The local mechanosensitive response of primary cardiac fibroblasts is influenced by the microenvironment mechanics.

Cardiac fibroblasts (CFs) are essential for preserving myocardial integrity and function. They can detect variations in cardiac tissue stiffness using various cellular mechanosensors, including the Ca2+ permeable mechanosensitive channel Piezo1. Nevertheless, how CFs adapt the mechanosensitive response to stiffness changes remains unclear. In this work we adopted a multimodal approach, combining the local mechanical stimulation (from 10 pN to 350 nN) with variations of culture substrate stiffness. We found that primary rat CFs cultured on stiff (GPa) substrates showed a broad Piezo1 distribution in the cell with particular accumulation at the mitochondria membrane. CFs displayed a force-dependent behavior in both calcium uptake and channel activation probability, showing a threshold at 300 nN, which involves both cytosolic and mitochondrial Ca2+ mobilization. This trend decreases as the myofibroblast phenotype within the cell population increases, following a possible Piezo1 accumulation at focal adhesion sites. In contrast, the inhibition of fibroblasts to myofibroblasts transition with soft substrates (kPa) considerably reduces both mechanically- and chemically-induced Piezo1 activation and expression. Our findings shed light on how Piezo1 function and expression are regulated by the substrate stiffness and highlight its involvement in the environment-mediated modulation of CFs mechanosensitivity.

Investigations of cardiac fibrosis rheology by in vitro cardiac tissue modeling with 3D cellular spheroids.

Cardiac fibrosis refers to the abnormal accumulation of extracellular matrix within the cardiac muscle, leading to increased stiffness and impaired heart function. From a rheological standpoint, knowledge about myocardial behavior is still lacking, partially due to a lack of appropriate techniques to investigate the rheology of in vitro cardiac tissue models. 3D multicellular cardiac spheroids are powerful and versatile platforms for modeling healthy and fibrotic cardiac tissue in vitro and studying how their mechanical properties are modulated. In this study, cardiac spheroids were created by co-culturing neonatal rat ventricular cardiomyocytes and fibroblasts in definite ratios using the hanging-drop method. The rheological characterization of such models was performed by Atomic Force Microscopy-based stress-relaxation measurements on the whole spheroid. After strain application, a viscoelastic bi-exponential relaxation was observed, characterized by a fast relaxation time (τ1) followed by a slower one (τ2). In particular, spheroids with higher fibroblasts density showed reduction for both relaxation times comparing to control, with a more pronounced decrement of τ1 with respect to τ2. Such response was found compatible with the increased production of extracellular matrix within these spheroids, which recapitulates the main feature of the fibrosis pathophysiology. These results demonstrate how the rheological characteristics of cardiac tissue vary as a function of cellular composition and extracellular matrix, confirming the suitability of such system as an in vitro preclinical model of cardiac fibrosis.

Flagellar beating forces of human spermatozoa with different motility behaviors.

BACKGROUND: One of the causes of male infertility is associated with altered spermatozoa motility. These sperm features are frequently analyzed by image-based approaches, which, despite allowing the acquisition of crucial parameters to assess sperm motility, they are unable to provide details regarding the flagellar beating forces, which have been neglected until now. RESULTS: In this work we exploit Fluidic Force Microscopy to investigate and quantify the forces associated with the flagellar beating frequencies of human spermatozoa. The analysis is performed on two groups divided according to the progressive motility of semen samples, as identified by standard clinical protocols. In the first group, 100% of the spermatozoa swim linearly (100% progressive motility), while, in the other, spermatozoa show both linear and circular motility (identified as 80 - 20% progressive motility). Significant differences in flagellar beating forces between spermatozoa from semen sample with different progressive motility are observed. Particularly, linear motile spermatozoa exhibit forces higher than those with a circular movement. CONCLUSIONS: This research can increase our understanding of sperm motility and the role of mechanics in fertilization, which could help us unveil some of the causes of idiopathic male infertility.

