sujetos clase I esqueletal con 23 años (+ 4.5) y 20 sujetos clase III esqueletal con edad de 23 años (+ 4.5) fueron incluidos. La altura de sínfisis fue significativamente mayor en sujetos de clase III esqueletal, superando por 0.8 mm la altura de sujetos clase I; el hueso cortical bucal presento en promedio menor de 2 mm en diferentes niveles dentarios, mientras que la cortical lingual y basal inferior fueron significativamente mayor que la cortical bucal. El hueso esponjoso y hueso cortical no presentó diferencias significativas entre ambos grupos (p=0.093). La cortical bucal y basilar son menores que el hueso cortical lingual.

Modelo experimental para el estudio de la reconstrucción mandibular: opciones en conejos Oryctolagus cuniculus / Experimental model for the study of mandibular reconstruction: options in rabbits Oryctolagus cuniculus

El propósito de este estudio fue de evaluar la técnica quirúrgica propuesta para estudios de resección y reconstrucción mandibular en modelos experimentales en conejos. Se utilizaron 7 conejos neozelandeses (Orictolagus cuniculus), en los cuales se realizó la resección del cuerpo mandibular izquierdo, una vez asegurada la movilidad de los segmentos, se reconstruyó con placa de osteosíntesis de titanio de 1,5 mm y tornillos monocorticales de 5 mm, en la zona resecada se fijó un bloque de beta fosfato tricálcico y estabilizado con tornbillo de 1,2 mm. Se sacrificaron los animales a los 2 meses. Todos los animales sobrevivieron al procedimiento y se pudo llevar a cabo la resección y reconstrucción en todos ellos. No se presentaron signos ni síntomas de infección en el sitio quirúrgico mientras duró el experimento. El tiempo promedio de cirugía fue de 68 minutos. El peso promedio de los animales fue de 3925 g, la pérdida promedio de peso fue de 2,03 %. No se realizó eutanasia de ningún animal por motivos de sufrimiento. Al examen macroscópico de las muestras extraídas se observó la presencia de todos los elementos de osteosíntesis en posición, así como continuidad de la estructura ósea casi en su totalidad en la superficie . La utilización de conejos en modelos de reconstrucción maxilofacial es un modelo probado debido a la similitud de los procesos reparativos, su facilidad de manipulación y cuidados. El modelo propuesto representa una alternativa más cercana a los procesos reconstructivos en cirugía resectiva maxilofacial, debido a que somete los injertos a las fuerzas propias de la masticación y de la función orofacial.

The purpose of this study was to evaluate the surgical technique proposed for studies of resection and mandibular reconstruction in experimental models in rabbits. Seven rabbits (Orictolagus cuniculus) were used, in which the left mandibular body was resected, once the mobility of the segments was assured, reconstructed with 1.5 mm titanium osteosynthesis plate and monocortical screws of 5 mm, in the resected area a block of beta-tricalcium phosphate was stabilized and stabilized with tornbillo of 1.2 mm. The animals were sacrificed at 2 months. All animals survived the procedure, and resection and reconstruction were performed in all of them. There were no signs or symptoms of infection at the surgical site during the experiment. The average length of surgery was 68 minutes. The average weight of the animals was 3.925 g, the average weight loss was 2.03 %. No animal was euthanized for reasons of suffering. Macroscopic examination of the extracted samples showed the presence of all elements of osteosynthesis in position, as well as continuity of the bone structure almost entirely on the surface. The use of rabbits in models of maxillofacial reconstruction is a proven model due to the similarity of the reparative processes, their ease of manipulation and care. Our proposed model represents a closer alternative to the reconstructive processes in maxillofacial resective surgery, because it subjects the grafts to the forces of chewing and orofacial function.

Resección de osteoma fronto-naso-maxilar: desafío anatómico con asistencia de estereolitografía y sistema piezoeléctrico / Resection of fronto-naso-maxillary osteoma: anatomic challenge assisted with stereolithography and piezoelectric system

Los osteomas fronto-etmoidales son los tumores benignos más frecuentes de los senos paranasales, pudiendo evolucionar con complicaciones por compresión de estructuras adyacentes. Se presenta el caso de una paciente de 63 años de edad, que consultó por aumento de volumen nasofrontal, cefalea y diplopía. Tras el examen clínico, se evidenció una asimetría facial con lateralización del bulbo ocular derecho y exoftalmo. La tomografía de los senos paranasales mostró una lesión que ocupa parcialmente el seno frontal, etmoidal y parte de la cavidad nasal. Los cuidados anatómicos y planificación quirúrgica se desarrollaron en un modelo estereolitográfico mientras que la cirugía de exéresis total se realizó con ayuda del sistema piezoeléctrico. El examen histológico confirmó el diagnostico de osteoma. Se obtuvo una reconstrucción exitosa, recuperando totalmente simetría y función ocular.

Fronto-ethmoidal osteomas are the most frequent benign tumors of the paranasal sinuses, and may evolve with complications by compression of adjacent structures. The case is a 63-year-old female patient, who consulted about increased nasofrontal volume, headache and diplopia. After the clinical exam, she presented a facial asymmetry with lateralization of the right eyeball and exophthalmus. Computed tomography of the sinuses showed a lesion that partially occupies the frontal sinus, ethmoidal sinus and part of the nasal cavity. The anatomical care and surgical planning was developed in a stereolithographic model while the total excision surgery was performed with the help of the piezoelectric system. Histological examination confirmed the diagnosis of osteoma. A successful reconstruction is obtained, fully recovering symmetry and ocular function.