RESUMEN
OBJECTIVE: The present study aimed to assess the consistencies and performances of deep learning (DL) models in the diagnosis of condylar osteoarthritis (OA) among patients with dentofacial deformities using panoramic temporomandibular joint (TMJ) projection images. METHODS: A total of 68 TMJs with or without condylar OA in dentofacial deformity patients were tested to verify the consistencies and performances of DL models created using 252 TMJs with or without OA in TMJ disorder and dentofacial deformity patients; these models were used to diagnose OA on conventional panoramic (Con-Pa) images and open (Open-TMJ) and closed (Closed-TMJ) mouth TMJ projection images. The GoogLeNet and VGG-16 networks were used to create the DL models. For comparison, two dental residents with < 1 year of experience interpreting radiographs evaluated the same condyle data that had been used to test the DL models. RESULTS: On Open-TMJ images, the DL models showed moderate to very good consistency, whereas the residents' demonstrated fair consistency on all images. The areas under the curve (AUCs) of both DL models on Con-Pa (0.84 for GoogLeNet and 0.75 for VGG-16) and Open-TMJ images (0.89 for both models) were significantly higher than the residents' AUCs (p < 0.01). The AUCs of the DL models on Open-TMJ images (0.89 for both models) were higher than the AUCs on Closed-TMJ images (0.72 for both models). CONCLUSIONS: The DL models created in this study could help residents to interpret Con-Pa and Open-TMJ images in the diagnosis of condylar OA.
RESUMEN
OBJECTIVES: The objective of this study was to enhance the visibility of soft tissues on cone-beam computed tomography (CBCT) using a CycleGAN network trained on CT images. METHODS: Training and evaluation of the CycleGAN were conducted using CT and CBCT images collected from Aichi Gakuin University (α facility) and Osaka Dental University (ß facility). Synthesized images (sCBCT) output by the CycleGAN network were evaluated by comparing them with the original images (oCBCT) and CT images, and assessments were made using histogram analysis and human scoring of soft-tissue anatomical structures and cystic lesions. RESULTS: The histogram analysis showed that on sCBCT, soft-tissue anatomical structures showed significant shifts in voxel intensity toward values resembling those on CT, with the mean values for all structures approaching those of CT and the specialists' visibility scores being significantly increased. However, improvement in the visibility of cystic lesions was limited. CONCLUSIONS: Image synthesis using CycleGAN significantly improved the visibility of soft tissue on CBCT, with this improvement being particularly notable from the submandibular region to the floor of the mouth. Although the effect on the visibility of cystic lesions was limited, there is potential for further improvement through refinement of the training method.
RESUMEN
OBJECTIVE: The aim of this study was to clarify numerical values for differentiating nasopalatine duct cysts (NPDCs) from radicular cysts (RCs) arising in the anterior maxilla on computed tomography (CT) or cone-beam CT (CBCT) images. METHODS: CT or CBCT images of histologically proven NPDCs (n = 30) and RCs (n = 33) beyond the midline of the maxilla were investigated to determine two asymmetry indices on axial images of the maximum lesion area. The lateral asymmetry index was calculated based on two distances from each of the lateral ends of the lesion to the midsagittal plane. The index was defined as the difference between the two distances divided by their sum. The labio-palatal asymmetry index was determined by the distance between the labial and palatal ends of the lesion and the coronal plane passing through the central incisor root apex. The performance of these indices was assessed by receiver operating characteristic (ROC) analysis. The cutoff values for differentiating NPDCs from RCs were determined with the Youden procedure on the ROC curve. RESULTS: The area under the ROC curve was 0.97 for the lateral asymmetry index and 0.88 for the labio-palatal asymmetry index. The cutoff values for differentiation were 0.36 and 0.68 for the lateral and labio-palatal asymmetry indices, respectively. CONCLUSION: The lateral asymmetry index appeared to be an effective reference for differentiating NPDCs from RCs on CT or CBCT images. When the index was less than the cutoff value, a diagnosis of NPDC was strongly suggested.
