3D Bioprinting Using Universal Fugitive Network Bioinks.

Three-dimensional (3D) bioprinting has emerged with potential for creating functional 3D tissues with customized geometries. However, the limited availability of bioinks capable of printing 3D structures with both high-shape fidelity and desired biological environments for encapsulated cells remains a key challenge. Here, we present a 3D bioprinting approach that uses universal fugitive network bioinks prepared by loading cells and hydrogel precursors (bioink base materials) into a 3D printable fugitive carrier. This approach constructs 3D structures of cell-encapsulated hydrogels by printing 3D structures using fugitive network bioinks, followed by cross-linking printed structures and removing the carrier from them. The use of the fugitive carrier decouples the 3D printability of bioinks from the material properties of bioink base materials, making this approach readily applicable to a range of hydrogel systems. The decoupling also enables the design of bioinks for the biological functionality of the final printed constructs without compromising the 3D printability. We demonstrate the generalizable 3D printability by printing self-supporting 3D structures of various hydrogels, including conventionally non-3D printable hydrogels and those with a low polymer content. We conduct preprinting screening of bioink base materials through 3D cell culture to select bioinks with high cell compatibility. The selected bioinks produce 3D constructs of cell-encapsulated hydrogels with both high-shape fidelity and high cell viability and proliferation. The universal fugitive network bioink platform could significantly expand 3D printable bioinks with customizable biological functionalities and the adoption of 3D bioprinting in diverse research and applied settings.

Chemical composition and antimicrobial activity of essential oils and various extracts of endemic Onosma malatyana (Boraginaceae) from Anatolia.

The chemical contents of the endemic Onosma malatyana roots collected from Malatya/Türkiye were determined using the hydrodistillation and the soxhlet methods and antimicrobial activity analysis of the extracts was also performed. The hydrodistillation method applied to the roots of O.malatyana resulted in identifying 31 compounds according to their retention times in GC-MS analysis. Additionally, crude ethyl acetate and crude oil etheric extracts of O.malatyana roots contained 14 compounds each. This research identified that the main component of the essential oil obtained by the hydrodistillation method was palmitic acid comprising 56.48% of the total composition. Additionally, in the crude petroleum etheric extract, oleic acid methyl ester (31.22%); and palmitic acid (24.69%) were identified as the main components in the crude ethyl acetate extract. The results of the antimicrobial activities indicated that O.malatyana root extracts were particularly effective against Gram-positive bacteria, specifically S. aureus and B. subtilis.

The study, conducted for the first time, sheds detailed light on the chemical composition and antimicrobial activity of Onosma malatyana roots, highlighting the potential pharmacological importance of the plant.The research, carried out using hydrodistillation and Soxhlet extraction methods, emphasizes the chemical diversity of the plant by identifying various organic compounds, particularly prominent ones such as palmitic acid.Antimicrobial tests show strong inhibitory effects, especially against Gram-positive bacteria like S.aureus and B.subtilis. This indicates the potential of crude petroleum etheric extract as a natural antimicrobial agent.The findings allow for a better understanding of the chemical diversity and pharmacological potential of O. malatyana, enabling future research to target the plant's phytochemical profile, antimicrobial compound mechanisms, and optimization of cultivation practices.

Innovative Use of an Injectable, Self-Healing Drug-Loaded Pectin-Based Hydrogel for Micro- and Supermicro-Vascular Anastomoses.

