Controlled Release of the Anticancer Drug Cyclophosphamide from a Superparamagnetic ß-Cyclodextrin Nanosponge by Local Hyperthermia Generated by an Alternating Magnetic Field.

A ß-cyclodextrin (ß-CD) nanosponge (NS) was synthesized using diphenyl carbonate (DPC) as a cross-linker to encapsulate the antitumor drug cyclophosphamide (CYC), thus obtaining the NSs-CYC system. The formulation was then associated with magnetite nanoparticles (MNPs) to develop the MNPs-NSs-CYC ternary system. The formulations mentioned above were characterized to confirm the deposition of the MNPs onto the organic matrix and that the superparamagnetic nature of the MNPs was preserved upon association. The association of the MNPs with the NSs-drug complex was confirmed through field emission scanning electron microscopy, energy dispersive spectroscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, dynamic light scattering, ζ-potential, atomic absorption spectroscopy, X-ray powder diffraction, selected area electron diffraction, and vibrating-sample magnetometer. The superparamagnetic properties of the ternary system allowed the release of CYC by utilizing magnetic hyperthermia upon the exposure of an alternating magnetic field (AMF). The drug release experiments were carried out at different frequencies and intensities of the magnetic field, complying with the "Atkinson-Brezovich criterion". The assays in AMF showed the feasibility of release by controlling hyperthermia of the drug, finding that the most efficient conditions were F = 280 kHz, H = 15 mT, and a concentration of MNPs of 5 mg/mL. CYC release was temperature-dependent, facilitated by local heat generation through magnetic hyperthermia. This phenomenon was confirmed by DFT calculations. Furthermore, the ternary systems outperformed the formulations without MNPs regarding the amount of released drug. The MTS (3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl)-2H-tetrazolium) assays demonstrated that including CYC within the magnetic NS cavities reduced the effects on mitochondrial activity compared to those observed with the free drug. Finally, the magnetic hyperthermia assays showed that the tertiary system allows the generation of apoptosis in HeLa cells, demonstrating that the MNPs embedded maintain their properties to generate hyperthermia. These results suggest that using NSs associated with MNPs could be a potential tool for a controlled drug delivery in tumor therapy since the materials are efficient and potentially nontoxic.

Two-step access to bis-meso-perfluoroalkyl-corroles towards meso-perfluoroacyl-ABC-corroles.

A solventless and acid-catalyzed condensation of meso-perfluoroalkyl-dipyrromethanes with selected benzaldehydes was used to prepare ten different bilanes that were isolated before their oxidation into trans-A2B-corroles bearing two meso-perfluoroalkyl groups. Macrocycles bearing long chains (C3F7 or C7F15) are key precursors to afford ABC-corroles having a meso-acyl substituent when subjected to a mild and basic hydrolysis affecting one of the alkyl substituents.

Interaction mechanism of water-soluble inorganic arsenic onto pristine nanoplastics.

Nanoplastics (NPLs) persist in aquatic habitats, leading to incremental research on their interaction mechanisms with metalloids in the environment. In this regard, it is known that plastic debris can reduce the number of water-soluble arsenicals in contaminated environments. Here, the arsenic interaction mechanism with pure NPLs, such as polyethylene terephthalate (PET), aliphatic polyamide (PA), polyvinyl chloride (PVC), polyethylene (PE), polypropylene (PP), and polystyrene (PS) is evaluated using computational chemistry tools. Our results show that arsenic forms stable monolayers on NPLs through surface adsorption, with adsorption energies of 9-24 kcal/mol comparable to those on minerals and composite materials. NPLs exhibit varying affinity towards arsenic based on their composition, with As(V) adsorption showing higher stability than As(III). The adsorption mechanism results from a balance between electrostatics and dispersion forces (physisorption), with an average combined contribution of 87%. PA, PET, PVC, and PS maximize the electrostatic effects over dispersion forces, while PE and PP maximize the dispersion forces over electrostatic effects. The electrostatic contribution is attributed to hydrogen bonding and the activation of terminal O-C, C-H, and C-Cl groups of NPLs, resulting in several pairwise interactions with arsenic. Moreover, NPLs polarity enables high mobility in aqueous environments and fast mass transfer. Upon adsorption, As(III) keeps the NPLs polarity, while As(V) limits subsequent uptake but ensures high mobility in water. The solvation process is destabilizing, and the higher the NPL polarity, the higher the solvation energy penalty. Finally, the mechanistic understanding explains how temperature, pressure, pH, salinity, and aging affect arsenic adsorption. This study provides reliable quantitative data for sorption and kinetic experiments on plastic pollution and enhances our understanding of interactions between water contaminants.