RESUMEN
The objectives of this study were to create a mutual conversion system between contrast-enhanced computed tomography (CECT) and non-CECT images using a cycle generative adversarial network (cycleGAN) for the internal jugular region. Image patches were cropped from CT images in 25 patients who underwent both CECT and non-CECT imaging. Using a cycleGAN, synthetic CECT and non-CECT images were generated from original non-CECT and CECT images, respectively. The peak signal-to-noise ratio (PSNR) and structural similarity index measure (SSIM) were calculated. Visual Turing tests were used to determine whether oral and maxillofacial radiologists could tell the difference between synthetic versus original images, and receiver operating characteristic (ROC) analyses were used to assess the radiologists' performances in discriminating lymph nodes from blood vessels. The PSNR of non-CECT images was higher than that of CECT images, while the SSIM was higher in CECT images. The Visual Turing test showed a higher perceptual quality in CECT images. The area under the ROC curve showed almost perfect performances in synthetic as well as original CECT images. In conclusion, synthetic CECT images created by cycleGAN appeared to have the potential to provide effective information in patients who could not receive contrast enhancement.
RESUMEN
Purpose: The aims of this study were to create a deep learning model to distinguish between nasopalatine duct cysts (NDCs), radicular cysts, and no-lesions (normal) in the midline region of the anterior maxilla on panoramic radiographs and to compare its performance with that of dental residents. Materials and Methods: One hundred patients with a confirmed diagnosis of NDC (53 men, 47 women; average age, 44.6±16.5 years), 100 with radicular cysts (49 men, 51 women; average age, 47.5±16.4 years), and 100 with normal groups (56 men, 44 women; average age, 34.4±14.6 years) were enrolled in this study. Cases were randomly assigned to the training datasets (80%) and the test dataset (20%). Then, 20% of the training data were randomly assigned as validation data. A learning model was created using a customized DetectNet built in Digits version 5.0 (NVIDIA, Santa Clara, USA). The performance of the deep learning system was assessed and compared with that of two dental residents. Results: The performance of the deep learning system was superior to that of the dental residents except for the recall of radicular cysts. The areas under the curve (AUCs) for NDCs and radicular cysts in the deep learning system were significantly higher than those of the dental residents. The results for the dental residents revealed a significant difference in AUC between NDCs and normal groups. Conclusion: This study showed superior performance in detecting NDCs and radicular cysts and in distinguishing between these lesions and normal groups.
RESUMEN
Purpose: The purpose of this study was to clarify the panoramic image differences of cleft alveolus patients with or without a cleft palate, with emphases on the visibility of the line formed by the junction between the nasal septum and nasal floor (the upper line) and the appearances of the maxillary lateral incisor. Materials and Methods: Panoramic radiographs of 238 patients with cleft alveolus were analyzed for the visibility of the upper line, including clear, obscure or invisible, and the appearances of the maxillary lateral incisor, regarding congenital absence, incomplete growth, delayed eruption and medial inclination. Differences in the distribution ratio of these visibility and appearances were verified between the patients with and without a cleft palate using the chi-square test. Results: There was a significant difference in the visibility distribution of the upper line between the patients with and without a cleft palate (p<0.05). In most of the patients with a cleft palate, the upper line was not observed. In the unilateral cleft alveolus patients, the medial inclination of the maxillary lateral incisor was more frequently observed in patients with a cleft palate than in patients without a cleft palate. Conclusion: Two differences were identified in panoramic appearances. The first was the disappearance (invisible appearance) of the upper line in patients with a cleft palate, and the second was a change in the medial inclination on the affected side maxillary lateral incisor in unilateral cleft alveolus patients with a cleft palate.
RESUMEN
OBJECTIVE: This systematic review was performed to examine the usefulness of salivary gland ultrasound elastography (USE) as a diagnostic tool for Sjögren's syndrome (SjS). METHODS: Electronic databases (MEDLINE, EMBASE, the Cochrane Library, and Web of Science: Science Citation Index) were searched to identify studies using USE to diagnose SjS from database inception to 15 July 2022. The primary outcome was improved diagnostic accuracy for SjS with the use of USE. Risk of bias and applicability concerns were assessed using the GRADE system, which is continuously developed by the GRADE Working Group. RESULTS: Among 4550 screened studies, 24 full-text articles describing the applications of USE to diagnose SjS were reviewed. The overall risk of bias was determined to be low for 17 of the 24 articles, medium for 5, and high for 2. Articles comparing patients with SjS and healthy subjects reported high diagnostic accuracy of USE, with most results showed statistically significant differences (parotid glands: 15 of the 16 articles, submandibular glands: 11 of the 14 articles). CONCLUSIONS: This systematic review suggests that the assessment of salivary glands using USE is a useful diagnostic tool for SjS.
