Heavy metal background levels and pollution temporal trend assessment within the marine sediments facing a brownfield area (Gulf of Pozzuoli, Southern Italy).

In this study, site-specific natural background levels (NBLs) were determined for 18 elements (Al, As, Be, Cd, Co, Cu, Cr, Fe, Hg, K, Mn, Mo, Ni, Pb, Tl, U, V, and Zn) in two sediment cores collected offshore the Bagnoli-Coroglio brownfield site (Gulf of Pozzuoli, southern Italy) to accurately assess the degree of contamination and the historical trends in Heavy Metals (HMs) enrichment. This objective was pursued taking in account the high temporal and spatial variability of the geochemical properties of the area due to the local geothermal activity. Moreover, the temporal variation of Polycyclic Aromatic Hydrocarbons (PAHs) was investigated.226Ra was used as an extraordinary marker to confirm 210Pb dating. It especially allowed defining the geochronological framework of the sediment core closer the brownfield up to around 1500, providing compelling support to correlate the investigated elements' occurrences with natural geogenic dynamic. Sediment samples were accurately dated and analyzed for chemical and particle size composition. The contamination factor (Cf) and the pollution load index (PLI) showed very high enrichment of Cd, Cu, Hg, Pb, and Zn. The contamination profiles of HMs and PAHs follow the same pattern in both sediment cores, increasing from deep to upper layers. The highest contamination levels for HMs and PAHs were observed between 10 and 30 cm, corresponding to the periods of most intense industrial activity. Decreasing trends of pollutants were observed in the surface layers (0-10 cm), probably affected by a natural attenuation process due to the cessation of industrial activities.

Gathering new knowledge from existing monitoring dataset of Campania marine coastal area (Southern Italy).

In this study we propose, a multi-step strategy of selection and characterization of long-term dataset of contaminant concentrations in different environmental matrices (i.e., water and sediment). Starting from a high quality and homogeneous dataset of chemical parameters, a selection of a usable refined dataset followed by statistical characterization and hazard assessment was performed. The database of chemical contamination data from monitoring activities in the coastal marine water area of the Campania Region (Italy) produced by the Regional Agency for Environmental Protection of Campania (ARPAC) between 2013 and 2019 was utilized. Descriptive and multivariate statistics were applied to the extracted data subset to describe spatial variability and to investigate the relationships between matrices and contaminants. In addition, the impact on the sediment matrix was considered using the contamination factor (Cf), the sediment quality guidelines (SQG), and the probability of exceedance (PoE) of given thresholds for metals and organic compounds. The results highlighted the main anthropogenic pressures between the Gulf of Pozzuoli and the Gulf of Napoli, and the potential hazard posed in particular by metals (i.e., Pb, C, and Hg), TBT, and PAHs. A wide range of As concentration along the Campania coastline and Ni occurrence in the southern part of the region, mainly attributable to geogenic origin, was also evidenced. This approach allows extracting new knowledge from large dataset systematically collected by ARPAC monitoring activity, to support possible actions of contamination control and mitigation.

Heavy metal content and potential ecological risk assessment of sediments from Khnifiss Lagoon National Park (Morocco).

Coastal lagoons are important but sensitive environments, being transitional zones between land and sea. The Khnifiss lagoon is the most important desert wetland in Morocco, but little data have been produced concerning heavy metal geochemistry and enrichments in the sediments. Therefore, 26 surface sediments (15 intertidal and 11 subtidal) and 2 sediment cores were collected in 2016 and analyzed for a selection of heavy metals. The data were processed to assess the degree of contamination and the corresponding potential ecological risk, using several accumulation/enrichment indices, and the singular and multi-metal risk indices. Mean concentrations in the bottom layers of the two cores, dating from a pre-industrial age according to geochronological analysis, were used as the local geochemical background. The resulting values were on the whole lower than those reported for other areas of the northeastern coast of Morocco. Multivariate statistics were also applied to better understand relationships among variables (metals and other geochemical parameters) and to reveal similarities among sample groups. The results showed that, although the lagoon is not yet affected by significant anthropogenic influences, small enrichments can be recognized, especially for Ni and Cd. The cause may be related to the proximity to the main national highway, the vehicles and machinery used in the saltworks located in the area, and the small harbors used principally for fishing. In addition, industrial emissions from the Atlantic coast of Morocco and adjacent countries can be reasonably attributed as additional contributors to the enrichments. In terms of potential ecological risk, Cd shows the greatest impact compared to the other metals investigated.