Computational Insights on the Chemical Reactivity of Functionalized and Crosslinked Polyketones to Cu2+ Ion for Wastewater Treatment.

Today, the high concentrations of copper found in water resources result in an urgent problem to solve since human health and aquatic ecosystems have been affected. Functionalized crosslinked polyketone resins (XLPK) have demonstrated high performance for the uptake of heavy metals in water solutions. In addition, its green chemical synthesis makes these resins very attractive as sorbents for metal ions contained in wastewater. XLPK are not soluble in aqueous media and do not require any catalyst, solvent, or harsh conditions to carry out the uptake process. In this paper, a series of functionalized XLPK with pending amino-derivatives namely; butylamine (BA), amino 2-propanol (A2P), 4-(aminomethyl) benzoic acid (HAMC), 6-aminohexanoic acid (PAMBA), and 1,2 diamino propane (DAP) directly attached to the pyrrole backbone of the polymers and crosslinked by di-amine derivatives was investigated using Density Functional Theory (DFT) calculations. Our computational analysis revealed that dipole-dipole interactions played a crucial role in enhancing the adsorption of Cu2+ ions onto XLPKs. The negatively charged ketone moieties and functional groups within XLPKs were identified as key adsorption sites for the selective binding of Cu2+ ions. Additionally, we found that XLPKs exhibited strong electrostatic interactions primarily through the -NH2 and -C=O groups. Evaluation of the adsorption energies in XLPK-Cu(II) complexes showed that the DAP-Cu(II) complex exhibited the highest stability, attributed to strong Cu(II)-N binding facilitated by the amino moiety (-NH2). The remaining XLPKs displayed binding modes involving oxygen atoms (Cu(II)-O) within the ketone moieties in the polymer backbone. Furthermore, the complexation and thermochemical analysis emphasized the role of the coordinator atom (N or O) and the coordinating environment, in which higher entropic effects involved in the adsorption of Cu2+ ions onto XLPKs describes a lower spontaneity of the adsorption process. The adsorption reactions were favored at lower temperatures and higher pressures. These findings provide valuable insights into the reactivity and adsorption mechanisms of functionalized and crosslinked polyketones for Cu2+ uptake, facilitating the design of high-performance polymeric resins for water treatment applications.

Interaction mechanism of triclosan on pristine microplastics.

Urban wastewaters comprise different hydrophobic pollutants such as microplastics (MPs), pharmaceuticals, and personal care products. Among these pollutants, triclosan (TCS) shows a worrying interaction ability with MPs; recent studies show MPs serve as a vector between TCS and aquatic environments, whose interaction is still being studied to understand their combined toxicity and transport ability. Using computational chemistry tools, this work evaluates the TCS-MPs interaction mechanism, including pristine polymers, i.e., aliphatic polyamides (PA), polyethylene (PE), polystyrene (PS), polyvinyl chloride (PVC), and polyethylene terephthalate (PET). Our results show that TCS adsorption on MPs solely occurs via physisorption, where PA reaches the higher adsorption ability. Remarkably, MPs reach higher or comparable adsorption stability than carbon-based materials, boron nitrides, and minerals, indicating their worrying transport properties. Also, the adsorption capacity is strongly influenced by entropy changes rather than thermal effects, which determine the different sorption capacities among polymers and agree well with reported sorption capacities from adsorption kinetic experiments in the literature. MPs show a polar and highly susceptible surface to establish electrostatics and dispersion effects on TCS. Accordingly, the TCS-MPs interaction mechanism arises from the interplay between electrostatics and dispersion forces, with a combined contribution of 81-93 %. Specifically, PA and PET maximize the electrostatic effects, while PE, PP, PVC, and PS maximize the dispersion effects. From the chemical viewpoint, TCS-MPs complexes interact by a series of pairwise interactions such as Van der Waals, hydrogen bonding, C-H⋯π, C-H⋯C-H, C-Cl⋯C-H, and C-Cl⋯Cl-C. Finally, the mechanistic information explains the effects of temperature, pressure, aging, pH, and salinity on TCS adsorption. This study quantitatively elucidates the interaction mechanism of TCS-MP systems, which were hard to quantify to date, and explains the TCS-MPs sorption performance for sorption/kinetic studies.