Asunto(s)
Diagnóstico por Imagen de Elasticidad , Glándulas Salivales , Síndrome de Sjögren , Síndrome de Sjögren/diagnóstico por imagen , Humanos , Glándulas Salivales/diagnóstico por imagenRESUMEN
INTRODUCTION: The purposes of this study were to evaluate the effect of the combined use of object detection for the classification of the C-shaped canal anatomy of the mandibular second molar in panoramic radiographs and to perform an external validation on a multicenter dataset. METHODS: The panoramic radiographs of 805 patients were collected from 4 institutes across two countries. The CBCT data of the same patients were used as "Ground-truth". Five datasets were generated: one for training and validation, and 4 as external validation datasets. Workflow 1 used manual cropping to prepare the image patches of mandibular second molars, and then classification was performed using EfficientNet. Workflow 2 used two combined methods with a preceding object detection (YOLOv7) performed for automated image patch formation, followed by classification using EfficientNet. Workflow 3 directly classified the root canal anatomy from the panoramic radiographs using the YOLOv7 prediction outcomes. The classification performance of the 3 workflows was evaluated and compared across 4 external validation datasets. RESULTS: For Workflows 1, 2, and 3, the area under the receiver operating characteristic curve (AUC) values were 0.863, 0.861, and 0.876, respectively, for the AGU dataset; 0.935, 0.945, and 0.863, respectively, for the ASU dataset; 0.854, 0.857, and 0.849, respectively, for the ODU dataset; and 0.821, 0.797, and 0.831, respectively, for the ODU low-resolution dataset. No significant differences existed between the AUC values of Workflows 1, 2, and 3 across the 4 datasets. CONCLUSIONS: The deep learning systems of the 3 workflows achieved significant accuracy in predicting the C-shaped canal in mandibular second molars across all test datasets.
Asunto(s)
Cavidad Pulpar , Mandíbula , Diente Molar , Radiografía Panorámica , Humanos , Diente Molar/diagnóstico por imagen , Diente Molar/anatomía & histología , Mandíbula/diagnóstico por imagen , Mandíbula/anatomía & histología , Cavidad Pulpar/diagnóstico por imagen , Cavidad Pulpar/anatomía & histología , Femenino , Masculino , Tomografía Computarizada de Haz Cónico/métodos , AdultoRESUMEN
A cemental tear (CeT) is a definitive clinical entity and its radiographic appearance is well known in single-rooted teeth. However, the imaging features of CeT in multi-rooted teeth have not been clarified. We report a case of CeT which arose in the maxillary first molar and exhibited an unusual appearance in cone-beam computed tomography images. The torn structure was verified as cementum by micro-computed tomography and histological analysis. The hypercementosis, most likely induced by occlusal force, might have been torn from the root by a stronger occlusal force caused by the mandibular implant. An unusual bridging structure was created between the two buccal roots. These features may occur in multi-rooted teeth with long-standing deep pockets and abscesses that are resistant to treatment.
Asunto(s)
Cemento Dental , Laceraciones , Humanos , Cemento Dental/diagnóstico por imagen , Microtomografía por Rayos X , Diente Molar/diagnóstico por imagen , Tomografía Computarizada de Haz Cónico/métodos , Raíz del Diente/diagnóstico por imagenRESUMEN
OBJECTIVES: This systematic review on generative adversarial network (GAN) architectures for dental image analysis provides a comprehensive overview to readers regarding current GAN trends in dental imagery and potential future applications. METHODS: Electronic databases (PubMed/MEDLINE, Scopus, Embase, and Cochrane Library) were searched to identify studies involving GANs for dental image analysis. Eighteen full-text articles describing the applications of GANs in dental imagery were reviewed. Risk of bias and applicability concerns were assessed using the QUADAS-2 tool. RESULTS: GANs were used for various imaging modalities, including two-dimensional and three-dimensional images. In dental imaging, GANs were utilized for tasks such as artifact reduction, denoising, and super-resolution, domain transfer, image generation for augmentation, outcome prediction, and identification. The generated images were incorporated into tasks such as landmark detection, object detection and classification. Because of heterogeneity among the studies, a meta-analysis could not be conducted. Most studies (72%) had a low risk of bias in all four domains. However, only three (17%) studies had a low risk of applicability concerns. CONCLUSIONS: This extensive analysis of GANs in dental imaging highlighted their broad application potential within the dental field. Future studies should address limitations related to the stability, repeatability, and overall interpretability of GAN architectures. By overcoming these challenges, the applicability of GANs in dentistry can be enhanced, ultimately benefiting the dental field in its use of GANs and artificial intelligence.
