Fungal bioleaching of e-waste utilizing molasses as the carbon source in a bubble column bioreactor.

Mobile phones are known as the most widely used electronic instruments, and an enormous number of discarded mobile phones are generated. The present work used a pure culture of Penicillium simplicissimum in a bubble column bioreactor to extract Cu and Ni from mobile phone printed circuit boards (MPPCBs) waste. Molasses was used as an efficient carbon source to enhance bioleaching efficiency and increase the cost benefits. The adaptation phase was done at Erlenmeyer flasks to reach 40 g/L of MPPCBs powder. The most significant parameters, including the mass of MPPCBs powder, aeration, molasses concentration, and their interaction, were optimized in order to leach the maximum possible Cu and Ni using central composite design in response surface methodology (RSM). The model p-values for Cu and Ni recovery were 0.0030 and 0.0348, respectively, emphasizing the model's accuracy. 96.94% of Cu was recovered under 8.8% (v/v) of molasses, aeration rate of 0.29 (l/min), and MPPCBs powder of 10 g/L. The optimized condition of Ni leaching was 1.9% (v/v) of molasses, aeration rate of 0.37 (l/min), and MPPCBs powder of 10 g/L, resulting in 71.51% recovery. The present article demonstrated the great potential of P. simplicissimum to improve metal recovery from e-waste utilizing molasses and bubble column bioreactors.

Optimized bioleaching of copper by indigenous cyanogenic bacteria isolated from the landfill of e-waste.

In this study, indigenous cyanogenic bacterial strains were isolated on nutrient, minimal salt, and soil extract media at various culture conditions from two distinct landfills of e-waste, Iran. Based on their cyanide formation profiles, five most potent isolates were selected for optimization and to this end, the influence of the most effective factors on cyanide production including pH, glycine concentration and temperature were assessed using one-factor at a time method (OFAT). Initial pH of 7, glycine concentration of 2 g/L and temperature of 30°C were obtained as optimal conditions for most of the isolates. Additionally, two bioleaching processes were applied for each bacteria to detect the effect of optimal conditions on bioleaching and to assay their potential in the mobilization of copper. Under optimal conditions and pulp density of 1 g/L, copper recoveries were recorded as 96.73%, 82.49%, 81.17%, 41.72%, and 31.52% by S22, N13, N37, N23, and N41 respectively during 10 days which is approximately 1.5-5 times higher than the recovery obtained without optimization. During the optimization and the bioleaching process, the pH fluctuation of the flasks was monitored which validated the activity of the microorganisms.

Ni and Cu recovery by bioleaching from the printed circuit boards of mobile phones in non-conventional medium.

There is a substantial volume of mobile phone waste every year. Due to the disadvantages of traditional methods, it is necessary to look for biological processes that are more eco-friendly and economical to recover metals from e-waste. Fungi provide large amounts of organic acids and dissolve metals but using sucrose in the medium is not economical. In this paper, the main objective is to find a suitable alternative carbon substrate instead of sucrose for fungi bioleaching of Ni and Cu in printed circuit boards (PCBs) of mobile phones using Penicillium simplicissimum. Four kinds of carbon sources (including sucrose, cheese whey, sugar, and sugar cane molasses) were selected. Also, pH and number of spores in inoculum were optimized by response surface methodology (RSM) for all carbon sources. The results showed the simultaneous maximum recovery of Cu and Ni is not possible. For Cu recovery, sugar is the best economical and simplistic medium instead of sucrose. Maximum recovery of Cu (90%) gained at the pH of 7, 3.3 × 107 spores, and in sugar. The amount of Ni recovery (89%) was highest in molasses, at the pH of 2, and 106 spores. The results proved non-conventional carbon sources improve bioleaching efficiency and the possibility of industrialization.