Engineering a novel antibacterial agent with multifunction: Protocatechuic acid-grafted-quaternized chitosan.

As a mild cationic antibacterial agent, hydroxypropyltrimethyl ammonium chloride chitosan (HACC) could kill gram-positive bacteria and gram-positive drug-resistant bacteria without cytotoxicity. Nevertheless, it was not effective against gram-negative bacteria. Herein, protocatechuic acid (PA) with broad-spectrum antibacterial properties and pharmacological activities was grafted on HACC. PA-g-HACC showed favourable antioxidant capacity and anti-inflammatory properties. Most importantly, the results of antibacterial assay indicated that the antibacterial rates of all PA-g-HACC groups against Staphylococcus aureus (S. aureus) and methicillin-resistant Staphylococcus aureus (MRSA) were above 92 %, and the antibacterial rate of PA-g-HACC against E. coli was increased with the amount of grafted PA. Furthermore, the cytocompatibility of PA-g-HACC was improved by appropriate grafting ratio of PA, while excessive grafted PA can lead to toxicity. We believe that PA-g-HACC in optimum grafting ratio of PA with favorable antibacterial properties, pharmacological activities and cytocompatibility will be potential antibacterial agent for treating infections.

In vivo evaluation of the anti-infection potential of gentamicin-loaded nanotubes on titania implants.

Titanium-based implants have been widely used in orthopedic surgery; however, failures still occur. Our in vitro study has demonstrated that gentamicin-loaded, 80 nm-diameter nanotubes possessed both antibacterial and osteogenic activities. Thus, the aim of this study was to further investigate the in vivo anti-infection effect of the titanium implants with gentamicin-loaded nanotubes. Thirty-six male Sprague Dawley rats were used to establish an implant-associated infection model. A volume of 50 µL Staphylococcus aureus suspension (1×10(5) CFU/mL) was injected into the medullary cavity of the left femur, and then the titanium rods without modification (Ti), titanium nanotubes without drug loading (NT), and gentamicin-loaded titanium nanotubes (NT-G) were inserted with phosphate-buffered saline-inoculated Ti rods as a blank control. X-ray images were obtained 1 day, 21 days, and 42 days after surgery; micro-computed tomography, microbiological, and histopathological analyses were used to evaluate the infections at the time of sacrifice. Radiographic signs of bone infection, including osteolysis, periosteal reaction, osteosclerosis, and damaged articular surfaces, were demonstrated in the infected Ti group and were slightly alleviated in the NT group but not observed in the NT-G group. Meanwhile, the radiographic and gross bone pathological scores of the NT-G group were significantly lower than those of the infected Ti group (P<0.01). Explant cultures revealed significantly less bacterial growth in the NT-G group than in the Ti and NT groups (P<0.01), and the NT group showed decreased live bacterial growth compared with the Ti group (P<0.01). Confocal laser scanning microscopy, scanning electron microscopy, and histopathological observations further confirmed decreased bacterial burden in the NT-G group compared with the Ti and NT groups. We concluded that the NT-G coatings can significantly prevent the development of implant-associated infections in a rat model; therefore, they may provide an effective drug-loading strategy to combat implant-associated infections in clinic.

Covalently immobilised type I collagen facilitates osteoconduction and osseointegration of titanium coated implants.

BACKGROUND/OBJECTIVE: Plasma-sprayed titanium coating (TC) with rough surfaces has been successfully applied in hip or knee prostheses. This study aimed to investigate the osteoconduction and osseointegration of Type I collagen covalently immobilised on TC (TC-AAC) compared with those of TC. METHODS: In vitro, the migration of human mesenchymal stem cells (hMSCs) on TC and TC-AAC was observed by scanning electron microscopy and visualised fluorescent live/dead assay. In vivo, a rabbit model with femur condyle defect was employed, and implants of TC and TC-AAC were embedded into the femur condyles. RESULTS: Collagen immobilised on TC could promote hMSCs' migration into the porous structure of the TC. Micro computed tomography images showed that bone trabeculae were significantly more abundant around TC-AAC implants than around TC implants. Fluorescence micrographs indicated more active new-bone formation around implants in the TC-AAC group than in the TC group. The measurement of bone-implant contact on histological sections indicated significantly greater osteointegration around TC-AAC implants than around TC ones. CONCLUSION: Immobilised Type I collagen could improve the osteoconduction and osseointegration of TC implants.

Inhibited Bacterial Adhesion and Biofilm Formation on Quaternized Chitosan-Loaded Titania Nanotubes with Various Diameters.

