Nanohybrid Based on (Mn, Zn) Ferrite Nanoparticles Functionalized With Chitosan and Sodium Alginate for Loading of Curcumin Against Human Breast Cancer Cells.

This study reports on the synthesis of Mn1 - xZnxFe2O4 (Mn, Zn ferrite) magnetic nanoparticles (MNPs) as drug delivery carriers for effective therapeutic outcomes. The MNPs were prepared using the coprecipitation method, and their magnetic properties were investigated based on their composition. Among the compositions tested, Mn0.8Zn0.2Fe2O4 MNPs exhibited superparamagnetic properties with a saturation magnetization moment of 34.6 emu/g at room temperature (25°C). To enhance the water solubility of curcumin (Cur), known for its hydrophobic nature, it was successfully loaded onto alginate (Alg)/chitosan (Chit)@Mn0.8Zn0.2Fe2O4 nanoparticles (NPs). The nanocomposite was characterized by field emission scanning electron microscopy (FE-SEM) which revealed a particle size of approximately 20 nm. The crystalline structure of the NPs was analyzed using X-ray diffraction, while Fourier-transform infrared (FTIR), energy-dispersive X-ray, and map analysis techniques were employed for further characterization. In terms of drug release, there was an initial burst release of Cur (around 18%) within the first hour, followed by a slower release (approximately 61%) over the next 36 h. The anti-tumor properties of the Cur-loaded NPs were evaluated using the Methyl Thiazol Tetrazolium (MTT) assay and quantitative real-time polymerase chain reaction. The MTT assay confirmed a higher cytotoxic effect of Cur-loaded Alg/Chit@Mn0.8Zn0.2Fe2O4 NPs on the MCF-7 breast cancer cell line compared to free Cur, highlighting the significance of incorporating Cur into nano-sized carrier systems.

Comparative Evaluation of the Powder and Tableting Properties of Regular and Direct Compression Hypromellose from Different Vendors.

Hypromellose, a widely used polymer in the pharmaceutical industry, is available in several grades, depending on the percentage of substitution of the methoxyl and hydroxypropyl groups and molecular weight, and in various functional forms (e.g., suitable for direct compression tableting). These differences can affect their physicomechanical properties, and so this study aims to characterise the particle size and mechanical properties of HPMC K100M polymer grades from four different vendors. Eight polymers (CR and DC grades) were analysed using scanning electron microscopy (SEM) and light microscopy automated image analysis particle characterisation to examine the powder's particle morphology and particle size distribution. Bulk density, tapped density, and true density of the materials were also analysed. Flow was determined using a shear cell tester. Flat-faced polymer compacts were made at five different compression forces and the mechanical properties of the compacts were evaluated to give an indication of the powder's capacity to form a tablet with desirable strength under specific pressures. The results indicated that the CR grades of the polymers displayed a smaller particle size and better mechanical properties compared to the DC grade HPMC K100M polymers. The DC grades, however, had better flow properties than their CR counterparts. The results also suggested some similarities and differences between some of the polymers from the different vendors despite the similarity in substitution level, reminding the user that care and consideration should be given when substitution is required.

Carrier-Free Inhalable Dry Microparticles of Celecoxib: Use of the Electrospraying Technique.

Upregulation of cyclooxygenase (COX-2) plays an important role in lung cancer pathogenesis. Celecoxib (CLX), a selective COX-2 inhibitor, may have beneficial effects in COVID-19-induced inflammatory storms. The current study aimed to develop carrier-free inhalable CLX microparticles by electrospraying as a dry powder formulation for inhalation (DPI). CLX microparticles were prepared through an electrospraying method using a suitable solvent mixture at two different drug concentrations. The obtained powders were characterized in terms of their morphology, solid state, dissolution behavior, and aerosolization performance. Electrosprayed particles obtained from the ethanol-acetone solvent mixture with a drug concentration of 3 % w/v exhibited the best in vitro aerosolization properties. The value of the fine particle fraction obtained for the engineered drug particles was 12-fold higher than that of the untreated CLX. When the concentration of CLX was increased, a remarkable reduction in FPF was obtained. The smallest median mass aerodynamic diameter was obtained from the electrosprayed CLX at a 3% concentration (2.82 µm) compared to 5% (3.25 µm) and untreated CLX (4.18 µm). DSC and FTIR experiments showed no change in drug crystallinity or structure of the prepared powders during the electrospraying process. The findings of this study suggest that electrospraying has potential applications in the preparation of DPI formulations.

