Diastereomeric dinickel(II) complexes with non-innocent bis(octaazamacrocyclic) ligands: isomerization, spectroelectrochemistry, DFT calculations and use in catalytic oxidation of cyclohexane.

Diastereomeric dinickel(II) complexes with bis-octaazamacrocyclic 15-membered ligands [Ni(L1-3-L1-3)Ni] (4-6) have been prepared by oxidative dehydrogenation of nickel(II) complexes NiL1-3 (1-3) derived from 1,2- and 1,3-diketones and S-methylisothiocarbohydrazide. The compounds were characterized by elemental analysis, ESI mass spectrometry, and IR, UV-vis, 1H NMR, and 13C NMR spectroscopy. Single crystal X-ray diffraction (SC-XRD) confirmed the isolation of the anti and syn isomers of bis-octaazamacrocyclic dinickel(II) complexes 4a and 4s, the syn-configuration of 5s and the anti-configuration of the dinickel(II) complex 6a. Dimerization of prochiral nickel(II) complexes 1-3 generates two chiral centers at the bridging carbon atoms. The anti-complexes were isolated as meso-isomers (4a and 6a) and the syn-compounds as racemic mixtures of R,R/S,S-enantiomers (4s and 5s). The syn-anti isomerization (epimerization) of the isolated complexes in chloroform was disclosed. The isomerization kinetics of 5a was monitored at five different temperatures ranging from 20 °C to 50 °C by 1H NMR spectroscopy indicating the clean conversion of 5a into 5s. The activation barrier determined from the temperature dependence of the rate constants via the Eyring equation was found to be ΔH‡ = 114 ± 1 kJ mol-1 with activation entropy ΔS‡ = 13 ± 3 J K-1 mol-1. The complexes contain two low-spin nickel(II) ions in a square-planar coordination environment. The electrochemical behavior of 4a, 4s, 5s and 6a and the electronic structure of the oxidized species were studied by UV-vis-NIR-spectroelectrochemistry (SEC) and DFT calculations indicating the redox non-innocent behavior of the complexes. The dinickel(II) complexes 4a, 4s, 5s and 6a/6s were investigated as catalysts for microwave-assisted solvent-free oxidation of cyclohexane by tert-butyl hydroperoxide to produce a mixture of cyclohexanone and cyclohexanol (KA oil). The best value for KA oil yield (16%) was obtained with a mixture of 6a/6s after 2 h of microwave irradiation at 100 °C.

Oxido- and Dioxido-Vanadium(V) Complexes Supported on Carbon Materials: Reusable Catalysts for the Oxidation of Cyclohexane.

Oxidovanadium(V) and dioxidovanadium(V) compounds, [VO(OEt)L] (1) and [Et3NH][VO2L] (2), were synthesized using an aroylhydrazone Schiff base (5-bromo-2-hydroxybenzylidene)-2-hydroxybenzohydrazide (H2L). They were characterized by elemental analysis, Fourier-transform infrared spectroscopy (FT-IR), (1H and 51V) nuclear magnetic resonance (NMR), electrospray ionization mass spectrometry (ESI-MS) and single crystal X-ray diffraction analyses. Both complexes were immobilized on functionalized carbon nanotubes and activated carbon. The catalytic performances of 1 and 2, homogenous and anchored on the supports, were evaluated for the first time towards the MW-assisted peroxidative oxidation (with tert-butylhydroperoxide, TBHP) of cyclohexane under heterogeneous conditions. The immobilization of 1 and 2 on functionalized carbon materials improved the efficiency of catalytic oxidation and allowed the catalyst recyclability with a well-preserved catalytic activity.

Selective Styrene Oxidation to Benzaldehyde over Recently Developed Heterogeneous Catalysts.

The selective oxidation of styrene under heterogeneous catalyzed conditions delivers environmentally friendly paths for the production of benzaldehyde, an important intermediate for the synthesis of several products. The present review explores heterogeneous catalysts for styrene oxidation using a variety of metal catalysts over the last decade. The use of several classes of supports is discussed, including metal-organic frameworks, zeolites, carbon materials and silicas, among others. The studied catalytic systems propose as most used oxidants tert-butyl hydroperoxide, and hydrogen peroxide and mild reaction conditions. The reaction mechanism proceeds through the generation of an intermediate reactive metal-oxygen species by catalyst-oxidant interactions. Overall, most of the studies highlight the synergetic effects among the metal and support for the activity and selectivity enhancement.