Microvascular surgery plays a crucial role in reconnecting micrometer-scale vessel ends. Suturing remains the gold standard technique for small vessels; however, suturing the collapsed lumen of microvessels is challenging and time-consuming, with the risk of misplaced sutures leading to failure. Although multiple solutions have been reported, the emphasis has predominantly been on resolving challenges related to arteries rather than veins, and none has proven superior. In this study, we introduce an innovative solution to address these challenges through the development of an injectable lidocaine-loaded pectin hydrogel by using computational and experimental methods. To understand the extent of interactions between the drug and the pectin chain, molecular dynamics (MD) simulations and quantum mechanics (QM) calculations were conducted in the first step of the research. Then, a series of experimental studies were designed to prepare lidocaine-loaded injectable pectin-based hydrogels, and their characterization was performed by using Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), and rheological analysis. After all the results were evaluated, the drug-loaded pectin-based hydrogel exhibiting self-healing properties was selected as a potential candidate for in vivo studies to determine its performance during operation. In this context, the hydrogel was injected into the divided vessel ends and perivascular area, allowing for direct suturing through the gel matrix. While our hydrogel effectively prevented vasospasm and facilitated micro- and supermicro-vascular anastomoses, it was noted that it did not cause significant changes in late-stage imaging and histopathological analysis up to 6 months. We strongly believe that pectin-based hydrogel potentially enhanced microlevel arterial, lymphatic, and particularly venous anastomoses.

Effects of melatonin, proline, and salicylic acid on seedling growth, photosynthetic activity, and leaf nutrients of sorghum under salt stress.

Soil salinization poses a significant challenge to the sustainability and productivity of agriculture worldwide. This issue continues to hinder plant growth, requiring innovative solutions to alleviate salt stress. Moreover, climate change accelerates soil salinization, which may soon spread to previously unaffected agricultural areas. Therefore, the present study evaluated the potential role of different seed priming agents (hydro (H), salicylic acid (SA), proline (P), and melatonin (MEL)) on seedlings and leaf macro and micronutrients of sorghum grown under four (.27, 2.5, 5.0, and 8.0 dS m-1) soil salinity conditions. Soil salinity drastically reduced all the growth parameters of sorghum seedlings, primarily the reduction in growth traits, which was remarkable after 2.5 dS m-1 soil salinity. In addition, plant height, shoot fresh weight, and stomata were reduced by 40.8%, 74.6%, and 36.5%, respectively, at 8.0 dS m-1 compared to .27 dS m-1. SA- and MEL-primed seeds mitigated the harmful effects of soil salinity by reducing Na+ accumulation in the leaves and increasing the K+/Na+ and Ca2+/Na+ ratios and photosynthetic activity under salt stress. However, the Zn2+, Mn2+, and Cu2+ contents of sorghum leaves increased with increasing soil salinity, and these nutrients also improved with seed priming by SA, MEL, and P. Considering all nutrients, MEL-primed sorghum seeds had better macro- and micro-nutrient uptake capacities than the H, SA, and P treatments under high soil salinity conditions. Finally, the present study showed that MEL-induced improvement in salt tolerance in sorghum seedlings was related to enhanced nutritional status, photosynthetic activity, and biomass production in salinized areas.

Spectrophotometric Analysis of Color Stability Induced by Various Calcium Silicate Cements in Full Pulpotomy of Permanent Molars: Theracal PT, Biodentine, and ProRoot MTA.

AIM: The objective of this study was to assess the color stability induced by Theracal PT, Biodentine, and ProRoot MTA in teeth subjected to full pulpotomy, over a span of 6 months. MATERIALS AND METHODS: The study employed a total of 48 freshly extracted intact human third molar teeth. Samples were randomly assigned into four groups (n = 12). All teeth, with the exception of the control group, underwent endodontic access. All materials were mixed in accordance with the manufacturer's guidelines and applied at a thickness of 3 mm at the orifice level before they set. The study groups were negative control (was not prepared), positive control (ProRootMTA), Biodentine, and Theracal PT. Glass ionomer and composite resin material was applied to the cavities. The color measurements were performed using the VITA Easy Shade spectrophotometer. All measurements were repeated 3 times in the determined area on the middle buccal surface of the tooth at baseline that (T0); after access preparation and material placement and setting) and then subsequently at 7 (T1), 30 (T2), 90 (T3), and T4 (180) days later. Data were statistically analyzed by using Kruskal-Wallis H at a confidence level of 95% (P < .05). RESULTS: Compared with the negative control group, Biodentine and Theracal PT showed color stability (ΔE ≤ 3.7). The teeth treated with MTA showed clinically observable discoloration (ΔE ≥ 3.7) at T0, T1, T2, T3, and T4 intervals. At all-time intervals, the MTA group induced more discoloration than Biodentine and Theracal PT (P < .05). CONCLUSIONS: Theracal PT and Biodentine caused least discoloration compared to PMTA even 6 months after its application in teeth undergoing pulpotomy, thereby offering clinicians a reliable alternative for use in the esthetic zone.