Inhalation phage therapy as a new approach to preventing secondary bacterial pneumonia in patients with moderate to severe COVID-19: A double-blind clinical trial study.

Inhalation phage therapy is proposed as a replacement approach for antibiotics in the treatment of pulmonary bacterial infections. This study investigates phage therapy on bacterial pneumonia in patients with moderate to severe COVID-19 via the inhalation route. In this double-blind clinical trial, 60 patients with positive COVID-19 hospitalized in three central Mazandaran hospitals were chosen and randomly divided into two intervention and control groups. Standard country protocol drugs plus 10 mL of phage suspension every 12 h with a mesh nebulizer was prescribed for 7 days in the intervention group. The two groups were compared in terms of O2Sat, survival rate, severe secondary pulmonary bacterial infection and duration of hospitalization. Comparing the results between the intervention and control group, in terms of the trend of O2Sat change, negative sputum culture, no fever, no dyspnea, duration of hospitalization, duration of intubation and under ventilation, showed that the difference between these two groups was statistically different (P value < 0.05). In conclusion, inhalation phage therapy may have a potential effect on secondary infection and in the outcome of COVID-19 patients. However, more clinical trials with control confounding factors are needed to further support this concept.

Preparation of porous PCL-PEG-PCL scaffolds using supercritical carbon dioxide.

In this study, the Supercritical Carbon Dioxide (scCO2) gas foaming procedure was used in the preparation of scaffolds containing the model drug dexamethasone (DXMT). The method used did not include an organic solvent thus making it a safe method. The ring-opening polymerization of PCL-PEG-PCL (PCEC) triblock was conducted using an organocatalyst [1,8 diazabicyclo [5.4.0] undec-7-ene (DBU)]. After mixing 5.0 g of DXMT with 50.0 g of PCEC, hydraulic pressure was applied to compress the mixed powder into disc-like tablets. The tablet-like scaffold of the triblock containing DXMT was inserted into a scCO2 gas-foaming device. The peak porosity percentage of the synthesized triblock was found to be 55.58 %. Pressure, temperature, soaking time and the time required to depressurize were recorded as 198 bar, 50 °C, 2.0 h, and 28 min respectively. After treatment with scCO2, the scaffolds experienced an almost full release of DXMT in vitro after 30 days (83.74 ± 1.54 % vs 52.24 ± 2.03 % before scCO2 treatment). In conclusion, the results proved that the scCO2 gas foaming procedure could be employed for constructing modifiable PCEC scaffolds with plausible porosity and structural and morphological features which can manipulate drug release.

A review on the latest developments of mesoporous silica nanoparticles as a promising platform for diagnosis and treatment of cancer.

Cancer is the second cause of human mortality after cardiovascular disease around the globe. Conventional cancer therapies are chemotherapy, radiation, and surgery. In fact, due to the lack of absolute specificity and high drug concentrations, early recognition and treatment of cancer with conventional approaches have become challenging issues in the world. To mitigate against the limitations of conventional cancer chemotherapy, nanomaterials have been developed. Nanomaterials exhibit particular properties that can overcome the drawbacks of conventional therapies such as lack of specificity, high drug concentrations, and adverse drug reactions. Among nanocarriers, mesoporous silica nanoparticles (MSNs) have gained increasing attention due to their well-defined pore size and structure, high surface area, good biocompatibility and biodegradability, ease of surface modification, and stable aqueous dispersions. This review highlights the current progress with the use of MSNs for the delivery of chemotherapeutic agents for the diagnosis and treatment of cancer. Various stimuli-responsive gatekeepers, which endow the MSNs with on-demand drug delivery, surface modification strategies for targeting purposes, and multifunctional MSNs utilized in drug delivery systems (DDSs) are also addressed. Also, the capability of MSNs as flexible imaging platforms is considered. In addition, physicochemical attributes of MSNs and their effects on cancer therapy with a particular focus on recent studies is emphasized. Moreover, major challenges to the use of MSNs for cancer therapy, biosafety and cytotoxicity aspects of MSNs are discussed.

