Removal of polycyclic aromatic hydrocarbons (PAHs) from produced water using the microalgae Chlorella vulgaris cultivated in mixotrophic and heterotrophic conditions.

Chlorella vulgaris was cultivated for 15 days in 10 different treatments under mixotrophic and heterotrophic conditions, using wastewater from oil and poultry industries as the culture medium. The blends were made with produced water (PW), sterilized produced water (PWs), sterilized poultry wastewater (PoWs), sterilized seawater (SWs), and the addition of sodium nitrate to evaluate cell growth in treatments and the removal of PAHs. The heterotrophic condition showed more effective removal, having an initial concentration of 3.93 µg L-1 and a final concentration of 0.57 µg L-1 of total PAHs reporting 83%, during phycoremediation of (PW) than the mixotrophic condition, with an initial concentration of 3.93 µg L-1 and a final concentration of 1.96 and 43% removal for the PAHs. In the heterotrophic condition, the blend with (PWs + SWs) with an initial concentration of 0.90 µg L-1 and a final concentration of 0.32 µg L-1 had 64% removal of total PAHs compared to the mixotrophic condition with 37% removal having an initial concentration of 0.90 µg L-1 and a final concentration of 0.56 µg L-1. However, the best result in the mixotrophic condition was obtained using a blend of (PWs + PoWs) that had an initial cell concentration of 1.18 × 105 cells mL-1 and reached a final cell concentration of 4.39 × 105 cells mL-1, an initial concentration of 4.76 µg L-1 and a final concentration of 0.37 µg L-1 having a 92% total removal of PAHs. The biostimulation process increased the percentage of PAHs removal by 45% (PW) in the mixotrophic condition. This study showed that it is possible to allow an environmental remediation strategy that significantly reduces effluent toxicity and generates high value-added biomass in contaminated effluents rich in nutrients and carbon, based on a circular bioeconomy model.

Remediation of petroleum contaminated saline water using value-added adsorbents derived from waste coconut fibres.

Oil spill from petrochemical industries into marine areas has resulted in severe environmental pollution. The use of natural sorbents to clean marine areas affected by petroleum contaminants is a promising approach to alleviate this problem. Therefore, this study aims at developing an technique that uses waste coconut fibres (Cocos nucifera L.) pre-treated with a "green" solvent, viz. protic ionic liquid (PIL) [2-HEA][Ac], for the remediation of oil in saline water. Conventional chemical pre-treatments (mercerisation/acetylation) and the innovative treatment (using PIL), chemical characterisation, Scanning Electron Microscope, Fourier-transform infrared spectroscopy, and oil sorption tests in hydrodynamic simulation on a laboratory scale were conducted. The fibres treated with PIL[2-HEA][Ac] possessed more pores and hydrophobic content than the mercerised/acetylated coconut fibres, indicating the efficiency of sorption. The average sorption of the PIL[2-HEA][Ac] fibre was 1.40 ± 0.06 g/g and that of the mercerised/acetylated fibre was 1.32 ± 0.12 g/g. Although the difference in sorption results is not significant, according to the Tukey test, fibre pre-treatment with PIL[2-HEA][Ac] is more advantageous than conventional treatments because it exhibits better average sorption results; furthermore, the synthesis procedure for PIL[2-HEA][Ac] is simple, reusable and non-toxic. Therefore, the use of these petroleum biosorbents is a technology with environmental benefits, such as the availability of the biosorbent in the form of biodegradable waste and treated with a "green" solvent, both of which can be reused. Thus, it adds value for its use in industries with a circular economy product; that are environment-friendly and economical.