Diabetes-related lower limb wounds: Antibiotic susceptibility pattern and biofilm formation.

The expeditious incidence of diabetes mellitus in Riyadh, Saudi Arabia, there is a significant increase in the total number of people with diabetic foot ulcers. For diabetic lower limb wound infections (DLWs) to be effectively treated, information on the prevalence of bacteria that cause in this region as well as their patterns of antibiotic resistance is significant. Growing evidence indicates that biofilm formers are present in chronic DFU and that these biofilm formers promote the emergence of multi-drug antibiotic resistant (MDR) strains and therapeutic rejection. The current study targeted to isolate bacteria from wounds caused by diabetes specifically at hospitals in Riyadh and assess the bacterium's resistance to antibiotics and propensity to develop biofilms. Totally 63 pathogenic microbes were identified from 70 patients suffering from DFU. Sixteen (25.4%) of the 63 bacterial strains were gram-positive, and 47 (74.6%) were gram-negative. Most of the gram-negative bacteria were resistant to tigecycline, nitrofurantoin, ampicillin, amoxicillin, cefalotin, and cefoxitin. Several gram-negative bacteria are susceptible to piperacillin, meropenem, amikacin, gentamicin, imipenem, ciprofloxacin, and trimethoprim. The most significant antibiotic that demonstrated 100% susceptibility to all pathogens was meropenem. Serratia marcescens and Staphylococcus aureus were shown to have significant biofilm formers. MDR bacterial strains comprised about 87.5% of the biofilm former strains. To the best of our knowledge, Riyadh, Saudi Arabia is the first region where Serratia marcescens was the most common bacteria from DFU infections. Our research findings would deliver information on evidence-based alternative strategies to develop effective treatment approaches for DFU treatment.

Unraveling the shift in bacterial communities profile grown in sediments co-contaminated with chlorolignin waste of pulp-paper mill by metagenomics approach.

Pulp-paper mills (PPMs) are known for consistently generating a wide variety of pollutants, that are often unidentified and highly resistant to environmental degradation. The current study aims to investigate the changes in the indigenous bacterial communities profile grown in the sediment co-contaminated with organic and inorganic pollutants discharged from the PPMs. The two sediment samples, designated PPS-1 and PPS-2, were collected from two different sites. Physico-chemical characterization of PPS-1 and PPS-2 revealed the presence of heavy metals (mg kg-1) like Cu (0.009-0.01), Ni (0.005-0.002), Mn (0.078-0.056), Cr (0.015-0.009), Pb (0.008-0.006), Zn (0.225-0.086), Fe (2.124-0.764), Al (3.477-22.277), and Ti (99.792-45.012) along with high content of chlorophenol, and lignin. The comparative analysis of organic pollutants in sediment samples using gas chromatography-mass spectrometry (GC-MS) revealed the presence of major highly refractory compounds, such as stigmasterol, ß-sitosterol, hexadecanoic acid, octadecanoic acid; 2,4-di-tert-butylphenol; heptacosane; dimethyl phthalate; hexachlorobenzene; 1-decanol,2-hexyl; furane 2,5-dimethyl, etc in sediment samples which are reported as a potential toxic compounds. Simultaneously, high-throughput sequencing targeting the V3-V4 hypervariable region of the 16S rRNA genes, resulted in the identification of 1,249 and 1,345 operational taxonomic units (OTUs) derived from a total of 115,665 and 119,386 sequences read, in PPS-1 and PPS-2, respectively. Analysis of rarefaction curves indicated a diversity in OTU abundance between PPS-1 (1,249 OTUs) and PPS-2 (1,345 OTUs). Furthermore, taxonomic assignment of metagenomics sequence data showed that Proteobacteria (55.40%; 56.30%), Bacteoidetes (11.30%; 12.20%), and Planctomycetes (5.40%; 4.70%) were the most abundant phyla; Alphproteobacteria (20.50%; 23.50%), Betaproteobacteria (16.00%; 12.30%), and Gammaproteobacteria were the most recorded classes in PPS-1 and PPS-2, respectively. At the genus level, Thiobacillus (7.60%; 4.50%) was the most abundant genera grown in sediment samples. The results indicate significant differences in both the diversity and relative abundance of taxa in the bacterial communities associated with PPS-2 when compared to PPS-1. This study unveils key insights into contaminant characteristics and shifts in bacterial communities within contaminated environments. It highlights the potential for developing efficient bioremediation techniques to restore ecological balance in pulp-paper mill waste-polluted areas, stressing the importance of identifying a significant percentage of unclassified genera and species to explore novel genes.