Asunto(s)
Artefactos , Inteligencia Artificial , Procesamiento de Imagen Asistido por Computador , MEDLINERESUMEN
This study evaluated the performance of generative adversarial network (GAN)-synthesized periapical images for classifying C-shaped root canals, which are challenging to diagnose because of their complex morphology. GANs have emerged as a promising technique for generating realistic images, offering a potential solution for data augmentation in scenarios with limited training datasets. Periapical images were synthesized using the StyleGAN2-ADA framework, and their quality was evaluated based on the average Frechet inception distance (FID) and the visual Turing test. The average FID was found to be 35.353 (± 4.386) for synthesized C-shaped canal images and 25.471 (± 2.779) for non C-shaped canal images. The visual Turing test conducted by two radiologists on 100 randomly selected images revealed that distinguishing between real and synthetic images was difficult. These results indicate that GAN-synthesized images exhibit satisfactory visual quality. The classification performance of the neural network, when augmented with GAN data, showed improvements compared with using real data alone, and could be advantageous in addressing data conditions with class imbalance. GAN-generated images have proven to be an effective data augmentation method, addressing the limitations of limited training data and computational resources in diagnosing dental anomalies.
Asunto(s)
Cavidad Pulpar , Redes Neurales de la Computación , Humanos , Cavidad Pulpar/diagnóstico por imagen , Radiólogos , Pruebas de VisiónRESUMEN
Purpose: The aim of this study was to clarify the influence of training with a different kind of lesion on the performance of a target model. Materials and Methods: A total of 310 patients (211 men, 99 women; average age, 47.9±16.1 years) were selected and their panoramic images were used in this study. We created a source model using panoramic radiographs including mandibular radiolucent cyst-like lesions (radicular cyst, dentigerous cyst, odontogenic keratocyst, and ameloblastoma). The model was simulatively transferred and trained on images of Stafne's bone cavity. A learning model was created using a customized DetectNet built in the Digits version 5.0 (NVIDIA, Santa Clara, CA). Two machines (Machines A and B) with identical specifications were used to simulate transfer learning. A source model was created from the data consisting of ameloblastoma, odontogenic keratocyst, dentigerous cyst, and radicular cyst in Machine A. Thereafter, it was transferred to Machine B and trained on additional data of Stafne's bone cavity to create target models. To investigate the effect of the number of cases, we created several target models with different numbers of Stafne's bone cavity cases. Results: When the Stafne's bone cavity data were added to the training, both the detection and classification performances for this pathology improved. Even for lesions other than Stafne's bone cavity, the detection sensitivities tended to increase with the increase in the number of Stafne's bone cavities. Conclusion: This study showed that using different lesions for transfer learning improves the performance of the model.
RESUMEN
This study aimed to determine the association between the progressive contraction of the posterior pharyngeal wall and dysphagia in postoperative patients with tongue cancer. A videofluoroscopic swallowing study (VFSS) was performed in 34 patients after tongue cancer surgery. Images were analyzed using a two-dimensional video measurement software. Cases in which the processes on the posterior pharyngeal wall moved downward from the 2nd to 4th vertebral regions were defined as "normal type", other cases were defined as "abnormal type". Twenty-four patients showed normal movement of the posterior pharyngeal wall, whereas 10 patients showed the abnormal type. The results showed that there was a significant difference in dysphagia scores between the postoperative swallowing type and swallowing dysfunction score. This implies that dysphagia is related to the movement of the posterior pharyngeal wall after tongue cancer surgery. Furthermore, the extent of resection and stage were significantly different between the normal and abnormal groups in the posterior pharyngeal wall movement. There was also a significant difference between the two groups in terms of the following: whether the tongue base was included in the excision range (p < 0.01), whether neck dissection was performed (p < 0.01), or whether reconstruction was not performed (p < 0.01). VFSS results showed that posterior pharyngeal wall movement was altered after surgery in patients with tongue cancer who had severe dysphagia.
