RESUMEN
Metallic lithium (Li) is the most attractive anode for Li batteries because it holds the highest theoretical specific capacity (3860 mA h g-1) and the lowest redox potential (-3.040 V vs SHE). However, the poor interface stability of the Li anode, which is caused by the high reactivity and dendrite formation of metallic Li upon cycling, leads to undesired electrochemical performance and safety issues. While two-dimensional boron nitride (BN) nanosheets have been utilized as an interfacial layer, the mechanism on how they stabilize the Li-electrolyte interface remains elusive. Here, we show how BN nanosheet interlayers suppress Li dendrite formation, enhance Li ion transport kinetics, facilitate Li deposition, and reduce electrolyte decomposition. We show through both simulation and experimental data that the desolvation process of a solvated Li ion within the interlayer nanochannels kinetically favors Li deposition. This process enables long cycling stability, reduced voltage polarization, improved interface stability, and negligible volume expansion. Their application as an interfacial layer in symmetric cells and full cells that display significantly improved electrochemical properties is also demonstrated. The knowledge gained in this study provides both critical insights and practical guidelines for designing a Li metal anode with significantly improved performance.
RESUMEN
Chromium oxide (Cr2O3) is a beneficial metal oxide used to prevent the backward reaction in photocatalytic water splitting. The present work investigates the stability, oxidation state, and the bulk and surface electronic structure of Cr-oxide photodeposited onto P25, BaLa4Ti4O15, and Al:SrTiO3 particles as a function of the annealing process. The oxidation state of the Cr-oxide layer as deposited is found to be Cr2O3 on the surface of P25 and Al:SrTiO3 particles and Cr(OH)3 on BaLa4Ti4O15. After annealing at 600 °C, for P25 (a mixture of rutile and anatase TiO2), the Cr2O3 layer diffuses into the anatase phase but remains at the surface of the rutile phase. For BaLa4Ti4O15, Cr(OH)3 converts to Cr2O3 upon annealing and diffuses slightly into the particles. However, for Al:SrTiO3, the Cr2O3 remains stable at the surface of the particles. The diffusion here is due to the strong metal-support interaction effect. In addition, some of the Cr2O3 on the P25, BaLa4Ti4O15, and Al:SrTiO3 particles is reduced to metallic Cr after annealing. The effect of Cr2O3 formation and diffusion into the bulk on the surface and bulk band gaps is investigated with electronic spectroscopy, electron diffraction, DRS, and high-resolution imaging. The implications of the stability and diffusion of Cr2O3 for photocatalytic water splitting are discussed.
RESUMEN
Radio frequency (RF) magnetron sputtering allows the fabrication of TiO2 films with high purity, reliable control of film thickness, and uniform morphology. In the present study, the change in surface roughness upon heating two different thicknesses of RF sputter-deposited TiO2 films was investigated. As a measure of the process of the change in surface morphology, chemically -synthesised phosphine-protected Au9 clusters covered by a photodeposited CrOx layer were used as a probe. Subsequent to the deposition of the Au9 clusters and the CrOx layer, samples were heated to 200 â to remove the triphenylphosphine ligands from the Au9 cluster. After heating, the thick TiO2 film was found to be mobile, in contrast to the thin TiO2 film. The influence of the mobility of the TiO2 films on the Au9 clusters was investigated with X-ray photoelectron spectroscopy. It was found that the high mobility of the thick TiO2 film after heating leads to a significant agglomeration of the Au9 clusters, even when protected by the CrOx layer. The thin TiO2 film has a much lower mobility when being heated, resulting in only minor agglomeration of the Au9 clusters covered with the CrOx layer.
RESUMEN
Atomically precise gold clusters are highly desirable due to their well-defined structure which allows the study of structure-property relationships. In addition, they have potential in technological applications such as nanoscale catalysis. The structural, chemical, electronic, and optical properties of ligated gold clusters are strongly defined by the metal-ligand interaction and type of ligands. This critical feature renders gold-phosphine clusters unique and distinct from other ligand-protected gold clusters. The use of multidentate phosphines enables preparation of varying core sizes and exotic structures beyond regular polyhedrons. Weak gold-phosphorous (Au-P) bonding is advantageous for ligand exchange and removal for specific applications, such as catalysis, without agglomeration. The aim of this review is to provide a unified view of gold-phosphine clusters and to present an in-depth discussion on recent advances and key developments for these clusters. This review features the unique chemistry, structural, electronic, and optical properties of gold-phosphine clusters. Advanced characterization techniques, including synchrotron-based spectroscopy, have unraveled substantial effects of Au-P interaction on the composition-, structure-, and size-dependent properties. State-of-the-art theoretical calculations that reveal insights into experimental findings are also discussed. Finally, a discussion of the application of gold-phosphine clusters in catalysis is presented.
RESUMEN
The properties of semiconductor surfaces can be modified by the deposition of metal clusters consisting of a few atoms. The properties of metal clusters and of cluster-modified surfaces depend on the number of atoms forming the clusters. Deposition of clusters with a monodisperse size distribution thus allows tailoring of the surface properties for technical applications. However, it is a challenge to retain the size of the clusters after their deposition due to the tendency of the clusters to agglomerate. The agglomeration can be inhibited by covering the metal cluster modified surface with a thin metal oxide overlayer. In the present work, phosphine-protected Au clusters, Au9(PPh3)8(NO3)3, were deposited onto RF-sputter deposited TiO2 films and subsequently covered with a Cr2O3 film only a few monolayers thick. The samples were then heated to 200 °C to remove the phosphine ligands, which is a lower temperature than that required to remove thiolate ligands from Au clusters. It was found that the Cr2O3 covering layer inhibited cluster agglomeration at an Au cluster coverage of 0.6% of a monolayer. When no protecting Cr2O3 layer was present, the clusters were found to agglomerate to a large degree on the TiO2 surface.
RESUMEN
Recently, the creation of new heterogeneous catalysts using the unique electronic/geometric structures of small metal nanoclusters (NCs) has received considerable attention. However, to achieve this, it is extremely important to establish methods to remove the ligands from ligand-protected metal NCs while preventing the aggregation of metal NCs. In this study, the ligand-desorption process during calcination was followed for metal-oxide-supported 2-phenylethanethiolate-protected gold (Au) 25-atom metal NCs using five experimental techniques. The results clearly demonstrate that the ligand-desorption process consists of ligand dissociation on the surface of the metal NCs, adsorption of the generated compounds on the support and desorption of the compounds from the support, and the temperatures at which these processes occurred were elucidated. Based on the obtained knowledge, we established a method to form a metal-oxide layer on the surface of Au NCs while preventing their aggregation, thereby succeeding in creating a water-splitting photocatalyst with high activity and stability.
RESUMEN
The photocatalytic properties of titania (TiO2) have prompted research utilising its useful ability to convert solar energy into electron-hole pairs to drive novel chemistry. The aim of the present work is to examine the properties required for a synthetic method capable of producing thin TiO2 films, with well defined, easily modifiable characteristics. Presented here is a method of synthesis of TiO2 nanoparticulate thin films generated using RF plasma capable of homogenous depositions with known elemental composition and modifiable properties at a far lower cost than single-crystal TiO2. Multiple depositions regimes were examined for their effect on overall chemical composition and to minimise the unwanted contaminant, carbon, from the final film. The resulting TiO2 films can be easily modified through heating to further induce defects and change the electronic structure, crystallinity, surface morphology and roughness of the deposited thin film.
