Flexible, Polarization-Diverse UWB Antennas for Implantable Neural Recording Systems.

Implanted antennas for implant-to-air data communications must be composed of material compatible with biological tissues. We design single and dual-polarization antennas for wireless ultra-wideband neural recording systems using an inhomogeneous multi-layer model of the human head. Antennas made from flexible materials are more easily adapted to implantation; we investigate both flexible and rigid materials and examine performance trade-offs. The proposed antennas are designed to operate in a frequency range of 2-11 GHz (having S11 below -10 dB) covering both the 2.45 GHz (ISM) band and the 3.1-10.6 GHz UWB band. Measurements confirm simulation results showing flexible antennas have little performance degradation due to bending effects (in terms of impedance matching). Our miniaturized flexible antennas are 12 mm×12 mm and 10 mm×9 mm for single- and dual-polarizations, respectively. Finally, a comparison is made of four implantable antennas covering the 2-11 GHz range: 1) rigid, single polarization, 2) rigid, dual polarization, 3) flexible, single polarization and 4) flexible, dual polarization. In all cases a rigid antenna is used outside the body, with an appropriate polarization. Several advantages were confirmed for dual polarization antennas: 1) smaller size, 2) lower sensitivity to angular misalignments, and 3) higher fidelity.

A Wireless Optogenetic Headstage with Multichannel Electrophysiological Recording Capability.

We present a small and lightweight fully wireless optogenetic headstage capable of optical neural stimulation and electrophysiological recording. The headstage is suitable for conducting experiments with small transgenic rodents, and features two implantable fiber-coupled light-emitting diode (LED) and two electrophysiological recording channels. This system is powered by a small lithium-ion battery and is entirely built using low-cost commercial off-the-shelf components for better flexibility, reduced development time and lower cost. Light stimulation uses customizable stimulation patterns of varying frequency and duty cycle. The optical power that is sourced from the LED is delivered to target light-sensitive neurons using implantable optical fibers, which provide a measured optical power density of 70 mW/mm² at the tip. The headstage is using a novel foldable rigid-flex printed circuit board design, which results into a lightweight and compact device. Recording experiments performed in the cerebral cortex of transgenic ChR2 mice under anesthetized conditions show that the proposed headstage can trigger neuronal activity using optical stimulation, while recording microvolt amplitude electrophysiological signals.

A wireless and batteryless neural headstage with optical stimulation and electrophysiological recording.

This paper presents a miniature Optogenetics headstage for wirelessly stimulating the brain of rodents with an implanted LED while recording electrophysiological data from a two-channel custom readout. The headstage is powered wirelessly using an inductive link, and is built using inexpensive commercial off-the-shelf electronic components, including a RF microcontroller and a printed antenna. This device has the capability to drive one light-stimulating LED and, at the same time, capture and send back neural signals recorded from two microelectrode readout channels. Light stimulation uses flexible patterns that allow for easy tuning of light intensity and stimulation periods. For driving the LED, a low-pass filtered digitally-generated PWM signal is employed for providing a flexible pulse generation method that alleviates the need for D/A converters. The proposed device can be powered wirelessly into an animal chamber using inductive energy transfer, which enables compact, light-weight and cost-effective smart animal research systems. The device dimensions are 15×25×17 mm; it weighs 7.4 grams and has a data transmission range of more than 2 meters. Different types of LEDs with different power consumptions can be used for this system. The power consumption of the system without the LED is 94.52 mW.