Versatility of copper-iron bimetallic nanoparticles fabricated using Hibiscus rosa-sinensis flower phytochemicals: various enzymes inhibition, antibiofilm effect, chromium reduction and dyes removal.

Bimetallic nanoparticles (NPs) are considered superior in terms of stability and function with respect to its monometallic counterparts. Hence, in the present study Hibiscus rosa-sinensis flower extract was used to synthesis copper-iron bimetallic nanoparticles (HF-FCNPs). HF-FCNPs was characterized and its applications (biological and environmental) were determined. HF-FCNPs were spherical in shape with high percentage of copper inducted into the NPs. HF-FCNPs inhibited mammalian glucosidases [maltase (IC50: 548.71 ± 61.01 µg/mL), sucrase (IC50: 441.34 ± 36.03 µg/mL), isomaltase (IC50: 466.37 ± 27.09 µg/mL) and glucoamylase (IC50: 403.12 ± 14.03 µg/mL)], alpha-amylase (IC50: 16.27 ± 1.73 µg/mL) and acetylcholinesterase [AChE (IC50: 0.032 ± 0.004 µg/mL)] activities. HF-FCNPs showed competitive inhibition against AChE, maltase and sucrase activities; mixed inhibition against isomaltase and glucoamylase activities; whereas non-competitive inhibition against α-amylase activity. HF-FCNPs showed zone of inhibition of 16 ± 2 mm against S. mutans at 100 µg/mL concentration. HF-FCNPs inhibited biofilm formation of dental pathogen, S. mutans. SEM and confocal microscopy analysis revealed the disruption of network formation and bacterial cell death induced by HF-FCNPs treatment on tooth model of S. mutans biofilm. HF-FCNPs efficiently removed hexavalent chromium in pH-independent manner and followed first order kinetics. Through Langmuir isotherm fit the qmax (maximum adsorption capacity) was determined to be 62.5 mg/g. Further, HF-FCNPs removed both anionic and cationic dyes. Altogether, facile synthesis of HF-FCNPs was accomplished and its biological (enzyme inhibition and antibiofilm activity) and environmental (catalyst to remove pollutants) applications have been understood.

Antioxidant, antibacterial, and molecular docking of methyl ferulate and oleic acid produced by Aspergillus pseudodeflectus AUMC 15761 utilizing wheat bran.

Secondary metabolites (SMs) are the primary source of therapeutics and lead chemicals in medicine. They have been especially important in the creation of effective cures for conditions such as cancer, malaria, bacterial and fungal infections, neurological and cardiovascular problems, and autoimmune illnesses. In the present study, Aspergillus pseudodeflectus AUMC 15761 was demonstrated to use wheat bran in solid state fermentation (SSF) at optimum conditions (pH 7.0 at 30 °C after 10 days of incubation and using sodium nitrate as a nitrogen source) to produce methyl ferulate and oleic acid with significant antioxidant and antibacterial properties. Gas chromatography-mass spectrometry (GC-MS) analysis of the crude methanol extract revealed eleven peaks that indicated the most common chemical components. Purification of methyl ferulate and oleic acid was carried out by column chromatography, and both compounds were identified by in-depth spectroscopic analysis, including 1D and 2D NMR and HR-ESI-MS. DPPH activity increased as the sample concentration increased. IC50 values of both compounds obtained were 73.213 ± 11.20 and 104.178 ± 9.53 µM, respectively. Also, the MIC value for methyl ferulate against Bacillus subtilis and Staphylococcus aureus was 0.31 mg/mL, while the corresponding MIC values for oleic acid were 1.25 mg/mL and 0.62 mg/mL for both bacterial strains, respectively. Molecular modeling calculations were carried out to reveal the binding mode of methyl ferulate and oleic acid within the binding site of the crucial proteins of Staphylococcus aureus. The docking results were found to be well correlated with the experimental data.