X-rays induced alterations in mechanical and biochemical properties of isolated SH-SY5Y nuclei.

BACKGROUND: The use of ionizing radiations in radiotherapy is an effective and very common cancer treatment after surgery. Although ionizing-radiation DNA damages are extensively investigated, little is known about their effects on the other nuclear components, since their variations when studied in whole cells can be difficult to decouple from those of the cytoplasmatic structures. The organization of nuclear components plays a functional role since they are directly involved in some of the nuclear response to chemical or physical stimuli. For this reason, studying the X-ray effects on nuclear components is a crucial step in radiobiology. MATERIALS AND METHODS: We have used Atomic Force Microscopy (AFM) and micro-FTIR to examine the biomechanical and biochemical properties of hydrated fixed nuclei isolated from neuroblastoma (SH-SY5Y) cells irradiated by 2, 4, 6 and 8 Gy X-ray doses. RESULTS: The experimental results have shown that, already at 2 Gy irradiation dose, the nuclei exhibit not only a DNA damage, but also relevant alterations of lipid saturation, protein secondary structure arrangement and a significant decrease in nuclear stiffness, which indicate a remarkable chromatin decondensation. CONCLUSIONS AND GENERAL SIGNIFICANCE: The present work demonstrates that a multi-technique approach, able to disclose multiple features, can be helpful to achieve a comprehensive picture of the X-ray irradiation effects of the nuclear components and distinguish them from those occurring at the level of cytoplasm.

Investigation on the change of spermatozoa flagellar beating forces before and after capacitation.

The swimming forces exerted by mammalian spermatozoa during the pathway to the ovary and during the interaction with the oocyte are thought to play a fundamental role in the fertilization of the egg. In particular, a process named capacitation is of key relevance for its success. Capacitation enables spermatozoa to undergo the acrosome reaction and to exhibit different motility called hyperactivation with a change in the sperm cell tail motion from symmetric to a more asymmetric beating, characterized by wider flagellar bending at lower frequencies. Despite several studies about the mechanism that underlies capacitation, no quantitative information is available about the forces associated with sperm motility. Sperm cell motility has been widely studied with digital imaging tools and video microscopy, but these methodologies cannot provide information about the forces exerted by spermatozoa during the motion and the contribution of every single frequency of flagellar beating to the sperm cell movement. For this purpose, fluidic force microscopy was used to trap single swimming spermatozoa allowing to evaluate these parameters. We observe significant differences between capacitated and non-capacitated spermatozoa in terms of force exerted and beating frequencies. The description of the dynamics of this process is of great interest in the field of reproductive medicine. Such information could be useful to clarify unknown causes of male infertility or for the development of novel methods to assess the quality of semen samples.

Half-wet nanomechanical sensors for cellular dynamics investigations.

Testing devices based on cell tracking are particularly interesting as diagnostic tools in medicine for antibiotics susceptibility testing and in vitro chemotherapeutic screening. In this framework, the application of nanomechanical sensors has attracted much attention, although some crucial aspects such as the effects of the viscous damping, when operating in physiological conditions environment, still need to be properly solved. To address this problem, we have designed and fabricated a nanomechanical force sensor that operates at the interface between liquid and air. Our sensor consists of a silicon chip including a 500 µm wide Si3N4 suspended membrane where three rectangular silicon nitride cantilevers are defined by a lithographically etched gap. The cantilevers can be operated in air, fully immersed in a liquid environment and in half wetting condition, with one side in contact with the solution and the opposite one in air. The formation of a water meniscus in the gap prevents the leakage of medium to the opposite side, which remained dry and is used to reflect a laser to measure the cantilever deflection. This configuration enables to keep the cells in physiological environment while operating the sensor in dry conditions. The performance of the sensor has been applied to monitor the motion and measures the forces developed by migrating breast cancer cell. The functionalization of one side of the cantilever and the use of a purposely designed chamber of measurements enable the confinement of the cell only on one side of the cantilever. Our data demonstrate that this approach can distinguish the adhesion and contraction forces developed by different cell lines and may represents valuable tool for a fast and quantitative in-vitro screening of new chemotherapeutic drugs targeting cancer cell adhesion and motility.