Dry Powder Formulation of Simvastatin Nanoparticles for Potential Application in Pulmonary Arterial Hypertension.

It has been hypothesized that simvastatin could be used to treat pulmonary arterial hypertension (PAH). This study is intended to formulate a simvastatin nanoparticle dry powder inhalation (DPI) formulation. Simvastatin nanoparticles were prepared via an emulsification and homogenization-extrusion method, followed by spray drying of the colloidal suspension of simvastatin nanoparticles containing mannitol to get it into a respirable size. Particle size distribution, morphology, and crystallinity of the fabricated nanoparticles of the obtained microparticles for DPI formulation were assessed by dynamic light scattering (DLS), scanning electron microscopy (SEM), and X-ray diffraction pattern (XRPD), respectively. Aerosolization performance of the DPI formulation was assessed by the Next Generation Impactor (NGI) equipped with an Aerolizer®. Simvastatin nanoparticles were around 100 nm with a very narrow size distribution (PDI = 0.105). The X-ray diffraction pattern revealed that the crystallinity of simvastatin was decreased by the spray drying procedure. Microscopic images displayed that gathered nanoparticles were in the suitable inhalable range and had the appropriate shape and surface properties for pulmonary delivery. Aerosolization assessment by the NGI indicated a suitable inhalation performance (fine particle fraction of 20%). In conclusion, the results confirmed that the spray drying technique for simvastatin can be optimized to obtain simvastatin aggregated nanoparticles without any coarse carrier to be used in DPI formulation for better deposition of the drug in the lungs for local treatment of PAH.

Solid lipid nanoparticles and nanostructured lipid carriers: a review of the methods of manufacture and routes of administration.

The bioavailability of drugs is dependent on several factors such as solubility and the administration route. A drug with poor aqueous solubility, therefore, poses challenges with regards to its pharmaceutical advance and ultimately its biological usage. Lipid nanoparticles have been used in pharmaceutical science due to their importance in green chemistry. Their biochemical properties as 'green' materials and biochemical processes as 'green' processes mean they can be environmentally sustainable. Generally, lipid nanoparticles can be employed as carriers for both lipophilic and hydrophilic drugs. The proposed administration route for nanoparticles can present advantages and disadvantages which should be considered by a formulator. Solid lipid nanoparticles (SLNs) and nanostructured lipid carriers (NLCs) are attractive delivery systems because of their ease of manufacture, biocompatibility, biodegradability, and scale-up capacity of formulation constituents. The easy and simple scalability of novel SLNs and nano lipid carriers, along with their various processing procedures, recent developments, limitation and toxicity, formulation optimization and approaches for the manufacture of lipid nanoparticles, lyophilization and drug release are comprehensively discussed in this review. This review also summarizes the research data related to the various preparation methods and excipients used for SLNs and NLCs in recent years.

Venlafaxine HCl Encapsulated in Niosome: Green and Eco-friendly Formulation for the Management of Pain.