Exploring the interaction of phytochemicals from Hibiscus rosa-sinensis flowers with glucosidase and acetylcholinesterase: An integrated in vitro and in silico approach.

Targeting multiple factors such as oxidative stress, alpha glucosidase and acetylcholinesterase (AChE) are considered advantageous for the treatment of diabetes and diabetes associated-cognitive dysfunction. In the present study, Hibiscus rosa-sinensis flowers anthocyanin-rich extract (HRA) was prepared. Phytochemical analysis of HRA using LC-ESI/MS/MS revealed the presence of various phenolic acids, flavonoids and anthocyanins. HRA showed in vitro antioxidant activity at low concentrations. HRA inhibited all the activities of mammalian glucosidases and AChE activity. The IC50 value of HRA for the inhibition of maltase, sucrase, isomaltase, glucoamylase and AChE was found to be 308.02 ± 34.25 µg/ml, 287.8 ± 19.49 µg/ml, 424.58 ± 34.75 µg/ml, 408.94 ± 64.82 µg/ml and 264.13 ± 30.84 µg/ml, respectively. Kinetic analysis revealed mixed-type inhibition against all the activities except for glucoamylase (competitive) activity. In silico analysis confirmed the interaction of two active constituents cyanidin 3-sophoroside (CS) and quercetin 3-O-sophoroside (QS) with four subunits, n-terminal and c-terminal subunits of human maltase-glucoamylase and sucrase-isomaltase as well as with AChE. Molecular dynamics simulation, binding free energy calculation, DCCM, PCA, PCA-based free energy surface analysis ascertained the stable binding of CS and QS with target proteins studied. HRA could be used as complementary therapy for diabetes and cognitive improvement.

Biosynthesis cobalt-doped nickel nanoparticles and their toxicity against disease.

The nanostructures have the great potential for novel medical and drug delivery applications. In present paper a green approach for the preparation of pure nickel oxide (NiO) and 5% cobalt-doped NiO (Co╫NiO) nanoparticles (NPs) by using Prosopis fracta extract have been study. The product of Co╫NiO NPs was proved through the PXRD, Raman, UV-Vis, FESEM, and EDX analyses. The results of XRD, EDX, and UV-Visible spectra displayed well doped cobalt in NiO NP. The particle sizes of Co╫NiO NPs were observed to be about 80 nm. The MTT test results for the cytotoxicity of Co╫NiO NPs on breast cancer cells (MCF-7) affirmed the stronger impact of doped NiO-NPs on cancer cells compared to NiO NPs. Thus, it is indicated that the doping process on NiO NPs caused an increase in its inhibitory effect against MCF-7 cells. RESEARCH HIGHLIGHTS: Cobalt-doped NiO nanoparticles were prepared using ecofriendly synthesis method and their cytotoxicity studied against MCF-7 cells.

Application of Response Surface Methodology (RSM) in the statistical evaluation of biodiesel production from the neutral lipids of the Coelastrella-Nannochloropsis consortium.