The unfolded protein response transcription factor XBP1s ameliorates Alzheimer's disease by improving synaptic function and proteostasis.

Alteration in the buffering capacity of the proteostasis network is an emerging feature of Alzheimer's disease (AD), highlighting the occurrence of endoplasmic reticulum (ER) stress. The unfolded protein response (UPR) is the main adaptive pathway to cope with protein folding stress at the ER. Inositol-requiring enzyme-1 (IRE1) operates as a central ER stress sensor, enabling the establishment of adaptive and repair programs through the control of the expression of the transcription factor X-box binding protein 1 (XBP1). To artificially enforce the adaptive capacity of the UPR in the AD brain, we developed strategies to express the active form of XBP1 in the brain. Overexpression of XBP1 in the nervous system using transgenic mice reduced the load of amyloid deposits and preserved synaptic and cognitive function. Moreover, local delivery of XBP1 into the hippocampus of an 5xFAD mice using adeno-associated vectors improved different AD features. XBP1 expression corrected a large proportion of the proteomic alterations observed in the AD model, restoring the levels of several synaptic proteins and factors involved in actin cytoskeleton regulation and axonal growth. Our results illustrate the therapeutic potential of targeting UPR-dependent gene expression programs as a strategy to ameliorate AD features and sustain synaptic function.

Mechanistic insights into the adsorption of endocrine disruptors onto polystyrene microplastics in water.

Microplastics and endocrine disruptors (EDs) are contaminants of emerging concerns and ubiquitously present in aquatic ecosystems, establishing interactions that still are the subject of investigation due to their implications in the cotransport of pollutants. Then, we conducted mechanistic studies based on state-of-art computational chemistry methods to quantitatively understand the interaction mechanisms whereby polystyrene micro or nanoplastics (PS-MPs) interact with representative classes of EDs in water (Ethynylestradiol, Estradiol, and Bisphenol A). The results showed that PS-MPs increase their charge distribution when forming microparticles in water, giving a permanent dipole that explains their increasing solubility in aqueous conditions. In agreement with experimental assessments, the PS-MPs favorably adsorb EDs with adsorption energies larger than 15 kcal/mol, even with comparable stability to nanostructured materials for adsorption, removal, and/or analysis of pollutants. The adsorption occurs via physisorption without covalent binding, bond breaking, or structural preparation energies, where the molecular structure of EDs can favor inner or outer surface adsorption depending on the molecular structure of the adsorbates. A balanced contribution of dispersion and electrostatic stabilizing effects determines the interaction mechanisms, accounting for a whole contribution of 88-90%. The electrostatic contribution emerges from the favorable alignment of the PS-MPs and EDs dipoles upon interaction due to the mild charge transfer between them in solution. In contrast, the dispersion contribution emerges from electron-electron interactions due to the permanent dipoles in adsorbates and adsorbents. Furthermore, thermochemical analyses clarify the role of temperature and pressure effects on the relative adsorption stability among EDs in aquatic environments. Therefore, modeling the adsorption process contributes to new knowledge on the sorption properties of PS-MPs, providing a mechanistic basis to understand the cotransport of pollutants in water environments and their impacts on environmental pollution.