The goal of this experimentation was to increase the cutaneous absorption of venlafaxine HCl (VFX) encapsulated in a niosome (venlasosme) produced by an ultrasonic approach. The impact of the cholesterol:surfactant (Chol:Surf) proportion was examined to modify the venlasosme properties. Photon correlation spectroscopy, powder X-ray diffraction (PXRD), SEM, DSC, and ATR-FTIR spectroscopy were utilized to investigate the solid-state and morphology of VFX in the venlasosme. The studies revealed that increasing the level of Chol in the venlasosme increased the size of the particles. Alterations in the Chol to surfactant ratios (when Chol decreased from 2.5 to 0%) caused the zeta potential enhancement from 7.37 ± 0.67 to 15.53 ± 1.47 mV. The venlasosme with the highest cholesterol concentration (2.5%) had the highest encapsulation efficiency (approximately 63%). PXRD results revealed that VFX in venlasosme was in the amorphous form. The levels of VFX in the cutaneous layers and the receiver compartment were higher for the venlasosme gel than for VFX simple gel in the cutaneous permeability study and showed no cutaneous irritancy in rats. Furthermore, the venlasosme gel demonstrated significant antinociceptive and anti-inflammatory responses when compared to the control groups (VFX simple gel and diclofenac gel). The topical administration of the venlasosme gel also considerably increased the tail-flick and hot-plate response time when compared to the VFX simple gel, control groups, and diclofenac gel (p < 0.05). These findings suggest that niosomes can improve VFX efficacy as an antinociceptive and anti-inflammatory substance by improving the medicaments delivery to the specified site.

Atorvastatin Entrapped Noisome (Atrosome): Green Preparation Approach for Wound Healing.

The present study aimed to formulate atorvastatin niosome (Atrosome) through an ultrasonic technique and to determine its contribution to the extent of wound healing in an animal model. The optimized Atrosome formulation (Atrosome-2) was stable at 4 °C for 3 months. Differential scanning calorimetry (DSC), ATR-Fourier transform infrared spectroscopy (ATR-FTIR), and powder X-ray diffraction (PXRD) analysis revealed that atorvastatin (ATR) was well encapsulated within the niosomes either in a stabilized amorphous form or a molecularly dispersed state. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), and atomic force microscope (AFM) confirmed the spherical nature of the Atrosomes. The optimized formulation showed polydispersity index, particle size, drug encapsulation efficiency (EE%), and zeta potential of 0.457 ± 0.05, 196.33 ± 6.45 nm, 86.15 ± 0.58 %, and - 20.73 ± 0.98 mV, respectively. ATR release from the Atrosome gel followed the first-order kinetic model and showed no cytotoxicity in the in vitro cytotoxicity test. Cell viability (human foreskin fibroblast cell line) was nearly 99%. An excision wound model was also applied in male Wistar rats to examine the in vivo efficacy of the optimized formulation, followed by investigating malondialdehyde (MDA, an end-product of lipid peroxidation), superoxide dismutase (SOD, an endogenous antioxidant), hydroxyproline levels, and glutathione peroxidase (GPx) in skin tissue samples. MDA significantly decreased in the Atrosome gel group after 21 days, while GPx, SOD, and hydroxyproline levels demonstrated an increase. According to histological results, rats receiving Atrosomes were treated effectively faster when compared to the other formulation used.

Innovative topical niosomal gel formulation containing diclofenac sodium (niofenac).

The purpose of this research was to enhance the transdermal delivery of diclofenac sodium niosomal formulations. To characterise the obtained niosomes, SEM, XRPD, DSC and ATR-FTIR were employed. The size of the niosomes increased from 158.00 ± 6.17 to 400.87 ± 4.99 nm when cholesterol was incorporated into the formulations. It was observed that the zeta potential of niofenac varies from -25.40 ± 1.352 to -43.13 ± 1.171 mV when the cholesterol percentage decreased from 2% to 0.2%. The higher entrapment efficiency percentage (63.70 ± 0.18%) was obtained for the formulations with larger particle sizes and higher cholesterol content. The optimised niofenac formulation showed a controlled release fashion where 61.71 ± 0.59% of the drug released within 24 h. The results showed that the value of permeated diclofenac sodium through the skin layers was higher for the niofenac gel formulation (242.3 ± 31.11 µg/cm2) compared to simple gel formulation (127.40 ± 27.80 µg/cm2). Besides, niofenac formulation outperformed the anti-inflammatory activities in the formalin test compared to the control and diclofenac simple gel group. The licking time was significantly lower in both early (40.2 ± 7.3 s) and late stages (432.4 ± 31.7 s) for niofenac compared to conventional formulation (early stage 130.4 ± 8.73 s and late stage 660.6 ± 123.73 s). This study indicates that niosomal formulations can improve drug therapeutic effects by increasing drug delivery to specific sites.