Water-Air Interface to Mimic In Vitro Tumoral Cell Migration in Complex Micro-Environments.

The long-known role of cell migration in physiological and pathological contexts still requires extensive research to be fully understood, mainly because of the intricate interaction between moving cells and their surroundings. While conventional assays fail to capture this complexity, recently developed 3D platforms better reproduce the cellular micro-environment, although often requiring expensive and time-consuming imaging approaches. To overcome these limitations, we developed a novel approach based on 2D micro-patterned substrates, compatible with conventional microscopy analysis and engineered to create micro-gaps with a length of 150 µm and a lateral size increasing from 2 to 8 µm, where a curved water-air interface is created on which cells can adhere, grow, and migrate. The resulting hydrophilic/hydrophobic interfaces, variable surface curvatures, spatial confinements, and size values mimic the complex micro-environment typical of the extracellular matrix in which aggressive cancer cells proliferate and migrate. The new approach was tested with two breast cancer cell lines with different invasive properties. We observed that invasive cells (MDA-MB-231) can align along the pattern and modify both their morphology and their migration rate according to the size of the water meniscus, while non-invasive cells (MCF-7) are only slightly respondent to the surrounding micro-environment. Moreover, the selected pattern highlighted a significative matrix deposition process connected to cell migration. Although requiring further optimizations, this approach represents a promising tool to investigate cell migration in complex environments.

Atomic force spectroscopy-based essay to evaluate oocyte postovulatory aging.

Postovulatory aging is a process occurring in the mature (MII) oocyte leading the unfertilized ones to apoptosis. The optimal time window of fertility for different mammalian species after oocytes maturation depends on its timeliness: the higher the time elapsed from the accomplishment of the MII stage, the lower are the chances of fertilization and of development of a viable embryo. In the in vitro fertilization, the selection of competent oocytes for intracytoplasmic sperm injection (ICSI) is mostly made by the visual inspection of the MII oocyte morphology, which does not allow to determine the oocyte postovulatory age. On the other hand, more specific tests usually involve some kind of staining, thus compromising the viability of the oocyte for reproductive purposes. Hence, the need of a noninvasive analysis of oocyte aging to improve the success rate of in vitro fertilization procedures. Here, we exploit atomic force microscopy to examine the evolution of the mechanical properties of mouse oocytes during in vitro postovulatory aging. Three hours before the occurrence of any visual morphological feature related to degradation, we observe a sudden change of the mechanical parameters: the elastic modulus doubles its initial value, while the viscosity decreases significantly. These mechanical variations are temporally correlated with the release of the cortical granules, investigated by fluorescence microscopy. Interestingly, the oocyte mechanics correlates as well with the yield of embryo formation, evaluated up to the blastocyst formation stage. These results demonstrate that minimally invasive mechanical measurements are very sensitive to the aging of the oocyte and can be used as a label-free method to detect the age of the postovulatory oocytes.

Advanced photodynamic therapy with an engineered M13 phage targeting EGFR: Mitochondrial localization and autophagy induction in ovarian cancer cell lines.

Photodynamic therapy (PDT) is a potential synergistic approach to chemotherapy for treating ovarian cancer, the most lethal gynecologic malignancy. Here we used M13 bacteriophage as a targeted vector for the efficient photodynamic killing of SKOV3 and COV362 cells. The M13 phage was refactored (M13r) to display an EGFR binding peptide in its tip that is frequently overexpressed in ovarian cancer. The refactored phage was conjugated with chlorin e6 (Ce6), one of the most widely used photosensitizers (M13r-Ce6). The new platform, upon irradiation, generated ROS by type I mechanism and showed activity in killing SKOV3 and COV362 cells even at concentrations in which Ce6 alone was ineffective. A microscopy analysis demonstrated an enhanced cellular uptake of M13r-Ce6 compared to free Ce6 and its mitochondrial localization. Western blot analysis revealed significant downregulation in the expression of EGFR in cells exposed to M13r-Ce6 after PDT. Following PDT treatment, autophagy induction was supported by an increased expression of LC3II, along with a raised autophagic fluorescent signal, as observed by fluorescence microscopy analysis for autophagosome visualization. As a conclusion we have herein proposed a bacteriophage-based receptor targeted photodynamic therapy for EGFR-positive ovarian cancer.