Asunto(s)
Trastornos de Deglución , Deglución , Fluoroscopía , Neoplasias de la Lengua , Humanos , Trastornos de Deglución/diagnóstico por imagen , Trastornos de Deglución/etiología , Faringe/diagnóstico por imagen , Lengua , Neoplasias de la Lengua/cirugíaRESUMEN
OBJECTIVES: To clarify the performance of transfer learning with a small number of Waters' images at institution B in diagnosing maxillary sinusitis, based on a source model trained with a large number of panoramic radiographs at institution A. METHODS: The source model was created by a 200-epoch training process with 800 training and 60 validation datasets of panoramic radiographs at institution A using VGG-16. One hundred and eighty Waters' and 180 panoramic image patches with or without maxillary sinusitis at institution B were enrolled in this study, and were arbitrarily assigned to 120 training, 20 validation, and 40 test datasets, respectively. Transfer learning of 200 epochs was performed using the training and validation datasets of Waters' images based on the source model, and the target model was obtained. The test Waters' images were applied to the source and target models, and the performance of each model was evaluated. Transfer learning with panoramic radiographs and evaluation by two radiologists were undertaken and compared. The evaluation was based on the area of receiver-operating characteristic curves (AUC). RESULTS: When using Waters' images as the test dataset, the AUCs of the source model, target model, and radiologists were 0.780, 0.830, and 0.806, respectively. There were no significant differences between these models and the radiologists, whereas the target model performed better than the source model. For panoramic radiographs, AUCs were 0.863, 0.863, and 0.808, respectively, with no significant differences. CONCLUSIONS: This study performed transfer learning using a small number of Waters' images, based on a source model created solely from panoramic radiographs, resulting in a performance improvement to 0.830 in diagnosing maxillary sinusitis, which was equivalent to that of radiologists. Transfer learning is considered a useful method to improve diagnostic performance.
Asunto(s)
Aprendizaje Profundo , Sinusitis Maxilar , Humanos , Sinusitis Maxilar/diagnóstico por imagen , Radiografía Panorámica , Radiografía , RadiólogosRESUMEN
OBJECTIVES: The aim of the present study was to create effective deep learning-based models for diagnosing the presence or absence of cleft palate (CP) in patients with unilateral or bilateral cleft alveolus (CA) on panoramic radiographs. METHODS: The panoramic images of 491 patients who had unilateral or bilateral cleft alveolus were used to create two models. Model A, which detects the upper incisor area on panoramic radiographs and classifies the areas into the presence or absence of CP, was created using both object detection and classification functions of DetectNet. Using the same data for developing Model A, Model B, which directly classifies the presence or absence of CP on panoramic radiographs, was created using classification function of VGG-16. The performances of both models were evaluated with the same test data and compared with those of two radiologists. RESULTS: The recall, precision, and F-measure were all 1.00 in Model A. The area under the receiver operating characteristic curve (AUC) values were 0.95, 0.93, 0.70, and 0.63 for Model A, Model B, and the radiologists, respectively. The AUCs of the models were significantly higher than those of the radiologists. CONCLUSIONS: The deep learning-based models developed in the present study have potential for use in supporting observer interpretations of the presence of cleft palate on panoramic radiographs.