An updated review of folate-functionalized nanocarriers: A promising ligand in cancer.

The uncontrolled release of drugs in conventional drug delivery systems has led to the introduction of new nanotechnology-based drug delivery systems and the use of targeted nanocarriers for cancer treatment. These targeted nanocarriers, which consist of intelligent nanoparticles modified with targeting ligands, can deliver drugs to specified locations at the right time and reduce drug doses to prevent side effects. Folate is a suitable targeting ligand for folate receptors overexpressed on cancer cells and has shown promising results in the diagnosis and treatment of cancer. In this review, we highlight the latest developments on the use of folate-conjugated nanoparticles in cancer diagnosis and treatment. Moreover, the toxicity, biocompatibility and efficacy of these nanocarriers are discussed.

Loading Pistacia atlantica essential oil in solid lipid nanoparticles and its effect on apoptosis of breast cancer cell line MDA-MB-231.

Pistacia atlantica has an anti-cancer effect due to its essential oil which is the major constituent of P. atlantica. Unfortunately, this essential oil evaporates easily and makes it less effective. The current research, therefore, aimed to improve the anti-cancer effect of P. atlantica essential oil (PAEO) in solid lipid nanoparticles (SLN). The chemical components of PAEO were assessed by gas chromatography. PAEO-SLNs were prepared by the probe-ultrasonication method, and their particle size, polydispersity index and zeta potential were determined. Encapsulation Efficiency (EE%) and Loading Capacity (LC%) of formulations was also calculated. Transmission electron microscopy was employed to determine the morphology of optimal formulation (PAEO-SLN4). Furthermore, the anticancer effects of PAEO-SLN4 against MDA-MB-231 cells were evaluated by cellular assays. The results showed that the type of surfactant and loading of the essential oil had a significant effect on size distribution, zeta potential and the polydispersity index. The encapsulation efficiency (EE%) and loading capacity for PAEO-SLN4 were 97.3% and 9.6%, respectively. The cellular assay demonstrates that PAEO-SLN4 could lead MDA-MB-231 cells to apoptosis. The findings also revealed that PAEO-SLN4 can stimulate apoptosis in MDA-MB-231 cells more than the placebo and free PAEO thereby indicating PAEO-SLN4 to be beneficial in breast cancer treatment.

Role of nanostructured lipid carriers in the expression alterations of ATP-binding cassette transporter genes in fluconazole-resistant Candida glabrata.

Introduction: This study was proposed to assess the potential role of efflux transporters in reversing fluconazole resistance in Candida glabrata isolates treated with fluconazole loaded nanostructured lipid carriers (FLZ-NLCs). Methods: The ultrasound technique was used to synthesize the FLZ-NLCs. Four fluconazole-resistant, as well as one susceptible standard C. glabrata isolates, were applied and exposed to FLZ/ FLZ-NLCs for 20 h at 37°C. Real-time PCRs were done to estimate the likely changes in ATP-binding cassette transporter genes. Results: Similar to the FLZ-exposed-susceptible standard strain which showed no alteration, the genes were not up-regulated significantly under the FLZ-NLCs treated condition. While they were over-expressed when the yeasts were treated with fluconazole. Conclusion: It is highly suggested that due to the nature of the NLCs which shields the whole conformation of the drug, FLZ is not recognized by the efflux transporter subunits and consequently the translocation would not happen.

Solubility Study of Acetylsalicylic Acid in Ethanol + Water Mixtures: Measurement, Mathematical Modeling, and Stability Discussion.