The paramount challenge in economically workable microalgal biodiesel production is the selection of a competent catalyst to improve the fatty acid methyl ester yield with desirable fatty acid composition. Though countless researchers have explored different homogeneous and heterogeneous catalysts to improve the transesterification efficacy, achieving greater biodiesel production from the neutral lipids of the microalgal consortium using a statistical tool, response surface methodology is scarce. Thus, the present study applied Response surface methodology to statistically analyze the biodiesel production from the neutral lipids of the indigenous Coelastrella-Nannochloropsis consortium (CNC) on the way to commercial feasibility. Onset of the study, the neutral lipids and acid value of the CNC were determined to be 18.74% and 2.73%, respectively. The transesterification of the neutral lipids of CNC was optimized through the coded factors in the RSM for various reaction parameters as combined influence viz., (i) Catalyst dose: methanol volume, (ii) Catalyst dose: reaction time; (iii) Catalyst dose: reaction temperature, (iv) Time: temperature, (v) time: methanol volume, (vi) temperature: methanol volume. Based on the ANOVA, coefficient determination, 2% KOH, 2 h time, 70 °C temperature, and 9 mL methanol volume were ascertained to be optimal values to accomplish 92% biodiesel production. Further, the biodiesel has desirable palmitic, palmitoleic, stearic, oleic, linoleic, and linolenic acids, with palmitic acid as the prevalent fatty acid contributing 16-18%. In addition, the tested fuel properties of CNC biodiesel satisfy international biodiesel standards.

Improving Tannery Wastewater Treatments Using an Additional Microbial Treatment with a Bacterial-Fungal Consortium.

Environmental pollutants such as toxic heavy metals and oxygen-demanding solids are generated by leather manufacturing. In most tanneries, wastewaters are treated with physico-chemical methods but overly high levels of pollutants remain in surface waters. The efficiency of tanning wastewater treatment with conventional techniques was evaluated in four tanneries in Saudi Arabia. It was observed that the wastewaters contained high amounts of pollutants, needing further treatment. We isolated microorganisms from the wastewaters and carried out experiments to treat the effluents with different bacteria, fungi, and their consortia. We hypothesized that a consortium of microorganisms is more efficient than the single microorganisms in the consortium. The efficiency of five single bacterial and five fungal species from different genera was tested. In a consortium experiment, the efficiency of nine bacterial-fungal consortia was studied. The bacterium Corynebacterium glutamicum and the fungus Acremonium sp. were the most efficient in the single-microbe treatment. In the consortium treatment, the consortium of these two was the most efficient at treating the effluent. The factory wastewater treatment reduced total dissolved solids (TDS) from 1885 mg/L to 880 mg/L. C. glutamicum treatment reduced TDS to 150 mg/L and Acremonium sp. to 140 mg/L. The consortium of these two reduced TDS further to 80 mg/L. Moreover, the factory treatment reduced BOD from 943 mg/L to 440 mg/L, C. glutamicum to 75 mg/L, and Acremonium sp. 70 mg/L. The consortium reduced BOD further to 20 mg/L. The total heavy-metal concentration (Cd, Cr, Cu, Mn, and Pb) was reduced by the factory treatment from 43 µg/L to 26 µg/L and by the consortium to 0.2 µg/L. The collagen concentration that was studied using hydroxyproline assay decreased from 120 mg/L to 39 mg/L. It was shown that the consortium of the bacterium C. glutamicum and the fungus Acremonium sp. was more efficient in reducing the pollutants than the single species. The consortium reduced almost all parameters to below the environmental regulation limit for wastewater discharge to the environment in Saudi Arabia. The consortium should be studied further as an additional treatment to the existing conventional tannery wastewater treatments.

Taxonomic and molecular characterization of a new entomopathogenic nematode species, Heterorhabditis casmirica n. sp., and whole genome sequencing of its associated bacterial symbiont.

