Ion-imprinted macroporous polyethyleneimine incorporated chitosan/layered hydrotalcite foams for the selective biosorption of U(VI) ions.

In order to prevent uranium pollution and recovery uranium resources, it was necessary to find a highly efficient adsorbent for radioactive wastewater treatment. Herein, U(VI) imprinted polyethyleneimine (PEI) incorporated chitosan/layered hydrotalcite composite foam (IPCL) was synthesized by combining ion-imprinting and freeze-drying techniques. IPCL has a high amino/imino content and an ultralight macroporous structure, making it capable of efficiently adsorbing U(VI) and easy to separate; Especially after ion-imprinting, vacancies matching the size of uranyl ions were formed, significantly improving U(VI) selectivity. The adsorption isotherms and adsorption kinetics were in accordance with the Freundlich model and PSO model respectively, indicating that heterogeneous adsorption of U(VI) by the adsorbents. The adsorption capacity of IPCL-2 for U(VI) reached 278.8. mg/g (under the conditions of optimal pH 5.0, temperature of 298 K, contact time of 2 h, and adsorbent dosage of 0.2 g/L), which is almost double of that for the non-imprinted foam (PCL-2, 138.2 mg/g), indicating that IPCL-2 can intelligently recognize U(VI). The heterogeneous adsorption mechanism of U(VI) by IPCL-2 involves complexation, ion-exchange and isomorphic substitution. The adsorption of U(VI) by IPCL-2 is spontaneous and endothermic. IPCL-2 has excellent adsorption performance for U(VI), and is a promising adsorbent for radioactive pollution control.

Macroporous and ultralight polyethyleneimine-grafted chitosan/nano-TiO2 foam as a novel adsorbent with antibacterial activity for the efficient U(VI) removal.

The radioactive contamination from the excessive discharge of uranium-containing wastewater seriously threatens environmental safety and human health. Herein, macroporous and ultralight polyethyleneimine-grafted chitosan/nano-TiO2 composite foam (PCT) with antibacterial activity was synthesized, which could quickly remove U(VI) from solution. Among different PCT adsorbents, PCT-2 had the best adsorption performance for U(VI), which could be due to its honeycomb macroporous structures and the presence of abundant amino/imine groups. The kinetics and adsorption isotherms data were found in agreement with the pseudo-second-order model and the Langmuir model, respectively, indicating chemisorption or complexation as the main adsorption mechanism. The saturated adsorption capacity of PCT-2 for U(VI) reaches 259.91 mg/g at pH 5.0 and 298 K. The PCT-2 also presents good selectivity for U(VI) with the coefficient (ßU/M) order of Na+ > K+ > Mg2+ > Ca2+ > Ni2+ > Co2+ > Mn2+ > Al3+ > Fe3+ > Cu2+. The adsorption mechanism was explored using FT-IR and XPS analysis, indicating that amino/imine groups and hydroxyl groups are responsible for U(VI) complexation. Thermodynamic calculations show that U(VI) adsorption is endothermic and spontaneous. The ease of preparation, excellent adsorption performance and environmental friendliness of PCT-2 make it a novel adsorbent with antibacterial activity for radioactive contamination control.

Polyethyleneimine incorporated chitosan/α-MnO2 nanorod honeycomb-like composite foams with remarkable elasticity and ultralight property for the effective removal of U(VI) from aqueous solution.

The development of new adsorbents is needed to address the environmental challenges of radioactive wastewater treatment. Herein we reported a novel polyethyleneimine incorporated chitosan/α-MnO2 nanorod honeycomb-like composite (PCM) foam with remarkable elasticity and ultralight property for U(VI) removal. Among different PCM sorbents, PCM-40 possessed the highest sorption capacity for U(VI) due to its highly developed macroporous structure and high content of amine/imine groups. The kinetics were well-simulated by the pseudo-second-order model, indicating chemisorption as the rate-controlling step. The isotherms could be described by the Langmuir model, suggesting mono-layer homogeneous sorption of U(VI). The maximum sorption U(VI) capacity for PCM-40 reaches up to 301.9 mg/g at pH 4.5 and 298 K. The thermodynamic parameters revealed the spontaneous and endothermic nature of the adsorption process. The main sorption mechanism is related to the complexation of uranyl ions with the amine/imine and hydroxyl groups. The high sorption capacity, fast kinetic rate and relatively good selectivity of PCM-40 highlights its promising application in radioactive pollution cleanup.