Ultralow-Overpotential Acidic Oxygen Evolution Reaction Over Bismuth Telluride-Carbon Nanotube Heterostructure with Organic Framework.

The state-of-the-art iridium and ruthenium oxides-based materials are best known for high efficiency and stability in acidic oxygen evolution reaction (OER). However, the development of economically feasible catalysts for water-splitting technologies is challenging by the requirements of low overpotential, high stability, and resistance of catalysts to dissolution during the acidic oxygen evolution reaction . Herein, an organometallic core-shell heterostructure composed of a carbon nanotube core (CNT) and bismuth telluride (Bi2Te3) shell (denoted as nC-Bi2Te3) is designed and use it as a catalyst for the acidic OER. The proposed catalyst achieves an ultralow overpotential of 160 mV at 10 mA cm-2 (geometrical), thereby outperforming most of the state-of-the-art precious-metal-based catalysts. The low Tafel slope of 30 mV dec-1 and charge transfer resistance (RCT) of 1.5 Ω demonstrate its excellent electrocatalytic activity. The morphological and chemical compositions of nC-Bi2Te3 enable the generation of ─OH functional group in the Bi─Te sections formed via a ligand support, which enhances the absorption capacity of H+ ions and increases the intrinsic catalytic activity. The presented insights regarding the material composition-structure relationship can help expand the application scope of high-performance catalysts.

Engineering MoSe2/WS2 Hybrids to Replace the Scarce Platinum Electrode for Hydrogen Evolution Reactions and Dye-Sensitized Solar Cells.

In recent times, two-dimensional transition-metal dichalcogenides (TMDs) have become extremely attractive and proficient electrodes for dye-sensitized solar cells (DSSCs) and water electrolysis hydrogen evolution as alternatives to the scarce metal platinum (Pt). The active TMD molybdenum selenide (MoSe2) and tungsten disulfide (WS2) are inspiring systems owing to their abundance of active sulfur and selenium sites, but their outputs are lacking due to their inactive basal planes and ineffective transport behavior. In this work, van der Waals interrelated MoSe2/WS2 hybrid structures were constructed on conducting glass substrates by chemicophysical methodologies. For the first time, the constructed MoSe2/WS2 structures were effectively used as a counter electrode for DSSCs and an active electrode for hydrogen evolution to replace the nonabundant Pt. The assembled DSSCs using the designed MoSe2/WS2 heterostructure counter electrode provided a superior power-conversion efficiency of 9.92% and a photocurrent density of 23.10 mA·cm-2, unmatchable by most of the TMD-based structures. The MoSe2/WS2 heterostructure displayed excellent electrocatalytic hydrogen evolution behavior with a 75 mV overpotential to drive a 10 mA·cm-2 current density, a 60 mV·dec-1 Tafel slope, and an over 20 h durable process in an acidic medium. The results demonstrated the advantages of the MoSe2/WS2 hybrid development for generating interfacial transport and active facet distribution and enriching the electrocatalytic activity for DSSCs and the water-splitting hydrogen evolution process.

An all carbon dye sensitized solar cell: A sustainable and low-cost design for metal free wearable solar cell devices.

Lightweight carbon electrodes are the new candidates for photovoltaic devices due to their temperature resistivity, ease of fabrication, and skin comfortability. Herein, a sustainable and facile strategy has been proposed for metal free all carbon dye sensitized solar cell (C-DSSC), assembled by stacking carbon front electrode (CFE) and carbon counter electrode (CCE). The CFE demonstrated adequate light transmittance (70-50%) while maintaining efficient photon absorption and charge separation mechanism due to dye coated TiO2 nanorods (P25-R). The graphene dip coated carbon counter electrode (Gr@CCE) possesses remarkable electro catalytic activity towards I3-/I- redox couple with low charge transfer resistance (RCT = 0.79 Ω). The sustainable design of C-DSSC attained ~6 ± 0.5% efficiency with high photocurrent density of 18.835 mA. cm-2. The superior performance of C-DSSC is accredited to its improved charge mobility, low internal resistance, and better interfacial electrode contact. The thickness of C-DSSC is ≤3 mm eliminates the need for rigid glass in DSSC.

Fabrication of conductive and printable nano carbon ink for wearable electronic and heating fabrics.