Asunto(s)
Fisura del Paladar , Aprendizaje Profundo , Humanos , Fisura del Paladar/diagnóstico por imagen , Radiografía Panorámica , IncisivoRESUMEN
OBJECTIVES: The purpose of this study was to evaluate the difference in performance of deep-learning (DL) models with respect to the image classes and amount of training data to create an effective DL model for detecting both unilateral cleft alveoli (UCAs) and bilateral cleft alveoli (BCAs) on panoramic radiographs. METHODS: Model U was created using UCA and normal images, and Model B was created using BCA and normal images. Models C1 and C2 were created using the combined data of UCA, BCA, and normal images. The same number of CAs was used for training Models U, B, and C1, whereas Model C2 was created with a larger amount of data. The performance of all four models was evaluated with the same test data and compared with those of two human observers. RESULTS: The recall values were 0.60, 0.73, 0.80, and 0.88 for Models A, B, C1, and C2, respectively. The results of Model C2 were highest in precision and F-measure (0.98 and 0.92) and almost the same as those of human observers. Significant differences were found in the ratios of detected to undetected CAs of Models U and C1 (p = 0.01), Models U and C2 (p < 0.001), and Models B and C2 (p = 0.036). CONCLUSIONS: The DL models trained using both UCA and BCA data (Models C1 and C2) achieved high detection performance. Moreover, the performance of a DL model may depend on the amount of training data.
Asunto(s)
Aprendizaje Profundo , Humanos , Radiografía PanorámicaRESUMEN
Although videofluorography (VFG) is an effective tool for evaluating swallowing functions, its accurate evaluation requires considerable time and effort. This study aimed to create a deep learning model for automated bolus segmentation on VFG images of patients with healthy swallowing and dysphagia using the artificial intelligence deep learning segmentation method, and to assess the performance of the method. VFG images of 72 swallowing of 12 patients were continuously converted into 15 static images per second. In total, 3910 images were arbitrarily assigned to the training, validation, test 1, and test 2 datasets. In the training and validation datasets, images of colored bolus areas were prepared, along with original images. Using a U-Net neural network, a trained model was created after 500 epochs of training. The test datasets were applied to the trained model, and the performances of automatic segmentation (Jaccard index, Sørensen-Dice coefficient, and sensitivity) were calculated. All performance values for the segmentation of the test 1 and 2 datasets were high, exceeding 0.9. Using an artificial intelligence deep learning segmentation method, we automatically segmented the bolus areas on VFG images; our method exhibited high performance. This model also allowed assessment of aspiration and laryngeal invasion.
Asunto(s)
Aprendizaje Profundo , Humanos , Procesamiento de Imagen Asistido por Computador/métodos , Deglución , Inteligencia Artificial , Redes Neurales de la ComputaciónRESUMEN
OBJECTIVE: The aim of this study was to create and assess a deep learning model using segmentation and transfer learning methods to visualize the proximity of the mandibular canal to an impacted third molar on panoramic radiographs. STUDY DESIGN: The panoramic radiographs containing the mandibular canal and impacted third molar were collected from 2 hospitals (Hospitals A and B). A total of 3200 areas were used for creating and evaluating learning models. A source model was created using the data from Hospital A, simulatively transferred to Hospital B, and trained using various amounts of data from Hospital B to create target models. The same data were then applied to the target models to calculate the Dice coefficient, Jaccard index, and sensitivity. RESULTS: The performance of target models trained using 200 or more data sets was equivalent to that of the source model tested using data obtained from the same hospital (Hospital A). CONCLUSIONS: Sufficiently qualified models could delineate the mandibular canal in relation to an impacted third molar on panoramic radiographs using a segmentation technique. Transfer learning appears to be an effective method for creating such models using a relatively small number of data sets.
Asunto(s)
Aprendizaje Profundo , Canal Mandibular , Tercer Molar , Diente Impactado , Humanos , Canal Mandibular/diagnóstico por imagen , Tercer Molar/diagnóstico por imagen , Radiografía Panorámica , Diente Impactado/diagnóstico por imagen , Radiografía Dental DigitalRESUMEN
This article aimed to achieve a better understanding of cementum hyperplasia in the maxillary second molars lost due to periodontitis. Six maxillary second molars with hypercementosis were measured for the mineral concentration using micro-computed tomography and calcium element distributions using electron microprobe analysis. Calcium was distributed throughout the cementum, although the mineral concentration differed based on the cementum depth. The hyperplastic cementum was of the extrinsic fiber-rich cellular mixed stratified type. These results have implications for future studies aiming to diagnose hypercementosis. Further studies are needed to investigate the composition of the cementum matrix.