Short fiber reinforced composite on fracture strength of immature permanent anterior teeth with simulated regenerative endodontic procedures: an in vitro study.

The aim of the present study was to evaluate the effect of short fiber reinforced composite on the fracture strength of anterior immature teeth treated with regenerative endodontic procedures. A total of 120 permanent maxillary central incisors were selected, and root lengths were standardized. Except for the positive control group (n = 20), the root canals were instrumented to simulate immature teeth with incomplete root development, and the regenerative endodontic procedure was performed. Twenty instrumented teeth acted as negative controls (n = 20), and the remaining 80 teeth were randomly divided into 4 groups according to the chosen coronal restoration material: bulk fill, short fiber reinforced composite (SFRC), polyethylene fiber (Ribbond Ultra), and flowable composite resin. Each specimen was then subjected to fracture testing using a universal testing machine (AGS-X, Shimadzu, Japan). The load to fracture was recorded. Data were subjected to statistical analysis using analysis of variance and the Tukey Honestly Significant Difference test. A significant difference was detected between the groups (p < 0.05), with the positive control group showing the highest mean fracture strength. The SFRC group had significantly higher values than the bulk fill, polyethylene fiber, flowable composite resin and negative control groups. In conclusion, SFRC has a relatively high fracture strength compared to other materials used in regenerative endodontic procedures. The use of SFRC enhanced the fracture strength of immature permanent teeth.

The assessment of groundwater quality through the water quality and nitrate pollution indexes in northern Türkiye.

Groundwater is contaminated by anthropogenic factors such as industry, domestic waste, and excessive fertilizers. Groundwater samples, which were obtained from 50 different wells in July 2020, were used in this study. Thirteen hydrochemical properties, including electrical conductivity (EC), pH, total dissolved solids (TDS), total hardness (TH), nitrate NO3-, anions, and cations were analyzed. Also, types of groundwater were investigated via the Piper diagram. The groundwater was also evaluated for irrigation suitability using the sodium percentage (Na%), sodium adsorption ratio (SAR), Kelly's index (KI), residual sodium carbonate (RSC), potential salinity, magnesium hazard (MR), and permeability index (PI). The samples were assessed for drinking the suitability using the water quality index (WQI) and the nitrate pollution index (NPI). Geographic information systems (GIS) were used to create spatial distribution maps of irrigation water quality indices, WQI, and NPI values. The results of major cations varied sodium 28.69-211.80 mg/L, calcium 78.74-258.89 magnesium 27.78-161.30 mg/L, and potasium 0.10-3.57 mg/L. The results from the study area showed that 62.70 of EC, 32.40% of PI, 20.09% of RSC, 51.55% of PS, and 49.36% of MR were inappropriate for irrigation purposes. The NPI data ranged from - 0.75 to 9.65, and 21.06% of the study areas were heavily polluted. The WQI showed that almost 62.90% of the experimental area was categorized as poor, very poor, and inappropriate for drinking water purposes, whereas 37.10% of the areas were categorized as good and excellent.

The Effects of Calcium Silicate- and Calcium Hydroxide-based Root Canal Sealers on Postoperative Pain: A Randomized Clinical Trial.