Scanning Probe Microscopies: Imaging and Biomechanics in Reproductive Medicine Research.

Basic and translational research in reproductive medicine can provide new insights with the application of scanning probe microscopies, such as atomic force microscopy (AFM) and scanning near-field optical microscopy (SNOM). These microscopies, which provide images with spatial resolution well beyond the optical resolution limit, enable users to achieve detailed descriptions of cell topography, inner cellular structure organization, and arrangements of single or cluster membrane proteins. A peculiar characteristic of AFM operating in force spectroscopy mode is its inherent ability to measure the interaction forces between single proteins or cells, and to quantify the mechanical properties (i.e., elasticity, viscoelasticity, and viscosity) of cells and tissues. The knowledge of the cell ultrastructure, the macromolecule organization, the protein dynamics, the investigation of biological interaction forces, and the quantification of biomechanical features can be essential clues for identifying the molecular mechanisms that govern responses in living cells. This review highlights the main findings achieved by the use of AFM and SNOM in assisted reproductive research, such as the description of gamete morphology; the quantification of mechanical properties of gametes; the role of forces in embryo development; the significance of investigating single-molecule interaction forces; the characterization of disorders of the reproductive system; and the visualization of molecular organization. New perspectives of analysis opened up by applying these techniques and the translational impacts on reproductive medicine are discussed.

Ultra-structural analysis of human spermatozoa by aperture scanning near-field optical microscopy.

Scanning near-field optical microscopy (SNOM) represents a potential candidate for investigation of ultrastructure in human spermatozoa. It is a noninvasive optical technique that offers two main advantages: minimal sample preparation and simultaneous topographical and optical images acquisition with a spatial resolution beyond the diffraction limit. This enables the combination of surface characterization and information from the inner cellular organization in a single acquisition providing an immediate and comprehensive analysis of the cellular portions. In this work spermatozoa are immobilized on poly-L-lysine coated coverslips, fixed according to a standard protocol and imaged by aperture-SNOM in air. In the SNOM images, all peculiar sperm portions show well-resolved optical features, which exhibit good similarities with the structures revealed in transmission electron microscopy images, as compared with literature data. The optical features of anomalous spermatozoa are clearly different as respect with those observed for healthy ones. This analysis reveals the potentialities of SNOM and opens to its application to high-resolution analysis of sperm morphological alterations, which might be relevant in reproductive medicine.

Knock Down of Plakophillin 2 Dysregulates Adhesion Pathway through Upregulation of miR200b and Alters the Mechanical Properties in Cardiac Cells.