Printable Nano carbon colloidal ink has fascinated great attention due to their exceptional potential for large-scale application for powering wearable electronic devices. Though, it is challenging to incorporate various characteristics together such as mechanical stability, solution printability, conductivity, electrocatalytic activity, and heat generating properties in the flexible fabric based electrode system. In this research the development of printable composites made with woven/nonwoven fabrics printed with multiwall carbon nanotubes for flexible and wearable heating system and cathodes for dye-sensitized solar cells (DSSC), respectively. We report a printable carbon ink of multiwall carbon nanotubes (MWCNT) synthesized by globular protein serum bovine albumin (BSA). BSA is amino-rich dispersant used to disperse MWCNT and generate tubular porous carbon matrix. High loading ratio of BSA increases the dispersing power of MWCNT and increased porosity of CNT matrix. The proposed Organic Nanocarbon ink (Organic NC) serve the pathways for electron transport leading to higher heat dissipation as the well high conductivity and electrocatalytic activity. It was interesting to reveal that different kinds of woven and nonwoven fabrics displayed exceptional thermal properties when DC voltage was applied. The heat generating properties were highly dependent on the type of fabric and conductive ink uptake. Our proposed Organic NC printed fabric system exhibited superior conductivity with 15-20â€¯Ω resistivity and lower charge transfer resistance RCT = 2.69 Ω, demonstrated an 8% power conversion efficiency of DSSC. The proposed research paves the ways for solution printable high performance woven and nonwoven conductive and thermoelectric materials for wearable electronics.

Fabrication of a flexible and conductive lyocell fabric decorated with graphene nanosheets as a stable electrode material.

Textile electrodes are highly desirable for wearable electronics as they offer light-weight, flexibility, cost effectiveness and ease of fabrication. Here, we propose the use of lyocell fabric as a flexible textile electrode because of its inherently super hydrophilic characteristics and increased moisture uptake. A highly concentrated colloidal solution of graphene oxide nanosheets (GONs) was coated on to lyocell fabric and was then reduced in to graphene nanosheets (GNs) using facile chemical reduction method. The proposed textile electrode has a very high surface conductivity with a very low value of surface resistance of only 40Ωsq(-1), importantly without use of any binding or adhesive material in the processing step. Atomic force spectroscopy (AFM) and Transmission electron microscopy (TEM) were conducted to study the topographical properties and sheet exfoliation of prepared GONs. The surface morphology, structural characterization and thermal stability of the fabricated textile electrode were studied by field emission scanning electron microscopy (FE-SEM), Fourier transform infrared spectroscopy (FT-IR), X ray photon spectroscopy (XPS), Raman spectroscopy, Wide angle X ray diffraction spectroscopy (WAXD) and Thermogravimetric analysis (TGA) respectively. These results suggest that the GONs is effectively adhered on to the lyocell fabric and the conversion of GONs in to GNs by chemical reduction has no adverse effect on the crystalline structure of textile substrate. The prepared graphene coated conductive lyocell fabric was found stable in water and electrolyte solution and it maintained nearly same surface electrical conductivity at various bending angles. The electrical resistance results suggest that this lyocell based textile electrode (L-GNs) is a promising candidate for flexible and wearable electronics and energy harvesting devices.

Highly Functional TNTs with Superb Photocatalytic, Optical, and Electronic Performance Achieving Record PV Efficiency of 10.1% for 1D-Based DSSCs.

Different nanostructures of TiO2 play an important role in the photocatalytic and photoelectronic applications. TiO2 nanotubes (TNTs) have received increasing attention for these applications due to their unique physicochemical properties. Focusing on highly functional TNTs (HF-TNTs) for photocatalytic and photoelectronic applications, this study describes the facile hydrothermal synthesis of HF-TNTs by using commercial and cheaper materials for cost-effective manufacturing. To prove the functionality and applicability, these TNTs are used as scattering structure in dye-sensitized solar cells (DSSCs). Photocatalytic, optical, Brunauer-Emmett-Teller (BET), electrochemical impedance spectrum, incident-photon-to-current efficiency, and intensity-modulated photocurrent spectroscopy/intensity-modulated photovoltage spectroscopy characterizations are proving the functionality of HF-TNTs for DSSCs. HF-TNTs show 50% higher photocatalytic degradation rate and also 68% higher dye loading ability than conventional TNTs (C-TNTs). The DSSCs having HF-TNT and its composite-based multifunctional overlayer show effective light absorption, outstanding light scattering, lower interfacial resistance, longer electron lifetime, rapid electron transfer, and improved diffusion length, and consequently, J SC , quantum efficiency, and record photoconversion efficiency of 10.1% using commercial N-719 dye is achieved, for 1D-based DSSCs. These new and highly functional TNTs will be a concrete fundamental background toward the development of more functional applications in fuel cells, dye-sensitized solar cells, Li-ion batteries, photocatalysis process, ion-exchange/adsorption process, and photoelectrochemical devices.

A Novel Activated-Charcoal-Doped Multiwalled Carbon Nanotube Hybrid for Quasi-Solid-State Dye-Sensitized Solar Cell Outperforming Pt Electrode.