Solubility determination of poorly water-soluble drugs is pivotal for formulation scientists when they want to develop a liquid formulation. Performing such a test with different ratios of cosolvents with water is time-consuming and costly. The scarcity of solubility data for poorly water-soluble drugs increases the importance of developing correlation and prediction equations for these mixtures. Therefore, the aim of the current research is to determine the solubility of acetylsalicylic acid in binary mixtures of ethanol+water at 25 and 37°C. Acetylsalicylic acid is non-stable in aqueous solutions and readily hydrolyze to salicylic acid. So, the solubility of acetylsalicylic acid is measured in ethanolic mixtures by HPLC to follow the concentration of produced salicylic acid as well. Moreover, the solubility of acetylsalicylic acid is modeled using different cosolvency equations. The measured solubility data were also predicted using PC-SAFT EOS model. DSC results ruled out any changes in the polymorphic form of acetylsalicylic acid after the solubility test, whereas XRPD results showed some changes in crystallinity of the precipitated acetylsalicylic acid after the solubility test. Fitting the solubility data to the different cosolvency models showed that the mean relative deviation percentage for the Jouyban-Acree model was less than 10.0% showing that this equation is able to obtain accurate solubility data for acetylsalicylic acid in mixtures of ethanol and water. Also, the predicted data with an average mean relative deviation percentage (MRD%) of less than 29.65% show the capability of the PC-SAFT model for predicting solubility data. A brief comparison of the solubilities of structurally related solutes to acetylsalicylic acid was also provided.

Metronidazole- and Amoxicillin-Loaded PLGA and PCL Nanofibers as Potential Drug Delivery Systems for the Treatment of Periodontitis: In Vitro and In Vivo Evaluations.

The purpose of this study was to prepare poly (D-L) lactide-co-glycolide (PLGA) and poly ε-caprolactone (PCL) nanofibers containing metronidazole and amoxicillin using an electrospinning process as intrapocket sustained-release drug delivery systems for the treatment of periodontal diseases. Scanning electron microscopy showed that the drug containing PLGA and PCL nanofibers produced from the electrospinning process was uniform and bead-free in morphology. The obtained nanofibers had a strong structure and resisted external tension according to the tensiometry results. The cytotoxicity results indicated acceptable cell viability (>80%). Quantification by high-performance liquid chromatography showed almost complete in vitro drug release between 7 and 9 days, whereas 14 days were required for complete drug release in vivo. No significant signs of irritation or inflammatory reaction were detected after three weeks of subcutaneous implantation of nanofibers in the animal models, thus indicating suitable compatibility. The results therefore suggest that the designed nanofibers can be used as potential commercial formulations in the treatment of periodontitis as controlled-release intrapocket drug delivery systems that can increase patient compliance. This is due to their ability to reduce the frequency of administration from three times daily in a systemic manner to once weekly as local delivery.

Encapsulation of bacteriophage cocktail into chitosan for the treatment of bacterial diarrhea.

The therapeutic effectiveness of a chitosan encapsulated bacteriophage cocktail as a smart biocontrol agent was evaluated in this study to be used as a preventative and treatment option for gastrointestinal infections. To evaluate the effect of the bacteriophage formulation on the treatment of gastrointestinal infection, rats were infected with Salmonella enterica, Shigella flexneri, and Escherichia coli. The rats were weighed and their stools cultured. The results showed that the group which had the chitosan encapsulated bacteriophage cocktail did not lose weight after 3 days and had significantly lower group weight changes. Weight loss was significant in the rats that had cefixime administered instead. Positive cultured stools were reduced after 4 days compared to 2 days in the treated group with the chitosan encapsulated bacteriophage cocktail. The chitosan encapsulated bacteriophage cocktail can therefore be effective in the treatment of gastrointestinal infections.

Application of UV dissolution imaging to pharmaceutical systems.

UV-vis spectrometry is widely used in the pharmaceutical sciences for compound quantification, alone or in conjunction with separation techniques, due to most drug entities possessing a chromophore absorbing light in the range 190-800 nm. UV dissolution imaging, the scope of this review, generates spatially and temporally resolved absorbance maps by exploiting the UV absorbance of the analyte. This review aims to give an introduction to UV dissolution imaging and its use in the determination of intrinsic dissolution rates and drug release from whole dosage forms. Applications of UV imaging to non-oral formulations have started to emerge and are reviewed together with the possibility of utilizing UV imaging for physical chemical characterisation of drug substances. The benefits of imaging drug diffusion and transport processes are also discussed.