INTRODUCTION: This study aimed to compare the postoperative pain level changes resulting from using calcium silicate- (EndoSeal MTA) and calcium hydroxide-based (Sealapex) root canal sealers in mandibular first and second molar teeth with symptomatic apical periodontitis. METHODS: A total of 60 patients with symptomatic apical periodontitis in their lower molar teeth were randomly allocated into 2 groups according to sealer type (n = 30). Demographic data, including gender, age, and smoking habit, and preoperative pain measures were recorded. Root canal treatments were performed in a single visit. Postoperative pain measurements and analgesic intake were measured at 6, 12, 24, and 48 hours and after 3, 5, and 7 days using the visual analog scale. The data were statistically analyzed using a chi-squared test (to compare gender, age, smoking habit, analgesic intake, and sealer extrusion), the Mann-Whitney U test (to compare pain levels), Friedman tests (for the evaluations of the reduction in pain levels over time), and Spearman's correlation test (to analyze the relationships of age, gender, smoking habit factors with postoperative pain) (P = .05). RESULTS: The statistical analysis showed no significant differences between the groups in postoperative pain and analgesic intake at any of the time intervals evaluated (P > .05). CONCLUSIONS: Patients treated with calcium silicate- and calcium hydroxide-based root canal sealers experienced similar postoperative pain and no statistically significant differences were observed in analgesic intake.

Bullous scabies, the light shed on etiopathogenesis and treatment: report of five paediatric cases.

Introduction: Bullous scabies (BS) is an infrequent and atypical presentation of scabies, with a predilection for elderly males. The mechanism of BS is not fully understood; superinfection, friction due to pruritus, autoeczemation, direct injury from mite's lytic enzymes, cross-reactivity of scabies protein with basal membrane zone antigens are considered to be possible reasons. Aim: To define clinical features of paediatric BS cases, which is an extremely rare subtype of scabies. Material and methods: This is a retrospective study of paediatric BS cases seen at two tertiary care centres. Previously described bacterial culture, antibiogram and follow-up records were investigated retrospectively. Confirmed scabies cases, according to the "International Alliance for the Control of Scabies (IACS)" with bullae were included. All cases were treated with 10% sulfur ointment for 3 consecutive days, two cycles. Households of cases were also treated simultaneously. Systemic antibiotics were added to patients with elevated acute phase reactants according to the antibiogram results. Informed consent was obtained from patients' parents. Results: Five BS cases were included. Three cases were male, two cases were female. Four cases had staphylococcus aureus, one had group-A beta haemolytic streptococcus positive bullae culture. All cases achieved a rapid complete resolution of symptoms after topical 10% sulfur ointment. Conclusions: Paediatric BS is an extremely rare entity of scabies. Bacterial superinfection plays a key role in bullae formation. 10% sulfur ointment is a highly effective treatment option for paediatric BS.

Micronutrient Deficiencies and Digital Computerized Phototrichogram Analysis in Telogen Effluvium: a Retrospective Correlation Study in a Tertiary Medical Center.

INTRODUCTION: Telogen effluvium (TE) is a common form of non-scarring alopecia that may manifest as acute or chronic hair shedding. Several studies evaluated a possible relationship between various vitamin and mineral deficiencies and TE, but it is still a controversial topic. OBJECTIVES: This study aimed to investigate the status of vitamin and mineral deficiencies in patients diagnosed with TE and to evaluate their correlation with anagen hair ratios (AHR) calculated with an automated digital phototrichogram (ADCP). METHODS: Electronic records of 973 TE patients were retrospectively analyzed. Demographic, clinical data, parameters such as ferritin, vitamin B12 (Vit-B12), vitamin D (Vit-D), folic acid, zinc and hemoglobin (HGB) serum levels were evaluated. Anagen to telogen hair ratios were also assessed in forty-two patients via ADCP. RESULTS: The rates of anemia, low ferritin level, and Vit-B12, folate, Vit-D, and zinc deficiencies were 11.9% (N = 109), 44% (N = 332), 1.5% (N = 13), 2.5% (N = 14), 87% (N = 51), and 4.5% (N = 2), respectively. A positive correlation was found between HGB levels and AHR in female patients (Spearman rank, r = 0.417, P = 0.008). No statistically significant relationship was found between ferritin, Vit-B12, folate, zinc serum levels and AHR. The relationship between Vit-D and AHR could not be assessed due to the insufficient number of patients with Vit-D data. CONCLUSIONS: HGB value is the only marker that is positively correlated with the AHR of patients with TE. Ordering HGB can be used as an initial test for managing TE patients cost-effectively.