Integrated characterization and risk management of marine sediments: The case study of the industrialized Bagnoli area (Naples, Italy).

The aim of the present work is to demonstrate the practical importance of a multidisciplinary approach and weighted criteria to synthesize and integrate different typologies of data (or lines of evidence, LOEs), including chemical levels in marine sediments, their bioavailability to specific indicator species, ecotoxicological effects measured through subcellular biomarkers and batteries of bioassays, and potential impacts of pollution on local benthic communities. The area of Bagnoli (Gulf of Naples, Southern Italy) was selected as a model case-study, as it is a coastal area chronically impacted by massive industrial contamination (trace metals and hydrocarbons), and dismissed decades ago without any subsequent remediation or habitat restoration. The results of each LOE were elaborated to provide specific hazard indices before their overall integration in a weight of evidence (WOE) evaluation. Levels of some trace metals and PAHs revealed a severe contamination in the entire study area. Bioavailability of hydrocarbons was evident particularly for high molecular weight PAHs, which also caused significant variations of cellular biomarkers, such as cytochrome P450 metabolization in fish, lysosomal membrane destabilization in mussels, genotoxic effects both in fish and molluscs. The results of a battery of bioassays indicated less marked responses compared to those obtained from chemical and biomarkers analyses, with acute toxicity still present in sediments close to the source of contamination. The analysis of benthic assemblages showed limited evidence of impact in the whole area, indicating a good functioning of local ecosystems at chronic contamination. Overall, the results of this study confirm the need of combining chemical and biological data, the quantitative characterization of various typologies of hazard and the importance of assessing an integrated environmental WOE risk, to orientate specific and scientifically-supported management options in industrialized areas.

Circular economy and environmental health in low- and middle-income countries.

BACKGROUND: The circular economy framework for human production and consumption is an alternative to the traditional, linear concept of 'take, make, and dispose'. Circular economy (CE) principles comprise of 'design out waste and pollution', 'retain products and materials in use', and 'regenerate natural systems'. This commentary considers the risks and opportunities of the CE for low- and middle-income countries (LMICs) in the context of the Sustainable Development Goals (SDGs), acknowledging that LMICs must identify their own opportunities, while recognising the potential positive and negative environmental health impacts. MAIN BODY: The implementation of the CE in LMICs is mostly undertaken informally, driven by poverty and unemployment. Activities being employed towards extracting value from waste in LMICs are imposing environmental health risks including exposure to hazardous and toxic working environments, emissions and materials, and infectious diseases. The CE has the potential to aid towards the achievement of the SDGs, in particular SDG 12 (Responsible Consumption and Production) and SDG 11 (Sustainable Cities and Communities). However, since SDG 3 (Good Health and Well-Being) is critical in the pursuit of all SDGs, the negative implications of the CE should be well understood and addressed. We call on policy makers, industry, the health sector, and health-determining sectors to address these issues by defining mechanisms to protect vulnerable populations from the negative health impacts that may arise in LMICs as these countries domesticate the CE. CONCLUSION: Striving towards a better understanding of risks should not undermine support for the CE, which requires the full agency of the public and policy communities to realise the potential to accelerate LMICs towards sustainable production and consumption, with positive synergies for several SDGs.

Toxicity of the readily leachable fraction of urban PM2.5 to human lung epithelial cells: Role of soluble metals.

Fine airborne particulate matter (PM2.5) has been repeatedly associated with adverse health effects in humans. The PM2.5 soluble fraction, and soluble metals in particular, are thought to cause lung damage. Literature data, however, are not consistent and the role of leachable metals is still under debate. In this study, Winter and Summer urban PM2.5 aqueous extracts, obtained by using a bio-compatible solution and different contact times at 37 °C, were used to investigate cytotoxic effects of PM2.5 in cultured lung epithelial cells (A549) and the role played by the leachable metals Cu, Fe, Zn, Ni, Pb and Cd. Cell viability and migration, as well as intracellular glutathione, extracellular cysteine, cysteinylglycine and homocysteine concentrations, were evaluated in cells challenged with both PM2.5 extracts before and after ultrafiltration and artificial metal ion solutions mimicking the metal composition of the genuine extracts. The thiol oxidative potential was also evaluated by an abiotic test. Results demonstrate that PM2.5 bioactive components were released within minutes of PM2.5 interaction with the leaching solution. Among these are i) low MW (<3 kDa) solutes inducing oxidative stress and ii) high MW and/or water-insoluble compounds largely contributing to thiol oxidation and to increased homocysteine levels in the cell medium. Cu and/or Ni ions likely contributed to the effects of Summer PM2.5 extracts. Nonetheless, the strong bio-reactivity of Winter PM2.5 extracts could not be explained by the presence of the studied metals. A possible role for PM2.5 water-extractable organic components is discussed.