BACKGROUND: Nematodes of the genus Heterorhabditis are important biocontrol agents as they form a lethal combination with their symbiotic Photorhabdus bacteria against agricultural insect pests. This study describes a new species of Heterorhabditis. METHODS: Six Heterorhabditis nematode populations were recovered from agricultural soils in Jammu and Kashmir, India. An initial examination using mitochondrial and nuclear genes showed that they belong to a new species. To describe this new species, a variety of analyses were conducted, including reconstructing phylogenetic relationships based on multiple genes, characterizing the nematodes at the morphological and morphometric levels, performing self-crossing and cross-hybridization experiments, and isolating and characterizing their symbiotic bacteria. RESULTS: The newly discovered species, Heterorhabditis casmirica n. sp., shares 94% mitochondrial cytochrome C oxidase subunit I gene (COI) sequence identity with Heterorhabditis bacteriophora and Heterorhabditis ruandica, and 93% with Heterorhabditis zacatecana. Morphologically, it differs from H. bacteriophora in its infective juvenile phasmids (present vs. inconspicuous) and bacterial pouch visibility in the ventricular portion of the intestine (invisible vs. visible); genital papilla 1 (GP1) position (at manubrium level vs. more anterior), and in its b ratio (body length/neck length), c ratio (tail length/bulb width), and D% [(excretory pore/neck length) × 100]. Other morphological differences include anterior end to the nerve ring distance (77-100 vs. 121-130 µm), V% [(anterior end of vulva/body length) × 100] (46-57 vs. 41-47) in hermaphroditic females; rectum size (slightly longer than the anal body diameter vs. about three times longer), phasmids (smaller vs. inconspicuous), body length (0.13-2.0 vs. 0.32-0.39 mm), body diameter (73-150 vs. 160-220 µm), anterior end to the excretory pore distance (135-157 vs. 174-214 µm), and demanian ratios in amphimictic females. Morphological differences with H. ruandica and H. zacatecana were also observed. Furthermore, H. casmirica n. sp. did not mate or produce fertile progeny with other Heterorhabditis nematodes reported from India. It was also discovered that H. casmirica n. sp. is associated with Photorhabdus luminescence subsp. clarkei symbiotic bacteria. CONCLUSIONS: The discovery of H. casmirica n. sp. provides novel insights into the diversity and evolution of Heterorhabditis nematodes and their symbiotic bacteria. This new species adds to the catalog of entomopathogenic nematodes in India.

Plant extract-mediated synthesis Cobalt doping in zinc oxide nanoparticles and their in vitro cytotoxicity and antibacterial performance.

In this research, zinc oxide (ZnO) nanoparticles doped with different percentages of produced cobalt using the green synthesis method. ZnO nanoparticles showed good cellular and microbial toxicity due to their high surface-to-volume ratio. Adding cobalt metal to the nanostructure can lead to the appearance of a new feature. To investigate the effect of adding cobalt metal, synthesized ZnO nanoparticles containing 3 and 6% cobalt were synthesized using plant extract. The resulting nanostructures were characterized by a Raman spectroscopy, UV-Visible spectrometer, X-ray diffraction, and Field emission scanning electron microscopy. Ultimately, the synthesized samples' cytotoxicity and antimicrobial tests were performed. XRD confirmed the formation of a hexagonal wurtzite ZnO structure. XRD and electron imaging showed that doping resulted in a decrease in average crystal size. The results showed that with cobalt doping, the particle size decreased slightly. The cytotoxicity and antimicrobial effects results showed that in all three studies, cobalt doping leads to an increase in the toxicity of this nanostructure compared to non-doped nanoparticles.

Bubble column photobioreactor (BCPR) for cultivating microalgae and microalgal consortium (Co-CC) with additional CO2 supply for enhancing biomass, lipid, and preferable fatty acids production.