Highly conductive mesoporous carbon structures based on multiwalled carbon nanotubes (MWCNTs) and activated charcoal (AC) were synthesized by an enzymatic dispersion method. The synthesized carbon configuration consists of synchronized structures of highly conductive MWCNT and porous activated charcoal morphology. The proposed carbon structure was used as counter electrode (CE) for quasi-solid-state dye-sensitized solar cells (DSSCs). The AC-doped MWCNT hybrid showed much enhanced electrocatalytic activity (ECA) toward polymer gel electrolyte and revealed a charge transfer resistance (RCT) of 0.60 Ω, demonstrating a fast electron transport mechanism. The exceptional electrocatalytic activity and high conductivity of the AC-doped MWCNT hybrid CE are associated with its synchronized features of high surface area and electronic conductivity, which produces higher interfacial reaction with the quasi-solid electrolyte. Morphological studies confirm the forms of amorphous and conductive 3D carbon structure with high density of CNT colloid. The excessive oxygen surface groups and defect-rich structure can entrap an excessive volume of quasi-solid electrolyte and locate multiple sites for iodide/triiodide catalytic reaction. The resultant D719 DSSC composed of this novel hybrid CE fabricated with polymer gel electrolyte demonstrated an efficiency of 10.05% with a high fill factor (83%), outperforming the Pt electrode. Such facile synthesis of CE together with low cost and sustainability supports the proposed DSSCs' structure to stand out as an efficient next-generation photovoltaic device.

Integrating high electrical conductivity and photocatalytic activity in cotton fabric by cationizing for enriched coating of negatively charged graphene oxide.

Electroconductive textiles have attended tremendous focus recently and researchers are making efforts to increase conductivity of e-textiles, in order to increase the use of such flexible and low cost textile materials. In this study, surface conductivity and photo catalytic activity of standard cotton fabric (SCF) was enhanced by modifying its surface charge, from negative to positive, using Bovine Serum Albumin (BSA) as a cationic agent, to convert it into cationised cotton fabric (CCF). Then, both types of fabrics were dip coated with a simple dip and dry technique for the adsorption of negatively charged graphene oxide (GO) sheets onto its surface. This resulted in 67.74% higher loading amount of GO on the CCF making self-assembly. Finally, this coating was chemically converted by vapor reduction using hydrazine hydrate to reduced graphene oxide (rGO) for restoration of a high electrical conductivity at the fabric surface. Our results revealed that with such high loading of GO, the surface resistance of CCF was only 40Ω/sq as compared to 510Ω/sq of the SCF and a 66% higher photo catalytic activity was also achieved through cationization for improved GO coating. Graphene coated SCF and CCF were characterized using FE-SEM, FTIR, Raman, UV-vis, WAXD, EDX and XPS spectroscopy to ascertain successful reduction of GO to rGO. The effect of BSA treatment on adsorption of cotton fabric was studied using drop shape analyzer to measure contact angle and for thermal and mechanical resistance, the fabric was tested for TGA and tensile strength, respectively. rGO coated fabric also showed slightly improved thermal stability yet a minor loss of strength was observed. The high flexibility, photocatalytic activity and excellent conductivity of this fabric suggests that it can be used as an electrode material for various applications.

Multiwalled carbon nanotube coated polyester fabric as textile based flexible counter electrode for dye sensitized solar cell.

Textile wearable electronics offers the combined advantages of both electronics and textile characteristics. The essential properties of these flexible electronics such as lightweight, stretchable, and wearable power sources are in strong demand. Here, we have developed a facile route to fabricate multi walled carbon nanotube (MWCNT) coated polyester fabric as a flexible counter electrode (CE) for dye sensitized solar cells (DSSCs). A variety of MWCNT and enzymes with different structures were used to generate individual enzyme-dispersed MWCNT (E-MWCNT) suspensions by non-covalent functionalization. A highly concentrated colloidal suspension of E-MWCNT was deposited on polyester fabric via a simple tape casting method using an air drying technique. In view of the E-MWCNT coating, the surface structure is represented by topologically randomly assembled tubular graphene units. This surface morphology has a high density of colloidal edge states and oxygen-containing surface groups which execute multiple catalytic sites for iodide reduction. A highly conductive E-MWCNT coated fabric electrode with a surface resistance of 15 Ω sq(-1) demonstrated 5.69% power conversion efficiency (PCE) when used as a flexible CE for DSSCs. High photo voltaic performance of our suggested system of E-MWCNT fabric-based DSSCs is associated with high sheet conductivity, low charge transfer resistance (RCT), and excellent electro catalytic activity (ECA). Such a conductive fabric demonstrated stable conductivity against bending cycles and strong mechanical adhesion of E-MWCNT on polyester fabric. Moreover, the polyester fabric is hydrophobic and, therefore, has good sealing capacity and retains the polymer gel electrolyte without seepage. This facile E-MWCNT fabric CE configuration provides a concrete fundamental background towards the development of textile-integrated solar cells.