Background: Mutations in genes encoding intercalated disk/desmosome proteins, such as plakophilin 2 (PKP2), cause arrhythmogenic cardiomyopathy (ACM). Desmosomes are responsible for myocyte-myocyte attachment and maintaining mechanical integrity of the myocardium. Methods: We knocked down Pkp2 in HL-1 mouse atrial cardiomyocytes (HL-1Pkp2-shRNA) and characterized their biomechanical properties. Gene expression was analyzed by RNA-Sequencing, microarray, and qPCR. Immunofluorescence was used to detect changes in cytoskeleton and focal adhesion. Antagomirs were used to knock down expression of selected microRNA (miR) in the rescue experiments. Results: Knockdown of Pkp2 was associated with decreased cardiomyocyte stiffness and work of detachment, and increased plasticity index. Altered mechanical properties were associated with impaired actin cytoskeleton in HL-1Pkp2-shRNA cells. Analysis of differentially expressed genes identified focal adhesion and actin cytoskeleton amongst the most dysregulated pathways, and miR200 family (a, b, and 429) as the most upregulated miRs in HL-1Pkp2-shRNA cells. Knockdown of miR-200b but not miR-200a, miR-429, by sequence-specific shRNAs partially rescued integrin-α1 (Itga1) levels, actin organization, cell adhesion (on collagen), and stiffness. Conclusions: PKP2 deficiency alters cardiomyocytes adhesion through a mechanism that involves upregulation of miR-200b and suppression of Itga1 expression. These findings provide new insights into the molecular basis of altered mechanosensing in ACM.

Study of the mechanical properties of fresh and cryopreserved individual human oocytes.

In assisted reproduction technologies, the cryopreservation of oocytes is a common procedure used to circumvent female infertility. However, some morphological and functional alterations of oocytes have been observed depending on the protocol applied. In this work, the mechanical response of individual human oocytes before and after a freeze-thawing procedure was characterised. Oocytes, immediately after retrieval, were morphologically evaluated by bright-field optical microscopy and their elasticity measured by indentation measurements using atomic force microscopy. Oocytes were then frozen according to the open-vitrification protocol and stored in liquid nitrogen. Afterwards, the same oocytes were thawed and the indentation measurements repeated. Using this approach, we can follow the elasticity of a set of single oocytes from retrieval up to the freeze-thawing procedure. The analysis of the resulting data shows that the retrieved healthy oocytes, which preserve their healthy morphological features after cryopreservation, maintain unchanged also in stiffness values. In contrast, oocytes having dysmorphic characteristics, before and/or after freeze-thawing, show significant variations in their mechanical response. In addition, the dysmorphic oocytes are generally observed to be softer than the healthy oocytes. Our results indicate that stiffness of healthy oocytes is not considerably affected by the open-vitrification-thawing procedure, and that distinct elasticity ranges can be identified for healthy and dysmorphic oocytes. These findings indicate that the mechanical characterization of oocytes represents an opportunity to detect cellular defects, and assess the quality and bio-viability of processes such as cryopreservation.

Planar AFM macro-probes to study the biomechanical properties of large cells and 3D cell spheroids.

The ability to measure mechanical response of cells under applied load is essential for developing more accurate models of cell mechanics and mechanotransduction. Living cells have been mechanically investigated by several approaches. Among them, atomic force microscopy (AFM) is widely used thanks to its high versatility and sensitivity. In the case of large cells or 3D multicellular aggregates, standard AFM probes may not be appropriate to investigate the mechanical properties of the whole biological system. Owing to their size, standard AFM probes can compress only a single somatic cell or part of it. To fill this gap, we have designed and fabricated planar AFM macro-probes compatible with commercial AFM instruments. The probes are constituted of a large flat compression plate, connected to the chip by two flexible arms, whose mechanical characteristics are tuned for specific biological applications. As proof of concept, we have used the macro-probes to measure the viscoelasticity of large spherical biological systems, which have a diameter above 100 µm: human oocytes and 3D cell spheroids. Compression experiments are combined with visual inspection, using a side-view configuration imaging, which allows us to monitor the sample morphology during the compression and to correlate it with the viscoelastic parameters. Our measurements provide a quantitative estimate of the relaxation times of such biological systems, which are discussed in relation to data present in literature. The broad applicability of the AFM macro-probes can be relevant to study the biomechanical features in any biological process involving large soft materials. STATEMENT OF SIGNIFICANCE: The understanding of the role of physical factors in defining cell and tissue functions requires to develop new methods or improve the existing ones to accurately measure the biomechanical properties. AFM is a sensitive and versatile tool to measure the mechanical features from single proteins to single cells. When cells or cell aggregates exceed few tens of microns, AFM suffers from limitations. On these biological systems the control of the contact area and the application of a precise uniform compression becomes crucial. A modification of the standard cantilevers fabrication allowed us obtaining AFM macro-probes, having large planar contact area and spring constant suitable for biological investigations. They were demonstrated valuable to characterize the mechanical properties of large hierarchical biological systems.