The present study has designed and developed a 5 L bubble column photobioreactor (BCPR) to investigate two microalgal strains Chlorella sp. S-01, Chlorella sp. S-02 and their consortium Co-CC (Chlorella sp. S-01 + Chlorella sp. S-02) at 0.03, 5, and 10% CO2 supply for biomass and lipid production. The dry cell weight of Chlorella sp. S-01, Chlorella sp. S-02 and Co-CC were, respectively about 1.41, 1.32, and 1.39 g/L on the 20th day without CO2 supply, while it was 1.76, 1.61, and 1.87 g/L, respectively at 10% CO2 supply and similarly, chlorophyll-a content was higher in 10% CO2 supplied condition over control. Interestingly, Co-CC grown at all the CO2 concentrations showed similar lipid content between 19.30 and 1F9.41%. As an integrated refinery approach, de-oiled biomass of Co-CC was subjected to carbohydrates and protein estimation and found that 46.2% and 30.80% in 10% CO2 supply condition in BCPR. Lipid extracted from the Co-CC grown under 0.03, 5, and 10% CO2 supply in 5L BCPR was converted to biodiesel, and the biodiesel yield was estimated to be 62.78%. Further, the fatty acid profile of Co-CC grown at 10% CO2 showed higher levels of C16:0, C16:1, C18:1, and monounsaturated fatty acids contents over other CO2 supplied conditions. Biodiesel of Co-CC showed favourable fuel properties such as density, higher heating value, oxidative stability, CFPP, viscosity, degree of unsaturation, saponification value, and cetane number, which were also in accordance with ASTM, and EN, biodiesel standards.

Corrigendum: From soil to plant: strengthening carrot defenses against Meloidogyne incognita with vermicompost and arbuscular mycorrhizal fungi biofertilizers.

[This corrects the article DOI: 10.3389/fmicb.2023.1206217.].

Influence of silicon nano-particles on Avena sativa L. to alleviate the biotic stress of Rhizoctonia solani.

Avena sativa L. a cereal crop that is badly affected by several abiotic and biotic stresses. In the current study, silicon nanoparticles are used to mitigate the harmful effects of root rot disease caused by Rhizoctonia solani Kuhn on the growth of A. sativa. In vitro (Petri plates) and in vivo (pots experiment) were performed to measure the various physiological and biochemical parameters i.e. osmotic potential, chlorophyll, proline content, growth parameters, sugar, fresh and dry weight, and disease index. Results revealed that physiological and biochemical parameters were reduced under fungal stress with silicon nanoparticles treatment as compared to the control group. Si nanoparticles helped to alleviate the negative effects caused by fungus i.e. germination percentage upto 80%, germination rate 4 n/d, radical and plumule length was 4.02 and 5.46, dry weight 0.08 g, and relative water content was (50.3%) increased. Fungus + Si treatment showed the maximum protein content, i.e. 1.2 µg/g as compared to Fungus (0.3 µg/g) treated group. The DI was maximum (78.82%) when the fungus directly attacked the target plant and DI reduced (44.2%) when the fungus was treated with Si nanoparticles. Thus, silicon nanoparticles were potentially effective against the stress of R. solani and also used to analyze the plant resistance against fungal diseases. These particles can use as silicon fertilizers, but further studies on their efficacy under field conditions and improvement in their synthesis are still needed.

Unveiling the bioactive potential of Pimpinella anisum L. leaf extracts: Chromatographic profiling, antimicrobial efficiency, and cytotoxicity analysis.

In various countries, Pimpinella has been used to cure several diseases for centuries. Therefore, we focus on one of its potent species in this research. The aim of this experimental study was to document the various extracts derived from Pimpinella anisum that can effectively eradicate oral pathogens. In addition, the presence of antioxidants, antimicrobials, and cytotoxicity was determined using chromatographic testing methods. The alkaloid range was from 22.34 ± 043 mg/g, and the saponin range was from 15.1 ± 1.07 mg/g. HPLC analysis showed that the samples contained eight identified phenolic compounds. The antibacterial activity of ethanolic extract exhibited the highest inhibition region against Streptococcus iniae (43 ± 0.6 mm) and the lowest inhibition region against Staphylococcus haemolyticus (19 ± 0.2 mm) in 200 mg/mL of leaf ethanolic extracts. The antifungal activity revealed that ethanol showed the maximum inhibition zone against Aspergillus luchuensis (42.5 ± 0.19 mm) and the minimum inhibition zone against Aspergillus kawachii (15 ± 0.13 mm) in 200 mg/mL. The current study suggested that, after the isolation of individual components, P. anisum be investigated for assessing biological activity. The mixture and various combinations of these compounds may indicate a truly potent agent that is novel in its ability to combat a wide range of bacteria and oral pathogens.