Deciphering Electronic and Structural Effects in Copper Corrole/Graphene Hybrids.

Non-covalent hybrid materials based on graphene and A3 -type copper corrole complexes were computationally investigated. The corroles complexes contain strong electron-withdrawing fluorinated substituents at the meso positions. Our results show that the non-innocent character of corrole moiety modulates the structural, electronic, and magnetic properties once the hybrid systems are held. The graphene-corrole hybrids displayed outstanding stability via the interplay of dispersion and electrostatic driving forces, while graphene act as an electron reservoir. The hybrid structures exposed an intriguing magneto-chemical performance, compared to the isolated counterparts, that evidenced how structural and electronic effects contributed to the magnetic response for both ferromagnetic and antiferromagnetic cases. Directional spin polarization and spin transfer from the corrole to the graphene surface participate in the amplification. Finally, there are relations between the spin transfer, the magnetic response, and the copper distorted ligand field, offering exciting hints about modulating the magnetic response. Therefore, this work shows that copper corroles emerged as versatile building blocks for graphene hybrid materials, especially in applications requiring a magnetic response.

Atmospheric microplastics and nanoplastics as vectors of primary air pollutants - A theoretical study on the polyethylene terephthalate (PET) case.

Polyethylene terephthalate (PET) microplastics and nanoplastics are ubiquitously present in the atmosphere as atmospheric and airborne forms (PET-aMPs). Using first-principles calculations, we analyze the uptake of primary air pollutants onto PET-aMPs, focusing on their stabilities, adsorption mechanisms, and thermochemistry. The results show that PET-aMPs are selective for the spontaneous adsorption of CO, CO2, NO, N2O, NO2, NH3, and SO2, reaching stable adsorption energies of 6-20 kcal/mol per molecule, with comparable uptake ability than carbon-based materials, metals/metalloids, and metal oxide surfaces. Then, PET-aMPs become a vector for coexisting air pollutants in the atmosphere, which adsorb by inner or outer adsorption depending on the molecular polarity (dipole moment) and atomic constitution (electronegativity) of gaseous molecules. Also, atmospheric H2O and O2 are not competitive molecules, and ozone could enhance adsorption due to surface oxidation and structure breakdown. The interplay of electrostatic (46-61%) and dispersion forces (21-58%) drives the adsorption mechanism, where low-polar pollutants display almost a balanced electrostatic vs. dispersion contribution, while high polar molecules display a higher electrostatic stabilization. The outer adsorption is reached by strong dispersion, hydrogen bonding, and dipole-dipole-induced pairs, while lone-pair-π interactions appear in the inner adsorption regime. These results expand the understanding of the hazards and risks of atmospheric and airborne microplastics/nanoplastics, their impacts, co-transport ability, and interaction with the environment.

The interaction mechanism of polystyrene microplastics with pharmaceuticals and personal care products.

Microplastics (MPs) have been detected in the hydrosphere, with hazardous implications in transporting coexisting water pollutants. Our knowledge about the interaction mechanisms that MPs establish with organic pollutants are still growing, which is essential to understand the adsorption properties of MPs and their relative stability with adsorbates. Here, we used classical (force field methods) and ab-initio (density functional theory) computational chemistry tools to characterize the interaction mechanisms between Polystyrene-MPs (PS-MPs) and pharmaceuticals/personal care products (PPCPs). Adsorption conformations and energies, thermochemistry, binding, and energy decomposition analyses were performed to obtain the quantitative mechanistic information. Our results show that PS-MPs have permanent dipoles, increasing the interaction with neutral PPCPs while repelling the charged pollutants; in all cases, a stable physisorption takes place. Moreover, PS-MPs increase their solubility upon pollutant adsorption due to an increase in the dipole moment, increasing their co-transport ability in aqueous environments. The stability of the PS-MPs/PPCPs complexes is further confirmed by thermochemical and molecular dynamics trajectory analysis as a function of temperature and pressure. The interaction mechanism of high pKa pollutants (pKa > 5) is due to a balanced contribution of electrostatic and dispersion forces, while the adsorption of low pKa pollutants (pKa < 5) maximizes the electrostatic forces, and steric repulsion effects explain their relative lower adsorption stability. In this regard, several pairwise intermolecular interactions are recognized as a source of stabilization in the PS-MPs/PPCPs binding: hydrogen bonding, π-π, OH⋯π, and CH⋯π, CCl⋯CH and CH⋯CH interactions. The ionic strength in solution slightly affects the adsorption stability of neutral PPCPs, while the sorption of charged pollutants is enhanced. This mechanistic information provides quantitative data for a better understanding of the interactions between organic pollutants and MPs, serving as valuable information for sorption/kinetic studies.