Titania nanotube-based local drug delivery is an attractive strategy for combating implant-associated infection. In our previous study, we demonstrated that the gentamicin-loaded nanotubes could dramatically inhibit bacterial adhesion and biofilm formation on implant surfaces. Considering the overuse of antibiotics may lead to the evolution of antibiotic-resistant bacteria, we synthesized a new quaternized chitosan derivative (hydroxypropyltrimethyl ammonium chloride chitosan, HACC) with a 27% degree of substitution (DS; referred to as 27% HACC) that had a strong antibacterial activity and simultaneously good biocompatibility with osteogenic cells. Titania nanotubes with various diameters (80, 120, 160, and 200 nm) and 200 nm length were loaded with 2 mg of HACC using a lyophilization method and vacuum drying. Two standard strain, methicillin-resistant Staphylococcus aureus (American Type Culture Collection 43300) and Staphylococcus epidermidis (American Type Culture Collection 35984), and two clinical isolates, S. aureus 376 and S. epidermidis 389, were selected to investigate the bacterial adhesion at 6 h and biofilm formation at 24, 48, and 72 h on the HACC-loaded nanotubes (NT-H) using the spread plate method, confocal laser scanning microscopy (CLSM), and scanning electron microscopy (SEM). Smooth titanium (Smooth Ti) was also investigated and compared. We found that NT-H could significantly inhibit bacterial adhesion and biofilm formation on its surface compared with Smooth Ti, and the NT-H with 160 nm and 200 nm diameters had stronger antibacterial activity because of the extended HACC release time of NT-H with larger diameters. Therefore, NT-H can significantly improve the antibacterial ability of orthopedic implants and provide a promising strategy to prevent implant-associated infections.

In vivo effect of quaternized chitosan-loaded polymethylmethacrylate bone cement on methicillin-resistant Staphylococcus epidermidis infection of the tibial metaphysis in a rabbit model.

Infection of open tibial fractures with contamination remains a challenge for orthopedic surgeons. Local use of antibiotic-impregnated polymethylmethacrylate (PMMA) beads and blocks is a widely used procedure to reduce the risk of infection. However, the development of antibiotic-resistant organisms make the management of infection more difficult. Our in vitro study demonstrated that quaternized chitosan (hydroxypropyltrimethyl ammonium chloride chitosan [HACC])-loaded PMMA bone cement exhibits strong antibacterial activity toward antibiotic-resistant bacteria. Therefore, the present study aimed to investigate the in vivo antibacterial activity of quaternized chitosan-loaded PMMA. Twenty-four adult female New Zealand White rabbits were used in this study. The right proximal tibial metaphyseal cavity was prepared, 10(7) CFU of methicillin-resistant Staphylococcus epidermidis was inoculated, and PMMA-only, gentamicin-loaded PMMA (PMMA-G), chitosan-loaded PMMA (PMMA-C), or HACC-loaded PMMA (PMMA-H) bone cement cylinders were inserted. During the follow-up period, the infections were evaluated using X rays on days 21 and 42 and histopathological and microbiological analyses on day 42 after surgery. Radiographic indications of bone infections, including bone lysis, periosteal reactions, cyst formation, and sequestral bone formation, were evident in the PMMA, PMMA-G, and PMMA-C groups but not in the PMMA-H group. The radiographic scores and gross bone pathological and histopathological scores were significantly lower in the PMMA-H group than in the PMMA, PMMA-G, and PMMA-C groups (P < 0.05). Explant cultures also indicated significantly less bacterial growth in the PMMA-H group than in the PMMA, PMMA-G, and PMMA-C groups (P < 0.01). We concluded that PMMA-H bone cement can inhibit the development of bone infections in this animal model inoculated with antibiotic-resistant bacteria, thereby demonstrating its potential application for treatment of local infections in open fractures.

Synthesis and characterization of magnetic iron oxide/calcium silicate mesoporous nanocomposites as a promising vehicle for drug delivery.

The synthesis of the mesoporous nanocomposites consisting of magnetic iron oxide nanoparticles and calcium silicate with uniform size has been a challenge, although they are the ideal potential agent for medical diagnosis and therapy. In this work, the core/shell structured mesoporous nanocomposites consisting of magnetic iron oxide nanoparticles as the core and calcium silicate as the shell have been successfully synthesized using a two liquid phase system by ultrasound irradiation, in which the hydrophobic phase is composed of hydrophobic Fe(3)O(4) nanoparticles and tetraethyl orthosilicate (TEOS), and the water phase consists of Ca(NO(3))(2), NaOH, and water. The hollow mesoporous nanocomposites consisting of magnetic iron oxide nanoparticles and calcium silicate are obtained by adding a certain amount of the inert hydrophobic solvent isooctane in the reaction system before ultrasound irradiation. The nanocomposites have a superparamagnetic behavior, high Brunauer-Emmett-Teller (BET) specific surface area (474 m(2) g(-1)), and high Barrett-Joyner-Halenda (BJH) pore volume (2.75 cm(3) g(-1)). The nanocomposites have high drug loading capacities for bovine hemoglobin, docetaxel, and ibuprofen. The docetaxel-loaded nanocomposites have the anticancer ability and, thus, are promising for applications in biomedical fields.