High aspect ratio silicon nanowires control fibroblast adhesion and cytoskeleton organization.

Cell-cell and cell-matrix interactions are essential to the survival and proliferation of most cells, and are responsible for triggering a wide range of biochemical pathways. More recently, the biomechanical role of those interactions was highlighted, showing, for instance, that adhesion forces are essential for cytoskeleton organization. Silicon nanowires (Si NWs) with their small size, high aspect ratio and anisotropic mechanical response represent a useful model to investigate the forces involved in the adhesion processes and their role in cellular development. In this work we explored and quantified, by single cell force spectroscopy (SCFS), the interaction of mouse embryonic fibroblasts with a flexible forest of Si NWs. We observed that the cell adhesion forces are comparable to those found on collagen and bare glass coverslip, analogously the membrane tether extraction forces are similar to that on collagen but stronger than that on bare flat glass. Cell survival did not depend significantly on the substrate, although a reduced proliferation after 36 h was observed. On the contrary both cell morphology and cytoskeleton organization revealed striking differences. The cell morphology on Si-NW was characterized by a large number of filopodia and a significant decrease of the cell mobility. The cytoskeleton organization was characterized by the absence of actin fibers, which were instead dominant on collagen and flat glass support. Such findings suggest that the mechanical properties of disordered Si NWs, and in particular their strong asymmetry, play a major role in the adhesion, morphology and cytoskeleton organization processes. Indeed, while adhesion measurements by SCFS provide out-of-plane forces values consistent with those measured on conventional substrates, weaker in-plane forces hinder proper cytoskeleton organization and migration processes.

Cubosomes for in vivo fluorescence lifetime imaging.

Herein we provided the first proof of principle for in vivo fluorescence optical imaging application using monoolein-based cubosomes in a healthy mouse animal model. This formulation, administered at a non-cytotoxic concentration, was capable of providing both exogenous contrast for NIR fluorescence imaging with very high efficiency and chemospecific information upon lifetime analysis. Time-resolved measurements of fluorescence after the intravenous injection of cubosomes revealed that the dye rapidly accumulated mainly in the liver, while lifetimes profiles obtained in vivo allowed for discriminating between free dye or dye embedded within the cubosome nanostructure after injection.

Acetylated tubulin is essential for touch sensation in mice.

At its most fundamental level, touch sensation requires the translation of mechanical energy into mechanosensitive ion channel opening, thereby generating electro-chemical signals. Our understanding of this process, especially how the cytoskeleton influences it, remains unknown. Here we demonstrate that mice lacking the α-tubulin acetyltransferase Atat1 in sensory neurons display profound deficits in their ability to detect mechanical stimuli. We show that all cutaneous afferent subtypes, including nociceptors have strongly reduced mechanosensitivity upon Atat1 deletion, and that consequently, mice are largely insensitive to mechanical touch and pain. We establish that this broad loss of mechanosensitivity is dependent upon the acetyltransferase activity of Atat1, which when absent leads to a decrease in cellular elasticity. By mimicking α-tubulin acetylation genetically, we show both cellular rigidity and mechanosensitivity can be restored in Atat1 deficient sensory neurons. Hence, our results indicate that by influencing cellular stiffness, α-tubulin acetylation sets the force required for touch.

Multimodal near-infrared-emitting PluS Silica nanoparticles with fluorescent, photoacoustic, and photothermal capabilities.