Elucidating the co-transport of bisphenol A with polyethylene terephthalate (PET) nanoplastics: A theoretical study of the adsorption mechanism.

Polyethylene terephthalate (PET) is a possible key component of nanoplastics in water environments, which can migrate pollutants through co-transport. In this regard, the co-transport of endocrine disruptors (such as bisphenol A, BPA) by nanoplastics is of emergent concern because of its cytotoxicity/bioaccumulation effects in aquatic organisms. In this work, a computational study is performed to reveal the BPA adsorption mechanism onto PET nanoplastics (nanoPET). It is found that the outer surface of nanoPET has a nucleophilic nature, allowing to increase the mass transfer and intraparticle diffusion into the nanoplastic to form stable complexes by inner and outer surface adsorption. The maximum adsorption energy is similar (even higher) in magnitude with respect to nanostructured adsorbents such as graphene, carbon nanotubes, activated carbon, and inorganic surfaces, indicating the worrying adsorption properties of nanoPET. The adsorption mechanism is driven by the interplay of dispersion (38-49%) and electrostatics effects (43-50%); specifically, dispersion effects dominate the inner surface adsorption, while electrostatics energies dominate the outer surface adsorption. It is also determined that π-π stacking is not a reliable interaction mechanism for aromatics on nanoPET. The formed complexes are also highly soluble, and water molecules behave as non-competitive factors, establishing the high risk of nanoPET to adsorb and migrate pollutants in water ecosystems. Furthermore, the adsorption performance is decreased (but not inhibited) at high ionic strength in salt-containing waters. Finally, these results give relevant information for environmental risk assessment, such as quantitative data and interaction mechanisms for non-biodegradable nanoplastics that establish strong interactions with pollutants in water.

Data of interaction of supported ionic liquids phases onto copper nanoparticles: A density functional theory study.

This work contains data on the computational, structural, and electronic characterization of supported ionic liquids phases anchored to copper nanoparticles using Density Functional theory calculations. The data supplement the paper "Interaction of supported ionic liquids phases onto copper nanoparticles: A Density Functional Theory study" [1], based on the adsorption of ionic liquid onto a Cu nanoparticle is analyzed from a chemical and physical point of view. The chemical analysis is based on Atoms in Molecule theory (AIM) and allows us to differentiate the chemical binding nature between ionic liquid and copper nanoparticle. On the other hand, the energy decomposition analysis based on absolutely localized molecular orbital (ALMO-EDA) describes the physical contributions that govern the interaction between ionic liquid and the copper nanoparticles. Herein, detailed and extended information in the synthesis and computational characterization are presented.

Novel TRPV1 Channel Agonists With Faster and More Potent Analgesic Properties Than Capsaicin.