A field screening test for the assessment of concentrations and mobility of potentially toxic elements in soils: a case study on urban soils from Rome and Novi Sad.

The increasing demand for environmental pollution control results in the development and use of new procedures for the determination of dangerous chemicals. Simple screening methods, which can be used directly in the field for a preliminary assessment of soil contamination, seem to be extremely advantageous. In our laboratory, we developed and optimized a rapid test for a preliminary evaluation of both the concentration and the mobility of some potentially toxic metals in soils. This screening test consists of a single extraction of the soil sample with a buffer solution, followed by the titration of the extracted solution with dithizone to determine the contents of bi-valent heavy metals (such as Pb, Cu, Zn, and Cd). This screening method was then directly applied in the field during the sampling campaign in the framework of an Italian-Serbian collaborative project, finalized in the study of metal availability in soils. The results obtained in the field with the rapid test were compared with those obtained in the laboratory following the conventional procedure commonly used to evaluate metal bioavailability (diethylenetriaminepentaacetic extraction). Moreover, selected samples were analyzed sequentially in the laboratory using the standardized BCR three-step sequential extraction procedure. The screening test gave results conceptually in good agreement with those obtained via the BCR procedure. These preliminary data show that the proposed screening test is a reliable method for the preliminary rapid evaluation of metal total concentrations and of potential metal mobility in soils, supporting sampling activities directly in the field.

Zinc Oxide Nanorods-Decorated Graphene Nanoplatelets: A Promising Antimicrobial Agent against the Cariogenic Bacterium Streptococcus mutans.

Nanomaterials are revolutionizing the field of medicine to improve the quality of life due to the myriad of applications stemming from their unique properties, including the antimicrobial activity against pathogens. In this study, the antimicrobial and antibiofilm properties of a novel nanomaterial composed by zinc oxide nanorods-decorated graphene nanoplatelets (ZNGs) are investigated. ZNGs were produced by hydrothermal method and characterized through field-emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDX) and X-ray diffraction (XRD) techniques. The antimicrobial activity of ZNGs was evaluated against Streptococcus mutans, the main bacteriological agent in the etiology of dental caries. Cell viability assay demonstrated that ZNGs exerted a strikingly high killing effect on S. mutans cells in a dose-dependent manner. Moreover, FE-SEM analysis revealed relevant mechanical damages exerted by ZNGs at the cell surface of this dental pathogen rather than reactive oxygen species (ROS) generation. In addition, inductively coupled plasma mass spectrometry (ICP-MS) measurements showed negligible zinc dissolution, demonstrating that zinc ion release in the suspension is not associated with the high cell mortality rate. Finally, our data indicated that also S. mutans biofilm formation was affected by the presence of graphene-zinc oxide (ZnO) based material, as witnessed by the safranin staining and growth curve analysis. Therefore, ZNGs can be a remarkable nanobactericide against one of the main dental pathogens. The potential applications in dental care and therapy are very promising.

Beryllium natural background concentration and mobility: a reappraisal examining the case of high Be-bearing pyroclastic rocks.

Beryllium is widely distributed in soils at low levels, but it can also occur naturally in higher concentrations in a variety of materials exploited for many industrial applications. Beryllium is also one of the most toxic natural elements and is known to be a human carcinogen. A concise account of the literature data on baseline concentrations of Be in soils illustrates the possibility of worldwide presence of areas with a high natural background concentration of Be (up to 300 mg/kg), the crustal abundance of which is generally estimated to be in the range 2-6 mg/kg. Nevertheless, the number of available data is rather limited in comparison with those about other toxic elements such as Pb, Cd and Cr. This has probably caused the choice of low values of concentration level as the reference for the definition of soil contamination: these values are not always realistic and are not applicable to large areas. As a case study, we report and analyse a diffuse, unusually high (up to 80 mg/kg, average approximately 20 mg/kg), natural occurrence of beryllium in loose and poorly consolidated pyroclastic layers related to the Pleistocene activity of the Vico volcano. Additionally, the analysis of Be leachability has been carried out, providing evidence of a not negligible mobility in contrast with the scarce data presented in the literature that usually indicate beryllium as an element with low mobility in oxidising surface environmental conditions. This research marks the beginning of a possible reappraisal of beryllium geochemical behaviour and background levels, providing more realistic reference values for risk assessment and land management.