RESUMEN
Research on metal halide perovskites as absorbers for X-ray detection is an attractive subject due to the optimal optoelectronic properties of these materials for high-sensitivity applications. However, the contact degradation and the long-term instability of the current limit the performance of the devices, in close causality with the dual electronic-ionic conductivity of these perovskites. Herein, millimeter-thick methylammonium-lead bromide (MAPbBr3) single and polycrystalline samples are approached by characterizing their long-term dark current and photocurrent under X-ray incidence. It is shown how both the dark current and the sensitivity of the detectors follow similar trends at short-circuit (V = 0 V) after biasing. By performing drift-diffusion numerical simulations, it is revealed how large ionic-related built-in fields not only produce relaxations to equilibrium lasting up to tens of hours but also continue to affect the charge kinetics under homogeneous low photogeneration rates. Furthermore, a method is suggested for estimating the ionic mobility and concentration by analyzing the initial current at short-circuit and the characteristic diffusion times.
RESUMEN
Despite the promising properties of tin-based halide perovskites, one clear limitation is the fast Sn+2 oxidation. Consequently, the preparation of long-lasting devices remains challenging. Here, we report a chemical engineering approach, based on adding Dipropylammonium iodide (DipI) together with a well-known reducing agent, sodium borohydride (NaBH4), aimed at preventing the premature degradation of Sn-HPs. This strategy allows for obtaining efficiencies (PCE) above 10% with enhanced stability. The initial PCE remained unchanged upon 5 h in air (60% RH) at maximum-power-point (MPP). Remarkably, 96% of the initial PCE was kept after 1,300 h at MPP in N2. To the best of our knowledge, these are the highest reported values for Sn-based solar cells. Our findings demonstrate a beneficial synergistic effect when additives are incorporated, highlight the important role of iodide in the performance upon light soaking, and, ultimately, unveil the relevance of controlling the halide chemistry for future improvement of Sn-based perovskite devices.
RESUMEN
Small-perturbation techniques such as impedance spectroscopy (IS), intensity-modulated photocurrent spectroscopy (IMPS), and intensity-modulated photovoltage spectroscopy (IMVS) are useful tools to characterize and model photovoltaic and photoelectrochemical devices. While the analysis of the impedance spectra is generally carried out using an equivalent circuit, the intensity-modulated spectroscopies are often analyzed through the measured characteristic response times. This makes the correlation between the two methods of analysis generally unclear. In this work, by taking into consideration the absorptance and separation efficiency, a unified theoretical framework and a procedure to combine the spectral analysis of the three techniques are proposed. Such a joint analysis of IS, IMPS, and IMVS spectra greatly reduces the sample space of possible equivalent circuits to model the device and allows obtaining parameters with high reliability. This theoretical approach is applied in the characterization of a silicon photodiode to demonstrate the validity of this methodology, which shows great potential to improve the quality of analysis of spectra obtained from frequency domain small-perturbation methods.
RESUMEN
Negative capacitance in the low-frequency domain and inverted hysteresis are familiar features in perovskite solar cells, which origin is still under discussion. Here we use impedance spectroscopy to analyze these responses in methylammonium lead bromide cells treated with lithium cations at the electron-selective layer/perovskite interface and in iodide devices exposed to different relative humidity conditions. Employing the surface polarization model, we obtain a time constant associated with the kinetics of the interaction of ions/vacancies with the surface, τkin, in the range of 100-102 s for all the cases exhibiting both features. These interactions lead to a decrease in the overall recombination resistance, modifying the low-frequency perovskite response and yielding a flattening of the cyclic voltammetry. As a consequence of these results we find that negative capacitance and inverted hysteresis lead to a decrease in the fill factor and photovoltage values.