The transient receptor potential vanilloid 1 (TRPV1) ion channel is a member of the family of Transient Receptor Potential (TRP) channels that acts as a molecular detector of noxious signals in primary sensory neurons. Activated by capsaicin, heat, voltage and protons, it is also well known for its desensitization, which led to the medical use of topically applied TRPV1 agonist capsaicin for its long-lasting analgesic effects. Here we report three novel small molecules, which were identified using a Structure-Based Virtual Screening for TRPV1 from the ZINC database. The three compounds were tested using electrophysiological assays, which confirmed their capsaicin-like agonist activity. von Frey filaments were used to measure the analgesic effects of the compounds applied topically on tactile allodynia induced by intra-plantar carrageenan. All compounds had anti-nociceptive activity, but two of them showed faster and longer lasting analgesic effects than capsaicin. The present results suggest that TRPV1 agonists different from capsaicin could be used to develop topical analgesics with faster onset and more potent effects.

Exploring the Nature of Interaction and Stability between Water-Soluble Arsenic Pollutants and Metal-Phosphorene Hybrids: A Density Functional Theory Study.

To search for new uptake platforms for the removal of highly toxic and mobile arsenite [or trivalent arsenic, As(OH)3], we theoretically investigate the adsorption properties of intrinsic and metal-doped phosphorene nanoadsorbents. The doping of phosphorene with Ni or Cu atoms remarkably increases the uptake stability of arsenite at water environments compared to intrinsic phosphorene, with a weak competition of H2O molecules by the adsorption sites, where the adatom doping of phosphorene allows obtaining better uptake performance compared to the substitutional doping. The uptake is explained by a strong inner-sphere surface complexation, which is dominated by permanent electrostatic physical effects. Hydroxide anions show strong competitive adsorption compared to H2O and arsenite; thus, the straightforward recovery of the nanoadsorbents could be reached after removal by treatment at high pH solutions. Therefore, metal-doped phosphorene hybrids could serve as superior nanoadsorbents for arsenic separation from water by adsorption in solid phases.

Highly modulated supported triazolium-based ionic liquids: direct control of the electronic environment on Cu nanoparticles.

A series of new triazolium-based supported ionic liquids (SILPs), decorated with Cu NPs, were successfully prepared and applied to the N-arylation of aryl halides with anilines. The triazoles moieties were functionalised using copper-catalysed azide-alkyne cycloaddition. SILP surface characterisation showed a strong correlation between the triazolium cation volume and textural properties. STEM images showed well-dispersed Cu NPs on SILPs with a mean diameter varying from 3.6 to 4.6 nm depending on the triazolium cation used. Besides, XPS results suggest that the Cu(0)/Cu(i) ratio can be modulated by the electronic density of triazolium substituents. XPS and computational analysis gave mechanistic insights into the Cu NP stabilisation pathways, where the presence of electron-rich groups attached to a triazolium ring plays a critical role in leading to a cation adsorption pathway (E ads = 72 kcal mol-1). In contrast, less electron-rich groups favour the anion adsorption pathway (E ads = 63 kcal mol-1). The Cu@SILP composite with electron-rich groups showed the highest activity for the C-N Ullmann coupling reaction, which suggests that electron-rich groups might act as an electron-like reservoir to facilitate oxidative addition for N-arylation. This strategy firmly suggests the strong dependence of the nature of triazolium-based SILPs on the Cu NP surface active sites, which may provide a new environment to confine and stabilise MNPs for catalytic applications.

Correction: Highly modulated supported triazolium-based ionic liquids: direct control of the electronic environment on Cu nanoparticles.

[This corrects the article DOI: 10.1039/D0NA00055H.].

Effect of Chemical Order in the Structural Stability and Physicochemical Properties of B12N12 Fullerenes.