Evaluation of microplastic pollution in a lotic ecosystem and its ecological risk.

This study investigates the microplastics (MPs) pollution in Tigris River, assessing spatial and temporal variations in water and sediment. MPs presence was high during both seasons 3429.2 MPs/m3 (dry season) and 3363.2 MPs/m3 (wet season) in water, and 121.2 MPs/kg (wet season) and 123.2 MPs/kg (dry season) in sediment. MPs morphology mostly consisted of fibers and fragments, with sizes below 0.5 mm. Transparent and white were the most common colors, and they were primarily composed of polyethylene (PE) and polypropylene (PP). Ecological risk assessment, using the plastic hazard index (PHI), pollution load index (PLI), and potential ecological risk index (PERI), categorized the risk from danger to extreme danger based on PHI, while PLI and PERI indicated a minor risk. These findings provide initial evidence of microplastics pollution in the Tigris River's water and sediment, emphasizing the need for action by decision-makers to mitigate these risks.

Advancements of microalgal upstream technologies: Bioengineering and application aspects in the paradigm of circular bioeconomy.

Sustainable energy transition has brought the attention towards microalgae utilization as potential feedstock due to its tremendous capabilities over its predecessors for generating more energy with reduced carbon footprint. However, the commercialization of microalgae feedstock remains debatable due to the various factors and considerations taken into scaling-up the conventional microalgal upstream processes. This review provides a state-of-the-art assessment over the recent developments of available and existing microalgal upstream cultivation systems catered for maximum biomass production. The key growth parameters and main cultivation modes necessary for optimized microalgal growth conditions along with the fundamental aspects were also reviewed and evaluated comprehensively. In addition, the advancements and strategies towards potential scale-up of the microalgal cultivation technologies were highlighted to provide insights for further development into the upstream processes aimed at sustainable circular bioeconomy.

The hidden world of fish fungal pathogens: molecular identification and phylogenetic analysis in common carp, Cyprinus carpio.

Fungal infections pose a significant threat to aquaculture, causing substantial economic losses and ecological disruptions. The common carp (Cyprinus carpio), as a crucial farmed fish, requires in-depth research to uncover the underlying fungal pathogens affecting its health. In this study, we analyzed 150 samples of C. carpio to identify the fungal pathogens responsible for the infections based on clinical signs and symptoms. Further, we assessed fungal diversity and prevalence in the infected fish. The infected fish exhibited varying degrees of gross pathogenicity, with fins and skin heavily affected, intermediate infection observed in the head and gills, and the least infection found in the operculum. Morphological examination revealed distinct characteristics such as necrosis, lesions on the skin, fins, and gills, as well as loss of scales, hemorrhagic lesions, and red spots. Furthermore, the presence of gray and white cottony patches on the body confirmed ascomycete and zygomycete infections, while a dark white cottony mass indicated phycomycete infection. Some fish exhibited severe fungal infections, presenting prominently curved spines and necrosis with red spots on the skin. These isolates belonged to various fungal groups, including ascomycetes, zygomycetes, phycomycetes, deuteromycetes, and basidiomycetes. Among these, Fusarium oxysporum emerged as the most prevalent fungal pathogen, followed by Fusarium solani, Saprolegnia delica, and Saprolegnia parasitica. Molecular identification based on ITS and LSU rRNA sequences confirmed the presence of Saprolegnia delica, Mucor hiemalis, Coniothyrium telephii, Rhodotorula mucilaginosa, Penicillium cellarum, and Fusarium californicum in the fish samples. Phylogenetic analysis further supported the morphological and molecular data, providing insights into the relationship between the isolated fungal strains and known species from various geographical regions. Our study enhances our understanding of the diversity and prevalence of fish fungal pathogens in common carp, emphasizing the significance of employing molecular techniques for accurate identification. These comprehensive findings offer essential insights into the impact of fungal infections on common carp populations, laying the groundwork for targeted control measures to mitigate their effects on global aquaculture.