Polyvinyl Alcohol/Chitosan Single-Layered and Polyvinyl Alcohol/Chitosan/Eudragit RL100 Multi-layered Electrospun Nanofibers as an Ocular Matrix for the Controlled Release of Ofloxacin: an In Vitro and In Vivo Evaluation.

A novel nanofiber insert was prepared with a modified electrospinning method to enhance the ocular residence time of ofloxacin (OFX) and to provide a sustained release pattern by covering hydrophilic polymers, chitosan/polyvinyl alcohol (CS/PVA) nanofibers, with a hydrophobic polymer, Eudragit RL100 in layers, and by glutaraldehyde (GA) cross-linking of CS-PVA nanofibers for the treatment of infectious conjunctivitis. The morphology of the prepared nanofibers was studied using scanning electron microscopy (SEM). The average fiber diameter was found to be 123 ± 23 nm for the single electrospun nanofiber with no cross-linking (OFX-O). The single nanofibers, cross-linked for 10 h with GA (OFX-OG), had an average fiber diameter of 159 ± 30 nm. The amount of OFX released from the nanofibers was measured in vitro and in vivo using UV spectroscopy and microbial assay methods against Staphylococcus aureus, respectively. The antimicrobial efficiency of OFX formulated in cross-linked and non-cross-linked nanofibers was affirmed by observing the inhibition zones of Staphylococcus aureus and Escherichia coli. In vivo studies using the OFX nanofibrous inserts on a rabbit eye confirmed a sustained release pattern for up to 96 h. It was found that the cross-linking of the nanofibers by GA vapor could reduce the burst release of OFX from OFX-loaded CS/PVA in one layer and multi-layered nanofibers. In vivo results showed that the AUC0-96 for the nanofibers was 9-20-folds higher compared to the OFX solution. This study thus demonstrates the potential of the nanofiber technology is being utilized to sustained drug release in ocular drug delivery systems.

Magnesium Aluminium Silicate-Metformin Hydrochloride Complexes - The Use of Isothermal Calorimetry for Probing Clay and Drug Nanocomplexations.

BACKGROUND: Studying complexation between a wide variety of drugs and clay is of high importance in expanding the knowledge about controlled drug delivery and its exploitation. This study reports the use of isothermal calorimetry (ITC) in understanding the complexation process occurring between magnesium aluminium silicate (MAS) and metformin hydrochloride (MET), as a potentially controlled release drug delivery system. OBJECTIVES: To fully characterise and understand the complexes formed between MAS and MET and how that might impact on controlled release systems. METHODS: MAS and MET complex dispersions and particles were formulated and analysed using ITC, DSC, XRPD, ATR-FTIR, SEM/EDX, digital microscopy and 2D-SAXS. RESULTS: The calorimetric results confirmed the binding between MET and MAS at various pHs (5, 7 and 9) and temperatures (25 ºC and 37 ºC). The overall change in enthalpy was found to be exothermic with a comparatively small entropic contribution to the total change in Gibbs free energy, implying that the binding was an enthalpically driven process. These findings suggest that the binding process was dominated by hydrogen bonding and electrostatic interactions. pH and temperature variation did not have a great impact on the binding, as observed from the similarity in enthalpy (ΔH), entropy (ΔS) or Gibbs free energy (ΔG), with the reaction being only slightly more exothermic at pH 5 and at 37 ºC. 2D-SAXS was able to differentiate between MAS particulates and MAS-MET complexes when analysed in their liquid form suggesting the importance of appropriate methodology and instrumentation used in characterisation. CONCLUSION: ITC was successfully used in understanding the complexation process occurring between MAS and MET. Care and consideration however should thus be taken in the accurate determination and characterisation techniques for the formation of complexes for controlled release using MAS.