The effect of chemical order in the structural and physicochemical properties of B12N12 [4,6]-fullerene (BNF) isomers was evaluated using density functional theory and molecular dynamic calculations. The feasibility to find stable BNF isomers with atomic arrangement other than the well-known octahedral Th-symmetry was explored. In this study, the number of homonuclear bonds in the modeled nanostructures was used as categorical parameter to describe and quantify the degree of structural order. The BNF without homonuclear bonds was identified as the most energetically favorable isomer. However, a variety of BNF arrays departing from Th-symmetry was determined as stable structures also. The calculated vibrational spectra suggest that isomers with chemical disorder can be identified by infrared spectroscopy. In general, formation of homonuclear bonds is possible meanwhile the entropy of the system increases, but at expense of cohesive energy. It is proposed that formation of phase-segregated regions stablishes an apparent limit to the number of homonuclear bonds in stable B12N12 fullerenes. It was found that formation of homonuclear bonds decreases substantially the chemical hardness of BNF isomers and generates zones with large charge density, which might act as reactive sites. Moreover, chemical disorder endows BNF isomers with a permanent electric dipole moment as large as 3.28 D. The obtained results suggest that by manipulating their chemical order, the interaction of BNF's with other molecular entities can be controlled, making them potential candidates for drug delivery, catalysis and sensing.

Correction: A comparative study of Ir(iii) complexes with pyrazino[2,3-f][1,10]phenanthroline and pyrazino[2,3-f][4,7]phenanthroline ligands in light-emitting electrochemical cells (LECs).

Correction for 'A comparative study of Ir(iii) complexes with pyrazino[2,3-f][1,10]phenanthroline and pyrazino[2,3-f][4,7]phenanthroline ligands in light-emitting electrochemical cells (LECs)' by Iván González et al., Dalton Trans., 2015, 44, 14771-14781.

Interaction of H2O with (CuS)n, (Cu2S)n, and (ZnS)n small clusters (n = 1-4, 6): relation to the aggregation characteristics of metal sulfides at aqueous solutions.

The interaction of H2O onto small CuS, Cu2S, and ZnS clusters was theoretically studied by Density Functional Theory computations to get insights into the aggregation characteristics of metal sulfides at aqueous solutions. The results show the charge-controlled interactions with polarized solvent molecules are favored on the ZnS clusters compared with CuS and Cu2S clusters. Moreover, the chemical adsorption of H2O molecules is energetically favored onto ZnS clusters with higher interaction energies of up to 35.4 kcal/mol compared with CuS and Cu2S clusters (up to 31.3 kcal/mol), where the stability of H2O adsorption decreases as the size of the clusters increases. However, thermochemical analysis shows that the adsorption of H2O on copper sulfides is not a spontaneous process at room temperature. Additionally, the electrostatic energy of H2O onto the Cu2S and CuS clusters is lower than that associated with the H2O-H2O interactions, suggesting that copper precipitates prefer to bind between them at early stages of the precipitation process due to an unfavorable solvent-solute interaction. Dispersion forces play a relative key role in the interaction of water on copper sulfides, while for zinc sulfide clusters, the adsorption energy is slightly influenced by dispersion contributions. Accordingly, the aggregation of zinc sulfides in a water environment is expected to be lower compared with copper sulfides, and where the aggregation characteristics are not determined by the binding energy of the sulfides, but of the ability to interact with the solvent molecules. These statements were confirmed by experimental optical microscopy analysis and settling tests during precipitation processes in water. Therefore, this work allows proposing a simple strategy to study the aggregation characteristics of metal sulfides, which turns useful for use in hydrometallurgical applications.

Mechanistic details of ethylene polymerization reaction using methallyl nickel(ii) catalysts.

The mechanism of ethylene polymerization by means of neutral methallyl-Ni(ii) complexes has been studied by quantum chemical calculations. Two isomer complexes having different ligand functionalization at the ortho or para position, and co-activated with trispentafluorephenylborane [B(C6F5)3], were studied according to the Cossee-Arlman's mechanism. Comparison of the reaction mechanism of both isomers shows that energy barriers strongly depend on ligand-functionalization and are mostly due to structural rearrangements. In addition, it was found that para-functionalization can be distinguished by favorable σ-donation whereas ortho-functionalization is more prone to a π back-donation process. Our results concerning the polymerization process for ortho and para isomers not only provide a theoretical perspective of available experimental data, but also explain the experimentally observed higher molecular weight of the methallyl-Ni(ii) ortho isomer co-catalyzed by B(C6F5)3, revealing the role of ligand-functionalization in polyethylene production.