New Trends in C-C Cross-Coupling Reactions: The Use of Unconventional Conditions.

The ever-growing interest in the cross-coupling reaction and its applications has increased exponentially in the last decade, owing to its efficiency and effectiveness. Transition metal-mediated cross-couplings reactions, such as Suzuki-Miyaura, Sonogashira, Heck, and others, are powerful tools for carbon-carbon bond formations and have become truly fundamental routes in catalysis, among other fields. Various greener strategies have emerged in recent years, given the widespread popularity of these important reactions. The present review comprises literature from 2015 onward covering the implementation of unconventional methodologies in carbon-carbon (C-C) cross-coupling reactions that embodies a variety of strategies, from the use of alternative energy sources to solvent- free and green media protocols.

Assessing the applicability of a new carob waste-derived powdered activated carbon to control pharmaceutical compounds in wastewater treatment.

This paper assesses the applicability of a new carob waste-derived powdered activated carbon (PAC) obtained by steam activation for pharmaceutical compounds (PhCs) removal in urban wastewater treatment plants (WWTPs) with activated sludge (AS) secondary treatment. The new carob-derived PAC presents chemical and textural properties similar to a high-performing commercial PAC produced from vegetable source by physical activation. The adsorption isotherms of three target PhCs, carbamazepine, diclofenac and sulfamethoxazole, spiked (at around 100 µg/L) in mixed liquor (ML) and in clarified-ML from the AS-bioreactor of a WWTP show: (i) minor reduction of PAC capacity with real MLs compared to clarified MLs; (ii) the higher the PhC hydrophobicity, the higher the PAC adsorption capacity in both water matrices; (iii) hydrophobic interactions probably overweight electrostatic interactions between the PhCs and the slightly positively charged PAC in these real water matrices with background organics and inorganics. The PhC adsorption results with ML and clarified-ML are used to calibrate the IAST-based tracer model (TRM) and predict the new PAC performance when added to AS-bioreactor vs. in post-secondary treatment, at the PhC naturally-occurring trace concentrations. The modelling projections show (i) one needs higher PAC doses than those reported in the literature, particularly in post-treatment, and (ii) the benefits of PAC dosing to the bioreactor, with only a slightly higher PAC dose being needed when compared to its post-secondary dosing and minimising the capital investment.

Novel Chemotherapeutic Agents - The Contribution of Scorpionates.

The development of safe and effective chemotherapeutic agents is one of the uppermost priorities and challenges of medicinal chemistry and new transition metal complexes are being continuously designed and tested as anticancer agents. Scorpionate ligands have played a great role in coordination chemistry, since their discovery by Trofimenko in the late 1960s, with significant contributions in the fields of catalysis and bioinorganic chemistry. Scorpionate metal complexes have also shown interesting anticancer properties, and herein, the most recent (last decade) and relevant scorpionate complexes reported for application in medicinal chemistry as chemotherapeutic agents are reviewed. The current progress on the anticancer properties of transition metal complexes bearing homo- or hetero- scorpionate ligands, derived from bis- or tris-(pyrazol-1-yl)-borate or -methane moieties is highlighted.

The influence of the textural properties of activated carbons on acetaminophen adsorption at different temperatures.

The influence of temperature (20-40 °C) on the acetaminophen adsorption onto activated carbons with different textures was studied. Different temperature dependences, not explained by kinetic effects, were observed for carbons with different micropore size distribution patterns: adsorption capacity increased for pine gasification residues (Pi-fa) derived carbons and decreased for sisal based materials. No significant variation was seen for carbon CP. The species identified by (1)H NMR spectroscopy on the back-extraction solution proved that during the adsorption process exist the conditions required to promote the formation of acetaminophen oligomers which have constrained access to the narrow microporosity. The rotation energy of the dihedral angle between monomers (estimated by electronic DFT methods) showed that conformations in the planar form are less stable than the non-planar conformation (energy barrier of 70 and 23 kJ mol(-1)), but have critical dimensions similar to the monomer and can access most of the micropore volume. The enthalpy change of the overall process showed that the energy gain of the system (endothermic) for Pi-fa samples (≈40 kJ mol(-1)) was enough to allow a change in the dimer, or even a larger oligomer, conformation to the planar form. This will permit adsorption in the narrow micropores, thus explaining the uptake increase with temperature. Non-continuous micropore size distributions centered at pore widths close to the critical dimensions of the planar form seem to be crucial for a positive evolution of the adsorption capacity with temperature.