PURPOSE: The aim of the present study was to develop nanoprobes with theranostic features, including - at the same time - photoacoustic, near-infrared (NIR) optical imaging, and photothermal properties, in a versatile and stable core-shell silica-polyethylene glycol (PEG) nanoparticle architecture. MATERIALS AND METHODS: We synthesized core-shell silica-PEG nanoparticles by a one-pot direct micelles approach. Fluorescence emission and photoacoustic and photothermal properties were obtained at the same time by appropriate doping with triethoxysilane-derivatized cyanine 5.5 (Cy5.5) and cyanine 7 (Cy7) dyes. The performances of these nanoprobes were measured in vitro, using nanoparticle suspensions in phosphate-buffered saline and blood, dedicated phantoms, and after incubation with MDA-MB-231 cells. RESULTS: We obtained core-shell silica-PEG nanoparticles endowed with very high colloidal stability in water and in biological environment, with absorption and fluorescence emission in the NIR field. The presence of Cy5.5 and Cy7 dyes made it possible to reach a more reproducible and higher doping regime, producing fluorescence emission at a single excitation wavelength in two different channels, owing to the energy transfer processes within the nanoparticle. The nanoarchitecture and the presence of both Cy5.5 and Cy7 dyes provided a favorable agreement between fluorescence emission and quenching, to achieve optical imaging and photoacoustic and photothermal properties. CONCLUSION: We obtained rationally designed nanoparticles with outstanding stability in biological environment. At appropriate doping regimes, the presence of Cy5.5 and Cy7 dyes allowed us to tune fluorescence emission in the NIR for optical imaging and to exploit quenching processes for photoacoustic and photothermal capabilities. These nanostructures are promising in vivo theranostic tools for the near future.

Investigating the mechanical properties of zona pellucida of whole human oocytes by atomic force spectroscopy.

The role of mechanics in numerous biological processes is nowadays recognized, while in others, such as the fertilization process, it is still neglected. In the case of oocytes the description of their mechanical properties could improve the comprehension of the oocyte-spermatozoon interaction and be helpful for application in in vitro fertilization (IVF) clinics. Herein the mechanical properties of whole human oocytes (HOs) immediately after retrieval are investigated by indentation measurements with atomic force spectroscopy under physiological conditions. Measurements are performed on immature (metaphase I - MI) and mature (metaphase II - MII) HOs. According to their morphological characteristics MII-HOs are classified as "suitable" and "rejected"; these latter would be usually rejected for intracytoplasmic sperm injection (ICSI). For all maturation stages we observe that the elastic response of the zona pellucida (ZP) outer layer was different and distinguishable from the rest of the ZP-HO. The elasticity of this ZP outer layer varies with maturation and quality: stiffness decreases from immature MI to good quality MII, up to poor-quality rejected MII. An indirect analysis with IVF outcome indicates that the ZP outer layer of analysed HOs donated by women who achieved pregnancy is stiffer than that of HOs from women with negative outcome. Our findings suggest that mechanical properties can represent important oocyte quality indicators that may be exploited for the design of innovative ICSI dedicated cell sorters.

Membrane stiffening by STOML3 facilitates mechanosensation in sensory neurons.

Sensing force is crucial to maintain the viability of all living cells. Despite its fundamental importance, how force is sensed at the molecular level remains largely unknown. Here we show that stomatin-like protein-3 (STOML3) controls membrane mechanics by binding cholesterol and thus facilitates force transfer and tunes the sensitivity of mechano-gated channels, including Piezo channels. STOML3 is detected in cholesterol-rich lipid rafts. In mouse sensory neurons, depletion of cholesterol and deficiency of STOML3 similarly and interdependently attenuate mechanosensitivity while modulating membrane mechanics. In heterologous systems, intact STOML3 is required to maintain membrane mechanics to sensitize Piezo1 and Piezo2 channels. In C57BL/6N, but not STOML3(-/-) mice, tactile allodynia is attenuated by cholesterol depletion, suggesting that membrane stiffening by STOML3 is essential for mechanical sensitivity. Targeting the STOML3-cholesterol association might offer an alternative strategy for control of chronic pain.